1 | smartctl 7.2 2020-12-30 r5155 [armv7l-linux-5.4.0-1028-raspi] (local build)
|
---|
2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: SAMSUNG SpinPoint T166
|
---|
6 | Device Model: SAMSUNG HD501LJ
|
---|
7 | Serial Number: S0MUJ1FPB87260
|
---|
8 | LU WWN Device Id: 5 0000f0 01bb87260
|
---|
9 | Firmware Version: CR100-12
|
---|
10 | User Capacity: 500'107'862'016 bytes [500 GB]
|
---|
11 | Sector Size: 512 bytes logical/physical
|
---|
12 | Device is: In smartctl database [for details use: -P show]
|
---|
13 | ATA Version is: ATA8-ACS T13/1699-D revision 3b
|
---|
14 | SATA Version is: SATA 2.5, 3.0 Gb/s
|
---|
15 | Local Time is: Thu Feb 11 10:39:38 2021 CET
|
---|
16 | SMART support is: Available - device has SMART capability.
|
---|
17 | SMART support is: Enabled
|
---|
18 | AAM feature is: Disabled
|
---|
19 | APM feature is: Unavailable
|
---|
20 | Rd look-ahead is: Enabled
|
---|
21 | Write cache is: Enabled
|
---|
22 | DSN feature is: Unavailable
|
---|
23 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
24 | Wt Cache Reorder: Unknown
|
---|
25 |
|
---|
26 | === START OF READ SMART DATA SECTION ===
|
---|
27 | SMART Status not supported: Incomplete response, ATA output registers missing
|
---|
28 | SMART overall-health self-assessment test result: PASSED
|
---|
29 | Warning: This result is based on an Attribute check.
|
---|
30 |
|
---|
31 | General SMART Values:
|
---|
32 | Offline data collection status: (0x00) Offline data collection activity
|
---|
33 | was never started.
|
---|
34 | Auto Offline Data Collection: Disabled.
|
---|
35 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
36 | without error or no self-test has ever
|
---|
37 | been run.
|
---|
38 | Total time to complete Offline
|
---|
39 | data collection: ( 9069) seconds.
|
---|
40 | Offline data collection
|
---|
41 | capabilities: (0x5b) SMART execute Offline immediate.
|
---|
42 | Auto Offline data collection on/off support.
|
---|
43 | Suspend Offline collection upon new
|
---|
44 | command.
|
---|
45 | Offline surface scan supported.
|
---|
46 | Self-test supported.
|
---|
47 | No Conveyance Self-test supported.
|
---|
48 | Selective Self-test supported.
|
---|
49 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
50 | power-saving mode.
|
---|
51 | Supports SMART auto save timer.
|
---|
52 | Error logging capability: (0x01) Error logging supported.
|
---|
53 | General Purpose Logging supported.
|
---|
54 | Short self-test routine
|
---|
55 | recommended polling time: ( 2) minutes.
|
---|
56 | Extended self-test routine
|
---|
57 | recommended polling time: ( 155) minutes.
|
---|
58 | SCT capabilities: (0x003f) SCT Status supported.
|
---|
59 | SCT Error Recovery Control supported.
|
---|
60 | SCT Feature Control supported.
|
---|
61 | SCT Data Table supported.
|
---|
62 |
|
---|
63 | SMART Attributes Data Structure revision number: 16
|
---|
64 | Vendor Specific SMART Attributes with Thresholds:
|
---|
65 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
66 | 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
|
---|
67 | 3 Spin_Up_Time POS--- 100 100 015 - 7552
|
---|
68 | 4 Start_Stop_Count -O--CK 084 084 000 - 17112
|
---|
69 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 1
|
---|
70 | 7 Seek_Error_Rate POSR-- 253 253 051 - 0
|
---|
71 | 8 Seek_Time_Performance P-S--K 253 253 015 - 0
|
---|
72 | 9 Power_On_Hours -O--CK 100 100 000 - 15684
|
---|
73 | 10 Spin_Retry_Count PO--CK 253 253 051 - 0
|
---|
74 | 11 Calibration_Retry_Count -O--C- 253 253 000 - 0
|
---|
75 | 12 Power_Cycle_Count -O--CK 096 096 000 - 4766
|
---|
76 | 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 3071758
|
---|
77 | 187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
---|
78 | 188 Command_Timeout -O--CK 253 253 000 - 0
|
---|
79 | 190 Airflow_Temperature_Cel -O---K 060 049 000 - 40
|
---|
80 | 194 Temperature_Celsius -O---K 118 082 000 - 40
|
---|
81 | 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 3071758
|
---|
82 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 1
|
---|
83 | 197 Total_Pending_Sectors -O--C- 253 253 000 - 0
|
---|
84 | 198 Offline_Uncorrectable ----CK 253 253 000 - 0
|
---|
85 | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
---|
86 | 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
|
---|
87 | 201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0
|
---|
88 | 202 Data_Address_Mark_Errs -O--CK 100 100 000 - 34
|
---|
89 | ||||||_ K auto-keep
|
---|
90 | |||||__ C event count
|
---|
91 | ||||___ R error rate
|
---|
92 | |||____ S speed/performance
|
---|
93 | ||_____ O updated online
|
---|
94 | |______ P prefailure warning
|
---|
95 |
|
---|
96 | General Purpose Log Directory Version 1
|
---|
97 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
98 | Address Access R/W Size Description
|
---|
99 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
100 | 0x01 SL R/O 1 Summary SMART error log
|
---|
101 | 0x02 SL R/O 2 Comprehensive SMART error log
|
---|
102 | 0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
---|
103 | 0x06 SL R/O 1 SMART self-test log
|
---|
104 | 0x09 GPL,SL R/W 1 Selective self-test log
|
---|
105 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
106 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
107 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
108 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
109 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
110 |
|
---|
111 | SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
---|
112 | No Errors Logged
|
---|
113 |
|
---|
114 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
---|
115 |
|
---|
116 | SMART Self-test log structure revision number 1
|
---|
117 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
118 | # 1 Extended offline Completed without error 00% 14018 -
|
---|
119 | # 2 Short offline Completed without error 00% 13932 -
|
---|
120 | # 3 Extended offline Completed without error 00% 13911 -
|
---|
121 | # 4 Short offline Completed without error 00% 9 -
|
---|
122 |
|
---|
123 | SMART Selective self-test log data structure revision number 0
|
---|
124 | Note: revision number not 1 implies that no selective self-test has ever been run
|
---|
125 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
126 | 1 0 0 Not_testing
|
---|
127 | 2 0 0 Not_testing
|
---|
128 | 3 0 0 Not_testing
|
---|
129 | 4 0 0 Not_testing
|
---|
130 | 5 0 0 Not_testing
|
---|
131 | Selective self-test flags (0x0):
|
---|
132 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
133 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
134 |
|
---|
135 | SCT Status Version: 2
|
---|
136 | SCT Version (vendor specific): 256 (0x0100)
|
---|
137 | Device State: Active (0)
|
---|
138 | Current Temperature: 40 Celsius
|
---|
139 | Power Cycle Min/Max Temperature: 14/41 Celsius
|
---|
140 | Lifetime Min/Max Temperature: 6/52 Celsius
|
---|
141 | Under/Over Temperature Limit Count: 0/0
|
---|
142 |
|
---|
143 | SCT Temperature History Version: 2
|
---|
144 | Temperature Sampling Period: 1 minute
|
---|
145 | Temperature Logging Interval: 1 minute
|
---|
146 | Min/Max recommended Temperature: -4/72 Celsius
|
---|
147 | Min/Max Temperature Limit: -9/77 Celsius
|
---|
148 | Temperature History Size (Index): 128 (66)
|
---|
149 |
|
---|
150 | Index Estimated Time Temperature Celsius
|
---|
151 | 67 2021-02-11 08:32 20 *
|
---|
152 | 68 2021-02-11 08:33 20 *
|
---|
153 | 69 2021-02-11 08:34 21 **
|
---|
154 | 70 2021-02-11 08:35 22 ***
|
---|
155 | 71 2021-02-11 08:36 23 ****
|
---|
156 | 72 2021-02-11 08:37 23 ****
|
---|
157 | 73 2021-02-11 08:38 24 *****
|
---|
158 | 74 2021-02-11 08:39 24 *****
|
---|
159 | 75 2021-02-11 08:40 25 ******
|
---|
160 | 76 2021-02-11 08:41 26 *******
|
---|
161 | 77 2021-02-11 08:42 26 *******
|
---|
162 | 78 2021-02-11 08:43 27 ********
|
---|
163 | 79 2021-02-11 08:44 27 ********
|
---|
164 | 80 2021-02-11 08:45 28 *********
|
---|
165 | 81 2021-02-11 08:46 28 *********
|
---|
166 | 82 2021-02-11 08:47 28 *********
|
---|
167 | 83 2021-02-11 08:48 29 **********
|
---|
168 | 84 2021-02-11 08:49 29 **********
|
---|
169 | 85 2021-02-11 08:50 29 **********
|
---|
170 | 86 2021-02-11 08:51 30 ***********
|
---|
171 | 87 2021-02-11 08:52 30 ***********
|
---|
172 | 88 2021-02-11 08:53 30 ***********
|
---|
173 | 89 2021-02-11 08:54 31 ************
|
---|
174 | 90 2021-02-11 08:55 31 ************
|
---|
175 | 91 2021-02-11 08:56 31 ************
|
---|
176 | 92 2021-02-11 08:57 32 *************
|
---|
177 | ... ..( 2 skipped). .. *************
|
---|
178 | 95 2021-02-11 09:00 32 *************
|
---|
179 | 96 2021-02-11 09:01 33 **************
|
---|
180 | 97 2021-02-11 09:02 33 **************
|
---|
181 | 98 2021-02-11 09:03 33 **************
|
---|
182 | 99 2021-02-11 09:04 35 ****************
|
---|
183 | ... ..( 4 skipped). .. ****************
|
---|
184 | 104 2021-02-11 09:09 35 ****************
|
---|
185 | 105 2021-02-11 09:10 36 *****************
|
---|
186 | ... ..( 4 skipped). .. *****************
|
---|
187 | 110 2021-02-11 09:15 36 *****************
|
---|
188 | 111 2021-02-11 09:16 37 ******************
|
---|
189 | ... ..( 7 skipped). .. ******************
|
---|
190 | 119 2021-02-11 09:24 37 ******************
|
---|
191 | 120 2021-02-11 09:25 38 *******************
|
---|
192 | ... ..( 9 skipped). .. *******************
|
---|
193 | 2 2021-02-11 09:35 38 *******************
|
---|
194 | 3 2021-02-11 09:36 39 ********************
|
---|
195 | ... ..( 39 skipped). .. ********************
|
---|
196 | 43 2021-02-11 10:16 39 ********************
|
---|
197 | 44 2021-02-11 10:17 40 *********************
|
---|
198 | ... ..( 17 skipped). .. *********************
|
---|
199 | 62 2021-02-11 10:35 40 *********************
|
---|
200 | 63 2021-02-11 10:36 41 **********************
|
---|
201 | 64 2021-02-11 10:37 40 *********************
|
---|
202 | 65 2021-02-11 10:38 40 *********************
|
---|
203 | 66 2021-02-11 10:39 19 -
|
---|
204 |
|
---|
205 | SMART WRITE LOG does not return COUNT and LBA_LOW register
|
---|
206 | SCT (Get) Error Recovery Control command failed
|
---|
207 |
|
---|
208 | Device Statistics (GP/SMART Log 0x04) not supported
|
---|
209 |
|
---|
210 | Pending Defects log (GP Log 0x0c) not supported
|
---|
211 |
|
---|
212 | SATA Phy Event Counters (GP Log 0x11)
|
---|
213 | ID Size Value Description
|
---|
214 | 0x0001 2 0 Command failed due to ICRC error
|
---|
215 | 0x0002 2 0 R_ERR response for data FIS
|
---|
216 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
217 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
218 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
219 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
220 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
221 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
222 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
223 | 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
---|
224 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
225 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
226 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
227 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
228 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
229 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
230 | 0x8001 2 0 Vendor specific
|
---|
231 |
|
---|