1 | smartctl 7.1 2019-12-30 r5022 [Darwin 19.6.0 x86_64] (local build)
|
---|
2 | Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: WDC WD140EDFZ-11A0VA0
|
---|
6 | Firmware Version: 81.00A81
|
---|
7 | User Capacity: 14,000,519,643,136 bytes [14.0 TB]
|
---|
8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
9 | Rotation Rate: 5400 rpm
|
---|
10 | Form Factor: 3.5 inches
|
---|
11 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
12 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
|
---|
13 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
14 | Local Time is: Fri Dec 18 18:38:35 2020 GMT
|
---|
15 | SMART support is: Available - device has SMART capability.
|
---|
16 | SMART support is: Enabled
|
---|
17 | AAM feature is: Unavailable
|
---|
18 | APM feature is: Disabled
|
---|
19 | Rd look-ahead is: Enabled
|
---|
20 | Write cache is: Enabled
|
---|
21 | DSN feature is: Unavailable
|
---|
22 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
23 | Wt Cache Reorder: Unknown
|
---|
24 |
|
---|
25 | === START OF READ SMART DATA SECTION ===
|
---|
26 | SMART overall-health self-assessment test result: PASSED
|
---|
27 |
|
---|
28 | General SMART Values:
|
---|
29 | Offline data collection status: (0x80) Offline data collection activity
|
---|
30 | was never started.
|
---|
31 | Auto Offline Data Collection: Enabled.
|
---|
32 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
33 | without error or no self-test has ever
|
---|
34 | been run.
|
---|
35 | Total time to complete Offline
|
---|
36 | data collection: ( 101) seconds.
|
---|
37 | Offline data collection
|
---|
38 | capabilities: (0x5b) SMART execute Offline immediate.
|
---|
39 | Auto Offline data collection on/off support.
|
---|
40 | Suspend Offline collection upon new
|
---|
41 | command.
|
---|
42 | Offline surface scan supported.
|
---|
43 | Self-test supported.
|
---|
44 | No Conveyance Self-test supported.
|
---|
45 | Selective Self-test supported.
|
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
47 | power-saving mode.
|
---|
48 | Supports SMART auto save timer.
|
---|
49 | Error logging capability: (0x01) Error logging supported.
|
---|
50 | General Purpose Logging supported.
|
---|
51 | Short self-test routine
|
---|
52 | recommended polling time: ( 2) minutes.
|
---|
53 | Extended self-test routine
|
---|
54 | recommended polling time: (1339) minutes.
|
---|
55 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
56 | SCT Error Recovery Control supported.
|
---|
57 | SCT Feature Control supported.
|
---|
58 | SCT Data Table supported.
|
---|
59 |
|
---|
60 | SMART Attributes Data Structure revision number: 16
|
---|
61 | Vendor Specific SMART Attributes with Thresholds:
|
---|
62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
63 | 1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0
|
---|
64 | 2 Throughput_Performance --S--- 100 100 054 - 0
|
---|
65 | 3 Spin_Up_Time POS--- 086 086 001 - 238 (Average 340)
|
---|
66 | 4 Start_Stop_Count -O--C- 100 100 000 - 10
|
---|
67 | 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0
|
---|
68 | 7 Seek_Error_Rate -O-R-- 100 100 001 - 0
|
---|
69 | 8 Seek_Time_Performance --S--- 100 100 020 - 0
|
---|
70 | 9 Power_On_Hours -O--C- 100 100 000 - 0
|
---|
71 | 10 Spin_Retry_Count -O--C- 100 100 001 - 0
|
---|
72 | 12 Power_Cycle_Count -O--CK 100 100 000 - 10
|
---|
73 | 22 Unknown_Attribute PO---K 100 100 025 - 100
|
---|
74 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 10
|
---|
75 | 193 Load_Cycle_Count -O--C- 100 100 000 - 10
|
---|
76 | 194 Temperature_Celsius -O---- 039 039 000 - 40 (Min/Max 22/40)
|
---|
77 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
---|
78 | 197 Current_Pending_Sector -O---K 100 100 000 - 0
|
---|
79 | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
|
---|
80 | 199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0
|
---|
81 | ||||||_ K auto-keep
|
---|
82 | |||||__ C event count
|
---|
83 | ||||___ R error rate
|
---|
84 | |||____ S speed/performance
|
---|
85 | ||_____ O updated online
|
---|
86 | |______ P prefailure warning
|
---|
87 |
|
---|
88 | ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented
|
---|
89 | Read GP Log Directory failed
|
---|
90 |
|
---|
91 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
92 | Address Access R/W Size Description
|
---|
93 | 0x00 SL R/O 1 Log Directory
|
---|
94 | 0x01 SL R/O 1 Summary SMART error log
|
---|
95 | 0x02 SL R/O 1 Comprehensive SMART error log
|
---|
96 | 0x04 SL R/O 255 Device Statistics log
|
---|
97 | 0x06 SL R/O 1 SMART self-test log
|
---|
98 | 0x09 SL R/W 1 Selective self-test log
|
---|
99 | 0x30 SL R/O 9 IDENTIFY DEVICE data log
|
---|
100 | 0x80-0x9f SL R/W 16 Host vendor specific log
|
---|
101 | 0xe0 SL R/W 1 SCT Command/Status
|
---|
102 | 0xe1 SL R/W 1 SCT Data Transfer
|
---|
103 |
|
---|
104 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
---|
105 |
|
---|
106 | SMART Error Log Version: 1
|
---|
107 | No Errors Logged
|
---|
108 |
|
---|
109 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
---|
110 |
|
---|
111 | SMART Self-test log structure revision number 1
|
---|
112 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
113 | # 1 Short offline Completed without error 00% 0 -
|
---|
114 |
|
---|
115 | SMART Selective self-test log data structure revision number 1
|
---|
116 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
117 | 1 0 0 Not_testing
|
---|
118 | 2 0 0 Not_testing
|
---|
119 | 3 0 0 Not_testing
|
---|
120 | 4 0 0 Not_testing
|
---|
121 | 5 0 0 Not_testing
|
---|
122 | Selective self-test flags (0x0):
|
---|
123 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
124 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
125 |
|
---|
126 | SCT Status Version: 3
|
---|
127 | SCT Version (vendor specific): 256 (0x0100)
|
---|
128 | Device State: Active (0)
|
---|
129 | Current Temperature: 40 Celsius
|
---|
130 | Power Cycle Min/Max Temperature: 36/40 Celsius
|
---|
131 | Lifetime Min/Max Temperature: 22/40 Celsius
|
---|
132 | Under/Over Temperature Limit Count: 0/0
|
---|
133 | SMART Status: 0xc24f (PASSED)
|
---|
134 | Minimum supported ERC Time Limit: 65 (6.5 seconds)
|
---|
135 |
|
---|
136 | SCT Temperature History Version: 2
|
---|
137 | Temperature Sampling Period: 1 minute
|
---|
138 | Temperature Logging Interval: 1 minute
|
---|
139 | Min/Max recommended Temperature: 0/65 Celsius
|
---|
140 | Min/Max Temperature Limit: -40/70 Celsius
|
---|
141 | Temperature History Size (Index): 128 (53)
|
---|
142 |
|
---|
143 | Index Estimated Time Temperature Celsius
|
---|
144 | 54 2020-12-18 16:31 0 -
|
---|
145 | ... ..( 72 skipped). .. -
|
---|
146 | 127 2020-12-18 17:44 0 -
|
---|
147 | 0 2020-12-18 17:45 24 *****
|
---|
148 | 1 2020-12-18 17:46 25 ******
|
---|
149 | 2 2020-12-18 17:47 22 ***
|
---|
150 | 3 2020-12-18 17:48 24 *****
|
---|
151 | 4 2020-12-18 17:49 24 *****
|
---|
152 | 5 2020-12-18 17:50 25 ******
|
---|
153 | 6 2020-12-18 17:51 25 ******
|
---|
154 | 7 2020-12-18 17:52 26 *******
|
---|
155 | 8 2020-12-18 17:53 27 ********
|
---|
156 | 9 2020-12-18 17:54 27 ********
|
---|
157 | 10 2020-12-18 17:55 28 *********
|
---|
158 | 11 2020-12-18 17:56 28 *********
|
---|
159 | 12 2020-12-18 17:57 29 **********
|
---|
160 | 13 2020-12-18 17:58 30 ***********
|
---|
161 | 14 2020-12-18 17:59 30 ***********
|
---|
162 | 15 2020-12-18 18:00 31 ************
|
---|
163 | 16 2020-12-18 18:01 31 ************
|
---|
164 | 17 2020-12-18 18:02 32 *************
|
---|
165 | 18 2020-12-18 18:03 32 *************
|
---|
166 | 19 2020-12-18 18:04 32 *************
|
---|
167 | 20 2020-12-18 18:05 33 **************
|
---|
168 | 21 2020-12-18 18:06 33 **************
|
---|
169 | 22 2020-12-18 18:07 34 ***************
|
---|
170 | ... ..( 2 skipped). .. ***************
|
---|
171 | 25 2020-12-18 18:10 34 ***************
|
---|
172 | 26 2020-12-18 18:11 35 ****************
|
---|
173 | 27 2020-12-18 18:12 35 ****************
|
---|
174 | 28 2020-12-18 18:13 36 *****************
|
---|
175 | 29 2020-12-18 18:14 34 ***************
|
---|
176 | 30 2020-12-18 18:15 35 ****************
|
---|
177 | 31 2020-12-18 18:16 35 ****************
|
---|
178 | 32 2020-12-18 18:17 35 ****************
|
---|
179 | 33 2020-12-18 18:18 36 *****************
|
---|
180 | ... ..( 4 skipped). .. *****************
|
---|
181 | 38 2020-12-18 18:23 36 *****************
|
---|
182 | 39 2020-12-18 18:24 37 ******************
|
---|
183 | 40 2020-12-18 18:25 37 ******************
|
---|
184 | 41 2020-12-18 18:26 37 ******************
|
---|
185 | 42 2020-12-18 18:27 38 *******************
|
---|
186 | ... ..( 3 skipped). .. *******************
|
---|
187 | 46 2020-12-18 18:31 38 *******************
|
---|
188 | 47 2020-12-18 18:32 39 ********************
|
---|
189 | ... ..( 2 skipped). .. ********************
|
---|
190 | 50 2020-12-18 18:35 39 ********************
|
---|
191 | 51 2020-12-18 18:36 40 *********************
|
---|
192 | 52 2020-12-18 18:37 40 *********************
|
---|
193 | 53 2020-12-18 18:38 0 -
|
---|
194 |
|
---|
195 | SMART WRITE LOG does not return COUNT and LBA_LOW register
|
---|
196 | SCT (Get) Error Recovery Control command failed
|
---|
197 |
|
---|
198 | Device Statistics (SMART Log 0x04)
|
---|
199 | Page Offset Size Value Flags Description
|
---|
200 | ATA_SMART_READ_LOG failed: Undefined error: 0
|
---|
201 | Read Device Statistics pages 0x00-0x06 failed
|
---|
202 |
|
---|
203 | Pending Defects log (GP Log 0x0c) not supported
|
---|
204 |
|
---|
205 | ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented
|
---|
206 | Read SATA Phy Event Counters failed
|
---|
207 |
|
---|