| 1 | smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-0.bpo.3-amd64] (local build)
|
|---|
| 2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: WDC WDS400T1R0A-68A4W0
|
|---|
| 6 | Serial Number: xxxxxxxxxxxx
|
|---|
| 7 | LU WWN Device Id: x xxxxxx xxxxxxxxx
|
|---|
| 8 | Firmware Version: 411000WR
|
|---|
| 9 | User Capacity: 4 000 787 030 016 bytes [4,00 TB]
|
|---|
| 10 | Sector Size: 512 bytes logical/physical
|
|---|
| 11 | Rotation Rate: Solid State Device
|
|---|
| 12 | Form Factor: 2.5 inches
|
|---|
| 13 | TRIM Command: Available, deterministic, zeroed
|
|---|
| 14 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 15 | ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
|
|---|
| 16 | SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 17 | Local Time is: Sun Feb 21 03:39:22 2021 CET
|
|---|
| 18 | SMART support is: Available - device has SMART capability.
|
|---|
| 19 | SMART support is: Enabled
|
|---|
| 20 |
|
|---|
| 21 | === START OF READ SMART DATA SECTION ===
|
|---|
| 22 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 23 |
|
|---|
| 24 | General SMART Values:
|
|---|
| 25 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 26 | was never started.
|
|---|
| 27 | Auto Offline Data Collection: Disabled.
|
|---|
| 28 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 29 | without error or no self-test has ever
|
|---|
| 30 | been run.
|
|---|
| 31 | Total time to complete Offline
|
|---|
| 32 | data collection: ( 0) seconds.
|
|---|
| 33 | Offline data collection
|
|---|
| 34 | capabilities: (0x11) SMART execute Offline immediate.
|
|---|
| 35 | No Auto Offline data collection support.
|
|---|
| 36 | Suspend Offline collection upon new
|
|---|
| 37 | command.
|
|---|
| 38 | No Offline surface scan supported.
|
|---|
| 39 | Self-test supported.
|
|---|
| 40 | No Conveyance Self-test supported.
|
|---|
| 41 | No Selective Self-test supported.
|
|---|
| 42 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 43 | power-saving mode.
|
|---|
| 44 | Supports SMART auto save timer.
|
|---|
| 45 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 46 | General Purpose Logging supported.
|
|---|
| 47 | Short self-test routine
|
|---|
| 48 | recommended polling time: ( 2) minutes.
|
|---|
| 49 | Extended self-test routine
|
|---|
| 50 | recommended polling time: ( 10) minutes.
|
|---|
| 51 |
|
|---|
| 52 | SMART Attributes Data Structure revision number: 4
|
|---|
| 53 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 54 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 55 | 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0
|
|---|
| 56 | 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 5056
|
|---|
| 57 | 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 11
|
|---|
| 58 | 165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 2424855
|
|---|
| 59 | 166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
|
|---|
| 60 | 167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 257
|
|---|
| 61 | 168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1
|
|---|
| 62 | 169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 3670
|
|---|
| 63 | 170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
|
|---|
| 64 | 171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
|
|---|
| 65 | 172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
|
|---|
| 66 | 173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
|
|---|
| 67 | 174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 6
|
|---|
| 68 | 184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
|
|---|
| 69 | 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0
|
|---|
| 70 | 188 Command_Timeout 0x0032 100 100 --- Old_age Always - 72
|
|---|
| 71 | 194 Temperature_Celsius 0x0022 078 041 --- Old_age Always - 22 (Min/Max 19/41)
|
|---|
| 72 | 199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0
|
|---|
| 73 | 230 Unknown_SSD_Attribute 0x0032 001 001 --- Old_age Always - 12884901891
|
|---|
| 74 | 232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100
|
|---|
| 75 | 233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 1374
|
|---|
| 76 | 234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1441
|
|---|
| 77 | 241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 1362
|
|---|
| 78 | 242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 802
|
|---|
| 79 | 244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0
|
|---|
| 80 |
|
|---|
| 81 | SMART Error Log Version: 1
|
|---|
| 82 | No Errors Logged
|
|---|
| 83 |
|
|---|
| 84 | SMART Self-test log structure revision number 1
|
|---|
| 85 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 86 |
|
|---|
| 87 | Selective Self-tests/Logging not supported
|
|---|
| 88 |
|
|---|
