Ticket #1563: da13_smartctl_7.3_-x

File da13_smartctl_7.3_-x, 11.4 KB (added by Endo, 2 years ago)
Line 
1smartctl 7.3 (build date Jan 23 2022) [FreeBSD 12.3-STABLE amd64] (local build)
2Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: SAMSUNG MZ7L33T8HBLT-00A07
6Serial Number: S6ERNE0RA01674
7LU WWN Device Id: 5 002538 f01a00776
8Firmware Version: JXTC104Q
9User Capacity: 3,840,755,982,336 bytes [3.84 TB]
10Sector Sizes: 512 bytes logical, 4096 bytes physical
11Rotation Rate: Solid State Device
12Form Factor: 2.5 inches
13TRIM Command: Available, deterministic, zeroed
14Device is: Not in smartctl database
15ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
16SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
17Local Time is: Sun Jan 23 01:45:33 2022 EET
18SMART support is: Available - device has SMART capability.
19SMART support is: Enabled
20AAM feature is: Unavailable
21APM feature is: Unavailable
22Rd look-ahead is: Enabled
23Write cache is: Enabled
24DSN feature is: Unavailable
25ATA Security is: Disabled, NOT FROZEN [SEC1]
26Wt Cache Reorder: Enabled
27
28=== START OF READ SMART DATA SECTION ===
29SMART overall-health self-assessment test result: PASSED
30
31General SMART Values:
32Offline data collection status: (0x00) Offline data collection activity
33 was never started.
34 Auto Offline Data Collection: Disabled.
35Self-test execution status: ( 0) The previous self-test routine completed
36 without error or no self-test has ever
37 been run.
38Total time to complete Offline
39data collection: ( 0) seconds.
40Offline data collection
41capabilities: (0x53) SMART execute Offline immediate.
42 Auto Offline data collection on/off support.
43 Suspend Offline collection upon new
44 command.
45 No Offline surface scan supported.
46 Self-test supported.
47 No Conveyance Self-test supported.
48 Selective Self-test supported.
49SMART capabilities: (0x0003) Saves SMART data before entering
50 power-saving mode.
51 Supports SMART auto save timer.
52Error logging capability: (0x01) Error logging supported.
53 General Purpose Logging supported.
54Short self-test routine
55recommended polling time: ( 2) minutes.
56Extended self-test routine
57recommended polling time: ( 200) minutes.
58SCT capabilities: (0x003d) SCT Status supported.
59 SCT Error Recovery Control supported.
60 SCT Feature Control supported.
61 SCT Data Table supported.
62
63SMART Attributes Data Structure revision number: 1
64Vendor Specific SMART Attributes with Thresholds:
65ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
66 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
67 9 Power_On_Hours -O--CK 099 099 000 - 34
68 12 Power_Cycle_Count -O--CK 099 099 000 - 4
69177 Wear_Leveling_Count PO--C- 100 100 005 - 0
70179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
71180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 3381
72181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
73182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
74183 Runtime_Bad_Block PO--C- 100 100 010 - 0
75184 End-to-End_Error PO--CK 100 100 097 - 0
76187 Reported_Uncorrect -O--CK 100 100 000 - 0
77190 Airflow_Temperature_Cel -O--CK 072 060 000 - 28
78194 Temperature_Celsius -O---K 072 060 000 - 28 (Min/Max 23/40)
79195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0
80197 Current_Pending_Sector -O--CK 100 100 000 - 0
81199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
82202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0
83235 Unknown_Attribute -O--C- 099 099 000 - 1
84241 Total_LBAs_Written -O--CK 099 099 000 - 3947466838
85242 Total_LBAs_Read -O--CK 099 099 000 - 1956288331
86243 Unknown_Attribute -O--CK 100 100 000 - 0
87244 Unknown_Attribute -O--CK 100 100 000 - 0
88245 Unknown_Attribute -O--CK 100 100 000 - 65535
89246 Unknown_Attribute -O--CK 100 100 000 - 65535
90247 Unknown_Attribute -O--CK 100 100 000 - 65535
91251 Unknown_Attribute -O--CK 100 100 000 - 3952479808
92 ||||||_ K auto-keep
93 |||||__ C event count
94 ||||___ R error rate
95 |||____ S speed/performance
96 ||_____ O updated online
97 |______ P prefailure warning
98
99General Purpose Log Directory Version 1
100SMART Log Directory Version 1 [multi-sector log support]
101Address Access R/W Size Description
1020x00 GPL,SL R/O 1 Log Directory
1030x01 SL R/O 1 Summary SMART error log
1040x02 SL R/O 1 Comprehensive SMART error log
1050x03 GPL R/O 1 Ext. Comprehensive SMART error log
1060x04 GPL,SL R/O 8 Device Statistics log
1070x06 SL R/O 1 SMART self-test log
1080x07 GPL R/O 1 Extended self-test log
1090x09 SL R/W 1 Selective self-test log
1100x10 GPL R/O 1 NCQ Command Error log
1110x11 GPL R/O 1 SATA Phy Event Counters log
1120x12 GPL R/O 1 SATA NCQ Non-Data log
1130x13 GPL R/O 1 SATA NCQ Send and Receive log
1140x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1150x80-0x9f GPL,SL R/W 16 Host vendor specific log
1160xa5 SL VS 16 Device vendor specific log
1170xce SL VS 16 Device vendor specific log
1180xe0 GPL,SL R/W 1 SCT Command/Status
1190xe1 GPL,SL R/W 1 SCT Data Transfer
120
121SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
122No Errors Logged
123
124SMART Extended Self-test Log Version: 1 (1 sectors)
125No self-tests have been logged. [To run self-tests, use: smartctl -t]
126
127SMART Selective self-test log data structure revision number 1
128 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
129 1 0 0 Not_testing
130 2 0 0 Not_testing
131 3 0 0 Not_testing
132 4 0 0 Not_testing
133 5 0 0 Not_testing
134 256 0 65535 Read_scanning was never started
135Selective self-test flags (0x0):
136 After scanning selected spans, do NOT read-scan remainder of disk.
137If Selective self-test is pending on power-up, resume after 0 minute delay.
138
139SCT Status Version: 3
140SCT Version (vendor specific): 256 (0x0100)
141Device State: Active (0)
142Current Temperature: 28 Celsius
143Power Cycle Min/Max Temperature: 24/40 Celsius
144Lifetime Min/Max Temperature: 23/40 Celsius
145Specified Max Operating Temperature: 70 Celsius
146Under/Over Temperature Limit Count: 0/0
147SMART Status: 0xc24f (PASSED)
148
149SCT Temperature History Version: 2
150Temperature Sampling Period: 10 minutes
151Temperature Logging Interval: 10 minutes
152Min/Max recommended Temperature: 0/70 Celsius
153Min/Max Temperature Limit: 0/70 Celsius
154Temperature History Size (Index): 128 (83)
155
156Index Estimated Time Temperature Celsius
157 84 2022-01-22 04:30 29 **********
158 ... ..( 43 skipped). .. **********
159 0 2022-01-22 11:50 29 **********
160 1 2022-01-22 12:00 28 *********
161 ... ..( 16 skipped). .. *********
162 18 2022-01-22 14:50 28 *********
163 19 2022-01-22 15:00 29 **********
164 20 2022-01-22 15:10 28 *********
165 ... ..( 9 skipped). .. *********
166 30 2022-01-22 16:50 28 *********
167 31 2022-01-22 17:00 29 **********
168 ... ..( 9 skipped). .. **********
169 41 2022-01-22 18:40 29 **********
170 42 2022-01-22 18:50 31 ************
171 43 2022-01-22 19:00 29 **********
172 44 2022-01-22 19:10 31 ************
173 45 2022-01-22 19:20 29 **********
174 46 2022-01-22 19:30 29 **********
175 47 2022-01-22 19:40 29 **********
176 48 2022-01-22 19:50 32 *************
177 49 2022-01-22 20:00 29 **********
178 50 2022-01-22 20:10 31 ************
179 51 2022-01-22 20:20 28 *********
180 52 2022-01-22 20:30 30 ***********
181 53 2022-01-22 20:40 29 **********
182 54 2022-01-22 20:50 29 **********
183 55 2022-01-22 21:00 29 **********
184 56 2022-01-22 21:10 28 *********
185 57 2022-01-22 21:20 29 **********
186 ... ..( 2 skipped). .. **********
187 60 2022-01-22 21:50 29 **********
188 61 2022-01-22 22:00 28 *********
189 ... ..( 21 skipped). .. *********
190 83 2022-01-23 01:40 28 *********
191
192SCT Error Recovery Control:
193 Read: Disabled
194 Write: Disabled
195
196Device Statistics (GP Log 0x04)
197Page Offset Size Value Flags Description
1980x01 ===== = = === == General Statistics (rev 1) ==
1990x01 0x008 4 4 --- Lifetime Power-On Resets
2000x01 0x010 4 34 --- Power-on Hours
2010x01 0x018 6 3947466838 --- Logical Sectors Written
2020x01 0x020 6 15544994 --- Number of Write Commands
2030x01 0x028 6 1956288331 --- Logical Sectors Read
2040x01 0x030 6 7881647 --- Number of Read Commands
2050x01 0x038 6 939000 --- Date and Time TimeStamp
2060x04 ===== = = === == General Errors Statistics (rev 1) ==
2070x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
2080x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
2090x05 ===== = = === == Temperature Statistics (rev 1) ==
2100x05 0x008 1 28 --- Current Temperature
2110x05 0x020 1 40 --- Highest Temperature
2120x05 0x028 1 23 --- Lowest Temperature
2130x05 0x058 1 70 --- Specified Maximum Operating Temperature
2140x06 ===== = = === == Transport Statistics (rev 1) ==
2150x06 0x008 4 9 --- Number of Hardware Resets
2160x06 0x010 4 0 --- Number of ASR Events
2170x06 0x018 4 0 --- Number of Interface CRC Errors
2180x07 ===== = = === == Solid State Device Statistics (rev 1) ==
2190x07 0x008 1 0 N-- Percentage Used Endurance Indicator
220 |||_ C monitored condition met
221 ||__ D supports DSN
222 |___ N normalized value
223
224Pending Defects log (GP Log 0x0c) not supported
225
226SATA Phy Event Counters (GP Log 0x11)
227ID Size Value Description
2280x0001 2 0 Command failed due to ICRC error
2290x0002 2 0 R_ERR response for data FIS
2300x0003 2 0 R_ERR response for device-to-host data FIS
2310x0004 2 0 R_ERR response for host-to-device data FIS
2320x0005 2 0 R_ERR response for non-data FIS
2330x0006 2 0 R_ERR response for device-to-host non-data FIS
2340x0007 2 0 R_ERR response for host-to-device non-data FIS
2350x0008 2 0 Device-to-host non-data FIS retries
2360x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
2370x000a 2 1 Device-to-host register FISes sent due to a COMRESET
2380x000b 2 0 CRC errors within host-to-device FIS
2390x000d 2 0 Non-CRC errors within host-to-device FIS
2400x000f 2 0 R_ERR response for host-to-device data FIS, CRC
2410x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
2420x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
2430x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
244