| 1 | smartctl 7.2 2020-12-30 r5155 [armv7l-linux-5.4.0-1028-raspi] (local build)
|
|---|
| 2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Model Family: Western Digital Red
|
|---|
| 6 | Device Model: WDC WD80EFAX-68LHPN0
|
|---|
| 7 | Serial Number: 7SH8AJAD
|
|---|
| 8 | LU WWN Device Id: 5 000cca 252d1e1fd
|
|---|
| 9 | Firmware Version: 83.H0A83
|
|---|
| 10 | User Capacity: 8'001'563'222'016 bytes [8.00 TB]
|
|---|
| 11 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 12 | Rotation Rate: 5400 rpm
|
|---|
| 13 | Form Factor: 3.5 inches
|
|---|
| 14 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 15 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
|
|---|
| 16 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 17 | Local Time is: Fri Apr 16 08:39:15 2021 CEST
|
|---|
| 18 | SMART support is: Available - device has SMART capability.
|
|---|
| 19 | SMART support is: Enabled
|
|---|
| 20 | AAM feature is: Unavailable
|
|---|
| 21 | APM level is: 164 (intermediate level without standby)
|
|---|
| 22 | Rd look-ahead is: Enabled
|
|---|
| 23 | Write cache is: Enabled
|
|---|
| 24 | DSN feature is: Unavailable
|
|---|
| 25 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 26 | Wt Cache Reorder: Unknown
|
|---|
| 27 |
|
|---|
| 28 | === START OF READ SMART DATA SECTION ===
|
|---|
| 29 | SMART Status not supported: Incomplete response, ATA output registers missing
|
|---|
| 30 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 31 | Warning: This result is based on an Attribute check.
|
|---|
| 32 |
|
|---|
| 33 | General SMART Values:
|
|---|
| 34 | Offline data collection status: (0x80) Offline data collection activity
|
|---|
| 35 | was never started.
|
|---|
| 36 | Auto Offline Data Collection: Enabled.
|
|---|
| 37 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 38 | without error or no self-test has ever
|
|---|
| 39 | been run.
|
|---|
| 40 | Total time to complete Offline
|
|---|
| 41 | data collection: ( 93) seconds.
|
|---|
| 42 | Offline data collection
|
|---|
| 43 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 44 | Auto Offline data collection on/off support.
|
|---|
| 45 | Suspend Offline collection upon new
|
|---|
| 46 | command.
|
|---|
| 47 | Offline surface scan supported.
|
|---|
| 48 | Self-test supported.
|
|---|
| 49 | No Conveyance Self-test supported.
|
|---|
| 50 | Selective Self-test supported.
|
|---|
| 51 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 52 | power-saving mode.
|
|---|
| 53 | Supports SMART auto save timer.
|
|---|
| 54 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 55 | General Purpose Logging supported.
|
|---|
| 56 | Short self-test routine
|
|---|
| 57 | recommended polling time: ( 2) minutes.
|
|---|
| 58 | Extended self-test routine
|
|---|
| 59 | recommended polling time: (1014) minutes.
|
|---|
| 60 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 61 | SCT Error Recovery Control supported.
|
|---|
| 62 | SCT Feature Control supported.
|
|---|
| 63 | SCT Data Table supported.
|
|---|
| 64 |
|
|---|
| 65 | SMART Attributes Data Structure revision number: 16
|
|---|
| 66 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 67 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 68 | 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
|
|---|
| 69 | 2 Throughput_Performance --S--- 127 127 054 - 120
|
|---|
| 70 | 3 Spin_Up_Time POS--- 147 147 024 - 454 (Average 441)
|
|---|
| 71 | 4 Start_Stop_Count -O--C- 100 100 000 - 507
|
|---|
| 72 | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
|
|---|
| 73 | 7 Seek_Error_Rate -O-R-- 100 100 067 - 0
|
|---|
| 74 | 8 Seek_Time_Performance --S--- 128 128 020 - 18
|
|---|
| 75 | 9 Power_On_Hours -O--C- 100 100 000 - 1070
|
|---|
| 76 | 10 Spin_Retry_Count -O--C- 100 100 060 - 0
|
|---|
| 77 | 12 Power_Cycle_Count -O--CK 100 100 000 - 502
|
|---|
| 78 | 22 Helium_Level PO---K 100 100 025 - 100
|
|---|
| 79 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 629
|
|---|
| 80 | 193 Load_Cycle_Count -O--C- 100 100 000 - 629
|
|---|
| 81 | 194 Temperature_Celsius -O---- 253 253 000 - 22 (Min/Max 18/60)
|
|---|
| 82 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|---|
| 83 | 197 Current_Pending_Sector -O---K 100 100 000 - 0
|
|---|
| 84 | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
|
|---|
| 85 | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1
|
|---|
| 86 | ||||||_ K auto-keep
|
|---|
| 87 | |||||__ C event count
|
|---|
| 88 | ||||___ R error rate
|
|---|
| 89 | |||____ S speed/performance
|
|---|
| 90 | ||_____ O updated online
|
|---|
| 91 | |______ P prefailure warning
|
|---|
| 92 |
|
|---|
| 93 | General Purpose Log Directory Version 1
|
|---|
| 94 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 95 | Address Access R/W Size Description
|
|---|
| 96 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 97 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 98 | 0x02 SL R/O 1 Comprehensive SMART error log
|
|---|
| 99 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|---|
| 100 | 0x04 GPL R/O 256 Device Statistics log
|
|---|
| 101 | 0x04 SL R/O 255 Device Statistics log
|
|---|
| 102 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 103 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 104 | 0x08 GPL R/O 2 Power Conditions log
|
|---|
| 105 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 106 | 0x0c GPL R/O 5501 Pending Defects log
|
|---|
| 107 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 108 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 109 | 0x12 GPL R/O 1 SATA NCQ Non-Data log
|
|---|
| 110 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
|---|
| 111 | 0x15 GPL R/W 1 Rebuild Assist log
|
|---|
| 112 | 0x21 GPL R/O 1 Write stream error log
|
|---|
| 113 | 0x22 GPL R/O 1 Read stream error log
|
|---|
| 114 | 0x24 GPL R/O 256 Current Device Internal Status Data log
|
|---|
| 115 | 0x25 GPL R/O 256 Saved Device Internal Status Data log
|
|---|
| 116 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 117 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 118 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 119 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 120 |
|
|---|
| 121 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|---|
| 122 | Device Error Count: 1
|
|---|
| 123 | CR = Command Register
|
|---|
| 124 | FEATR = Features Register
|
|---|
| 125 | COUNT = Count (was: Sector Count) Register
|
|---|
| 126 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|---|
| 127 | LH = LBA High (was: Cylinder High) Register ] LBA
|
|---|
| 128 | LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|---|
| 129 | LL = LBA Low (was: Sector Number) Register ]
|
|---|
| 130 | DV = Device (was: Device/Head) Register
|
|---|
| 131 | DC = Device Control Register
|
|---|
| 132 | ER = Error register
|
|---|
| 133 | ST = Status register
|
|---|
| 134 | Powered_Up_Time is measured from power on, and printed as
|
|---|
| 135 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|---|
| 136 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|---|
| 137 |
|
|---|
| 138 | Error 1 [0] occurred at disk power-on lifetime: 1051 hours (43 days + 19 hours)
|
|---|
| 139 | When the command that caused the error occurred, the device was active or idle.
|
|---|
| 140 |
|
|---|
| 141 | After command completion occurred, registers were:
|
|---|
| 142 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|---|
| 143 | -- -- -- == -- == == == -- -- -- -- --
|
|---|
| 144 | 84 -- 41 00 00 00 00 00 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
|
|---|
| 145 |
|
|---|
| 146 | Commands leading to the command that caused the error were:
|
|---|
| 147 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|---|
| 148 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|---|
| 149 | 60 01 00 00 00 00 00 02 27 b6 d0 40 80 00:17:24.781 READ FPDMA QUEUED
|
|---|
| 150 | 60 01 00 00 00 00 00 02 27 b5 d0 40 80 00:16:42.916 READ FPDMA QUEUED
|
|---|
| 151 | 60 01 00 00 00 00 00 02 27 b4 d0 40 80 00:16:42.915 READ FPDMA QUEUED
|
|---|
| 152 | 60 01 00 00 00 00 00 02 27 b3 d0 40 80 00:16:42.914 READ FPDMA QUEUED
|
|---|
| 153 | 60 01 00 00 00 00 00 02 27 b2 d0 40 80 00:16:42.912 READ FPDMA QUEUED
|
|---|
| 154 |
|
|---|
| 155 | SMART Error Log Version: 1
|
|---|
| 156 | ATA Error Count: 1
|
|---|
| 157 | CR = Command Register [HEX]
|
|---|
| 158 | FR = Features Register [HEX]
|
|---|
| 159 | SC = Sector Count Register [HEX]
|
|---|
| 160 | SN = Sector Number Register [HEX]
|
|---|
| 161 | CL = Cylinder Low Register [HEX]
|
|---|
| 162 | CH = Cylinder High Register [HEX]
|
|---|
| 163 | DH = Device/Head Register [HEX]
|
|---|
| 164 | DC = Device Command Register [HEX]
|
|---|
| 165 | ER = Error register [HEX]
|
|---|
| 166 | ST = Status register [HEX]
|
|---|
| 167 | Powered_Up_Time is measured from power on, and printed as
|
|---|
| 168 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|---|
| 169 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|---|
| 170 |
|
|---|
| 171 | Error 1 occurred at disk power-on lifetime: 1051 hours (43 days + 19 hours)
|
|---|
| 172 | When the command that caused the error occurred, the device was active or idle.
|
|---|
| 173 |
|
|---|
| 174 | After command completion occurred, registers were:
|
|---|
| 175 | ER ST SC SN CL CH DH
|
|---|
| 176 | -- -- -- -- -- -- --
|
|---|
| 177 | 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
|
|---|
| 178 |
|
|---|
| 179 | Commands leading to the command that caused the error were:
|
|---|
| 180 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|---|
| 181 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
|---|
| 182 | 60 00 00 d0 b6 27 40 80 00:17:24.781 READ FPDMA QUEUED
|
|---|
| 183 | 60 00 00 d0 b5 27 40 80 00:16:42.916 READ FPDMA QUEUED
|
|---|
| 184 | 60 00 00 d0 b4 27 40 80 00:16:42.915 READ FPDMA QUEUED
|
|---|
| 185 | 60 00 00 d0 b3 27 40 80 00:16:42.914 READ FPDMA QUEUED
|
|---|
| 186 | 60 00 00 d0 b2 27 40 80 00:16:42.912 READ FPDMA QUEUED
|
|---|
| 187 |
|
|---|
| 188 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 189 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 190 | # 1 Extended offline Completed without error 00% 1068 -
|
|---|
| 191 | # 2 Extended offline Completed without error 00% 750 -
|
|---|
| 192 | # 3 Extended offline Completed without error 00% 673 -
|
|---|
| 193 | # 4 Extended offline Completed without error 00% 616 -
|
|---|
| 194 | # 5 Extended offline Completed without error 00% 561 -
|
|---|
| 195 | # 6 Extended offline Completed without error 00% 248 -
|
|---|
| 196 | # 7 Short offline Completed without error 00% 140 -
|
|---|
| 197 | # 8 Short offline Completed without error 00% 140 -
|
|---|
| 198 | # 9 Extended offline Completed without error 00% 25 -
|
|---|
| 199 | #10 Short offline Completed without error 00% 1 -
|
|---|
| 200 |
|
|---|
| 201 | SMART Self-test log structure revision number 1
|
|---|
| 202 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 203 | # 1 Extended offline Completed without error 00% 1068 -
|
|---|
| 204 | # 2 Extended offline Completed without error 00% 750 -
|
|---|
| 205 | # 3 Extended offline Completed without error 00% 673 -
|
|---|
| 206 | # 4 Extended offline Completed without error 00% 616 -
|
|---|
| 207 | # 5 Extended offline Completed without error 00% 561 -
|
|---|
| 208 | # 6 Extended offline Completed without error 00% 248 -
|
|---|
| 209 | # 7 Short offline Completed without error 00% 140 -
|
|---|
| 210 | # 8 Short offline Completed without error 00% 140 -
|
|---|
| 211 | # 9 Extended offline Completed without error 00% 25 -
|
|---|
| 212 | #10 Short offline Completed without error 00% 1 -
|
|---|
| 213 |
|
|---|
| 214 | SMART Selective self-test log data structure revision number 1
|
|---|
| 215 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 216 | 1 0 0 Not_testing
|
|---|
| 217 | 2 0 0 Not_testing
|
|---|
| 218 | 3 0 0 Not_testing
|
|---|
| 219 | 4 0 0 Not_testing
|
|---|
| 220 | 5 0 0 Not_testing
|
|---|
| 221 | Selective self-test flags (0x0):
|
|---|
| 222 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 223 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 224 |
|
|---|
| 225 | SCT Status Version: 3
|
|---|
| 226 | SCT Version (vendor specific): 256 (0x0100)
|
|---|
| 227 | Device State: Active (0)
|
|---|
| 228 | Current Temperature: 22 Celsius
|
|---|
| 229 | Power Cycle Min/Max Temperature: 19/22 Celsius
|
|---|
| 230 | Lifetime Min/Max Temperature: 18/60 Celsius
|
|---|
| 231 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 232 |
|
|---|
| 233 | SCT Temperature History Version: 2
|
|---|
| 234 | Temperature Sampling Period: 1 minute
|
|---|
| 235 | Temperature Logging Interval: 1 minute
|
|---|
| 236 | Min/Max recommended Temperature: 0/65 Celsius
|
|---|
| 237 | Min/Max Temperature Limit: -40/70 Celsius
|
|---|
| 238 | Temperature History Size (Index): 128 (24)
|
|---|
| 239 |
|
|---|
| 240 | Index Estimated Time Temperature Celsius
|
|---|
| 241 | 25 2021-04-16 06:32 42 ***********************
|
|---|
| 242 | ... ..( 42 skipped). .. ***********************
|
|---|
| 243 | 68 2021-04-16 07:15 42 ***********************
|
|---|
| 244 | 69 2021-04-16 07:16 43 ************************
|
|---|
| 245 | 70 2021-04-16 07:17 42 ***********************
|
|---|
| 246 | 71 2021-04-16 07:18 42 ***********************
|
|---|
| 247 | 72 2021-04-16 07:19 43 ************************
|
|---|
| 248 | 73 2021-04-16 07:20 42 ***********************
|
|---|
| 249 | ... ..( 5 skipped). .. ***********************
|
|---|
| 250 | 79 2021-04-16 07:26 42 ***********************
|
|---|
| 251 | 80 2021-04-16 07:27 43 ************************
|
|---|
| 252 | ... ..( 29 skipped). .. ************************
|
|---|
| 253 | 110 2021-04-16 07:57 43 ************************
|
|---|
| 254 | 111 2021-04-16 07:58 42 ***********************
|
|---|
| 255 | ... ..( 32 skipped). .. ***********************
|
|---|
| 256 | 16 2021-04-16 08:31 42 ***********************
|
|---|
| 257 | 17 2021-04-16 08:32 41 **********************
|
|---|
| 258 | 18 2021-04-16 08:33 42 ***********************
|
|---|
| 259 | 19 2021-04-16 08:34 19 -
|
|---|
| 260 | 20 2021-04-16 08:35 20 *
|
|---|
| 261 | 21 2021-04-16 08:36 20 *
|
|---|
| 262 | 22 2021-04-16 08:37 21 **
|
|---|
| 263 | 23 2021-04-16 08:38 22 ***
|
|---|
| 264 | 24 2021-04-16 08:39 42 ***********************
|
|---|
| 265 |
|
|---|
| 266 | SMART WRITE LOG does not return COUNT and LBA_LOW register
|
|---|
| 267 | SCT (Get) Error Recovery Control command failed
|
|---|
| 268 |
|
|---|
| 269 | Device Statistics (GP Log 0x04)
|
|---|
| 270 | Page Offset Size Value Flags Description
|
|---|
| 271 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
|---|
| 272 | 0x01 0x008 4 502 --- Lifetime Power-On Resets
|
|---|
| 273 | 0x01 0x010 4 1070 --- Power-on Hours
|
|---|
| 274 | 0x01 0x018 6 59980588423 --- Logical Sectors Written
|
|---|
| 275 | 0x01 0x020 6 81526864 --- Number of Write Commands
|
|---|
| 276 | 0x01 0x028 6 147579002215 --- Logical Sectors Read
|
|---|
| 277 | 0x01 0x030 6 455383399 --- Number of Read Commands
|
|---|
| 278 | 0x01 0x038 6 3855270500 --- Date and Time TimeStamp
|
|---|
| 279 | 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
|---|
| 280 | 0x03 0x008 4 1029 --- Spindle Motor Power-on Hours
|
|---|
| 281 | 0x03 0x010 4 1029 --- Head Flying Hours
|
|---|
| 282 | 0x03 0x018 4 629 --- Head Load Events
|
|---|
| 283 | 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
|---|
| 284 | 0x03 0x028 4 6 --- Read Recovery Attempts
|
|---|
| 285 | 0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
|---|
| 286 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|---|
| 287 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|---|
| 288 | 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion
|
|---|
| 289 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|---|
| 290 | 0x05 0x008 1 22 --- Current Temperature
|
|---|
| 291 | 0x05 0x010 1 45 N-- Average Short Term Temperature
|
|---|
| 292 | 0x05 0x018 1 40 N-- Average Long Term Temperature
|
|---|
| 293 | 0x05 0x020 1 60 --- Highest Temperature
|
|---|
| 294 | 0x05 0x028 1 18 --- Lowest Temperature
|
|---|
| 295 | 0x05 0x030 1 57 N-- Highest Average Short Term Temperature
|
|---|
| 296 | 0x05 0x038 1 24 N-- Lowest Average Short Term Temperature
|
|---|
| 297 | 0x05 0x040 1 53 N-- Highest Average Long Term Temperature
|
|---|
| 298 | 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
|
|---|
| 299 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
|---|
| 300 | 0x05 0x058 1 65 --- Specified Maximum Operating Temperature
|
|---|
| 301 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
|---|
| 302 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
|---|
| 303 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|---|
| 304 | 0x06 0x008 4 4 --- Number of Hardware Resets
|
|---|
| 305 | 0x06 0x010 4 21 --- Number of ASR Events
|
|---|
| 306 | 0x06 0x018 4 1 --- Number of Interface CRC Errors
|
|---|
| 307 | 0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
|
|---|
| 308 | |||_ C monitored condition met
|
|---|
| 309 | ||__ D supports DSN
|
|---|
| 310 | |___ N normalized value
|
|---|
| 311 |
|
|---|
| 312 | Pending Defects log (GP Log 0x0c)
|
|---|
| 313 | No Defects Logged
|
|---|
| 314 |
|
|---|
| 315 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 316 | ID Size Value Description
|
|---|
| 317 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 318 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 319 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 320 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 321 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 322 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 323 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 324 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 325 | 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 326 | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 327 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 328 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 329 |
|
|---|
