Ticket #1403: smartctl_debug.txt

File smartctl_debug.txt, 6.9 KB (added by Sylvain Miossec, 3 years ago)

Also attached is with debug info with command sudo smartctl -x -d scsi /dev/sda2 -r ioctl,2 > smartctl_debug.txt

Line 
1smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.72-gentoo] (local build)
2Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
3
4>>>> do_scsi_cmnd_io: sg_io_ver=3
5 [inquiry: 12 01 00 00 fc 00 ]
6 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
7 sg_info=0x0 sg_duration=32 milliseconds resid=242
8 Incoming data, len=10:
9 00 00 00 00 06 00 80 83 b0 b1 b2
10>>>> do_scsi_cmnd_io: sg_io_ver=3
11 [inquiry: 12 00 00 00 24 00 ]
12 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
13 sg_info=0x0 sg_duration=0 milliseconds resid=0
14 Incoming data, len=36:
15 00 00 00 06 02 47 00 00 00 53 61 6d 73 75 6e 67 20
16 10 50 53 53 44 20 54 37 20 20 20 20 20 20 20 20 20
17 20 30 20 20 20
18=== START OF INFORMATION SECTION ===
19Vendor: Samsung
20Product: PSSD T7
21Revision: 0
22Compliance: SPC-4
23>>>> do_scsi_cmnd_io: sg_io_ver=3
24 [read capacity(16): 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00 ]
25 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
26 sg_info=0x0 sg_duration=0 milliseconds resid=0
27 Incoming data, len=32:
28 00 00 00 00 00 74 70 6d af 00 00 02 00 00 00 00 00
29 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30User Capacity: 1 000 204 886 016 bytes [1,00 TB]
31Logical block size: 512 bytes
32>>>> do_scsi_cmnd_io: sg_io_ver=3
33 [inquiry: 12 01 b2 00 08 00 ]
34 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
35 sg_info=0x0 sg_duration=0 milliseconds resid=0
36 Incoming data, len=8:
37 00 00 b2 00 04 00 80 00 00
38LU is fully provisioned
39>>>> do_scsi_cmnd_io: sg_io_ver=3
40 [inquiry: 12 01 b1 00 40 00 ]
41 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
42 sg_info=0x0 sg_duration=0 milliseconds resid=0
43 Incoming data, len=64:
44 00 00 b1 00 3c 00 01 00 00 00 00 00 00 00 00 00 00
45 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
46 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
47 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
48Rotation Rate: Solid State Device
49>>>> do_scsi_cmnd_io: sg_io_ver=3
50 [mode sense(6): 1a 00 1c 00 40 00 ]
51 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
52 sg_info=0x0 sg_duration=0 milliseconds resid=48
53 Incoming data, len=16:
54 00 0f 00 00 00 1c 0a 00 00 00 00 00 00 00 00 00 00
55>>>> do_scsi_cmnd_io: sg_io_ver=3
56 [mode sense(6): 1a 00 5c 00 40 00 ]
57 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
58 sg_info=0x0 sg_duration=0 milliseconds resid=48
59 Incoming data, len=16:
60 00 0f 00 00 00 1c 0a 00 00 00 00 00 00 00 00 00 00
61>>>> do_scsi_cmnd_io: sg_io_ver=3
62 [inquiry: 12 01 83 00 fc 00 ]
63 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
64 sg_info=0x0 sg_duration=0 milliseconds resid=236
65 Incoming data, len=16:
66 00 00 83 00 0c 01 03 00 08 50 00 00 00 00 00 00 01
67Logical Unit id: 0x5000000000000001
68>>>> do_scsi_cmnd_io: sg_io_ver=3
69 [inquiry: 12 01 80 00 fc 00 ]
70 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
71 sg_info=0x0 sg_duration=1 milliseconds resid=233
72 Incoming data, len=19:
73 00 00 80 00 0f 5a 33 36 39 30 30 34 4e 30 4b 4e 31
74 10 54 35 53
75Serial number: Z369004N0KN1T5S
76Device type: disk
77>>>> do_scsi_cmnd_io: sg_io_ver=3
78 [mode sense(6): 1a 00 19 00 40 00 ]
79 scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
80 sg_info=0x1 sg_duration=0 milliseconds resid=64
81 Incoming data trimmed to nothing by resid
82 >>> Sense buffer, len=18:
83 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00
84 10 00 00
85 status=2: sense_key=5 asc=24 ascq=0
86Local Time is: Mon Nov 30 09:55:13 2020 CET
87>>>> do_scsi_cmnd_io: sg_io_ver=3
88 [test unit ready: 00 00 00 00 00 00 ]
89 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
90 sg_info=0x0 sg_duration=0 milliseconds resid=0
91SMART support is: Available - device has SMART capability.
92SMART support is: Enabled
93Temperature Warning: Disabled or Not Supported
94>>>> do_scsi_cmnd_io: sg_io_ver=3
95 [mode sense(6): 1a 00 08 00 40 00 ]
96 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
97 sg_info=0x0 sg_duration=0 milliseconds resid=40
98 Incoming data, len=24:
99 00 17 00 00 00 08 12 04 00 00 00 00 00 00 00 00 00
100 10 00 00 00 00 00 00 00 00
101Read Cache is: Enabled
102Writeback Cache is: Enabled
103
104=== START OF READ SMART DATA SECTION ===
105>>>> do_scsi_cmnd_io: sg_io_ver=3
106 [log sense: 4d 00 40 00 00 00 00 00 04 00 ]
107 scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
108 sg_info=0x1 sg_duration=1 milliseconds resid=4
109 Incoming data trimmed to nothing by resid
110 >>> Sense buffer, len=18:
111 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00
112 10 00 00
113 status=2: sense_key=5 asc=20 ascq=0
114Log Sense for supported pages failed [unsupported scsi opcode]
115>>>> do_scsi_cmnd_io: sg_io_ver=3
116 [log sense: 4d 00 40 00 00 00 00 00 44 00 ]
117 scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
118 sg_info=0x1 sg_duration=0 milliseconds resid=68
119 Incoming data trimmed to nothing by resid
120 >>> Sense buffer, len=18:
121 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00
122 10 00 00
123 status=2: sense_key=5 asc=20 ascq=0
124Log Sense for supported pages failed (second attempt) [unsupported scsi opcode]
125>>>> do_scsi_cmnd_io: sg_io_ver=3
126 [request sense: 03 00 00 00 12 00 ]
127 scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
128 sg_info=0x0 sg_duration=0 milliseconds resid=0
129 Incoming data, len=18:
130 00 70 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 00
131 10 00 00
132SMART Health Status: OK
133Current Drive Temperature: 0 C
134Drive Trip Temperature: 0 C
135
136>>>> do_scsi_cmnd_io: sg_io_ver=3
137 [read defect list(12): b7 0c 00 00 00 00 00 00 00 08 00 00 ]
138 scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
139 sg_info=0x1 sg_duration=1 milliseconds resid=8
140 Incoming data trimmed to nothing by resid
141 >>> Sense buffer, len=18:
142 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00
143 10 00 00
144 status=2: sense_key=5 asc=20 ascq=0
145>>>> do_scsi_cmnd_io: sg_io_ver=3
146 [read defect list(10): 37 00 0c 00 00 00 00 00 04 00 ]
147 scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
148 sg_info=0x1 sg_duration=0 milliseconds resid=4
149 Incoming data trimmed to nothing by resid
150 >>> Sense buffer, len=18:
151 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00
152 10 00 00
153 status=2: sense_key=5 asc=20 ascq=0
154Read defect list (10) Failed: unsupported scsi opcode
155Error Counter logging not supported
156
157>>>> do_scsi_cmnd_io: sg_io_ver=3
158 [mode sense(6): 1a 00 0a 00 40 00 ]
159 scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
160 sg_info=0x1 sg_duration=0 milliseconds resid=64
161 Incoming data trimmed to nothing by resid
162 >>> Sense buffer, len=18:
163 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00
164 10 00 00
165 status=2: sense_key=5 asc=24 ascq=0
166Device does not support Self Test logging
167Device does not support Background scan results logging