| 1 | smartctl 7.2 2020-12-30 r5155 [x86_64-w64-mingw32-w10-b19043] (sf-7.2-1)
|
|---|
| 2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | \\.\PhysicalDrive3: successfully opened (without admin rights)
|
|---|
| 5 | GetDevicePowerState() succeeded, state=1
|
|---|
| 6 | \\.\PhysicalDrive3: successfully opened
|
|---|
| 7 |
|
|---|
| 8 | REPORT-IOCTL: Device=/dev/sdd Command=CHECK POWER MODE
|
|---|
| 9 | Input: FR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., CMD=0xe5
|
|---|
| 10 | GetDevicePowerState() succeeded, state=1
|
|---|
| 11 | IOCTL_ATA_PASS_THROUGH failed, Error=50
|
|---|
| 12 | Input : CMD=0xe5, FR=0x00, SC=0x00, SN=0x00, CL=0x00, CH=0x00, SEL=0x00
|
|---|
| 13 | IOCTL_IDE_PASS_THROUGH failed, Error=50
|
|---|
| 14 | Input : CMD=0xe5, FR=0x00, SC=0x00, SN=0x00, CL=0x00, CH=0x00, SEL=0x00
|
|---|
| 15 | Output: ERR=0x00, SC=0xff, LL=0x00, LM=0x00, LH=0x00, DEV=0x00, STS=0xe5
|
|---|
| 16 | REPORT-IOCTL: Device=/dev/sdd Command=CHECK POWER MODE returned 0
|
|---|
| 17 | Sector Count Register (BASE-16): ff
|
|---|
| 18 | Device is in ACTIVE or IDLE mode
|
|---|
