| 1 | smartctl 7.0 2018-12-30 r4883 [i686-w64-mingw32-2019(64)] (sf-7.0-1) |
|---|
| 2 | Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 3 | |
|---|
| 4 | === START OF INFORMATION SECTION === |
|---|
| 5 | Device Model: SPCC Solid State Disk |
|---|
| 6 | Serial Number: P2000802000000000418 |
|---|
| 7 | LU WWN Device Id: 5 000000 000000000 |
|---|
| 8 | Firmware Version: H190117H |
|---|
| 9 | User Capacity: 512,110,190,592 bytes [512 GB] |
|---|
| 10 | Sector Size: 512 bytes logical/physical |
|---|
| 11 | Rotation Rate: Solid State Device |
|---|
| 12 | Form Factor: 2.5 inches |
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall] |
|---|
| 14 | ATA Version is: ACS-2 (minor revision not indicated) |
|---|
| 15 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) |
|---|
| 16 | Local Time is: Thu Oct 07 09:34:47 2021 EDT |
|---|
| 17 | SMART support is: Available - device has SMART capability. |
|---|
| 18 | SMART support is: Enabled |
|---|
| 19 | AAM feature is: Unavailable |
|---|
| 20 | APM feature is: Unavailable |
|---|
| 21 | Rd look-ahead is: Enabled |
|---|
| 22 | Write cache is: Enabled |
|---|
| 23 | DSN feature is: Unavailable |
|---|
| 24 | ATA Security is: Disabled, frozen [SEC2] |
|---|
| 25 | Wt Cache Reorder: Unknown (0xe001) |
|---|
| 26 | |
|---|
| 27 | === START OF READ SMART DATA SECTION === |
|---|
| 28 | SMART overall-health self-assessment test result: PASSED |
|---|
| 29 | |
|---|
| 30 | General SMART Values: |
|---|
| 31 | Offline data collection status: (0x02) Offline data collection activity |
|---|
| 32 | was completed without error. |
|---|
| 33 | Auto Offline Data Collection: Disabled. |
|---|
| 34 | Self-test execution status: ( 0) The previous self-test routine completed |
|---|
| 35 | without error or no self-test has ever |
|---|
| 36 | been run. |
|---|
| 37 | Total time to complete Offline |
|---|
| 38 | data collection: ( 33) seconds. |
|---|
| 39 | Offline data collection |
|---|
| 40 | capabilities: (0x7b) SMART execute Offline immediate. |
|---|
| 41 | Auto Offline data collection on/off support. |
|---|
| 42 | Suspend Offline collection upon new |
|---|
| 43 | command. |
|---|
| 44 | Offline surface scan supported. |
|---|
| 45 | Self-test supported. |
|---|
| 46 | Conveyance Self-test supported. |
|---|
| 47 | Selective Self-test supported. |
|---|
| 48 | SMART capabilities: (0x0003) Saves SMART data before entering |
|---|
| 49 | power-saving mode. |
|---|
| 50 | Supports SMART auto save timer. |
|---|
| 51 | Error logging capability: (0x01) Error logging supported. |
|---|
| 52 | General Purpose Logging supported. |
|---|
| 53 | Short self-test routine |
|---|
| 54 | recommended polling time: ( 2) minutes. |
|---|
| 55 | Extended self-test routine |
|---|
| 56 | recommended polling time: ( 2) minutes. |
|---|
| 57 | Conveyance self-test routine |
|---|
| 58 | recommended polling time: ( 2) minutes. |
|---|
| 59 | SCT capabilities: (0x0031) SCT Status supported. |
|---|
| 60 | SCT Feature Control supported. |
|---|
| 61 | SCT Data Table supported. |
|---|
| 62 | |
|---|
| 63 | SMART Attributes Data Structure revision number: 16 |
|---|
| 64 | Vendor Specific SMART Attributes with Thresholds: |
|---|
| 65 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
|---|
| 66 | 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 |
|---|
| 67 | 9 Power_On_Hours -O--C- 100 100 000 - 10886 |
|---|
| 68 | 12 Power_Cycle_Count -O--C- 100 100 000 - 59 |
|---|
| 69 | 167 Unknown_Attribute -O---K 100 100 000 - 0 |
|---|
| 70 | 168 Unknown_Attribute -O--C- 100 100 000 - 0 |
|---|
| 71 | 169 Unknown_Attribute PO--C- 096 096 010 - 15728655 |
|---|
| 72 | 171 Unknown_Attribute -O--CK 000 000 000 - 0 |
|---|
| 73 | 172 Unknown_Attribute -O--CK 000 000 000 - 0 |
|---|
| 74 | 173 Unknown_Attribute -O--C- 200 200 000 - 124557000741 |
|---|
| 75 | 175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 |
|---|
| 76 | 177 Wear_Leveling_Count -O--C- 100 100 000 - 0 |
|---|
| 77 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 6560 |
|---|
| 78 | 187 Reported_Uncorrect -O--CK 100 000 000 - 0 |
|---|
| 79 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 50 |
|---|
| 80 | 194 Temperature_Celsius -O---K 048 048 000 - 48 (Min/Max 48/48) |
|---|
| 81 | 199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 |
|---|
| 82 | 206 Unknown_SSD_Attribute -O--CK 200 200 000 - 29 |
|---|
| 83 | 207 Unknown_SSD_Attribute -O--CK 200 200 000 - 45 |
|---|
| 84 | 208 Unknown_SSD_Attribute -O--CK 200 200 000 - 37 |
|---|
| 85 | 209 Unknown_SSD_Attribute -O--CK 200 200 000 - 451 |
|---|
| 86 | 210 Unknown_Attribute -O--CK 200 200 000 - 490 |
|---|
| 87 | 211 Unknown_Attribute -O--CK 200 200 000 - 456 |
|---|
| 88 | 231 Unknown_SSD_Attribute PO---K 098 098 005 - 2 |
|---|
| 89 | 241 Total_LBAs_Written -O--CK 100 100 000 - 8816 |
|---|
| 90 | 242 Total_LBAs_Read -O--CK 100 100 000 - 5485 |
|---|
| 91 | 245 Unknown_Attribute -O--CK 100 100 000 - 0 |
|---|
| 92 | ||||||_ K auto-keep |
|---|
| 93 | |||||__ C event count |
|---|
| 94 | ||||___ R error rate |
|---|
| 95 | |||____ S speed/performance |
|---|
| 96 | ||_____ O updated online |
|---|
| 97 | |______ P prefailure warning |
|---|
| 98 | |
|---|
| 99 | General Purpose Log Directory Version 1 |
|---|
| 100 | SMART Log Directory Version 1 [multi-sector log support] |
|---|
| 101 | Address Access R/W Size Description |
|---|
| 102 | 0x00 GPL,SL R/O 1 Log Directory |
|---|
| 103 | 0x01 SL R/O 1 Summary SMART error log |
|---|
| 104 | 0x02 SL R/O 51 Comprehensive SMART error log |
|---|
| 105 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log |
|---|
| 106 | 0x04 GPL,SL R/O 8 Device Statistics log |
|---|
| 107 | 0x06 SL R/O 1 SMART self-test log |
|---|
| 108 | 0x07 GPL R/O 1 Extended self-test log |
|---|
| 109 | 0x09 SL R/W 1 Selective self-test log |
|---|
| 110 | 0x10 GPL R/O 1 NCQ Command Error log |
|---|
| 111 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
|---|
| 112 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
|---|
| 113 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
|---|
| 114 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
|---|
| 115 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
|---|
| 116 | |
|---|
| 117 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors) |
|---|
| 118 | No Errors Logged |
|---|
| 119 | |
|---|
| 120 | SMART Extended Self-test Log Version: 1 (1 sectors) |
|---|
| 121 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
|---|
| 122 | # 1 Short offline Completed without error 00% 10886 - |
|---|
| 123 | # 2 Short offline Interrupted (host reset) 00% 2 - |
|---|
| 124 | # 3 Short offline Interrupted (host reset) 00% 0 - |
|---|
| 125 | |
|---|
| 126 | SMART Selective self-test log data structure revision number 1 |
|---|
| 127 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
|---|
| 128 | 1 0 0 Not_testing |
|---|
| 129 | 2 0 0 Not_testing |
|---|
| 130 | 3 0 0 Not_testing |
|---|
| 131 | 4 0 0 Not_testing |
|---|
| 132 | 5 0 0 Not_testing |
|---|
| 133 | Selective self-test flags (0x0): |
|---|
| 134 | After scanning selected spans, do NOT read-scan remainder of disk. |
|---|
| 135 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
|---|
| 136 | |
|---|
| 137 | SCT Status Version: 3 |
|---|
| 138 | SCT Version (vendor specific): 1 (0x0001) |
|---|
| 139 | Device State: Active (0) |
|---|
| 140 | Current Temperature: 48 Celsius |
|---|
| 141 | Power Cycle Min/Max Temperature: ?/48 Celsius |
|---|
| 142 | Lifetime Min/Max Temperature: ?/ ? Celsius |
|---|
| 143 | Under/Over Temperature Limit Count: 0/0 |
|---|
| 144 | |
|---|
| 145 | SCT Temperature History Version: 2 |
|---|
| 146 | Temperature Sampling Period: 1 minute |
|---|
| 147 | Temperature Logging Interval: 1 minute |
|---|
| 148 | Min/Max recommended Temperature: -127/127 Celsius |
|---|
| 149 | Min/Max Temperature Limit: -127/127 Celsius |
|---|
| 150 | Temperature History Size (Index): 478 (126) |
|---|
| 151 | |
|---|
| 152 | Index Estimated Time Temperature Celsius |
|---|
| 153 | 127 2021-10-07 01:37 48 ***************************** |
|---|
| 154 | ... ..(476 skipped). .. ***************************** |
|---|
| 155 | 126 2021-10-07 09:34 48 ***************************** |
|---|
| 156 | |
|---|
| 157 | SCT Error Recovery Control command not supported |
|---|
| 158 | |
|---|
| 159 | Device Statistics (GP Log 0x04) |
|---|
| 160 | Page Offset Size Value Flags Description |
|---|
| 161 | 0x01 ===== = = === == General Statistics (rev 1) == |
|---|
| 162 | 0x01 0x008 4 59 --- Lifetime Power-On Resets |
|---|
| 163 | 0x01 0x010 4 10886 --- Power-on Hours |
|---|
| 164 | 0x01 0x018 6 18488871061 --- Logical Sectors Written |
|---|
| 165 | 0x01 0x020 6 950910910 --- Number of Write Commands |
|---|
| 166 | 0x01 0x028 6 11504861217 --- Logical Sectors Read |
|---|
| 167 | 0x01 0x030 6 496003789 --- Number of Read Commands |
|---|
| 168 | 0x01 0x038 6 10033581596292 --- Date and Time TimeStamp |
|---|
| 169 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
|---|
| 170 | 0x07 0x008 1 6 N-- Percentage Used Endurance Indicator |
|---|
| 171 | |||_ C monitored condition met |
|---|
| 172 | ||__ D supports DSN |
|---|
| 173 | |___ N normalized value |
|---|
| 174 | |
|---|
| 175 | Pending Defects log (GP Log 0x0c) not supported |
|---|
| 176 | |
|---|
| 177 | SATA Phy Event Counters (GP Log 0x11) |
|---|
| 178 | ID Size Value Description |
|---|
| 179 | 0x0001 2 0 Command failed due to ICRC error |
|---|
| 180 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
|---|
| 181 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
|---|
| 182 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
|---|
| 183 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
|---|
| 184 | 0x0008 2 0 Device-to-host non-data FIS retries |
|---|
| 185 | 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy |
|---|
| 186 | 0x000a 4 77 Device-to-host register FISes sent due to a COMRESET |
|---|
| 187 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
|---|
| 188 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
|---|
| 189 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
|---|
| 190 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
|---|
| 191 | |
|---|
