1 | Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". |
---|
2 | Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. |
---|
3 | Testing has begun. |
---|
4 | Please wait 402 minutes for test to complete. |
---|
5 | Test will complete after Thu Sep 16 14:00:42 2021 RDT |
---|
6 | Use smartctl -X to abort test. |
---|
7 | Test running: status = 249, 90% remaining |
---|
8 | Checking again in 40.2 minutes (i.e. at 07:58) |
---|
9 | Test running: status = 249, 90% remaining |
---|
10 | Checking again in 40.2 minutes (i.e. at 08:39) |
---|
11 | Test running: status = 248, 80% remaining |
---|
12 | Checking again in 40.2 minutes (i.e. at 09:19) |
---|
13 | Test running: status = 247, 70% remaining |
---|
14 | Checking again in 40.2 minutes (i.e. at 09:59) |
---|
15 | Test running: status = 246, 60% remaining |
---|
16 | Checking again in 40.2 minutes (i.e. at 10:39) |
---|
17 | Test running: status = 245, 50% remaining |
---|
18 | Checking again in 40.2 minutes (i.e. at 11:19) |
---|
19 | Test running: status = 244, 40% remaining |
---|
20 | Checking again in 40.2 minutes (i.e. at 12:00) |
---|
21 | Test running: status = 243, 30% remaining |
---|
22 | Checking again in 40.2 minutes (i.e. at 12:40) |
---|
23 | Test running: status = 242, 20% remaining |
---|
24 | Checking again in 40.2 minutes (i.e. at 13:20) |
---|
25 | Test running: status = 241, 10% remaining |
---|
26 | Checking again in 40.2 minutes (i.e. at 14:00) |
---|
27 | Test running: status = 241, 10% remaining |
---|
28 | Checking again in 40.2 minutes (i.e. at 14:40) |
---|
29 | Test running: status = 241, 10% remaining |
---|
30 | Checking again in 40.2 minutes (i.e. at 15:21) |
---|
31 | Test running: status = 241, 10% remaining |
---|
32 | Checking again in 40.2 minutes (i.e. at 16:01) |
---|
33 | Test running: status = 241, 10% remaining |
---|
34 | Checking again in 40.2 minutes (i.e. at 16:41) |
---|
35 | Test running: status = 241, 10% remaining |
---|
36 | Checking again in 40.2 minutes (i.e. at 17:21) |
---|
37 | Test running: status = 241, 10% remaining |
---|
38 | Checking again in 40.2 minutes (i.e. at 18:01) |
---|
39 | Test running: status = 241, 10% remaining |
---|
40 | Checking again in 40.2 minutes (i.e. at 18:42) |
---|
41 | Test running: status = 241, 10% remaining |
---|
42 | Checking again in 40.2 minutes (i.e. at 19:22) |
---|
43 | Test running: status = 241, 10% remaining |
---|
44 | Checking again in 40.2 minutes (i.e. at 20:02) |
---|
45 | Test running: status = 241, 10% remaining |
---|
46 | Checking again in 40.2 minutes (i.e. at 20:42) |
---|
47 | Test running: status = 241, 10% remaining |
---|
48 | Checking again in 40.2 minutes (i.e. at 21:23) |
---|
49 | Test running: status = 241, 10% remaining |
---|
50 | Checking again in 40.2 minutes (i.e. at 22:03) |
---|
51 | Test running: status = 241, 10% remaining |
---|
52 | Checking again in 40.2 minutes (i.e. at 22:43) |
---|
53 | Test running: status = 241, 10% remaining |
---|
54 | Checking again in 40.2 minutes (i.e. at 23:23) |
---|
55 | Test running: status = 241, 10% remaining |
---|
56 | Checking again in 40.2 minutes (i.e. at 00:03) |
---|
57 | Test running: status = 241, 10% remaining |
---|
58 | Checking again in 40.2 minutes (i.e. at 00:44) |
---|
59 | Test running: status = 241, 10% remaining |
---|
60 | Checking again in 40.2 minutes (i.e. at 01:24) |
---|
61 | Test running: status = 241, 10% remaining |
---|
62 | Checking again in 40.2 minutes (i.e. at 02:04) |
---|
63 | Test running: status = 241, 10% remaining |
---|
64 | Checking again in 40.2 minutes (i.e. at 02:44) |
---|
65 | Test running: status = 241, 10% remaining |
---|
66 | Checking again in 40.2 minutes (i.e. at 03:24) |
---|
67 | Test running: status = 241, 10% remaining |
---|
68 | Checking again in 40.2 minutes (i.e. at 04:05) |
---|
69 | Test running: status = 241, 10% remaining |
---|
70 | Checking again in 40.2 minutes (i.e. at 04:45) |
---|
71 | Test running: status = 241, 10% remaining |
---|
72 | Checking again in 40.2 minutes (i.e. at 05:25) |
---|
73 | Test running: status = 241, 10% remaining |
---|
74 | Checking again in 40.2 minutes (i.e. at 06:05) |
---|
75 | Test running: status = 241, 10% remaining |
---|
76 | Checking again in 40.2 minutes (i.e. at 06:45) |
---|
77 | Test running: status = 241, 10% remaining |
---|
78 | Checking again in 40.2 minutes (i.e. at 07:26) |
---|
79 | Test running: status = 241, 10% remaining |
---|
80 | Checking again in 40.2 minutes (i.e. at 08:06) |
---|
81 | Test running: status = 241, 10% remaining |
---|
82 | Checking again in 40.2 minutes (i.e. at 08:46) |
---|
83 | Test running: status = 241, 10% remaining |
---|
84 | Checking again in 40.2 minutes (i.e. at 09:26) |
---|
85 | Test running: status = 241, 10% remaining |
---|
86 | Checking again in 40.2 minutes (i.e. at 10:06) |
---|
87 | Test running: status = 241, 10% remaining |
---|
88 | Checking again in 40.2 minutes (i.e. at 10:47) |
---|
89 | Test running: status = 241, 10% remaining |
---|
90 | Checking again in 40.2 minutes (i.e. at 11:27) |
---|
91 | |
---|
92 | |
---|
93 | smartctl 7.2 2020-12-30 r5155 [x86_64-w64-mingw32-w10-b19043] (sf-7.2-1) |
---|
94 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
95 | |
---|
96 | === START OF INFORMATION SECTION === |
---|
97 | Model Family: Western Digital Blue Mobile (SMR) |
---|
98 | Device Model: WDC WD20SPZX-60UA7T0 |
---|
99 | Serial Number: WD-WX92E906WSHF |
---|
100 | LU WWN Device Id: 5 0014ee 268a28907 |
---|
101 | Firmware Version: 01.01A01 |
---|
102 | User Capacity: 2,000,398,934,016 bytes [2.00 TB] |
---|
103 | Sector Sizes: 512 bytes logical, 4096 bytes physical |
---|
104 | Rotation Rate: 5400 rpm |
---|
105 | Form Factor: 2.5 inches |
---|
106 | TRIM Command: Available, deterministic |
---|
107 | Device is: In smartctl database [for details use: -P show] |
---|
108 | ATA Version is: ACS-3 T13/2161-D revision 5 |
---|
109 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) |
---|
110 | Local Time is: Fri Sep 17 17:02:43 2021 RDT |
---|
111 | SMART support is: Available - device has SMART capability. |
---|
112 | SMART support is: Enabled |
---|
113 | |
---|
114 | === START OF READ SMART DATA SECTION === |
---|
115 | SMART overall-health self-assessment test result: PASSED |
---|
116 | |
---|
117 | General SMART Values: |
---|
118 | Offline data collection status: (0x00) Offline data collection activity |
---|
119 | was never started. |
---|
120 | Auto Offline Data Collection: Disabled. |
---|
121 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
122 | without error or no self-test has ever |
---|
123 | been run. |
---|
124 | Total time to complete Offline |
---|
125 | data collection: (14760) seconds. |
---|
126 | Offline data collection |
---|
127 | capabilities: (0x5b) SMART execute Offline immediate. |
---|
128 | Auto Offline data collection on/off support. |
---|
129 | Suspend Offline collection upon new |
---|
130 | command. |
---|
131 | Offline surface scan supported. |
---|
132 | Self-test supported. |
---|
133 | No Conveyance Self-test supported. |
---|
134 | Selective Self-test supported. |
---|
135 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
136 | power-saving mode. |
---|
137 | Supports SMART auto save timer. |
---|
138 | Error logging capability: (0x01) Error logging supported. |
---|
139 | General Purpose Logging supported. |
---|
140 | Short self-test routine |
---|
141 | recommended polling time: ( 2) minutes. |
---|
142 | Extended self-test routine |
---|
143 | recommended polling time: ( 403) minutes. |
---|
144 | SCT capabilities: (0x303d) SCT Status supported. |
---|
145 | SCT Error Recovery Control supported. |
---|
146 | SCT Feature Control supported. |
---|
147 | SCT Data Table supported. |
---|
148 | |
---|
149 | SMART Attributes Data Structure revision number: 32 |
---|
150 | Vendor Specific SMART Attributes with Thresholds: |
---|
151 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
---|
152 | 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 |
---|
153 | 3 Spin_Up_Time 0x0027 100 100 021 Pre-fail Always - 0 |
---|
154 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3 |
---|
155 | 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 |
---|
156 | 7 Seek_Error_Rate 0x002f 100 100 030 Pre-fail Always - 6004 |
---|
157 | 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 66 |
---|
158 | 10 Spin_Retry_Count 0x0033 100 100 050 Pre-fail Always - 0 |
---|
159 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2 |
---|
160 | 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 |
---|
161 | 184 End-to-End_Error 0x003b 100 100 097 Pre-fail Always - 0 |
---|
162 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 |
---|
163 | 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 |
---|
164 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 |
---|
165 | 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 |
---|
166 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0 |
---|
167 | 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 16 |
---|
168 | 194 Temperature_Celsius 0x0022 033 038 000 Old_age Always - 33 (Min/Max 30/38) |
---|
169 | 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 |
---|
170 | 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 |
---|
171 | 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 |
---|
172 | 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 |
---|
173 | 240 Head_Flying_Hours 0x0032 100 100 000 Old_age Always - 83192 |
---|
174 | 243 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 811354 |
---|
175 | |
---|
176 | SMART Error Log Version: 1 |
---|
177 | No Errors Logged |
---|
178 | |
---|
179 | SMART Self-test log structure revision number 1 |
---|
180 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
181 | # 1 Short offline Completed without error 00% 60 - |
---|
182 | # 2 Extended offline Aborted by host 10% 60 - |
---|
183 | # 3 Extended offline Aborted by host 10% 32 - |
---|
184 | |
---|
185 | SMART Selective self-test log data structure revision number 1 |
---|
186 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
187 | 1 0 0 Not_testing |
---|
188 | 2 0 0 Not_testing |
---|
189 | 3 0 0 Not_testing |
---|
190 | 4 0 0 Not_testing |
---|
191 | 5 0 0 Not_testing |
---|
192 | Selective self-test flags (0x0): |
---|
193 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
194 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
195 | |
---|