| 1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-106-generic] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: WDC WUH721818ALN6L4
|
|---|
| 6 | Serial Number: 2BG0134G
|
|---|
| 7 | LU WWN Device Id: 5 000cca 295c00422
|
|---|
| 8 | Firmware Version: PCGNW088
|
|---|
| 9 | User Capacity: 16,000,900,661,248 bytes [16.0 TB]
|
|---|
| 10 | Sector Size: 4096 bytes logical/physical
|
|---|
| 11 | Rotation Rate: 7200 rpm
|
|---|
| 12 | Form Factor: 3.5 inches
|
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 14 | ATA Version is: Unknown(0x0ffc) (unknown minor revision code: 0x009c)
|
|---|
| 15 | SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 16 | Local Time is: Wed Aug 5 13:56:14 2020 CDT
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 |
|
|---|
| 20 | === START OF READ SMART DATA SECTION ===
|
|---|
| 21 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 22 |
|
|---|
| 23 | General SMART Values:
|
|---|
| 24 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 25 | was completed without error.
|
|---|
| 26 | Auto Offline Data Collection: Enabled.
|
|---|
| 27 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 28 | without error or no self-test has ever
|
|---|
| 29 | been run.
|
|---|
| 30 | Total time to complete Offline
|
|---|
| 31 | data collection: ( 101) seconds.
|
|---|
| 32 | Offline data collection
|
|---|
| 33 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 34 | Auto Offline data collection on/off support.
|
|---|
| 35 | Suspend Offline collection upon new
|
|---|
| 36 | command.
|
|---|
| 37 | Offline surface scan supported.
|
|---|
| 38 | Self-test supported.
|
|---|
| 39 | No Conveyance Self-test supported.
|
|---|
| 40 | Selective Self-test supported.
|
|---|
| 41 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 42 | power-saving mode.
|
|---|
| 43 | Supports SMART auto save timer.
|
|---|
| 44 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 45 | General Purpose Logging supported.
|
|---|
| 46 | Short self-test routine
|
|---|
| 47 | recommended polling time: ( 2) minutes.
|
|---|
| 48 | Extended self-test routine
|
|---|
| 49 | recommended polling time: (1770) minutes.
|
|---|
| 50 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 51 | SCT Error Recovery Control supported.
|
|---|
| 52 | SCT Feature Control supported.
|
|---|
| 53 | SCT Data Table supported.
|
|---|
| 54 |
|
|---|
| 55 | SMART Attributes Data Structure revision number: 16
|
|---|
| 56 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 57 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 58 | 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
|
|---|
| 59 | 2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 100
|
|---|
| 60 | 3 Spin_Up_Time 0x0007 083 083 001 Pre-fail Always - 345 (Average 345)
|
|---|
| 61 | 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 7
|
|---|
| 62 | 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
|
|---|
| 63 | 7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
|
|---|
| 64 | 8 Seek_Time_Performance 0x0005 140 140 020 Pre-fail Offline - 15
|
|---|
| 65 | 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3610
|
|---|
| 66 | 10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0
|
|---|
| 67 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7
|
|---|
| 68 | 22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
|
|---|
| 69 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 206
|
|---|
| 70 | 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 206
|
|---|
| 71 | 194 Temperature_Celsius 0x0002 060 060 000 Old_age Always - 34 (Min/Max 23/38)
|
|---|
| 72 | 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 73 | 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
|
|---|
| 74 | 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
|
|---|
| 75 | 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
|
|---|
| 76 |
|
|---|
| 77 | SMART Error Log Version: 1
|
|---|
| 78 | No Errors Logged
|
|---|
| 79 |
|
|---|
| 80 | SMART Self-test log structure revision number 1
|
|---|
| 81 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 82 | # 1 Short offline Completed without error 00% 3587 -
|
|---|
| 83 |
|
|---|
| 84 | SMART Selective self-test log data structure revision number 1
|
|---|
| 85 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 86 | 1 0 0 Not_testing
|
|---|
| 87 | 2 0 0 Not_testing
|
|---|
| 88 | 3 0 0 Not_testing
|
|---|
| 89 | 4 0 0 Not_testing
|
|---|
| 90 | 5 0 0 Not_testing
|
|---|
| 91 | Selective self-test flags (0x0):
|
|---|
| 92 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 93 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 94 |
|
|---|
