1 | smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.72-gentoo] (local build) |
---|
2 | Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
5 | [inquiry: 12 00 00 00 24 00 ] |
---|
6 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
7 | sg_info=0x0 sg_duration=2 milliseconds resid=0 |
---|
8 | Incoming data, len=36: |
---|
9 | 00 00 00 06 02 47 00 00 02 53 61 6d 73 75 6e 67 20 |
---|
10 | 10 50 53 53 44 20 54 37 20 20 20 20 20 20 20 20 20 |
---|
11 | 20 30 20 20 20 |
---|
12 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
13 | [inquiry: 12 01 00 00 fc 00 ] |
---|
14 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
15 | sg_info=0x0 sg_duration=0 milliseconds resid=242 |
---|
16 | Incoming data, len=10: |
---|
17 | 00 00 00 00 06 00 80 83 b0 b1 b2 |
---|
18 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
19 | [inquiry: 12 00 00 00 24 00 ] |
---|
20 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
21 | sg_info=0x0 sg_duration=0 milliseconds resid=0 |
---|
22 | Incoming data, len=36: |
---|
23 | 00 00 00 06 02 47 00 00 02 53 61 6d 73 75 6e 67 20 |
---|
24 | 10 50 53 53 44 20 54 37 20 20 20 20 20 20 20 20 20 |
---|
25 | 20 30 20 20 20 |
---|
26 | === START OF INFORMATION SECTION === |
---|
27 | Vendor: Samsung |
---|
28 | Product: PSSD T7 |
---|
29 | Revision: 0 |
---|
30 | Compliance: SPC-4 |
---|
31 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
32 | [read capacity(16): 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00 ] |
---|
33 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
34 | sg_info=0x0 sg_duration=0 milliseconds resid=0 |
---|
35 | Incoming data, len=32: |
---|
36 | 00 00 00 00 00 74 70 6d af 00 00 02 00 00 00 00 00 |
---|
37 | 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
---|
38 | User Capacity: 1 000 204 886 016 bytes [1,00 TB] |
---|
39 | Logical block size: 512 bytes |
---|
40 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
41 | [inquiry: 12 01 b2 00 08 00 ] |
---|
42 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
43 | sg_info=0x0 sg_duration=0 milliseconds resid=0 |
---|
44 | Incoming data, len=8: |
---|
45 | 00 00 b2 00 04 00 80 00 00 |
---|
46 | LU is fully provisioned |
---|
47 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
48 | [inquiry: 12 01 b1 00 40 00 ] |
---|
49 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
50 | sg_info=0x0 sg_duration=0 milliseconds resid=0 |
---|
51 | Incoming data, len=64: |
---|
52 | 00 00 b1 00 3c 00 01 00 00 00 00 00 00 00 00 00 00 |
---|
53 | 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
---|
54 | 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
---|
55 | 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |
---|
56 | Rotation Rate: Solid State Device |
---|
57 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
58 | [mode sense(6): 1a 00 1c 00 40 00 ] |
---|
59 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
60 | sg_info=0x0 sg_duration=0 milliseconds resid=48 |
---|
61 | Incoming data, len=16: |
---|
62 | 00 0f 00 00 00 1c 0a 00 00 00 00 00 00 00 00 00 00 |
---|
63 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
64 | [mode sense(6): 1a 00 5c 00 40 00 ] |
---|
65 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
66 | sg_info=0x0 sg_duration=0 milliseconds resid=48 |
---|
67 | Incoming data, len=16: |
---|
68 | 00 0f 00 00 00 1c 0a 00 00 00 00 00 00 00 00 00 00 |
---|
69 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
70 | [inquiry: 12 01 83 00 fc 00 ] |
---|
71 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
72 | sg_info=0x0 sg_duration=0 milliseconds resid=236 |
---|
73 | Incoming data, len=16: |
---|
74 | 00 00 83 00 0c 01 03 00 08 50 00 00 00 00 00 00 01 |
---|
75 | Logical Unit id: 0x5000000000000001 |
---|
76 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
77 | [inquiry: 12 01 80 00 fc 00 ] |
---|
78 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
79 | sg_info=0x0 sg_duration=0 milliseconds resid=233 |
---|
80 | Incoming data, len=19: |
---|
81 | 00 00 80 00 0f 5a 33 36 39 30 30 34 4e 30 4b 4e 31 |
---|
82 | 10 54 35 53 |
---|
83 | Serial number: Z369004N0KN1T5S |
---|
84 | Device type: disk |
---|
85 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
86 | [mode sense(6): 1a 00 19 00 40 00 ] |
---|
87 | scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8 |
---|
88 | sg_info=0x1 sg_duration=0 milliseconds resid=64 |
---|
89 | Incoming data trimmed to nothing by resid |
---|
90 | >>> Sense buffer, len=18: |
---|
91 | 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 |
---|
92 | 10 00 00 |
---|
93 | status=2: sense_key=5 asc=24 ascq=0 |
---|
94 | Local Time is: Mon Nov 30 12:48:30 2020 CET |
---|
95 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
96 | [test unit ready: 00 00 00 00 00 00 ] |
---|
97 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
98 | sg_info=0x0 sg_duration=0 milliseconds resid=0 |
---|
99 | SMART support is: Available - device has SMART capability. |
---|
100 | SMART support is: Enabled |
---|
101 | Temperature Warning: Disabled or Not Supported |
---|
102 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
103 | [mode sense(6): 1a 00 08 00 40 00 ] |
---|
104 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
105 | sg_info=0x0 sg_duration=0 milliseconds resid=40 |
---|
106 | Incoming data, len=24: |
---|
107 | 00 17 00 00 00 08 12 04 00 00 00 00 00 00 00 00 00 |
---|
108 | 10 00 00 00 00 00 00 00 00 |
---|
109 | Read Cache is: Enabled |
---|
110 | Writeback Cache is: Enabled |
---|
111 | |
---|
112 | === START OF READ SMART DATA SECTION === |
---|
113 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
114 | [log sense: 4d 00 40 00 00 00 00 00 04 00 ] |
---|
115 | scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8 |
---|
116 | sg_info=0x1 sg_duration=1 milliseconds resid=4 |
---|
117 | Incoming data trimmed to nothing by resid |
---|
118 | >>> Sense buffer, len=18: |
---|
119 | 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 |
---|
120 | 10 00 00 |
---|
121 | status=2: sense_key=5 asc=20 ascq=0 |
---|
122 | Log Sense for supported pages failed [unsupported scsi opcode] |
---|
123 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
124 | [log sense: 4d 00 40 00 00 00 00 00 44 00 ] |
---|
125 | scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8 |
---|
126 | sg_info=0x1 sg_duration=0 milliseconds resid=68 |
---|
127 | Incoming data trimmed to nothing by resid |
---|
128 | >>> Sense buffer, len=18: |
---|
129 | 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 |
---|
130 | 10 00 00 |
---|
131 | status=2: sense_key=5 asc=20 ascq=0 |
---|
132 | Log Sense for supported pages failed (second attempt) [unsupported scsi opcode] |
---|
133 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
134 | [request sense: 03 00 00 00 12 00 ] |
---|
135 | scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0 |
---|
136 | sg_info=0x0 sg_duration=0 milliseconds resid=0 |
---|
137 | Incoming data, len=18: |
---|
138 | 00 70 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 00 |
---|
139 | 10 00 00 |
---|
140 | SMART Health Status: OK |
---|
141 | Current Drive Temperature: 0 C |
---|
142 | Drive Trip Temperature: 0 C |
---|
143 | |
---|
144 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
145 | [read defect list(12): b7 0c 00 00 00 00 00 00 00 08 00 00 ] |
---|
146 | scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8 |
---|
147 | sg_info=0x1 sg_duration=0 milliseconds resid=8 |
---|
148 | Incoming data trimmed to nothing by resid |
---|
149 | >>> Sense buffer, len=18: |
---|
150 | 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 |
---|
151 | 10 00 00 |
---|
152 | status=2: sense_key=5 asc=20 ascq=0 |
---|
153 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
154 | [read defect list(10): 37 00 0c 00 00 00 00 00 04 00 ] |
---|
155 | scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8 |
---|
156 | sg_info=0x1 sg_duration=0 milliseconds resid=4 |
---|
157 | Incoming data trimmed to nothing by resid |
---|
158 | >>> Sense buffer, len=18: |
---|
159 | 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 |
---|
160 | 10 00 00 |
---|
161 | status=2: sense_key=5 asc=20 ascq=0 |
---|
162 | Read defect list (10) Failed: unsupported scsi opcode |
---|
163 | Error Counter logging not supported |
---|
164 | |
---|
165 | >>>> do_scsi_cmnd_io: sg_io_ver=3 |
---|
166 | [mode sense(6): 1a 00 0a 00 40 00 ] |
---|
167 | scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8 |
---|
168 | sg_info=0x1 sg_duration=0 milliseconds resid=64 |
---|
169 | Incoming data trimmed to nothing by resid |
---|
170 | >>> Sense buffer, len=18: |
---|
171 | 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 |
---|
172 | 10 00 00 |
---|
173 | status=2: sense_key=5 asc=24 ascq=0 |
---|
174 | Device does not support Self Test logging |
---|
175 | Device does not support Background scan results logging |
---|