| 1 | smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-72-generic] (local build)
|
|---|
| 2 | Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: Verbatim Vi560 SATA III M.2 SSD
|
|---|
| 6 | Serial Number: K10548X500143
|
|---|
| 7 | LU WWN Device Id: 5 000000 000000000
|
|---|
| 8 | Firmware Version: H190505
|
|---|
| 9 | User Capacity: 256,060,514,304 bytes [256 GB]
|
|---|
| 10 | Sector Size: 512 bytes logical/physical
|
|---|
| 11 | Rotation Rate: Solid State Device
|
|---|
| 12 | Form Factor: M.2
|
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 14 | ATA Version is: ACS-2 (minor revision not indicated)
|
|---|
| 15 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 16 | Local Time is: Sat May 1 18:38:12 2021 EEST
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 | AAM feature is: Unavailable
|
|---|
| 20 | APM feature is: Unavailable
|
|---|
| 21 | Rd look-ahead is: Enabled
|
|---|
| 22 | Write cache is: Enabled
|
|---|
| 23 | DSN feature is: Unavailable
|
|---|
| 24 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 25 | Wt Cache Reorder: Unknown
|
|---|
| 26 |
|
|---|
| 27 | === START OF READ SMART DATA SECTION ===
|
|---|
| 28 | SMART Status not supported: Incomplete response, ATA output registers missing
|
|---|
| 29 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 30 | Warning: This result is based on an Attribute check.
|
|---|
| 31 |
|
|---|
| 32 | General SMART Values:
|
|---|
| 33 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 34 | was never started.
|
|---|
| 35 | Auto Offline Data Collection: Disabled.
|
|---|
| 36 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 37 | without error or no self-test has ever
|
|---|
| 38 | been run.
|
|---|
| 39 | Total time to complete Offline
|
|---|
| 40 | data collection: ( 33) seconds.
|
|---|
| 41 | Offline data collection
|
|---|
| 42 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 43 | Auto Offline data collection on/off support.
|
|---|
| 44 | Suspend Offline collection upon new
|
|---|
| 45 | command.
|
|---|
| 46 | Offline surface scan supported.
|
|---|
| 47 | Self-test supported.
|
|---|
| 48 | Conveyance Self-test supported.
|
|---|
| 49 | Selective Self-test supported.
|
|---|
| 50 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 51 | power-saving mode.
|
|---|
| 52 | Supports SMART auto save timer.
|
|---|
| 53 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 54 | General Purpose Logging supported.
|
|---|
| 55 | Short self-test routine
|
|---|
| 56 | recommended polling time: ( 2) minutes.
|
|---|
| 57 | Extended self-test routine
|
|---|
| 58 | recommended polling time: ( 2) minutes.
|
|---|
| 59 | Conveyance self-test routine
|
|---|
| 60 | recommended polling time: ( 2) minutes.
|
|---|
| 61 | SCT capabilities: (0x0031) SCT Status supported.
|
|---|
| 62 | SCT Feature Control supported.
|
|---|
| 63 | SCT Data Table supported.
|
|---|
| 64 |
|
|---|
| 65 | SMART Attributes Data Structure revision number: 19
|
|---|
| 66 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 67 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 68 | 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
|---|
| 69 | 9 Power_On_Hours -O--C- 100 100 000 - 0
|
|---|
| 70 | 12 Power_Cycle_Count -O--C- 100 100 000 - 6
|
|---|
| 71 | 167 Unknown_Attribute -O---K 100 100 000 - 0
|
|---|
| 72 | 168 Unknown_Attribute -O--C- 100 100 000 - 0
|
|---|
| 73 | 169 Unknown_Attribute PO--C- 097 097 010 - 6291468
|
|---|
| 74 | 171 Unknown_Attribute -O--CK 000 000 000 - 0
|
|---|
| 75 | 172 Unknown_Attribute -O--CK 000 000 000 - 0
|
|---|
| 76 | 173 Unknown_Attribute -O--C- 200 200 000 - 8590131202
|
|---|
| 77 | 175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
|
|---|
| 78 | 177 Wear_Leveling_Count -O--C- 100 100 000 - 0
|
|---|
| 79 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 3528
|
|---|
| 80 | 187 Reported_Uncorrect -O--CK 100 000 000 - 0
|
|---|
| 81 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 4
|
|---|
| 82 | 194 Temperature_Celsius -O---K 048 048 000 - 48 (Min/Max 48/48)
|
|---|
| 83 | 199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0
|
|---|
| 84 | 206 Unknown_SSD_Attribute -O--CK 200 200 000 - 2
|
|---|
| 85 | 207 Unknown_SSD_Attribute -O--CK 200 200 000 - 3
|
|---|
| 86 | 208 Unknown_SSD_Attribute -O--CK 200 200 000 - 2
|
|---|
| 87 | 209 Unknown_SSD_Attribute -O--CK 200 200 000 - 2
|
|---|
| 88 | 210 Unknown_Attribute -O--CK 200 200 000 - 3
|
|---|
| 89 | 211 Unknown_Attribute -O--CK 200 200 000 - 2
|
|---|
| 90 | 231 Temperature_Celsius PO---K 100 100 005 - 0
|
|---|
| 91 | 241 Total_LBAs_Written -O--CK 100 100 000 - 0
|
|---|
| 92 | 242 Total_LBAs_Read -O--CK 100 100 000 - 0
|
|---|
| 93 | 245 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 94 | ||||||_ K auto-keep
|
|---|
| 95 | |||||__ C event count
|
|---|
| 96 | ||||___ R error rate
|
|---|
| 97 | |||____ S speed/performance
|
|---|
| 98 | ||_____ O updated online
|
|---|
| 99 | |______ P prefailure warning
|
|---|
| 100 |
|
|---|
| 101 | General Purpose Log Directory Version 1
|
|---|
| 102 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 103 | Address Access R/W Size Description
|
|---|
| 104 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 105 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 106 | 0x02 SL R/O 51 Comprehensive SMART error log
|
|---|
| 107 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
|---|
| 108 | 0x04 GPL,SL R/O 8 Device Statistics log
|
|---|
| 109 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 110 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 111 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 112 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 113 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 114 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 115 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 116 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 117 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 118 |
|
|---|
| 119 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
|---|
| 120 | No Errors Logged
|
|---|
| 121 |
|
|---|
| 122 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 123 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 124 | # 1 Short offline Completed without error 00% 0 -
|
|---|
| 125 | # 2 Short offline Aborted by host 00% 0 -
|
|---|
| 126 |
|
|---|
| 127 | SMART Selective self-test log data structure revision number 1
|
|---|
| 128 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 129 | 1 0 0 Not_testing
|
|---|
| 130 | 2 0 0 Not_testing
|
|---|
| 131 | 3 0 0 Not_testing
|
|---|
| 132 | 4 0 0 Not_testing
|
|---|
| 133 | 5 0 0 Not_testing
|
|---|
| 134 | Selective self-test flags (0x0):
|
|---|
| 135 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 136 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 137 |
|
|---|
| 138 | SCT Status Version: 3
|
|---|
| 139 | SCT Version (vendor specific): 1 (0x0001)
|
|---|
| 140 | Device State: Active (0)
|
|---|
| 141 | Current Temperature: 48 Celsius
|
|---|
| 142 | Power Cycle Min/Max Temperature: ?/48 Celsius
|
|---|
| 143 | Lifetime Min/Max Temperature: ?/ ? Celsius
|
|---|
| 144 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 145 |
|
|---|
| 146 | SCT Temperature History Version: 2
|
|---|
| 147 | Temperature Sampling Period: 1 minute
|
|---|
| 148 | Temperature Logging Interval: 1 minute
|
|---|
| 149 | Min/Max recommended Temperature: -127/127 Celsius
|
|---|
| 150 | Min/Max Temperature Limit: -127/127 Celsius
|
|---|
| 151 | Temperature History Size (Index): 478 (20)
|
|---|
| 152 |
|
|---|
| 153 | Index Estimated Time Temperature Celsius
|
|---|
| 154 | 21 2021-05-01 10:41 ? -
|
|---|
| 155 | ... ..(458 skipped). .. -
|
|---|
| 156 | 2 2021-05-01 18:20 ? -
|
|---|
| 157 | 3 2021-05-01 18:21 48 *****************************
|
|---|
| 158 | 4 2021-05-01 18:22 ? -
|
|---|
| 159 | 5 2021-05-01 18:23 ? -
|
|---|
| 160 | 6 2021-05-01 18:24 ? -
|
|---|
| 161 | 7 2021-05-01 18:25 48 *****************************
|
|---|
| 162 | 8 2021-05-01 18:26 ? -
|
|---|
| 163 | 9 2021-05-01 18:27 48 *****************************
|
|---|
| 164 | 10 2021-05-01 18:28 48 *****************************
|
|---|
| 165 | 11 2021-05-01 18:29 48 *****************************
|
|---|
| 166 | 12 2021-05-01 18:30 ? -
|
|---|
| 167 | 13 2021-05-01 18:31 48 *****************************
|
|---|
| 168 | 14 2021-05-01 18:32 48 *****************************
|
|---|
| 169 | 15 2021-05-01 18:33 48 *****************************
|
|---|
| 170 | 16 2021-05-01 18:34 ? -
|
|---|
| 171 | 17 2021-05-01 18:35 48 *****************************
|
|---|
| 172 | ... ..( 2 skipped). .. *****************************
|
|---|
| 173 | 20 2021-05-01 18:38 48 *****************************
|
|---|
| 174 |
|
|---|
| 175 | SCT Error Recovery Control command not supported
|
|---|
| 176 |
|
|---|
| 177 | Device Statistics (GP Log 0x04)
|
|---|
| 178 | Page Offset Size Value Flags Description
|
|---|
| 179 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
|---|
| 180 | 0x01 0x008 4 6 --- Lifetime Power-On Resets
|
|---|
| 181 | 0x01 0x010 4 0 --- Power-on Hours
|
|---|
| 182 | 0x01 0x018 6 1719 --- Logical Sectors Written
|
|---|
| 183 | 0x01 0x020 6 45 --- Number of Write Commands
|
|---|
| 184 | 0x01 0x028 6 52053 --- Logical Sectors Read
|
|---|
| 185 | 0x01 0x030 6 2030 --- Number of Read Commands
|
|---|
| 186 | 0x01 0x038 6 284100 --- Date and Time TimeStamp
|
|---|
| 187 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|---|
| 188 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
|---|
| 189 | |||_ C monitored condition met
|
|---|
| 190 | ||__ D supports DSN
|
|---|
| 191 | |___ N normalized value
|
|---|
| 192 |
|
|---|
| 193 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 194 |
|
|---|
| 195 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 196 | ID Size Value Description
|
|---|
| 197 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 198 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 199 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 200 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 201 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 202 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 203 | 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 204 | 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 205 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 206 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 207 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 208 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 209 |
|
|---|
