Ticket #1431: smartctl-IBM-Seagate-ST33000650NS.txt

File smartctl-IBM-Seagate-ST33000650NS.txt, 19.4 KB (added by AVeek, 3 years ago)
Line 
1smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build)
2Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: ST33000650NS 81Y9799 81Y3865IBM
6Firmware Version: BB3A
7User Capacity: 3,000,592,982,016 bytes [3.00 TB]
8Sector Size: 512 bytes logical/physical
9Rotation Rate: 7200 rpm
10Form Factor: 3.5 inches
11Device is: Not in smartctl database [for details use: -P showall]
12ATA Version is: ATA8-ACS T13/1699-D revision 4
13SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
14Local Time is: Sat Jan 23 12:14:03 2021 CET
15SMART support is: Available - device has SMART capability.
16SMART support is: Enabled
17AAM feature is: Unavailable
18APM feature is: Unavailable
19Rd look-ahead is: Enabled
20Write cache is: Enabled
21DSN feature is: Unavailable
22ATA Security is: Disabled, NOT FROZEN [SEC1]
23Wt Cache Reorder: Enabled
24
25=== START OF READ SMART DATA SECTION ===
26SMART overall-health self-assessment test result: PASSED
27
28General SMART Values:
29Offline data collection status: (0x82) Offline data collection activity
30 was completed without error.
31 Auto Offline Data Collection: Enabled.
32Self-test execution status: ( 0) The previous self-test routine completed
33 without error or no self-test has ever
34 been run.
35Total time to complete Offline
36data collection: ( 600) seconds.
37Offline data collection
38capabilities: (0x7b) SMART execute Offline immediate.
39 Auto Offline data collection on/off support.
40 Suspend Offline collection upon new
41 command.
42 Offline surface scan supported.
43 Self-test supported.
44 Conveyance Self-test supported.
45 Selective Self-test supported.
46SMART capabilities: (0x0003) Saves SMART data before entering
47 power-saving mode.
48 Supports SMART auto save timer.
49Error logging capability: (0x01) Error logging supported.
50 General Purpose Logging supported.
51Short self-test routine
52recommended polling time: ( 1) minutes.
53Extended self-test routine
54recommended polling time: ( 449) minutes.
55Conveyance self-test routine
56recommended polling time: ( 2) minutes.
57SCT capabilities: (0x10bd) SCT Status supported.
58 SCT Error Recovery Control supported.
59 SCT Feature Control supported.
60 SCT Data Table supported.
61
62SMART Attributes Data Structure revision number: 10
63Vendor Specific SMART Attributes with Thresholds:
64ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
65 1 Raw_Read_Error_Rate POSR-- 083 063 044 - 215501638
66 3 Spin_Up_Time PO---- 092 091 000 - 0
67 4 Start_Stop_Count -O--CK 100 100 020 - 107
68 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
69 7 Seek_Error_Rate POSR-- 082 060 030 - 4491419574
70 9 Power_On_Hours -O--CK 025 025 000 - 66216
71 10 Spin_Retry_Count PO--C- 100 100 097 - 0
72 12 Power_Cycle_Count -O--CK 100 100 020 - 107
73184 End-to-End_Error -O--CK 100 100 099 - 0
74187 Reported_Uncorrect -O--CK 087 087 000 - 13
75188 Command_Timeout -O--CK 100 099 000 - 4295032833
76189 High_Fly_Writes -O-RCK 100 100 000 - 0
77190 Airflow_Temperature_Cel -O---K 067 046 045 - 33 (Min/Max 30/35)
78191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
79192 Power-Off_Retract_Count -O--CK 100 100 000 - 105
80193 Load_Cycle_Count -O--CK 099 099 000 - 2845
81194 Temperature_Celsius -O---K 033 054 000 - 33 (0 24 0 0 0)
82195 Hardware_ECC_Recovered -O-RC- 023 004 000 - 215501638
83197 Current_Pending_Sector -O--C- 100 100 000 - 0
84198 Offline_Uncorrectable ----C- 100 100 000 - 0
85199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
86 ||||||_ K auto-keep
87 |||||__ C event count
88 ||||___ R error rate
89 |||____ S speed/performance
90 ||_____ O updated online
91 |______ P prefailure warning
92
93General Purpose Log Directory Version 1
94SMART Log Directory Version 1 [multi-sector log support]
95Address Access R/W Size Description
960x00 GPL,SL R/O 1 Log Directory
970x01 SL R/O 1 Summary SMART error log
980x02 SL R/O 5 Comprehensive SMART error log
990x03 GPL R/O 5 Ext. Comprehensive SMART error log
1000x06 SL R/O 1 SMART self-test log
1010x07 GPL R/O 1 Extended self-test log
1020x08 GPL,SL R/O 2 Power Conditions log
1030x09 SL R/W 1 Selective self-test log
1040x10 GPL R/O 1 NCQ Command Error log
1050x11 GPL R/O 1 SATA Phy Event Counters log
1060x21 GPL R/O 1 Write stream error log
1070x22 GPL R/O 1 Read stream error log
1080x80-0x9f GPL,SL R/W 16 Host vendor specific log
1090xa1 GPL,SL VS 20 Device vendor specific log
1100xa2 GPL VS 4496 Device vendor specific log
1110xa8 GPL,SL VS 129 Device vendor specific log
1120xa9 GPL,SL VS 1 Device vendor specific log
1130xb0 GPL,SL VS 1 Device vendor specific log
1140xbd GPL VS 252 Device vendor specific log
1150xbe-0xbf GPL VS 65535 Device vendor specific log
1160xe0 GPL,SL R/W 1 SCT Command/Status
1170xe1 GPL,SL R/W 1 SCT Data Transfer
118
119SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
120Device Error Count: 23 (device log contains only the most recent 20 errors)
121 CR = Command Register
122 FEATR = Features Register
123 COUNT = Count (was: Sector Count) Register
124 LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
125 LH = LBA High (was: Cylinder High) Register ] LBA
126 LM = LBA Mid (was: Cylinder Low) Register ] Register
127 LL = LBA Low (was: Sector Number) Register ]
128 DV = Device (was: Device/Head) Register
129 DC = Device Control Register
130 ER = Error register
131 ST = Status register
132Powered_Up_Time is measured from power on, and printed as
133DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
134SS=sec, and sss=millisec. It "wraps" after 49.710 days.
135
136Error 23 [2] occurred at disk power-on lifetime: 57246 hours (2385 days + 6 hours)
137 When the command that caused the error occurred, the device was active or idle.
138
139 After command completion occurred, registers were:
140 ER -- ST COUNT LBA_48 LH LM LL DV DC
141 -- -- -- == -- == == == -- -- -- -- --
142 40 -- 51 00 00 00 00 6c 24 18 14 00 00 Error: UNC at LBA = 0x6c241814 = 1814304788
143
144 Commands leading to the command that caused the error were:
145 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
146 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
147 60 00 00 01 00 00 00 6c 23 e3 00 40 00 41d+20:04:47.822 READ FPDMA QUEUED
148 60 00 00 01 00 00 00 6c 23 e2 00 40 00 41d+20:04:47.814 READ FPDMA QUEUED
149 60 00 00 01 00 00 00 6c 23 e1 00 40 00 41d+20:04:47.813 READ FPDMA QUEUED
150 42 00 00 01 00 00 00 6c 23 e0 00 40 00 41d+20:04:47.804 READ VERIFY SECTOR(S) EXT
151 61 00 00 01 00 00 00 6c 23 e0 00 40 00 41d+20:04:47.680 WRITE FPDMA QUEUED
152
153Error 22 [1] occurred at disk power-on lifetime: 57246 hours (2385 days + 6 hours)
154 When the command that caused the error occurred, the device was active or idle.
155
156 After command completion occurred, registers were:
157 ER -- ST COUNT LBA_48 LH LM LL DV DC
158 -- -- -- == -- == == == -- -- -- -- --
159 40 -- 51 00 00 00 00 6c 23 e0 0a 00 00 Error: UNC at LBA = 0x6c23e00a = 1814290442
160
161 Commands leading to the command that caused the error were:
162 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
163 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
164 60 00 00 01 00 00 00 6c 18 d5 00 40 00 41d+20:04:42.288 READ FPDMA QUEUED
165 60 00 00 01 00 00 00 6c 18 d4 00 40 00 41d+20:04:42.275 READ FPDMA QUEUED
166 60 00 00 01 00 00 00 6c 18 d3 00 40 00 41d+20:04:42.274 READ FPDMA QUEUED
167 60 00 00 01 00 00 00 6c 18 d2 00 40 00 41d+20:04:42.273 READ FPDMA QUEUED
168 60 00 00 01 00 00 00 63 cc 47 00 40 00 41d+20:04:42.191 READ FPDMA QUEUED
169
170Error 21 [0] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours)
171 When the command that caused the error occurred, the device was active or idle.
172
173 After command completion occurred, registers were:
174 ER -- ST COUNT LBA_48 LH LM LL DV DC
175 -- -- -- == -- == == == -- -- -- -- --
176 40 -- 51 00 00 00 00 6c 24 3d 0b 00 00 Error: UNC at LBA = 0x6c243d0b = 1814314251
177
178 Commands leading to the command that caused the error were:
179 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
180 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
181 60 00 00 00 28 00 00 6c 24 3d 00 40 00 41d+19:05:39.226 READ FPDMA QUEUED
182 60 00 00 01 00 00 00 4a 83 a5 00 40 00 41d+19:05:39.225 READ FPDMA QUEUED
183 60 00 00 01 00 00 00 6c 24 3f 00 40 00 41d+19:05:39.199 READ FPDMA QUEUED
184 60 00 00 01 00 00 00 6c 24 3e 00 40 00 41d+19:05:39.190 READ FPDMA QUEUED
185 60 00 00 00 0b 00 00 6c 24 3d 00 40 00 41d+19:05:39.137 READ FPDMA QUEUED
186
187Error 20 [19] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours)
188 When the command that caused the error occurred, the device was active or idle.
189
190 After command completion occurred, registers were:
191 ER -- ST COUNT LBA_48 LH LM LL DV DC
192 -- -- -- == -- == == == -- -- -- -- --
193 40 -- 51 00 00 00 00 6c 24 3d 0b 00 00 Error: UNC at LBA = 0x6c243d0b = 1814314251
194
195 Commands leading to the command that caused the error were:
196 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
197 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
198 60 00 00 01 00 00 00 6c 24 3d 00 40 00 41d+19:05:36.482 READ FPDMA QUEUED
199 60 00 00 01 00 00 00 6c 24 3c 00 40 00 41d+19:05:36.477 READ FPDMA QUEUED
200 60 00 00 01 00 00 00 6c 24 3a 00 40 00 41d+19:05:36.465 READ FPDMA QUEUED
201 60 00 00 01 00 00 00 6c 24 39 00 40 00 41d+19:05:36.458 READ FPDMA QUEUED
202 60 00 00 01 00 00 00 6c 24 38 00 40 00 41d+19:05:36.452 READ FPDMA QUEUED
203
204Error 19 [18] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours)
205 When the command that caused the error occurred, the device was active or idle.
206
207 After command completion occurred, registers were:
208 ER -- ST COUNT LBA_48 LH LM LL DV DC
209 -- -- -- == -- == == == -- -- -- -- --
210 40 -- 51 00 00 00 00 6c 24 33 ce 00 00 Error: UNC at LBA = 0x6c2433ce = 1814311886
211
212 Commands leading to the command that caused the error were:
213 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
214 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
215 60 00 00 00 32 00 00 6c 24 33 ce 40 00 41d+19:05:33.120 READ FPDMA QUEUED
216 60 00 00 01 00 00 00 4a 83 a3 00 40 00 41d+19:05:33.119 READ FPDMA QUEUED
217 60 00 00 00 a5 00 00 6c 24 33 28 40 00 41d+19:05:33.103 READ FPDMA QUEUED
218 2f 00 00 00 01 00 00 00 00 00 10 00 00 41d+19:05:33.058 READ LOG EXT
219 60 00 00 01 00 00 00 6c 24 37 00 40 00 41d+19:05:30.478 READ FPDMA QUEUED
220
221Error 18 [17] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours)
222 When the command that caused the error occurred, the device was active or idle.
223
224 After command completion occurred, registers were:
225 ER -- ST COUNT LBA_48 LH LM LL DV DC
226 -- -- -- == -- == == == -- -- -- -- --
227 40 -- 51 00 00 00 00 6c 24 33 cd 00 00 Error: UNC at LBA = 0x6c2433cd = 1814311885
228
229 Commands leading to the command that caused the error were:
230 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
231 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
232 60 00 00 01 00 00 00 6c 24 37 00 40 00 41d+19:05:30.478 READ FPDMA QUEUED
233 60 00 00 00 d8 00 00 6c 24 33 28 40 00 41d+19:05:30.478 READ FPDMA QUEUED
234 60 00 00 00 28 00 00 6c 24 33 00 40 00 41d+19:05:30.478 READ FPDMA QUEUED
235 60 00 00 01 00 00 00 4a 83 a2 00 40 00 41d+19:05:30.477 READ FPDMA QUEUED
236 60 00 00 01 00 00 00 4a 83 a1 00 40 00 41d+19:05:30.476 READ FPDMA QUEUED
237
238Error 17 [16] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours)
239 When the command that caused the error occurred, the device was active or idle.
240
241 After command completion occurred, registers were:
242 ER -- ST COUNT LBA_48 LH LM LL DV DC
243 -- -- -- == -- == == == -- -- -- -- --
244 40 -- 51 00 00 00 00 6c 24 33 cd 00 00 Error: UNC at LBA = 0x6c2433cd = 1814311885
245
246 Commands leading to the command that caused the error were:
247 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
248 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
249 60 00 00 01 00 00 00 6c 24 33 00 40 00 41d+19:05:27.787 READ FPDMA QUEUED
250 60 00 00 01 00 00 00 6c 24 32 00 40 00 41d+19:05:27.782 READ FPDMA QUEUED
251 60 00 00 01 00 00 00 6c 24 31 00 40 00 41d+19:05:27.776 READ FPDMA QUEUED
252 60 00 00 01 00 00 00 6c 24 30 00 40 00 41d+19:05:27.771 READ FPDMA QUEUED
253 60 00 00 01 00 00 00 6c 24 2f 00 40 00 41d+19:05:27.764 READ FPDMA QUEUED
254
255Error 16 [15] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours)
256 When the command that caused the error occurred, the device was active or idle.
257
258 After command completion occurred, registers were:
259 ER -- ST COUNT LBA_48 LH LM LL DV DC
260 -- -- -- == -- == == == -- -- -- -- --
261 40 -- 51 00 00 00 00 6c 24 2a 90 00 00 Error: UNC at LBA = 0x6c242a90 = 1814309520
262
263 Commands leading to the command that caused the error were:
264 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
265 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
266 60 00 00 00 d8 00 00 6c 24 2a 28 40 00 41d+19:05:24.834 READ FPDMA QUEUED
267 60 00 00 01 00 00 00 4a 83 9b 00 40 00 41d+19:05:24.834 READ FPDMA QUEUED
268 60 00 00 00 28 00 00 6c 24 2a 00 40 00 41d+19:05:24.824 READ FPDMA QUEUED
269 60 00 00 01 00 00 00 4a 83 9a 00 40 00 41d+19:05:24.819 READ FPDMA QUEUED
270 60 00 00 01 00 00 00 6c 24 2c 00 40 00 41d+19:05:24.818 READ FPDMA QUEUED
271
272SMART Extended Self-test Log Version: 1 (1 sectors)
273Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
274# 1 Short offline Completed without error 00% 680 -
275# 2 Extended offline Completed without error 00% 671 -
276
277SMART Selective self-test log data structure revision number 1
278 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
279 1 0 0 Not_testing
280 2 0 0 Not_testing
281 3 0 0 Not_testing
282 4 0 0 Not_testing
283 5 0 0 Not_testing
284Selective self-test flags (0x0):
285 After scanning selected spans, do NOT read-scan remainder of disk.
286If Selective self-test is pending on power-up, resume after 0 minute delay.
287
288SCT Status Version: 3
289SCT Version (vendor specific): 522 (0x020a)
290Device State: Active (0)
291Current Temperature: 33 Celsius
292Power Cycle Min/Max Temperature: 30/35 Celsius
293Lifetime Min/Max Temperature: 23/54 Celsius
294Under/Over Temperature Limit Count: 0/151
295
296SCT Temperature History Version: 2
297Temperature Sampling Period: 1 minute
298Temperature Logging Interval: 10 minutes
299Min/Max recommended Temperature: 0/ 0 Celsius
300Min/Max Temperature Limit: 0/ 0 Celsius
301Temperature History Size (Index): 128 (79)
302
303Index Estimated Time Temperature Celsius
304 80 2021-01-22 15:00 33 **************
305 ... ..( 21 skipped). .. **************
306 102 2021-01-22 18:40 33 **************
307 103 2021-01-22 18:50 32 *************
308 104 2021-01-22 19:00 33 **************
309 ... ..( 4 skipped). .. **************
310 109 2021-01-22 19:50 33 **************
311 110 2021-01-22 20:00 32 *************
312 111 2021-01-22 20:10 33 **************
313 112 2021-01-22 20:20 32 *************
314 113 2021-01-22 20:30 33 **************
315 114 2021-01-22 20:40 33 **************
316 115 2021-01-22 20:50 34 ***************
317 116 2021-01-22 21:00 34 ***************
318 117 2021-01-22 21:10 34 ***************
319 118 2021-01-22 21:20 35 ****************
320 119 2021-01-22 21:30 34 ***************
321 120 2021-01-22 21:40 35 ****************
322 121 2021-01-22 21:50 34 ***************
323 ... ..( 4 skipped). .. ***************
324 126 2021-01-22 22:40 34 ***************
325 127 2021-01-22 22:50 35 ****************
326 0 2021-01-22 23:00 34 ***************
327 ... ..( 26 skipped). .. ***************
328 27 2021-01-23 03:30 34 ***************
329 28 2021-01-23 03:40 33 **************
330 ... ..( 2 skipped). .. **************
331 31 2021-01-23 04:10 33 **************
332 32 2021-01-23 04:20 32 *************
333 33 2021-01-23 04:30 33 **************
334 34 2021-01-23 04:40 32 *************
335 35 2021-01-23 04:50 33 **************
336 36 2021-01-23 05:00 32 *************
337 37 2021-01-23 05:10 33 **************
338 38 2021-01-23 05:20 32 *************
339 39 2021-01-23 05:30 33 **************
340 40 2021-01-23 05:40 32 *************
341 41 2021-01-23 05:50 33 **************
342 42 2021-01-23 06:00 32 *************
343 43 2021-01-23 06:10 33 **************
344 44 2021-01-23 06:20 32 *************
345 45 2021-01-23 06:30 33 **************
346 46 2021-01-23 06:40 32 *************
347 47 2021-01-23 06:50 32 *************
348 48 2021-01-23 07:00 33 **************
349 49 2021-01-23 07:10 32 *************
350 50 2021-01-23 07:20 33 **************
351 51 2021-01-23 07:30 32 *************
352 52 2021-01-23 07:40 33 **************
353 53 2021-01-23 07:50 32 *************
354 54 2021-01-23 08:00 33 **************
355 55 2021-01-23 08:10 34 ***************
356 56 2021-01-23 08:20 33 **************
357 57 2021-01-23 08:30 32 *************
358 58 2021-01-23 08:40 33 **************
359 ... ..( 4 skipped). .. **************
360 63 2021-01-23 09:30 33 **************
361 64 2021-01-23 09:40 32 *************
362 65 2021-01-23 09:50 33 **************
363 66 2021-01-23 10:00 32 *************
364 67 2021-01-23 10:10 33 **************
365 68 2021-01-23 10:20 32 *************
366 69 2021-01-23 10:30 33 **************
367 70 2021-01-23 10:40 32 *************
368 71 2021-01-23 10:50 33 **************
369 72 2021-01-23 11:00 32 *************
370 73 2021-01-23 11:10 33 **************
371 74 2021-01-23 11:20 32 *************
372 75 2021-01-23 11:30 33 **************
373 ... ..( 3 skipped). .. **************
374 79 2021-01-23 12:10 33 **************
375
376SCT Error Recovery Control:
377 Read: 300 (30.0 seconds)
378 Write: 300 (30.0 seconds)
379
380Device Statistics (GP/SMART Log 0x04) not supported
381
382Pending Defects log (GP Log 0x0c) not supported
383
384SATA Phy Event Counters (GP Log 0x11)
385ID Size Value Description
3860x000a 2 2 Device-to-host register FISes sent due to a COMRESET
3870x0001 2 0 Command failed due to ICRC error
3880x0003 2 0 R_ERR response for device-to-host data FIS
3890x0004 2 0 R_ERR response for host-to-device data FIS
3900x0006 2 0 R_ERR response for device-to-host non-data FIS
3910x0007 2 0 R_ERR response for host-to-device non-data FIS
392