1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-142-generic] (local build) |
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: WDC WUH722020ALN604 |
---|
6 | Serial Number: 2LG19YNM |
---|
7 | LU WWN Device Id: 5 000cca 2b3c099bf |
---|
8 | Firmware Version: PQGNW108 |
---|
9 | User Capacity: 20,000,588,955,648 bytes [20.0 TB] |
---|
10 | Sector Size: 4096 bytes logical/physical |
---|
11 | Rotation Rate: 7200 rpm |
---|
12 | Form Factor: 3.5 inches |
---|
13 | Device is: Not in smartctl database [for details use: -P showall] |
---|
14 | ATA Version is: Unknown(0x1ffc) (minor revision not indicated) |
---|
15 | SATA Version is: SATA >3.2 (0x7ff), 6.0 Gb/s (current: 6.0 Gb/s) |
---|
16 | Local Time is: Mon Nov 15 15:15:33 2021 CST |
---|
17 | SMART support is: Available - device has SMART capability. |
---|
18 | SMART support is: Enabled |
---|
19 | AAM feature is: Unavailable |
---|
20 | APM feature is: Disabled |
---|
21 | Rd look-ahead is: Enabled |
---|
22 | Write cache is: Enabled |
---|
23 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
24 | Wt Cache Reorder: Enabled |
---|
25 | |
---|
26 | === START OF READ SMART DATA SECTION === |
---|
27 | SMART overall-health self-assessment test result: PASSED |
---|
28 | |
---|
29 | General SMART Values: |
---|
30 | Offline data collection status: (0x80) Offline data collection activity |
---|
31 | was never started. |
---|
32 | Auto Offline Data Collection: Enabled. |
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
34 | without error or no self-test has ever |
---|
35 | been run. |
---|
36 | Total time to complete Offline |
---|
37 | data collection: ( 101) seconds. |
---|
38 | Offline data collection |
---|
39 | capabilities: (0x5b) SMART execute Offline immediate. |
---|
40 | Auto Offline data collection on/off support. |
---|
41 | Suspend Offline collection upon new |
---|
42 | command. |
---|
43 | Offline surface scan supported. |
---|
44 | Self-test supported. |
---|
45 | No Conveyance Self-test supported. |
---|
46 | Selective Self-test supported. |
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
48 | power-saving mode. |
---|
49 | Supports SMART auto save timer. |
---|
50 | Error logging capability: (0x01) Error logging supported. |
---|
51 | General Purpose Logging supported. |
---|
52 | Short self-test routine |
---|
53 | recommended polling time: ( 2) minutes. |
---|
54 | Extended self-test routine |
---|
55 | recommended polling time: (2171) minutes. |
---|
56 | SCT capabilities: (0x003d) SCT Status supported. |
---|
57 | SCT Error Recovery Control supported. |
---|
58 | SCT Feature Control supported. |
---|
59 | SCT Data Table supported. |
---|
60 | |
---|
61 | SMART Attributes Data Structure revision number: 16 |
---|
62 | Vendor Specific SMART Attributes with Thresholds: |
---|
63 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
64 | 1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0 |
---|
65 | 2 Throughput_Performance P-S--- 148 148 054 - 47 |
---|
66 | 3 Spin_Up_Time POS--- 098 098 001 - 144 |
---|
67 | 4 Start_Stop_Count -O--C- 100 100 000 - 2 |
---|
68 | 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 |
---|
69 | 7 Seek_Error_Rate PO-R-- 100 100 001 - 0 |
---|
70 | 8 Seek_Time_Performance P-S--- 140 140 020 - 15 |
---|
71 | 9 Power_On_Hours -O--C- 100 100 000 - 1133 |
---|
72 | 10 Spin_Retry_Count PO--C- 100 100 001 - 0 |
---|
73 | 12 Power_Cycle_Count -O--CK 100 100 000 - 2 |
---|
74 | 22 Unknown_Attribute PO---K 100 100 025 - 6553700 |
---|
75 | 90 Unknown_Attribute P---CK 100 100 001 - 304942678016 |
---|
76 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 54 |
---|
77 | 193 Load_Cycle_Count -O--C- 100 100 000 - 54 |
---|
78 | 194 Temperature_Celsius -O---- 057 057 000 - 38 (Min/Max 22/41) |
---|
79 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 |
---|
80 | 197 Current_Pending_Sector -O---K 100 100 000 - 0 |
---|
81 | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 |
---|
82 | 199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0 |
---|
83 | ||||||_ K auto-keep |
---|
84 | |||||__ C event count |
---|
85 | ||||___ R error rate |
---|
86 | |||____ S speed/performance |
---|
87 | ||_____ O updated online |
---|
88 | |______ P prefailure warning |
---|
89 | |
---|
90 | General Purpose Log Directory Version 1 |
---|
91 | SMART Log Directory Version 1 [multi-sector log support] |
---|
92 | Address Access R/W Size Description |
---|
93 | 0x00 GPL,SL R/O 1 Log Directory |
---|
94 | 0x01 SL R/O 1 Summary SMART error log |
---|
95 | 0x02 SL R/O 1 Comprehensive SMART error log |
---|
96 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log |
---|
97 | 0x04 GPL R/O 256 Device Statistics log |
---|
98 | 0x04 SL R/O 255 Device Statistics log |
---|
99 | 0x06 SL R/O 1 SMART self-test log |
---|
100 | 0x07 GPL R/O 1 Extended self-test log |
---|
101 | 0x08 GPL R/O 2 Power Conditions log |
---|
102 | 0x09 SL R/W 1 Selective self-test log |
---|
103 | 0x0c GPL R/O 2198 Pending Defects log |
---|
104 | 0x10 GPL R/O 1 SATA NCQ Queued Error log |
---|
105 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
---|
106 | 0x12 GPL R/O 1 SATA NCQ NON-DATA log |
---|
107 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log |
---|
108 | 0x15 GPL R/W 1 SATA Rebuild Assist log |
---|
109 | 0x21 GPL R/O 1 Write stream error log |
---|
110 | 0x22 GPL R/O 1 Read stream error log |
---|
111 | 0x24 GPL R/O 256 Current Device Internal Status Data log |
---|
112 | 0x25 GPL R/O 256 Saved Device Internal Status Data log |
---|
113 | 0x2f GPL - 1 Reserved |
---|
114 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
115 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
116 | 0xd8-0xd9 GPL,SL VS 1 Device vendor specific log |
---|
117 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
118 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
119 | |
---|
120 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
---|
121 | No Errors Logged |
---|
122 | |
---|
123 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
124 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
125 | # 1 Short offline Completed without error 00% 1133 - |
---|
126 | |
---|
127 | SMART Selective self-test log data structure revision number 1 |
---|
128 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
129 | 1 0 0 Not_testing |
---|
130 | 2 0 0 Not_testing |
---|
131 | 3 0 0 Not_testing |
---|
132 | 4 0 0 Not_testing |
---|
133 | 5 0 0 Not_testing |
---|
134 | Selective self-test flags (0x0): |
---|
135 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
136 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
137 | |
---|
138 | SCT Status Version: 3 |
---|
139 | SCT Version (vendor specific): 256 (0x0100) |
---|
140 | SCT Support Level: 0 |
---|
141 | Device State: Active (0) |
---|
142 | Current Temperature: 38 Celsius |
---|
143 | Power Cycle Min/Max Temperature: 36/38 Celsius |
---|
144 | Lifetime Min/Max Temperature: 22/41 Celsius |
---|
145 | Under/Over Temperature Limit Count: 0/0 |
---|
146 | SMART Status: 0xc24f (PASSED) |
---|
147 | |
---|
148 | SCT Temperature History Version: 2 |
---|
149 | Temperature Sampling Period: 1 minute |
---|
150 | Temperature Logging Interval: 1 minute |
---|
151 | Min/Max recommended Temperature: 0/60 Celsius |
---|
152 | Min/Max Temperature Limit: -40/70 Celsius |
---|
153 | Temperature History Size (Index): 128 (109) |
---|
154 | |
---|
155 | Index Estimated Time Temperature Celsius |
---|
156 | 110 2021-11-15 13:08 37 ****************** |
---|
157 | ... ..( 4 skipped). .. ****************** |
---|
158 | 115 2021-11-15 13:13 37 ****************** |
---|
159 | 116 2021-11-15 13:14 36 ***************** |
---|
160 | 117 2021-11-15 13:15 37 ****************** |
---|
161 | ... ..( 7 skipped). .. ****************** |
---|
162 | 125 2021-11-15 13:23 37 ****************** |
---|
163 | 126 2021-11-15 13:24 38 ******************* |
---|
164 | ... ..( 16 skipped). .. ******************* |
---|
165 | 15 2021-11-15 13:41 38 ******************* |
---|
166 | 16 2021-11-15 13:42 37 ****************** |
---|
167 | ... ..( 4 skipped). .. ****************** |
---|
168 | 21 2021-11-15 13:47 37 ****************** |
---|
169 | 22 2021-11-15 13:48 38 ******************* |
---|
170 | ... ..( 12 skipped). .. ******************* |
---|
171 | 35 2021-11-15 14:01 38 ******************* |
---|
172 | 36 2021-11-15 14:02 37 ****************** |
---|
173 | ... ..( 8 skipped). .. ****************** |
---|
174 | 45 2021-11-15 14:11 37 ****************** |
---|
175 | 46 2021-11-15 14:12 36 ***************** |
---|
176 | ... ..( 2 skipped). .. ***************** |
---|
177 | 49 2021-11-15 14:15 36 ***************** |
---|
178 | 50 2021-11-15 14:16 37 ****************** |
---|
179 | ... ..( 17 skipped). .. ****************** |
---|
180 | 68 2021-11-15 14:34 37 ****************** |
---|
181 | 69 2021-11-15 14:35 36 ***************** |
---|
182 | ... ..( 12 skipped). .. ***************** |
---|
183 | 82 2021-11-15 14:48 36 ***************** |
---|
184 | 83 2021-11-15 14:49 37 ****************** |
---|
185 | ... ..( 9 skipped). .. ****************** |
---|
186 | 93 2021-11-15 14:59 37 ****************** |
---|
187 | 94 2021-11-15 15:00 36 ***************** |
---|
188 | ... ..( 2 skipped). .. ***************** |
---|
189 | 97 2021-11-15 15:03 36 ***************** |
---|
190 | 98 2021-11-15 15:04 37 ****************** |
---|
191 | ... ..( 8 skipped). .. ****************** |
---|
192 | 107 2021-11-15 15:13 37 ****************** |
---|
193 | 108 2021-11-15 15:14 38 ******************* |
---|
194 | 109 2021-11-15 15:15 37 ****************** |
---|
195 | |
---|
196 | SCT Error Recovery Control: |
---|
197 | Read: Disabled |
---|
198 | Write: Disabled |
---|
199 | |
---|
200 | Device Statistics (GP/SMART Log 0x04) not supported |
---|
201 | |
---|
202 | SATA Phy Event Counters (GP Log 0x11) |
---|
203 | ID Size Value Description |
---|
204 | 0x0001 2 0 Command failed due to ICRC error |
---|
205 | 0x0002 2 0 R_ERR response for data FIS |
---|
206 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
207 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
208 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
209 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
210 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
211 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
212 | 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy |
---|
213 | 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET |
---|
214 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
215 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
---|
216 | |
---|