1 | [root@backup ~]# /usr/local/sbin/smartctl -F xerrorlba -x -a /dev/sdd
|
---|
2 | smartctl 7.2 2020-12-30 r5155 [x86_64-linux-3.10.0-1160.49.1.el7.x86_64] (local build)
|
---|
3 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
4 |
|
---|
5 | === START OF INFORMATION SECTION ===
|
---|
6 | Model Family: Western Digital Caviar Black
|
---|
7 | Device Model: WDC WD6401AALS-00L3B2
|
---|
8 | Serial Number: WD-WCASY5462030
|
---|
9 | LU WWN Device Id: 5 0014ee 2ad88b13f
|
---|
10 | Firmware Version: 01.03B01
|
---|
11 | User Capacity: 640,135,028,736 bytes [640 GB]
|
---|
12 | Sector Size: 512 bytes logical/physical
|
---|
13 | Device is: In smartctl database [for details use: -P show]
|
---|
14 | ATA Version is: ATA8-ACS (minor revision not indicated)
|
---|
15 | SATA Version is: SATA 2.5, 3.0 Gb/s
|
---|
16 | Local Time is: Tue Jan 11 20:51:13 2022 +07
|
---|
17 | SMART support is: Available - device has SMART capability.
|
---|
18 | SMART support is: Enabled
|
---|
19 | AAM level is: 254 (maximum performance), recommended: 128
|
---|
20 | APM feature is: Unavailable
|
---|
21 | Rd look-ahead is: Enabled
|
---|
22 | Write cache is: Enabled
|
---|
23 | DSN feature is: Unavailable
|
---|
24 | ATA Security is: Disabled, frozen [SEC2]
|
---|
25 | Wt Cache Reorder: Enabled
|
---|
26 |
|
---|
27 | === START OF READ SMART DATA SECTION ===
|
---|
28 | SMART overall-health self-assessment test result: PASSED
|
---|
29 |
|
---|
30 | General SMART Values:
|
---|
31 | Offline data collection status: (0x84) Offline data collection activity
|
---|
32 | was suspended by an interrupting command from host.
|
---|
33 | Auto Offline Data Collection: Enabled.
|
---|
34 | Self-test execution status: ( 121) The previous self-test completed having
|
---|
35 | the read element of the test failed.
|
---|
36 | Total time to complete Offline
|
---|
37 | data collection: (12000) seconds.
|
---|
38 | Offline data collection
|
---|
39 | capabilities: (0x7b) SMART execute Offline immediate.
|
---|
40 | Auto Offline data collection on/off support.
|
---|
41 | Suspend Offline collection upon new
|
---|
42 | command.
|
---|
43 | Offline surface scan supported.
|
---|
44 | Self-test supported.
|
---|
45 | Conveyance Self-test supported.
|
---|
46 | Selective Self-test supported.
|
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
48 | power-saving mode.
|
---|
49 | Supports SMART auto save timer.
|
---|
50 | Error logging capability: (0x01) Error logging supported.
|
---|
51 | General Purpose Logging supported.
|
---|
52 | Short self-test routine
|
---|
53 | recommended polling time: ( 2) minutes.
|
---|
54 | Extended self-test routine
|
---|
55 | recommended polling time: ( 140) minutes.
|
---|
56 | Conveyance self-test routine
|
---|
57 | recommended polling time: ( 5) minutes.
|
---|
58 | SCT capabilities: (0x303f) SCT Status supported.
|
---|
59 | SCT Error Recovery Control supported.
|
---|
60 | SCT Feature Control supported.
|
---|
61 | SCT Data Table supported.
|
---|
62 |
|
---|
63 | SMART Attributes Data Structure revision number: 16
|
---|
64 | Vendor Specific SMART Attributes with Thresholds:
|
---|
65 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
66 | 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
|
---|
67 | 3 Spin_Up_Time POS--K 160 160 021 - 4958
|
---|
68 | 4 Start_Stop_Count -O--CK 099 099 000 - 1525
|
---|
69 | 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
|
---|
70 | 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
|
---|
71 | 9 Power_On_Hours -O--CK 001 001 000 - 99098
|
---|
72 | 10 Spin_Retry_Count -O--CK 100 100 000 - 0
|
---|
73 | 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
|
---|
74 | 12 Power_Cycle_Count -O--CK 099 099 000 - 1523
|
---|
75 | 192 Power-Off_Retract_Count -O--CK 200 200 000 - 157
|
---|
76 | 193 Load_Cycle_Count -O--CK 200 200 000 - 1525
|
---|
77 | 194 Temperature_Celsius -O---K 111 099 000 - 36
|
---|
78 | 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
|
---|
79 | 197 Current_Pending_Sector -O--CK 200 200 000 - 3
|
---|
80 | 198 Offline_Uncorrectable ----CK 200 200 000 - 0
|
---|
81 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
---|
82 | 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
|
---|
83 | ||||||_ K auto-keep
|
---|
84 | |||||__ C event count
|
---|
85 | ||||___ R error rate
|
---|
86 | |||____ S speed/performance
|
---|
87 | ||_____ O updated online
|
---|
88 | |______ P prefailure warning
|
---|
89 |
|
---|
90 | General Purpose Log Directory Version 1
|
---|
91 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
92 | Address Access R/W Size Description
|
---|
93 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
94 | 0x01 SL R/O 1 Summary SMART error log
|
---|
95 | 0x02 SL R/O 5 Comprehensive SMART error log
|
---|
96 | 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
|
---|
97 | 0x06 SL R/O 1 SMART self-test log
|
---|
98 | 0x07 GPL R/O 1 Extended self-test log
|
---|
99 | 0x09 SL R/W 1 Selective self-test log
|
---|
100 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
101 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
102 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
103 | 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
|
---|
104 | 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
|
---|
105 | 0xc0 GPL,SL VS 1 Device vendor specific log
|
---|
106 | 0xc1 GPL VS 24 Device vendor specific log
|
---|
107 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
108 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
109 |
|
---|
110 | SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
|
---|
111 | Device Error Count: 89 (device log contains only the most recent 24 errors)
|
---|
112 | CR = Command Register
|
---|
113 | FEATR = Features Register
|
---|
114 | COUNT = Count (was: Sector Count) Register
|
---|
115 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
---|
116 | LH = LBA High (was: Cylinder High) Register ] LBA
|
---|
117 | LM = LBA Mid (was: Cylinder Low) Register ] Register
|
---|
118 | LL = LBA Low (was: Sector Number) Register ]
|
---|
119 | DV = Device (was: Device/Head) Register
|
---|
120 | DC = Device Control Register
|
---|
121 | ER = Error register
|
---|
122 | ST = Status register
|
---|
123 | Powered_Up_Time is measured from power on, and printed as
|
---|
124 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
---|
125 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
---|
126 |
|
---|
127 | Error 89 [16] occurred at disk power-on lifetime: 33550 hours (1397 days + 22 hours)
|
---|
128 | When the command that caused the error occurred, the device was active or idle.
|
---|
129 |
|
---|
130 | After command completion occurred, registers were:
|
---|
131 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
132 | -- -- -- == -- == == == -- -- -- -- --
|
---|
133 | 40 -- 51 00 00 00 00 2d cd ab 30 40 00 Error: UNC at LBA = 0x2dcdab30 = 768453424
|
---|
134 |
|
---|
135 | Commands leading to the command that caused the error were:
|
---|
136 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
137 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
138 | 60 00 08 00 40 00 cd 00 ab 2d 30 40 08 15d+12:24:30.054 READ FPDMA QUEUED
|
---|
139 | 61 00 08 00 38 00 cb 00 94 2d 78 40 08 15d+12:24:26.015 WRITE FPDMA QUEUED
|
---|
140 | 61 00 08 00 30 00 c7 00 85 2d e0 40 08 15d+12:24:26.014 WRITE FPDMA QUEUED
|
---|
141 | 61 00 08 00 28 00 c7 00 84 2d 10 40 08 15d+12:24:26.014 WRITE FPDMA QUEUED
|
---|
142 | 61 00 08 00 20 00 c7 00 70 2d 08 40 08 15d+12:24:26.014 WRITE FPDMA QUEUED
|
---|
143 |
|
---|
144 | Error 88 [15] occurred at disk power-on lifetime: 33550 hours (1397 days + 22 hours)
|
---|
145 | When the command that caused the error occurred, the device was active or idle.
|
---|
146 |
|
---|
147 | After command completion occurred, registers were:
|
---|
148 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
149 | -- -- -- == -- == == == -- -- -- -- --
|
---|
150 | 40 -- 51 00 00 00 00 2d cd ab 30 40 00 Error: UNC at LBA = 0x2dcdab30 = 768453424
|
---|
151 |
|
---|
152 | Commands leading to the command that caused the error were:
|
---|
153 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
154 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
155 | 60 00 08 00 f0 00 cd 00 ab 2d 30 40 08 15d+12:23:38.812 READ FPDMA QUEUED
|
---|
156 | ea 00 00 00 00 00 00 00 00 00 00 e0 08 15d+12:23:30.224 FLUSH CACHE EXT
|
---|
157 | 61 00 08 00 e0 00 0c 00 10 2e 40 40 08 15d+12:23:30.223 WRITE FPDMA QUEUED
|
---|
158 | ea 00 00 00 00 00 00 00 00 00 00 e0 08 15d+12:23:30.199 FLUSH CACHE EXT
|
---|
159 | 61 00 20 00 d0 00 0c 00 10 2e 20 40 08 15d+12:23:30.199 WRITE FPDMA QUEUED
|
---|
160 |
|
---|
161 | Error 87 [14] occurred at disk power-on lifetime: 33550 hours (1397 days + 22 hours)
|
---|
162 | When the command that caused the error occurred, the device was active or idle.
|
---|
163 |
|
---|
164 | After command completion occurred, registers were:
|
---|
165 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
166 | -- -- -- == -- == == == -- -- -- -- --
|
---|
167 | 40 -- 51 00 00 00 00 2d cd ab 30 40 00 Error: UNC at LBA = 0x2dcdab30 = 768453424
|
---|
168 |
|
---|
169 | Commands leading to the command that caused the error were:
|
---|
170 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
171 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
172 | 60 00 08 00 50 00 ab 00 7b 30 20 40 08 15d+12:14:41.998 READ FPDMA QUEUED
|
---|
173 | 60 00 08 00 48 00 ab 00 bb 2f 68 40 08 15d+12:14:41.990 READ FPDMA QUEUED
|
---|
174 | 60 01 00 00 40 00 54 00 38 2e 20 40 08 15d+12:14:41.990 READ FPDMA QUEUED
|
---|
175 | 60 00 08 00 38 00 cd 00 ab 2d 30 40 08 15d+12:14:41.990 READ FPDMA QUEUED
|
---|
176 | ea 00 00 00 00 00 00 00 00 00 00 e0 08 15d+12:14:41.966 FLUSH CACHE EXT
|
---|
177 |
|
---|
178 | Error 86 [13] occurred at disk power-on lifetime: 33550 hours (1397 days + 22 hours)
|
---|
179 | When the command that caused the error occurred, the device was active or idle.
|
---|
180 |
|
---|
181 | After command completion occurred, registers were:
|
---|
182 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
183 | -- -- -- == -- == == == -- -- -- -- --
|
---|
184 | 40 -- 51 00 00 00 00 2d cd ab 30 40 00 Error: WP at LBA = 0x2dcdab30 = 768453424
|
---|
185 |
|
---|
186 | Commands leading to the command that caused the error were:
|
---|
187 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
188 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
189 | 61 00 08 00 30 00 0c 00 0b 2e 68 40 08 15d+12:14:39.554 WRITE FPDMA QUEUED
|
---|
190 | 61 00 08 00 28 00 1d 00 55 2e a0 40 08 15d+12:14:39.554 WRITE FPDMA QUEUED
|
---|
191 | 60 00 08 00 20 00 ab 00 95 2f 30 40 08 15d+12:14:39.554 READ FPDMA QUEUED
|
---|
192 | 60 00 18 00 18 00 54 00 63 2e 00 40 08 15d+12:14:39.553 READ FPDMA QUEUED
|
---|
193 | 60 00 18 00 10 00 54 00 62 2e e0 40 08 15d+12:14:39.553 READ FPDMA QUEUED
|
---|
194 |
|
---|
195 | Error 85 [12] occurred at disk power-on lifetime: 33550 hours (1397 days + 22 hours)
|
---|
196 | When the command that caused the error occurred, the device was active or idle.
|
---|
197 |
|
---|
198 | After command completion occurred, registers were:
|
---|
199 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
200 | -- -- -- == -- == == == -- -- -- -- --
|
---|
201 | 40 -- 51 00 00 00 00 2d cd ab 30 40 00 Error: UNC at LBA = 0x2dcdab30 = 768453424
|
---|
202 |
|
---|
203 | Commands leading to the command that caused the error were:
|
---|
204 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
205 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
206 | 60 00 08 00 88 00 cd 00 ab 2d 30 40 08 15d+12:14:37.114 READ FPDMA QUEUED
|
---|
207 | 61 00 38 00 80 00 0c 00 0b 2e 30 40 08 15d+12:14:37.114 WRITE FPDMA QUEUED
|
---|
208 | 60 00 88 00 78 00 e5 00 21 2d e8 40 08 15d+12:14:37.114 READ FPDMA QUEUED
|
---|
209 | 60 00 10 00 70 00 e5 00 21 2d d0 40 08 15d+12:14:37.114 READ FPDMA QUEUED
|
---|
210 | 60 00 08 00 68 00 e5 00 21 2d c0 40 08 15d+12:14:37.114 READ FPDMA QUEUED
|
---|
211 |
|
---|
212 | Error 84 [11] occurred at disk power-on lifetime: 33550 hours (1397 days + 22 hours)
|
---|
213 | When the command that caused the error occurred, the device was active or idle.
|
---|
214 |
|
---|
215 | After command completion occurred, registers were:
|
---|
216 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
217 | -- -- -- == -- == == == -- -- -- -- --
|
---|
218 | 40 -- 51 00 00 00 00 2d cd ab 30 40 00 Error: WP at LBA = 0x2dcdab30 = 768453424
|
---|
219 |
|
---|
220 | Commands leading to the command that caused the error were:
|
---|
221 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
222 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
223 | 61 00 08 00 e0 00 0c 00 0b 2e 28 40 08 15d+12:14:34.708 WRITE FPDMA QUEUED
|
---|
224 | 61 00 08 00 d8 00 68 00 71 30 10 40 08 15d+12:14:34.708 WRITE FPDMA QUEUED
|
---|
225 | 61 00 08 00 d0 00 67 00 71 30 00 40 08 15d+12:14:34.707 WRITE FPDMA QUEUED
|
---|
226 | 61 00 08 00 c8 00 67 00 70 30 80 40 08 15d+12:14:34.707 WRITE FPDMA QUEUED
|
---|
227 | 60 00 08 00 c0 00 cd 00 ab 2d 30 40 08 15d+12:14:34.707 READ FPDMA QUEUED
|
---|
228 |
|
---|
229 | Error 83 [10] occurred at disk power-on lifetime: 33550 hours (1397 days + 22 hours)
|
---|
230 | When the command that caused the error occurred, the device was active or idle.
|
---|
231 |
|
---|
232 | After command completion occurred, registers were:
|
---|
233 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
234 | -- -- -- == -- == == == -- -- -- -- --
|
---|
235 | 40 -- 51 00 00 00 00 2d cd ab 30 40 00 Error: WP at LBA = 0x2dcdab30 = 768453424
|
---|
236 |
|
---|
237 | Commands leading to the command that caused the error were:
|
---|
238 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
239 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
240 | 61 00 08 00 d0 00 cb 00 98 2d f8 40 08 15d+12:14:32.268 WRITE FPDMA QUEUED
|
---|
241 | 61 00 08 00 c8 00 2b 00 ab 30 70 40 08 15d+12:14:32.267 WRITE FPDMA QUEUED
|
---|
242 | 61 00 08 00 c0 00 17 00 f0 2e 28 40 08 15d+12:14:32.267 WRITE FPDMA QUEUED
|
---|
243 | 61 00 60 00 b8 00 0c 00 0a 2e c8 40 08 15d+12:14:32.267 WRITE FPDMA QUEUED
|
---|
244 | 61 00 08 00 b0 00 d3 00 90 2d 00 40 08 15d+12:14:32.267 WRITE FPDMA QUEUED
|
---|
245 |
|
---|
246 | Error 82 [9] occurred at disk power-on lifetime: 33549 hours (1397 days + 21 hours)
|
---|
247 | When the command that caused the error occurred, the device was active or idle.
|
---|
248 |
|
---|
249 | After command completion occurred, registers were:
|
---|
250 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
251 | -- -- -- == -- == == == -- -- -- -- --
|
---|
252 | 40 -- 51 00 00 00 00 2d cd ab 30 40 00 Error: WP at LBA = 0x2dcdab30 = 768453424
|
---|
253 |
|
---|
254 | Commands leading to the command that caused the error were:
|
---|
255 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
256 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
257 | 61 00 08 00 08 00 54 00 5d 2e e0 40 08 15d+12:14:29.786 WRITE FPDMA QUEUED
|
---|
258 | 61 00 08 00 b8 00 54 00 5c 2e b8 40 08 15d+12:14:29.786 WRITE FPDMA QUEUED
|
---|
259 | 61 00 10 00 b0 00 4f 00 8e 2e 78 40 08 15d+12:14:29.786 WRITE FPDMA QUEUED
|
---|
260 | 61 00 08 00 a8 00 4f 00 8c 2e 80 40 08 15d+12:14:29.786 WRITE FPDMA QUEUED
|
---|
261 | 61 00 10 00 a0 00 4f 00 8b 2e d0 40 08 15d+12:14:29.786 WRITE FPDMA QUEUED
|
---|
262 |
|
---|
263 | SMART Error Log Version: 1
|
---|
264 | No Errors Logged
|
---|
265 |
|
---|
266 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
267 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
268 | # 1 Extended offline Completed: read failure 90% 33546 768453424
|
---|
269 | # 2 Short offline Completed without error 00% 8065 -
|
---|
270 | # 3 Short offline Completed without error 00% 8041 -
|
---|
271 | # 4 Short offline Completed without error 00% 8017 -
|
---|
272 | # 5 Short offline Completed without error 00% 7993 -
|
---|
273 | # 6 Short offline Completed without error 00% 7969 -
|
---|
274 | # 7 Extended offline Completed without error 00% 7948 -
|
---|
275 | # 8 Short offline Completed without error 00% 7945 -
|
---|
276 | # 9 Short offline Completed without error 00% 7921 -
|
---|
277 | #10 Short offline Completed without error 00% 7897 -
|
---|
278 | #11 Short offline Completed without error 00% 7873 -
|
---|
279 | #12 Short offline Completed without error 00% 7849 -
|
---|
280 | #13 Short offline Completed without error 00% 7825 -
|
---|
281 | #14 Short offline Completed without error 00% 7801 -
|
---|
282 | #15 Extended offline Completed without error 00% 7780 -
|
---|
283 | #16 Short offline Completed without error 00% 7777 -
|
---|
284 | #17 Short offline Completed without error 00% 7754 -
|
---|
285 | #18 Short offline Completed without error 00% 7730 -
|
---|
286 |
|
---|
287 | SMART Self-test log structure revision number 1
|
---|
288 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
289 | # 1 Extended offline Completed: read failure 90% 33546 768453424
|
---|
290 | # 2 Short offline Completed without error 00% 8065 -
|
---|
291 | # 3 Short offline Completed without error 00% 8041 -
|
---|
292 | # 4 Short offline Completed without error 00% 8017 -
|
---|
293 | # 5 Short offline Completed without error 00% 7993 -
|
---|
294 | # 6 Short offline Completed without error 00% 7969 -
|
---|
295 | # 7 Extended offline Completed without error 00% 7948 -
|
---|
296 | # 8 Short offline Completed without error 00% 7945 -
|
---|
297 | # 9 Short offline Completed without error 00% 7921 -
|
---|
298 | #10 Short offline Completed without error 00% 7897 -
|
---|
299 | #11 Short offline Completed without error 00% 7873 -
|
---|
300 | #12 Short offline Completed without error 00% 7849 -
|
---|
301 | #13 Short offline Completed without error 00% 7825 -
|
---|
302 | #14 Short offline Completed without error 00% 7801 -
|
---|
303 | #15 Extended offline Completed without error 00% 7780 -
|
---|
304 | #16 Short offline Completed without error 00% 7777 -
|
---|
305 | #17 Short offline Completed without error 00% 7754 -
|
---|
306 | #18 Short offline Completed without error 00% 7730 -
|
---|
307 | #19 Short offline Completed without error 00% 7706 -
|
---|
308 | #20 Short offline Completed without error 00% 7682 -
|
---|
309 | #21 Short offline Completed without error 00% 7658 -
|
---|
310 |
|
---|
311 | SMART Selective self-test log data structure revision number 1
|
---|
312 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
313 | 1 0 0 Not_testing
|
---|
314 | 2 0 0 Not_testing
|
---|
315 | 3 0 0 Not_testing
|
---|
316 | 4 0 0 Not_testing
|
---|
317 | 5 0 0 Not_testing
|
---|
318 | Selective self-test flags (0x0):
|
---|
319 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
320 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
321 |
|
---|
322 | SCT Status Version: 2
|
---|
323 | SCT Version (vendor specific): 258 (0x0102)
|
---|
324 | Device State: SMART Off-line Data Collection executing in background (4)
|
---|
325 | Current Temperature: 36 Celsius
|
---|
326 | Power Cycle Min/Max Temperature: 34/37 Celsius
|
---|
327 | Lifetime Min/Max Temperature: 36/48 Celsius
|
---|
328 | Under/Over Temperature Limit Count: 0/0
|
---|
329 |
|
---|
330 | SCT Temperature History Version: 2
|
---|
331 | Temperature Sampling Period: 1 minute
|
---|
332 | Temperature Logging Interval: 1 minute
|
---|
333 | Min/Max recommended Temperature: 0/60 Celsius
|
---|
334 | Min/Max Temperature Limit: -41/85 Celsius
|
---|
335 | Temperature History Size (Index): 128 (7)
|
---|
336 |
|
---|
337 | Index Estimated Time Temperature Celsius
|
---|
338 | 8 2022-01-11 18:44 36 *****************
|
---|
339 | ... ..(126 skipped). .. *****************
|
---|
340 | 7 2022-01-11 20:51 36 *****************
|
---|
341 |
|
---|
342 | SCT Error Recovery Control:
|
---|
343 | Read: Disabled
|
---|
344 | Write: Disabled
|
---|
345 |
|
---|
346 | Device Statistics (GP/SMART Log 0x04) not supported
|
---|
347 |
|
---|
348 | Pending Defects log (GP Log 0x0c) not supported
|
---|
349 |
|
---|
350 | SATA Phy Event Counters (GP Log 0x11)
|
---|
351 | ID Size Value Description
|
---|
352 | 0x0001 2 0 Command failed due to ICRC error
|
---|
353 | 0x0002 2 0 R_ERR response for data FIS
|
---|
354 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
355 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
356 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
357 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
358 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
359 | 0x000a 2 219 Device-to-host register FISes sent due to a COMRESET
|
---|
360 | 0x8000 4 5679195 Vendor specific
|
---|
361 |
|
---|
362 |
|
---|