1 |
|
---|
2 | --------------------------------------------------------------------------------
|
---|
3 | root@debian:~# fdisk -lu /dev/sda
|
---|
4 |
|
---|
5 | Disk /dev/sda: 465.8 GiB, 500106780160 bytes, 976771055 sectors
|
---|
6 | Units: sectors of 1 * 512 = 512 bytes
|
---|
7 | Sector size (logical/physical): 512 bytes / 512 bytes
|
---|
8 | I/O size (minimum/optimal): 512 bytes / 512 bytes
|
---|
9 | Disklabel type: dos
|
---|
10 | Disk identifier: 0x5a5f4a0d
|
---|
11 |
|
---|
12 | Device Boot Start End Sectors Size Id Type
|
---|
13 | /dev/sda1 * 2048 1431551 1429504 698M 7 HPFS/NTFS/exFAT
|
---|
14 | /dev/sda2 43046976 552500046 509453071 242.9G 7 HPFS/NTFS/exFAT
|
---|
15 | /dev/sda3 552501248 553644031 1142784 558M 27 Hidden NTFS WinRE
|
---|
16 | /dev/sda4 553650176 976764927 423114752 201.8G 7 HPFS/NTFS/exFAT
|
---|
17 |
|
---|
18 | --------------------------------------------------------------------------------
|
---|
19 |
|
---|
20 | smartctl 6.4 2014-10-07 r4002 [i686-linux-3.16.0-4-586] (local build)
|
---|
21 | Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
22 |
|
---|
23 | === START OF INFORMATION SECTION ===
|
---|
24 | Model Family: Seagate Barracuda 7200.11
|
---|
25 | Device Model: ST3500320AS
|
---|
26 | Serial Number: 9QM7K500
|
---|
27 | LU WWN Device Id: 5 000c50 0105b787d
|
---|
28 | Firmware Version: SD1A
|
---|
29 | User Capacity: 500,106,780,160 bytes [500 GB]
|
---|
30 | Sector Size: 512 bytes logical/physical
|
---|
31 | Rotation Rate: 7200 rpm
|
---|
32 | Device is: In smartctl database [for details use: -P show]
|
---|
33 | ATA Version is: ATA8-ACS T13/1699-D revision 4
|
---|
34 | SATA Version is: SATA 2.6, 3.0 Gb/s
|
---|
35 | Local Time is: Sat Feb 12 13:38:42 2022 UTC
|
---|
36 | SMART support is: Available - device has SMART capability.
|
---|
37 | SMART support is: Enabled
|
---|
38 |
|
---|
39 | === START OF READ SMART DATA SECTION ===
|
---|
40 | SMART overall-health self-assessment test result: PASSED
|
---|
41 |
|
---|
42 | General SMART Values:
|
---|
43 | Offline data collection status: (0x82) Offline data collection activity
|
---|
44 | was completed without error.
|
---|
45 | Auto Offline Data Collection: Enabled.
|
---|
46 | Self-test execution status: ( 41) The self-test routine was interrupted
|
---|
47 | by the host with a hard or soft reset.
|
---|
48 | Total time to complete Offline
|
---|
49 | data collection: ( 634) seconds.
|
---|
50 | Offline data collection
|
---|
51 | capabilities: (0x7b) SMART execute Offline immediate.
|
---|
52 | Auto Offline data collection on/off support.
|
---|
53 | Suspend Offline collection upon new
|
---|
54 | command.
|
---|
55 | Offline surface scan supported.
|
---|
56 | Self-test supported.
|
---|
57 | Conveyance Self-test supported.
|
---|
58 | Selective Self-test supported.
|
---|
59 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
60 | power-saving mode.
|
---|
61 | Supports SMART auto save timer.
|
---|
62 | Error logging capability: (0x01) Error logging supported.
|
---|
63 | General Purpose Logging supported.
|
---|
64 | Short self-test routine
|
---|
65 | recommended polling time: ( 1) minutes.
|
---|
66 | Extended self-test routine
|
---|
67 | recommended polling time: ( 118) minutes.
|
---|
68 | Conveyance self-test routine
|
---|
69 | recommended polling time: ( 2) minutes.
|
---|
70 | SCT capabilities: (0x103b) SCT Status supported.
|
---|
71 | SCT Error Recovery Control supported.
|
---|
72 | SCT Feature Control supported.
|
---|
73 | SCT Data Table supported.
|
---|
74 |
|
---|
75 | SMART Attributes Data Structure revision number: 10
|
---|
76 | Vendor Specific SMART Attributes with Thresholds:
|
---|
77 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
---|
78 | 1 Raw_Read_Error_Rate 0x000f 119 091 006 Pre-fail Always - 216491860
|
---|
79 | 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
|
---|
80 | 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3238
|
---|
81 | 5 Reallocated_Sector_Ct 0x0033 094 094 036 Pre-fail Always - 133
|
---|
82 | 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 642560637
|
---|
83 | 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 18609
|
---|
84 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 4
|
---|
85 | 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 3041
|
---|
86 | 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
|
---|
87 | 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 248
|
---|
88 | 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 25770197043
|
---|
89 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
---|
90 | 190 Airflow_Temperature_Cel 0x0022 060 055 045 Old_age Always - 40 (Min/Max 39/40)
|
---|
91 | 194 Temperature_Celsius 0x0022 040 045 000 Old_age Always - 40 (0 8 0 0 0)
|
---|
92 | 195 Hardware_ECC_Recovered 0x001a 041 033 000 Old_age Always - 216491860
|
---|
93 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 27
|
---|
94 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 27
|
---|
95 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 53
|
---|
96 |
|
---|
97 | SMART Error Log Version: 1
|
---|
98 | ATA Error Count: 248 (device log contains only the most recent five errors)
|
---|
99 | CR = Command Register [HEX]
|
---|
100 | FR = Features Register [HEX]
|
---|
101 | SC = Sector Count Register [HEX]
|
---|
102 | SN = Sector Number Register [HEX]
|
---|
103 | CL = Cylinder Low Register [HEX]
|
---|
104 | CH = Cylinder High Register [HEX]
|
---|
105 | DH = Device/Head Register [HEX]
|
---|
106 | DC = Device Command Register [HEX]
|
---|
107 | ER = Error register [HEX]
|
---|
108 | ST = Status register [HEX]
|
---|
109 | Powered_Up_Time is measured from power on, and printed as
|
---|
110 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
---|
111 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
---|
112 |
|
---|
113 | Error 248 occurred at disk power-on lifetime: 18290 hours (762 days + 2 hours)
|
---|
114 | When the command that caused the error occurred, the device was active or idle.
|
---|
115 |
|
---|
116 | After command completion occurred, registers were:
|
---|
117 | ER ST SC SN CL CH DH
|
---|
118 | -- -- -- -- -- -- --
|
---|
119 | 40 51 00 2e 3c 8c 00 Error: WP at LBA = 0x008c3c2e = 9190446
|
---|
120 |
|
---|
121 | Commands leading to the command that caused the error were:
|
---|
122 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
---|
123 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
---|
124 | 61 00 08 ff ff ff 4f 00 00:37:12.405 WRITE FPDMA QUEUED
|
---|
125 | 61 00 40 30 9c cf 4d 00 00:37:12.403 WRITE FPDMA QUEUED
|
---|
126 | 61 00 08 ff ff ff 4f 00 00:37:12.403 WRITE FPDMA QUEUED
|
---|
127 | 60 00 08 28 3c 8c 40 00 00:37:12.402 READ FPDMA QUEUED
|
---|
128 | 61 00 10 ff ff ff 4f 00 00:37:12.401 WRITE FPDMA QUEUED
|
---|
129 |
|
---|
130 | Error 247 occurred at disk power-on lifetime: 18290 hours (762 days + 2 hours)
|
---|
131 | When the command that caused the error occurred, the device was active or idle.
|
---|
132 |
|
---|
133 | After command completion occurred, registers were:
|
---|
134 | ER ST SC SN CL CH DH
|
---|
135 | -- -- -- -- -- -- --
|
---|
136 | 40 51 00 2e 3c 8c 00 Error: UNC at LBA = 0x008c3c2e = 9190446
|
---|
137 |
|
---|
138 | Commands leading to the command that caused the error were:
|
---|
139 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
---|
140 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
---|
141 | 60 00 90 ff ff ff 4f 00 00:37:08.552 READ FPDMA QUEUED
|
---|
142 | 60 00 18 ff ff ff 4f 00 00:37:08.552 READ FPDMA QUEUED
|
---|
143 | 60 00 00 ff ff ff 4f 00 00:37:08.552 READ FPDMA QUEUED
|
---|
144 | 60 00 00 ff ff ff 4f 00 00:37:08.551 READ FPDMA QUEUED
|
---|
145 | 60 00 00 ff ff ff 4f 00 00:37:08.551 READ FPDMA QUEUED
|
---|
146 |
|
---|
147 | Error 246 occurred at disk power-on lifetime: 18290 hours (762 days + 2 hours)
|
---|
148 | When the command that caused the error occurred, the device was active or idle.
|
---|
149 |
|
---|
150 | After command completion occurred, registers were:
|
---|
151 | ER ST SC SN CL CH DH
|
---|
152 | -- -- -- -- -- -- --
|
---|
153 | 40 51 00 61 3c 8c 00 Error: UNC at LBA = 0x008c3c61 = 9190497
|
---|
154 |
|
---|
155 | Commands leading to the command that caused the error were:
|
---|
156 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
---|
157 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
---|
158 | 60 00 80 88 3c 8c 40 00 00:36:48.591 READ FPDMA QUEUED
|
---|
159 | 61 00 10 ff ff ff 4f 00 00:36:47.476 WRITE FPDMA QUEUED
|
---|
160 | 60 00 80 08 3c 8c 40 00 00:36:47.476 READ FPDMA QUEUED
|
---|
161 | 60 00 80 88 3b 8c 40 00 00:36:47.475 READ FPDMA QUEUED
|
---|
162 | 61 00 10 ff ff ff 4f 00 00:36:47.457 WRITE FPDMA QUEUED
|
---|
163 |
|
---|
164 | Error 245 occurred at disk power-on lifetime: 18283 hours (761 days + 19 hours)
|
---|
165 | When the command that caused the error occurred, the device was active or idle.
|
---|
166 |
|
---|
167 | After command completion occurred, registers were:
|
---|
168 | ER ST SC SN CL CH DH
|
---|
169 | -- -- -- -- -- -- --
|
---|
170 | 40 51 00 c3 69 81 00 Error: UNC at LBA = 0x008169c3 = 8481219
|
---|
171 |
|
---|
172 | Commands leading to the command that caused the error were:
|
---|
173 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
---|
174 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
---|
175 | 60 00 00 00 5d 81 40 00 01:37:11.409 READ FPDMA QUEUED
|
---|
176 | 60 00 00 00 56 81 40 00 01:37:11.026 READ FPDMA QUEUED
|
---|
177 | 60 00 00 00 4f 81 40 00 01:37:10.713 READ FPDMA QUEUED
|
---|
178 | 60 00 00 00 4e 81 40 00 01:37:10.713 READ FPDMA QUEUED
|
---|
179 | 60 00 00 00 4d 81 40 00 01:37:10.713 READ FPDMA QUEUED
|
---|
180 |
|
---|
181 | Error 244 occurred at disk power-on lifetime: 18282 hours (761 days + 18 hours)
|
---|
182 | When the command that caused the error occurred, the device was active or idle.
|
---|
183 |
|
---|
184 | After command completion occurred, registers were:
|
---|
185 | ER ST SC SN CL CH DH
|
---|
186 | -- -- -- -- -- -- --
|
---|
187 | 40 51 00 ae e8 1d 00 Error: UNC at LBA = 0x001de8ae = 1960110
|
---|
188 |
|
---|
189 | Commands leading to the command that caused the error were:
|
---|
190 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
---|
191 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
---|
192 | 60 00 00 00 df 15 40 00 00:34:52.481 READ FPDMA QUEUED
|
---|
193 | 60 00 00 00 de 15 40 00 00:34:52.481 READ FPDMA QUEUED
|
---|
194 | 60 00 00 00 dd 15 40 00 00:34:52.481 READ FPDMA QUEUED
|
---|
195 | 60 00 00 00 dc 15 40 00 00:34:52.480 READ FPDMA QUEUED
|
---|
196 | 60 00 00 00 db 15 40 00 00:34:52.480 READ FPDMA QUEUED
|
---|
197 |
|
---|
198 | --------------------------------------------------------------------------------
|
---|
199 |
|
---|
200 | SMART Self-test log structure revision number 1
|
---|
201 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
202 | # 1 Short offline Interrupted (host reset) 00% 18606 -
|
---|
203 | # 2 Short offline Completed: electrical failure 90% 18286 0
|
---|
204 | # 3 Short offline Completed: electrical failure 90% 18284 0
|
---|
205 | # 4 Short offline Completed: electrical failure 90% 18284 0
|
---|
206 | # 5 Short offline Completed: electrical failure 90% 18283 0
|
---|
207 |
|
---|
208 | SMART Selective self-test log data structure revision number 1
|
---|
209 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
210 | 1 0 0 Not_testing
|
---|
211 | 2 0 0 Not_testing
|
---|
212 | 3 0 0 Not_testing
|
---|
213 | 4 0 0 Not_testing
|
---|
214 | 5 0 0 Not_testing
|
---|
215 | Selective self-test flags (0x0):
|
---|
216 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
217 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
218 |
|
---|
219 | --------------------------------------------------------------------------------
|
---|
220 |
|
---|
221 | SMART Self-test log structure revision number 1
|
---|
222 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
223 | # 1 Short offline Completed: read failure 90% 18609 335888
|
---|
224 | # 2 Short offline Interrupted (host reset) 00% 18606 -
|
---|
225 | # 3 Short offline Completed: electrical failure 90% 18286 0
|
---|
226 | # 4 Short offline Completed: electrical failure 90% 18284 0
|
---|
227 | # 5 Short offline Completed: electrical failure 90% 18284 0
|
---|
228 | # 6 Short offline Completed: electrical failure 90% 18283 0
|
---|
229 |
|
---|
230 | SMART Selective self-test log data structure revision number 1
|
---|
231 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
232 | 1 0 0 Not_testing
|
---|
233 | 2 0 0 Not_testing
|
---|
234 | 3 0 0 Not_testing
|
---|
235 | 4 0 0 Not_testing
|
---|
236 | 5 0 0 Not_testing
|
---|
237 | Selective self-test flags (0x0):
|
---|
238 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
239 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|