Ticket #1399: smartctl-ADATA-IMSS332.txt

File smartctl-ADATA-IMSS332.txt, 10.0 KB (added by phillip_ricado, 4 years ago)

smartctl output

Line 
1smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.19.0-0.bpo.9-amd64] (local build)
2Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: ADATA_IMSS332-128GTP
6Firmware Version: Q0810B
7User Capacity: 128,035,676,160 bytes [128 GB]
8Sector Size: 512 bytes logical/physical
9Rotation Rate: Solid State Device
10Device is: Not in smartctl database [for details use: -P showall]
11ATA Version is: ACS-2 (minor revision not indicated)
12SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
13Local Time is: Tue Nov 24 15:33:53 2020 NZDT
14SMART support is: Available - device has SMART capability.
15SMART support is: Enabled
16AAM feature is: Disabled
17APM feature is: Unavailable
18Rd look-ahead is: Enabled
19Write cache is: Enabled
20ATA Security is: Disabled, frozen [SEC2]
21Wt Cache Reorder: Unknown
22
23=== START OF READ SMART DATA SECTION ===
24SMART overall-health self-assessment test result: PASSED
25
26General SMART Values:
27Offline data collection status: (0x02) Offline data collection activity
28 was completed without error.
29 Auto Offline Data Collection: Disabled.
30Self-test execution status: ( 0) The previous self-test routine completed
31 without error or no self-test has ever
32 been run.
33Total time to complete Offline
34data collection: ( 0) seconds.
35Offline data collection
36capabilities: (0x71) SMART execute Offline immediate.
37 No Auto Offline data collection support.
38 Suspend Offline collection upon new
39 command.
40 No Offline surface scan supported.
41 Self-test supported.
42 Conveyance Self-test supported.
43 Selective Self-test supported.
44SMART capabilities: (0x0002) Does not save SMART data before
45 entering power-saving mode.
46 Supports SMART auto save timer.
47Error logging capability: (0x01) Error logging supported.
48 General Purpose Logging supported.
49Short self-test routine
50recommended polling time: ( 1) minutes.
51Extended self-test routine
52recommended polling time: ( 1) minutes.
53Conveyance self-test routine
54recommended polling time: ( 1) minutes.
55SCT capabilities: (0x003d) SCT Status supported.
56 SCT Error Recovery Control supported.
57 SCT Feature Control supported.
58 SCT Data Table supported.
59
60SMART Attributes Data Structure revision number: 1
61Vendor Specific SMART Attributes with Thresholds:
62ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
63 1 Raw_Read_Error_Rate ------ 100 100 000 - 0
64 5 Reallocated_Sector_Ct ------ 100 100 000 - 0
65 9 Power_On_Hours ------ 100 100 000 - 2
66 12 Power_Cycle_Count ------ 100 100 000 - 7
67160 Unknown_Attribute ------ 100 100 000 - 0
68161 Unknown_Attribute ------ 100 100 000 - 150
69163 Unknown_Attribute ------ 100 100 000 - 15
70164 Unknown_Attribute ------ 100 100 000 - 8761
71165 Unknown_Attribute ------ 100 100 000 - 5
72166 Unknown_Attribute ------ 100 100 000 - 0
73167 Unknown_Attribute ------ 100 100 000 - 4
74168 Unknown_Attribute ------ 100 100 000 - 30000
75169 Unknown_Attribute ------ 100 100 000 - 100
76175 Program_Fail_Count_Chip ------ 100 100 000 - 0
77176 Erase_Fail_Count_Chip ------ 100 100 000 - 0
78177 Wear_Leveling_Count ------ 100 100 050 - 0
79178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0
80181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
81182 Erase_Fail_Count_Total ------ 100 100 000 - 0
82192 Power-Off_Retract_Count ------ 100 100 000 - 3
83194 Temperature_Celsius ------ 100 100 000 - 35
84195 Hardware_ECC_Recovered ------ 100 100 000 - 47
85196 Reallocated_Event_Count ------ 100 100 016 - 0
86197 Current_Pending_Sector ------ 100 100 000 - 0
87198 Offline_Uncorrectable ------ 100 100 000 - 0
88199 UDMA_CRC_Error_Count ------ 100 100 050 - 3
89232 Available_Reservd_Space ------ 100 100 000 - 100
90241 Total_LBAs_Written ------ 100 100 000 - 34238
91242 Total_LBAs_Read ------ 100 100 000 - 33691
92245 Unknown_Attribute ------ 100 100 000 - 17522
93 ||||||_ K auto-keep
94 |||||__ C event count
95 ||||___ R error rate
96 |||____ S speed/performance
97 ||_____ O updated online
98 |______ P prefailure warning
99
100General Purpose Log Directory Version 1
101SMART Log Directory Version 1 [multi-sector log support]
102Address Access R/W Size Description
1030x00 GPL,SL R/O 1 Log Directory
1040x01 GPL,SL R/O 1 Summary SMART error log
1050x02 GPL,SL R/O 1 Comprehensive SMART error log
1060x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
1070x04 GPL,SL R/O 8 Device Statistics log
1080x06 GPL,SL R/O 1 SMART self-test log
1090x07 GPL,SL R/O 1 Extended self-test log
1100x09 GPL,SL R/W 1 Selective self-test log
1110x10 GPL,SL R/O 1 SATA NCQ Queued Error log
1120x11 GPL,SL R/O 1 SATA Phy Event Counters log
1130x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1140x80-0x9f GPL,SL R/W 16 Host vendor specific log
1150xe0 GPL,SL R/W 1 SCT Command/Status
1160xe1 GPL,SL R/W 1 SCT Data Transfer
117
118SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
119No Errors Logged
120
121SMART Extended Self-test Log Version: 1 (1 sectors)
122Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
123# 1 Short offline Completed without error 00% 2 -
124
125SMART Selective self-test log data structure revision number 1
126 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
127 1 0 0 Not_testing
128 2 0 0 Not_testing
129 3 0 0 Not_testing
130 4 0 0 Not_testing
131 5 0 0 Not_testing
132 7 0 65535 Read_scanning was completed without error
133Selective self-test flags (0x0):
134 After scanning selected spans, do NOT read-scan remainder of disk.
135If Selective self-test is pending on power-up, resume after 0 minute delay.
136
137SCT Status Version: 3
138SCT Version (vendor specific): 0 (0x0000)
139SCT Support Level: 0
140Device State: Active (0)
141Current Temperature: 0 Celsius
142Power Cycle Min/Max Temperature: 127/ 0 Celsius
143Lifetime Min/Max Temperature: 0/ 0 Celsius
144Under/Over Temperature Limit Count: 0/0
145
146SCT Temperature History Version: 2
147Temperature Sampling Period: 1 minute
148Temperature Logging Interval: 1 minute
149Min/Max recommended Temperature: 0/100 Celsius
150Min/Max Temperature Limit: 0/100 Celsius
151Temperature History Size (Index): 128 (13)
152
153Index Estimated Time Temperature Celsius
154 14 2020-11-24 13:26 0 -
155 ... ..(112 skipped). .. -
156 127 2020-11-24 15:19 0 -
157 0 2020-11-24 15:20 ? -
158 ... ..( 10 skipped). .. -
159 11 2020-11-24 15:31 ? -
160 12 2020-11-24 15:32 35 ****************
161 13 2020-11-24 15:33 0 -
162
163SCT Error Recovery Control:
164 Read: Disabled
165 Write: Disabled
166
167Device Statistics (GP Log 0x04)
168Page Offset Size Value Flags Description
1690x01 ===== = = === == General Statistics (rev 2) ==
1700x01 0x008 4 7 --- Lifetime Power-On Resets
1710x01 0x010 4 2 --- Power-on Hours
1720x01 0x018 6 2243836326 --- Logical Sectors Written
1730x01 0x020 6 8835871 --- Number of Write Commands
1740x01 0x028 6 2208035528 --- Logical Sectors Read
1750x01 0x030 6 8654773 --- Number of Read Commands
1760x02 ===== = = === == Free-Fall Statistics (empty) ==
1770x03 ===== = = === == Rotating Media Statistics (empty) ==
1780x04 ===== = = === == General Errors Statistics (rev 1) ==
1790x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
1800x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion
1810x05 ===== = = === == Temperature Statistics (empty) ==
1820x06 ===== = = === == Transport Statistics (rev 1) ==
1830x06 0x008 4 23 --- Number of Hardware Resets
1840x06 0x018 4 3 --- Number of Interface CRC Errors
1850x07 ===== = = === == Solid State Device Statistics (rev 1) ==
1860x07 0x008 1 0 --- Percentage Used Endurance Indicator
187 |||_ C monitored condition met
188 ||__ D supports DSN
189 |___ N normalized value
190
191SATA Phy Event Counters (GP Log 0x11)
192ID Size Value Description
1930x0001 2 0 Command failed due to ICRC error
1940x0002 2 0 R_ERR response for data FIS
1950x0003 2 0 R_ERR response for device-to-host data FIS
1960x0004 2 0 R_ERR response for host-to-device data FIS
1970x0005 2 0 R_ERR response for non-data FIS
1980x0006 2 0 R_ERR response for device-to-host non-data FIS
1990x0007 2 0 R_ERR response for host-to-device non-data FIS
2000x0008 2 0 Device-to-host non-data FIS retries
2010x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
2020x000a 2 20 Device-to-host register FISes sent due to a COMRESET
2030x000b 2 0 CRC errors within host-to-device FIS
2040x000d 2 0 Non-CRC errors within host-to-device FIS
2050x000f 2 0 R_ERR response for host-to-device data FIS, CRC
2060x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
2070x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
2080x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
209