1 | smartctl 7.0 2019-05-21 r4917 [aarch64-linux-5.3.18-lp152.57-default] (SUSE RPM) |
---|
2 | Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: Hitachi HTS545025B9SA02 |
---|
6 | Serial Number: 100508PBL2003SK1818V |
---|
7 | LU WWN Device Id: 5 000cca 5f3ead911 |
---|
8 | Firmware Version: PB2AC60W |
---|
9 | User Capacity: 250,059,350,016 bytes [250 GB] |
---|
10 | Sector Size: 512 bytes logical/physical |
---|
11 | Rotation Rate: 5400 rpm |
---|
12 | Form Factor: 2.5 inches |
---|
13 | Device is: Not in smartctl database [for details use: -P showall] |
---|
14 | ATA Version is: ATA8-ACS T13/1699-D revision 6 |
---|
15 | SATA Version is: SATA 2.6, 1.5 Gb/s |
---|
16 | Local Time is: Thu Dec 10 02:11:17 2020 CST |
---|
17 | SMART support is: Available - device has SMART capability. |
---|
18 | SMART support is: Enabled |
---|
19 | AAM feature is: Disabled |
---|
20 | APM level is: 128 (minimum power consumption without standby) |
---|
21 | Rd look-ahead is: Enabled |
---|
22 | Write cache is: Enabled |
---|
23 | DSN feature is: Unavailable |
---|
24 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
25 | Wt Cache Reorder: Enabled |
---|
26 | |
---|
27 | === START OF READ SMART DATA SECTION === |
---|
28 | SMART overall-health self-assessment test result: PASSED |
---|
29 | |
---|
30 | General SMART Values: |
---|
31 | Offline data collection status: (0x82) Offline data collection activity |
---|
32 | was completed without error. |
---|
33 | Auto Offline Data Collection: Enabled. |
---|
34 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
35 | without error or no self-test has ever |
---|
36 | been run. |
---|
37 | Total time to complete Offline |
---|
38 | data collection: ( 645) seconds. |
---|
39 | Offline data collection |
---|
40 | capabilities: (0x5b) SMART execute Offline immediate. |
---|
41 | Auto Offline data collection on/off support. |
---|
42 | Suspend Offline collection upon new |
---|
43 | command. |
---|
44 | Offline surface scan supported. |
---|
45 | Self-test supported. |
---|
46 | No Conveyance Self-test supported. |
---|
47 | Selective Self-test supported. |
---|
48 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
49 | power-saving mode. |
---|
50 | Supports SMART auto save timer. |
---|
51 | Error logging capability: (0x01) Error logging supported. |
---|
52 | General Purpose Logging supported. |
---|
53 | Short self-test routine |
---|
54 | recommended polling time: ( 2) minutes. |
---|
55 | Extended self-test routine |
---|
56 | recommended polling time: ( 83) minutes. |
---|
57 | SCT capabilities: (0x003d) SCT Status supported. |
---|
58 | SCT Error Recovery Control supported. |
---|
59 | SCT Feature Control supported. |
---|
60 | SCT Data Table supported. |
---|
61 | |
---|
62 | SMART Attributes Data Structure revision number: 16 |
---|
63 | Vendor Specific SMART Attributes with Thresholds: |
---|
64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
65 | 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 |
---|
66 | 2 Throughput_Performance P-S--- 112 112 040 - 4262 |
---|
67 | 3 Spin_Up_Time POS--- 209 209 033 - 1 |
---|
68 | 4 Start_Stop_Count -O--C- 099 099 000 - 3052 |
---|
69 | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 |
---|
70 | 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 |
---|
71 | 8 Seek_Time_Performance P-S--- 113 113 040 - 35 |
---|
72 | 9 Power_On_Hours -O--C- 097 097 000 - 1417 |
---|
73 | 10 Spin_Retry_Count PO--C- 100 100 060 - 0 |
---|
74 | 12 Power_Cycle_Count -O--CK 099 099 000 - 2028 |
---|
75 | 160 Unknown_Attribute -O--CK 100 100 000 - 0 |
---|
76 | 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 665719930880 |
---|
77 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 8593276989 |
---|
78 | 193 Load_Cycle_Count -O--C- 089 089 000 - 119781 |
---|
79 | 194 Temperature_Celsius -O---- 152 152 000 - 36 (Min/Max 16/48) |
---|
80 | 195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 0 |
---|
81 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 |
---|
82 | 197 Current_Pending_Sector -O---K 100 100 000 - 0 |
---|
83 | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 |
---|
84 | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 |
---|
85 | 223 Load_Retry_Count -O-R-- 100 100 000 - 0 |
---|
86 | 254 Free_Fall_Sensor -O--CK 098 098 000 - 629 |
---|
87 | ||||||_ K auto-keep |
---|
88 | |||||__ C event count |
---|
89 | ||||___ R error rate |
---|
90 | |||____ S speed/performance |
---|
91 | ||_____ O updated online |
---|
92 | |______ P prefailure warning |
---|
93 | |
---|
94 | General Purpose Log Directory Version 1 |
---|
95 | SMART Log Directory Version 1 [multi-sector log support] |
---|
96 | Address Access R/W Size Description |
---|
97 | 0x00 GPL,SL R/O 1 Log Directory |
---|
98 | 0x01 SL R/O 1 Summary SMART error log |
---|
99 | 0x02 SL R/O 1 Comprehensive SMART error log |
---|
100 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log |
---|
101 | 0x06 SL R/O 1 SMART self-test log |
---|
102 | 0x07 GPL R/O 1 Extended self-test log |
---|
103 | 0x09 SL R/W 1 Selective self-test log |
---|
104 | 0x10 GPL R/O 1 NCQ Command Error log |
---|
105 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
---|
106 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
107 | 0xa2 SL VS 1 Device vendor specific log |
---|
108 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
109 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
110 | |
---|
111 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
---|
112 | No Errors Logged |
---|
113 | |
---|
114 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
115 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
116 | # 1 Short offline Completed without error 00% 1394 - |
---|
117 | # 2 Extended offline Aborted by host 80% 1371 - |
---|
118 | # 3 Short offline Completed without error 00% 1358 - |
---|
119 | # 4 Short offline Completed without error 00% 1242 - |
---|
120 | # 5 Short offline Completed without error 00% 1208 - |
---|
121 | # 6 Short offline Completed without error 00% 1170 - |
---|
122 | |
---|
123 | SMART Selective self-test log data structure revision number 1 |
---|
124 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
125 | 1 0 0 Not_testing |
---|
126 | 2 0 0 Not_testing |
---|
127 | 3 0 0 Not_testing |
---|
128 | 4 0 0 Not_testing |
---|
129 | 5 0 0 Not_testing |
---|
130 | Selective self-test flags (0x0): |
---|
131 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
132 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
133 | |
---|
134 | SCT Status Version: 3 |
---|
135 | SCT Version (vendor specific): 256 (0x0100) |
---|
136 | Device State: Active (0) |
---|
137 | Current Temperature: 36 Celsius |
---|
138 | Power Cycle Min/Max Temperature: 34/37 Celsius |
---|
139 | Lifetime Min/Max Temperature: 16/48 Celsius |
---|
140 | Specified Max Operating Temperature: 32 Celsius |
---|
141 | Under/Over Temperature Limit Count: 0/0 |
---|
142 | |
---|
143 | SCT Temperature History Version: 2 |
---|
144 | Temperature Sampling Period: 1 minute |
---|
145 | Temperature Logging Interval: 1 minute |
---|
146 | Min/Max recommended Temperature: 5/60 Celsius |
---|
147 | Min/Max Temperature Limit: -40/65 Celsius |
---|
148 | Temperature History Size (Index): 478 (25) |
---|
149 | |
---|
150 | Index Estimated Time Temperature Celsius |
---|
151 | 26 2020-12-09 18:14 36 ***************** |
---|
152 | ... ..( 13 skipped). .. ***************** |
---|
153 | 40 2020-12-09 18:28 36 ***************** |
---|
154 | 41 2020-12-09 18:29 37 ****************** |
---|
155 | ... ..(207 skipped). .. ****************** |
---|
156 | 249 2020-12-09 21:57 37 ****************** |
---|
157 | 250 2020-12-09 21:58 36 ***************** |
---|
158 | ... ..( 6 skipped). .. ***************** |
---|
159 | 257 2020-12-09 22:05 36 ***************** |
---|
160 | 258 2020-12-09 22:06 37 ****************** |
---|
161 | ... ..( 19 skipped). .. ****************** |
---|
162 | 278 2020-12-09 22:26 37 ****************** |
---|
163 | 279 2020-12-09 22:27 36 ***************** |
---|
164 | ... ..( 2 skipped). .. ***************** |
---|
165 | 282 2020-12-09 22:30 36 ***************** |
---|
166 | 283 2020-12-09 22:31 37 ****************** |
---|
167 | 284 2020-12-09 22:32 36 ***************** |
---|
168 | ... ..( 24 skipped). .. ***************** |
---|
169 | 309 2020-12-09 22:57 36 ***************** |
---|
170 | 310 2020-12-09 22:58 37 ****************** |
---|
171 | 311 2020-12-09 22:59 36 ***************** |
---|
172 | ... ..( 2 skipped). .. ***************** |
---|
173 | 314 2020-12-09 23:02 36 ***************** |
---|
174 | 315 2020-12-09 23:03 37 ****************** |
---|
175 | 316 2020-12-09 23:04 36 ***************** |
---|
176 | 317 2020-12-09 23:05 36 ***************** |
---|
177 | 318 2020-12-09 23:06 36 ***************** |
---|
178 | 319 2020-12-09 23:07 37 ****************** |
---|
179 | ... ..( 3 skipped). .. ****************** |
---|
180 | 323 2020-12-09 23:11 37 ****************** |
---|
181 | 324 2020-12-09 23:12 36 ***************** |
---|
182 | 325 2020-12-09 23:13 36 ***************** |
---|
183 | 326 2020-12-09 23:14 36 ***************** |
---|
184 | 327 2020-12-09 23:15 37 ****************** |
---|
185 | 328 2020-12-09 23:16 37 ****************** |
---|
186 | 329 2020-12-09 23:17 36 ***************** |
---|
187 | ... ..(173 skipped). .. ***************** |
---|
188 | 25 2020-12-10 02:11 36 ***************** |
---|
189 | |
---|
190 | SCT Error Recovery Control: |
---|
191 | Read: Disabled |
---|
192 | Write: Disabled |
---|
193 | |
---|
194 | Device Statistics (GP/SMART Log 0x04) not supported |
---|
195 | |
---|
196 | Pending Defects log (GP Log 0x0c) not supported |
---|
197 | |
---|
198 | SATA Phy Event Counters (GP Log 0x11) |
---|
199 | ID Size Value Description |
---|
200 | 0x0001 2 0 Command failed due to ICRC error |
---|
201 | 0x0002 2 0 R_ERR response for data FIS |
---|
202 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
203 | 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy |
---|
204 | 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET |
---|
205 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
206 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
---|
207 | |
---|