| 1 | smartctl 7.1 2020-09-20 r5086 [x86_64-linux-3.10.0-1160.15.2.el7.x86_64] (local build)
|
|---|
| 2 | Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Model Family: Samsung based SSDs
|
|---|
| 6 | Device Model: Samsung SSD 883 DCT 3.84TB
|
|---|
| 7 | Serial Number: S482NB0M700255M
|
|---|
| 8 | LU WWN Device Id: 5 002538 e4975daca
|
|---|
| 9 | Firmware Version: HXT7404Q
|
|---|
| 10 | User Capacity: 3,840,755,982,336 bytes [3.84 TB]
|
|---|
| 11 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 12 | Rotation Rate: Solid State Device
|
|---|
| 13 | Form Factor: 2.5 inches
|
|---|
| 14 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 15 | ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
|
|---|
| 16 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 17 | Local Time is: Mon Feb 22 20:09:40 2021 UTC
|
|---|
| 18 | SMART support is: Available - device has SMART capability.
|
|---|
| 19 | SMART support is: Enabled
|
|---|
| 20 | AAM feature is: Unavailable
|
|---|
| 21 | APM feature is: Unavailable
|
|---|
| 22 | Rd look-ahead is: Enabled
|
|---|
| 23 | Write cache is: Enabled
|
|---|
| 24 | DSN feature is: Unavailable
|
|---|
| 25 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 26 | Write SCT (Get) Feature Control Command failed: ATA return descriptor not supported by controller firmware
|
|---|
| 27 | Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|---|
| 28 |
|
|---|
| 29 | === START OF READ SMART DATA SECTION ===
|
|---|
| 30 | SMART Status not supported: ATA return descriptor not supported by controller firmware
|
|---|
| 31 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 32 | Warning: This result is based on an Attribute check.
|
|---|
| 33 |
|
|---|
| 34 | General SMART Values:
|
|---|
| 35 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 36 | was never started.
|
|---|
| 37 | Auto Offline Data Collection: Disabled.
|
|---|
| 38 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 39 | without error or no self-test has ever
|
|---|
| 40 | been run.
|
|---|
| 41 | Total time to complete Offline
|
|---|
| 42 | data collection: ( 0) seconds.
|
|---|
| 43 | Offline data collection
|
|---|
| 44 | capabilities: (0x53) SMART execute Offline immediate.
|
|---|
| 45 | Auto Offline data collection on/off support.
|
|---|
| 46 | Suspend Offline collection upon new
|
|---|
| 47 | command.
|
|---|
| 48 | No Offline surface scan supported.
|
|---|
| 49 | Self-test supported.
|
|---|
| 50 | No Conveyance Self-test supported.
|
|---|
| 51 | Selective Self-test supported.
|
|---|
| 52 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 53 | power-saving mode.
|
|---|
| 54 | Supports SMART auto save timer.
|
|---|
| 55 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 56 | General Purpose Logging supported.
|
|---|
| 57 | Short self-test routine
|
|---|
| 58 | recommended polling time: ( 2) minutes.
|
|---|
| 59 | Extended self-test routine
|
|---|
| 60 | recommended polling time: ( 200) minutes.
|
|---|
| 61 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 62 | SCT Error Recovery Control supported.
|
|---|
| 63 | SCT Feature Control supported.
|
|---|
| 64 | SCT Data Table supported.
|
|---|
| 65 |
|
|---|
| 66 | SMART Attributes Data Structure revision number: 1
|
|---|
| 67 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 68 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 69 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|---|
| 70 | 9 Power_On_Hours -O--CK 097 097 000 - 12193
|
|---|
| 71 | 12 Power_Cycle_Count -O--CK 099 099 000 - 7
|
|---|
| 72 | 177 Wear_Leveling_Count PO--C- 099 099 005 - 21
|
|---|
| 73 | 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
|
|---|
| 74 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 11655
|
|---|
| 75 | 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
|
|---|
| 76 | 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
|
|---|
| 77 | 183 Runtime_Bad_Block PO--C- 100 100 010 - 0
|
|---|
| 78 | 184 End-to-End_Error PO--CK 100 100 097 - 0
|
|---|
| 79 | 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
|
|---|
| 80 | 190 Airflow_Temperature_Cel -O--CK 077 062 000 - 23
|
|---|
| 81 | 194 Temperature_Celsius -O---K 077 060 000 - 23 (Min/Max 20/37)
|
|---|
| 82 | 195 ECC_Error_Rate -O-RC- 200 200 000 - 0
|
|---|
| 83 | 197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
|---|
| 84 | 199 CRC_Error_Count -OSRCK 100 100 000 - 0
|
|---|
| 85 | 202 Exception_Mode_Status PO--CK 100 100 010 - 0
|
|---|
| 86 | 235 POR_Recovery_Count -O--C- 099 099 000 - 3
|
|---|
| 87 | 241 Total_LBAs_Written -O--CK 099 099 000 - 105750813147
|
|---|
| 88 | 242 Total_LBAs_Read -O--CK 099 099 000 - 114395078225
|
|---|
| 89 | 243 SATA_Downshift_Ct -O--CK 100 100 000 - 0
|
|---|
| 90 | 244 Thermal_Throttle_St -O--CK 100 100 000 - 0
|
|---|
| 91 | 245 Timed_Workld_Media_Wear -O--CK 100 100 000 - 65535
|
|---|
| 92 | 246 Timed_Workld_RdWr_Ratio -O--CK 100 100 000 - 65535
|
|---|
| 93 | 247 Timed_Workld_Timer -O--CK 100 100 000 - 65535
|
|---|
| 94 | 251 NAND_Writes -O--CK 100 100 000 - 184868061952
|
|---|
| 95 | ||||||_ K auto-keep
|
|---|
| 96 | |||||__ C event count
|
|---|
| 97 | ||||___ R error rate
|
|---|
| 98 | |||____ S speed/performance
|
|---|
| 99 | ||_____ O updated online
|
|---|
| 100 | |______ P prefailure warning
|
|---|
| 101 |
|
|---|
| 102 | General Purpose Log Directory Version 1
|
|---|
| 103 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 104 | Address Access R/W Size Description
|
|---|
| 105 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 106 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 107 | 0x02 SL R/O 1 Comprehensive SMART error log
|
|---|
| 108 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|---|
| 109 | 0x04 GPL,SL R/O 8 Device Statistics log
|
|---|
| 110 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 111 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 112 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 113 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 114 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 115 | 0x12 GPL R/O 1 SATA NCQ Non-Data log
|
|---|
| 116 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
|---|
| 117 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 118 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 119 | 0xa5 SL VS 16 Device vendor specific log
|
|---|
| 120 | 0xce SL VS 16 Device vendor specific log
|
|---|
| 121 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 122 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 123 |
|
|---|
| 124 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|---|
| 125 | No Errors Logged
|
|---|
| 126 |
|
|---|
| 127 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 128 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 129 | # 1 Short offline Completed without error 00% 12193 -
|
|---|
| 130 |
|
|---|
| 131 | SMART Selective self-test log data structure revision number 1
|
|---|
| 132 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 133 | 1 0 0 Not_testing
|
|---|
| 134 | 2 0 0 Not_testing
|
|---|
| 135 | 3 0 0 Not_testing
|
|---|
| 136 | 4 0 0 Not_testing
|
|---|
| 137 | 5 0 0 Not_testing
|
|---|
| 138 | Selective self-test flags (0x0):
|
|---|
| 139 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 140 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 141 |
|
|---|
| 142 | SCT Status Version: 3
|
|---|
| 143 | SCT Version (vendor specific): 256 (0x0100)
|
|---|
| 144 | Device State: Active (0)
|
|---|
| 145 | Current Temperature: 23 Celsius
|
|---|
| 146 | Power Cycle Min/Max Temperature: 20/24 Celsius
|
|---|
| 147 | Lifetime Min/Max Temperature: 20/37 Celsius
|
|---|
| 148 | Specified Max Operating Temperature: 70 Celsius
|
|---|
| 149 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 150 |
|
|---|
| 151 | Write SCT Data Table failed: SMART WRITE LOG SECTOR may cause problems, try with -T permissive to force
|
|---|
| 152 | Read SCT Temperature History failed
|
|---|
| 153 |
|
|---|
| 154 | Write SCT (Get) Error Recovery Control Command failed: ATA return descriptor not supported by controller firmware
|
|---|
| 155 | SCT (Get) Error Recovery Control command failed
|
|---|
| 156 |
|
|---|
| 157 | Device Statistics (GP Log 0x04)
|
|---|
| 158 | Page Offset Size Value Flags Description
|
|---|
| 159 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
|---|
| 160 | 0x01 0x008 4 7 --- Lifetime Power-On Resets
|
|---|
| 161 | 0x01 0x010 4 12193 --- Power-on Hours
|
|---|
| 162 | 0x01 0x018 6 105750813147 --- Logical Sectors Written
|
|---|
| 163 | 0x01 0x020 6 2982071409 --- Number of Write Commands
|
|---|
| 164 | 0x01 0x028 6 114395078225 --- Logical Sectors Read
|
|---|
| 165 | 0x01 0x030 6 1149649011 --- Number of Read Commands
|
|---|
| 166 | 0x01 0x038 6 2582000 --- Date and Time TimeStamp
|
|---|
| 167 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|---|
| 168 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|---|
| 169 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
|---|
| 170 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|---|
| 171 | 0x05 0x008 1 23 --- Current Temperature
|
|---|
| 172 | 0x05 0x020 1 37 --- Highest Temperature
|
|---|
| 173 | 0x05 0x028 1 20 --- Lowest Temperature
|
|---|
| 174 | 0x05 0x058 1 70 --- Specified Maximum Operating Temperature
|
|---|
| 175 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|---|
| 176 | 0x06 0x008 4 32 --- Number of Hardware Resets
|
|---|
| 177 | 0x06 0x010 4 0 --- Number of ASR Events
|
|---|
| 178 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|---|
| 179 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|---|
| 180 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
|---|
| 181 | |||_ C monitored condition met
|
|---|
| 182 | ||__ D supports DSN
|
|---|
| 183 | |___ N normalized value
|
|---|
| 184 |
|
|---|
| 185 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 186 |
|
|---|
| 187 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 188 | ID Size Value Description
|
|---|
| 189 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 190 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 191 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 192 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 193 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 194 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 195 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 196 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 197 | 0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 198 | 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 199 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 200 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 201 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 202 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 203 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 204 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 205 |
|
|---|
