1 | smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.11.22-5-pve] (local build)
|
---|
2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: HP SSD S700 500GB
|
---|
6 | Firmware Version: S0509A1
|
---|
7 | User Capacity: 500,107,862,016 bytes [500 GB]
|
---|
8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
9 | Rotation Rate: Solid State Device
|
---|
10 | Form Factor: 2.5 inches
|
---|
11 | TRIM Command: Available, deterministic, zeroed
|
---|
12 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
13 | ATA Version is: ACS-2 T13/2015-D revision 3
|
---|
14 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
15 | Local Time is: Mon Oct 25 11:01:50 2021 CDT
|
---|
16 | SMART support is: Available - device has SMART capability.
|
---|
17 | SMART support is: Enabled
|
---|
18 | AAM feature is: Unavailable
|
---|
19 | APM level is: 254 (maximum performance)
|
---|
20 | Rd look-ahead is: Enabled
|
---|
21 | Write cache is: Enabled
|
---|
22 | DSN feature is: Unavailable
|
---|
23 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
24 | Wt Cache Reorder: Unavailable
|
---|
25 |
|
---|
26 | === START OF READ SMART DATA SECTION ===
|
---|
27 | SMART overall-health self-assessment test result: PASSED
|
---|
28 |
|
---|
29 | General SMART Values:
|
---|
30 | Offline data collection status: (0x02) Offline data collection activity
|
---|
31 | was completed without error.
|
---|
32 | Auto Offline Data Collection: Disabled.
|
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
34 | without error or no self-test has ever
|
---|
35 | been run.
|
---|
36 | Total time to complete Offline
|
---|
37 | data collection: ( 120) seconds.
|
---|
38 | Offline data collection
|
---|
39 | capabilities: (0x5b) SMART execute Offline immediate.
|
---|
40 | Auto Offline data collection on/off support.
|
---|
41 | Suspend Offline collection upon new
|
---|
42 | command.
|
---|
43 | Offline surface scan supported.
|
---|
44 | Self-test supported.
|
---|
45 | No Conveyance Self-test supported.
|
---|
46 | Selective Self-test supported.
|
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
48 | power-saving mode.
|
---|
49 | Supports SMART auto save timer.
|
---|
50 | Error logging capability: (0x01) Error logging supported.
|
---|
51 | General Purpose Logging supported.
|
---|
52 | Short self-test routine
|
---|
53 | recommended polling time: ( 2) minutes.
|
---|
54 | Extended self-test routine
|
---|
55 | recommended polling time: ( 10) minutes.
|
---|
56 |
|
---|
57 | SMART Attributes Data Structure revision number: 1
|
---|
58 | Vendor Specific SMART Attributes with Thresholds:
|
---|
59 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
60 | 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
|
---|
61 | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
|
---|
62 | 9 Power_On_Hours -O--CK 100 100 000 - 16944
|
---|
63 | 12 Power_Cycle_Count -O--CK 100 100 000 - 35
|
---|
64 | 171 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
65 | 172 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
66 | 173 Unknown_Attribute -O--CK 100 100 005 - 92
|
---|
67 | 174 Unknown_Attribute -O--CK 100 100 000 - 33
|
---|
68 | 176 Erase_Fail_Count_Chip -O---K 100 100 000 - 100
|
---|
69 | 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
---|
70 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
---|
71 | 194 Temperature_Celsius -O---K 100 100 000 - 37
|
---|
72 | 198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
---|
73 | 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
---|
74 | 241 Total_LBAs_Written -O--CK 100 100 000 - 6903
|
---|
75 | 242 Total_LBAs_Read -O--CK 100 100 000 - 5722
|
---|
76 | 243 Unknown_Attribute -O--CK 100 100 000 - 22591
|
---|
77 | ||||||_ K auto-keep
|
---|
78 | |||||__ C event count
|
---|
79 | ||||___ R error rate
|
---|
80 | |||____ S speed/performance
|
---|
81 | ||_____ O updated online
|
---|
82 | |______ P prefailure warning
|
---|
83 |
|
---|
84 | General Purpose Log Directory Version 1
|
---|
85 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
86 | Address Access R/W Size Description
|
---|
87 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
88 | 0x01 SL R/O 1 Summary SMART error log
|
---|
89 | 0x02 SL R/O 1 Comprehensive SMART error log
|
---|
90 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
---|
91 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
92 | 0x06 SL R/O 1 SMART self-test log
|
---|
93 | 0x07 GPL R/O 1 Extended self-test log
|
---|
94 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
95 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
96 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
97 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
98 | 0xde GPL VS 8 Device vendor specific log
|
---|
99 |
|
---|
100 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
---|
101 | No Errors Logged
|
---|
102 |
|
---|
103 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
104 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
105 | # 1 Short offline Completed without error 00% 16920 -
|
---|
106 |
|
---|
107 | SMART Selective self-test log data structure revision number 0
|
---|
108 | Note: revision number not 1 implies that no selective self-test has ever been run
|
---|
109 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
110 | 1 0 0 Not_testing
|
---|
111 | 2 0 0 Not_testing
|
---|
112 | 3 0 0 Not_testing
|
---|
113 | 4 0 0 Not_testing
|
---|
114 | 5 0 0 Not_testing
|
---|
115 | Selective self-test flags (0x0):
|
---|
116 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
117 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
118 |
|
---|
119 | SCT Commands not supported
|
---|
120 |
|
---|
121 | Device Statistics (GP Log 0x04)
|
---|
122 | Page Offset Size Value Flags Description
|
---|
123 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
---|
124 | 0x01 0x008 4 35 --- Lifetime Power-On Resets
|
---|
125 | 0x01 0x010 4 16944 --- Power-on Hours
|
---|
126 | 0x01 0x018 6 1592778180 --- Logical Sectors Written
|
---|
127 | 0x01 0x020 6 13029935 --- Number of Write Commands
|
---|
128 | 0x01 0x028 6 3411478444 --- Logical Sectors Read
|
---|
129 | 0x01 0x030 6 3617772 --- Number of Read Commands
|
---|
130 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
131 | 0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
---|
132 | |||_ C monitored condition met
|
---|
133 | ||__ D supports DSN
|
---|
134 | |___ N normalized value
|
---|
135 |
|
---|
136 | Pending Defects log (GP Log 0x0c) not supported
|
---|
137 |
|
---|
138 | SATA Phy Event Counters (GP Log 0x11)
|
---|
139 | ID Size Value Description
|
---|
140 | 0x0001 4 0 Command failed due to ICRC error
|
---|
141 | 0x0002 4 0 R_ERR response for data FIS
|
---|
142 | 0x0005 4 0 R_ERR response for non-data FIS
|
---|
143 | 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
---|
144 |
|
---|