Ticket #155: Hitachi_HDS721010CLA332_smartctl_-x.log

File Hitachi_HDS721010CLA332_smartctl_-x.log, 10.0 KB (added by panticz4, 11 years ago)
Line 
1smartctl 5.41 2011-03-09 r3293 [x86_64-unknown-linux-gnu-2.6.35-24-server] (local build)
2Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
3
4=== START OF INFORMATION SECTION ===
5Model Family:     Hitachi Deskstar 7K1000.C
6Device Model:     Hitachi HDS721010CLA332
7Serial Number:    XXXXXXXXXXXXXX
8Firmware Version: JP4OA3MA
9User Capacity:    1,000,204,886,016 bytes
10Device is:        In smartctl database [for details use: -P show]
11ATA Version is:   8
12ATA Standard is:  ATA-8-ACS revision 4
13Local Time is:    Tue Mar 15 10:05:04 2011 CET
14SMART support is: Available - device has SMART capability.
15SMART support is: Enabled
16
17=== START OF READ SMART DATA SECTION ===
18Error SMART Status command failed
19Please get assistance from http://smartmontools.sourceforge.net/
20Register values returned from SMART Status command are:
21 ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=....
22SMART overall-health self-assessment test result: PASSED
23Warning: This result is based on an Attribute check.
24
25General SMART Values:
26Offline data collection status:  (0x84) Offline data collection activity
27                                        was suspended by an interrupting command from host.
28                                        Auto Offline Data Collection: Enabled.
29Self-test execution status:      (   0) The previous self-test routine completed
30                                        without error or no self-test has ever
31                                        been run.
32Total time to complete Offline
33data collection:                ( 9929) seconds.
34Offline data collection
35capabilities:                    (0x5b) SMART execute Offline immediate.
36                                        Auto Offline data collection on/off support.
37                                        Suspend Offline collection upon new
38                                        command.
39                                        Offline surface scan supported.
40                                        Self-test supported.
41                                        No Conveyance Self-test supported.
42                                        Selective Self-test supported.
43SMART capabilities:            (0x0003) Saves SMART data before entering
44                                        power-saving mode.
45                                        Supports SMART auto save timer.
46Error logging capability:        (0x01) Error logging supported.
47                                        General Purpose Logging supported.
48Short self-test routine
49recommended polling time:        (   1) minutes.
50Extended self-test routine
51recommended polling time:        ( 166) minutes.
52SCT capabilities:              (0x003d) SCT Status supported.
53                                        SCT Error Recovery Control supported.
54                                        SCT Feature Control supported.
55                                        SCT Data Table supported.
56
57SMART Attributes Data Structure revision number: 16
58Vendor Specific SMART Attributes with Thresholds:
59ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
60  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
61  2 Throughput_Performance  0x0005   134   134   054    Pre-fail  Offline      -       100
62  3 Spin_Up_Time            0x0007   121   121   024    Pre-fail  Always       -       315 (Average 310)
63  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       16
64  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
65  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
66  8 Seek_Time_Performance   0x0005   138   138   020    Pre-fail  Offline      -       31
67  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       92
68 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
69 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       16
70192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       19
71193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       19
72194 Temperature_Celsius     0x0002   230   230   000    Old_age   Always       -       26 (Min/Max 18/35)
73196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
74197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
75198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
76199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
77
78General Purpose Log Directory Version 1
79SMART           Log Directory Version 1 [multi-sector log support]
80GP/S  Log at address 0x00 has    1 sectors [Log Directory]
81SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
82GP    Log at address 0x03 has    1 sectors [Ext. Comprehensive SMART error log]
83GP    Log at address 0x04 has    7 sectors [Device Statistics]
84SMART Log at address 0x06 has    1 sectors [SMART self-test log]
85GP    Log at address 0x07 has    1 sectors [Extended self-test log]
86SMART Log at address 0x09 has    1 sectors [Selective self-test log]
87GP    Log at address 0x10 has    1 sectors [NCQ Command Error]
88GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
89GP    Log at address 0x20 has    1 sectors [Streaming performance log]
90GP    Log at address 0x21 has    1 sectors [Write stream error log]
91GP    Log at address 0x22 has    1 sectors [Read stream error log]
92GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
93GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
94GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
95GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
96GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
97GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
98GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
99GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
100GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
101GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
102GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
103GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
104GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
105GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
106GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
107GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
108GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
109GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
110GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
111GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
112GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
113GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
114GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
115GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
116GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
117GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
118GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
119GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
120GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
121GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
122GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
123GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]
124GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
125GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]
126
127SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
128No Errors Logged
129
130SMART Extended Self-test Log Version: 1 (1 sectors)
131No self-tests have been logged.  [To run self-tests, use: smartctl -t]
132
133SMART Selective self-test log data structure revision number 1
134 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
135    1        0        0  Not_testing
136    2        0        0  Not_testing
137    3        0        0  Not_testing
138    4        0        0  Not_testing
139    5        0        0  Not_testing
140Selective self-test flags (0x0):
141  After scanning selected spans, do NOT read-scan remainder of disk.
142If Selective self-test is pending on power-up, resume after 0 minute delay.
143
144SCT Status Version:                  3
145SCT Version (vendor specific):       256 (0x0100)
146SCT Support Level:                   1
147Device State:                        SMART Off-line Data Collection executing in background (4)
148Current Temperature:                    26 Celsius
149Power Cycle Min/Max Temperature:     26/29 Celsius
150Lifetime    Min/Max Temperature:     18/35 Celsius
151Under/Over Temperature Limit Count:   0/0
152SCT Temperature History Version:     2
153Temperature Sampling Period:         1 minute
154Temperature Logging Interval:        1 minute
155Min/Max recommended Temperature:      0/60 Celsius
156Min/Max Temperature Limit:           -40/70 Celsius
157Temperature History Size (Index):    128 (66)
158
159Index    Estimated Time   Temperature Celsius
160  67    2011-03-15 07:58    27  ********
161 ...    ..(  7 skipped).    ..  ********
162  75    2011-03-15 08:06    27  ********
163  76    2011-03-15 08:07    28  *********
164 ...    ..( 73 skipped).    ..  *********
165  22    2011-03-15 09:21    28  *********
166  23    2011-03-15 09:22    29  **********
167  24    2011-03-15 09:23    28  *********
168  25    2011-03-15 09:24    28  *********
169  26    2011-03-15 09:25    28  *********
170  27    2011-03-15 09:26    29  **********
171 ...    ..( 17 skipped).    ..  **********
172  45    2011-03-15 09:44    29  **********
173  46    2011-03-15 09:45    28  *********
174 ...    ..( 10 skipped).    ..  *********
175  57    2011-03-15 09:56    28  *********
176  58    2011-03-15 09:57    27  ********
177 ...    ..(  6 skipped).    ..  ********
178  65    2011-03-15 10:04    27  ********
179  66    2011-03-15 10:05    26  *******
180
181Error SMART WRITE LOG does not return COUNT and LBA_LOW register
182Warning: device does not support SCT (Get) Error Recovery Control command
183
184SATA Phy Event Counters (GP Log 0x11)
185ID      Size     Value  Description
1860x0001  2            0  Command failed due to ICRC error
1870x0002  2            0  R_ERR response for data FIS
1880x0005  2            0  R_ERR response for non-data FIS
1890x0009  2            1  Transition from drive PhyRdy to drive PhyNRdy
1900x000a  2            1  Device-to-host register FISes sent due to a COMRESET
1910x000b  2            0  CRC errors within host-to-device FIS
1920x000d  2            0  Non-CRC errors within host-to-device FIS
193