1 | smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-STABLE amd64] (local build)
|
---|
2 | Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: ADATA SU650NS38
|
---|
6 | Serial Number: 2K352L1S5AJW
|
---|
7 | LU WWN Device Id: 5 000000 000000000
|
---|
8 | Firmware Version: P191202a
|
---|
9 | User Capacity: 120,034,123,776 bytes [120 GB]
|
---|
10 | Sector Size: 512 bytes logical/physical
|
---|
11 | Rotation Rate: Solid State Device
|
---|
12 | Form Factor: 2.5 inches
|
---|
13 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
14 | ATA Version is: ACS-2 (minor revision not indicated)
|
---|
15 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
16 | Local Time is: Fri Oct 23 08:33:27 2020 EDT
|
---|
17 | SMART support is: Available - device has SMART capability.
|
---|
18 | SMART support is: Enabled
|
---|
19 | AAM feature is: Unavailable
|
---|
20 | APM feature is: Unavailable
|
---|
21 | Rd look-ahead is: Enabled
|
---|
22 | Write cache is: Enabled
|
---|
23 | DSN feature is: Unavailable
|
---|
24 | ATA Security is: Disabled, frozen [SEC2]
|
---|
25 | Wt Cache Reorder: Enabled
|
---|
26 |
|
---|
27 | === START OF READ SMART DATA SECTION ===
|
---|
28 | SMART overall-health self-assessment test result: PASSED
|
---|
29 |
|
---|
30 | General SMART Values:
|
---|
31 | Offline data collection status: (0x02) Offline data collection activity
|
---|
32 | was completed without error.
|
---|
33 | Auto Offline Data Collection: Disabled.
|
---|
34 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
35 | without error or no self-test has ever
|
---|
36 | been run.
|
---|
37 | Total time to complete Offline
|
---|
38 | data collection: ( 33) seconds.
|
---|
39 | Offline data collection
|
---|
40 | capabilities: (0x7b) SMART execute Offline immediate.
|
---|
41 | Auto Offline data collection on/off support.
|
---|
42 | Suspend Offline collection upon new
|
---|
43 | command.
|
---|
44 | Offline surface scan supported.
|
---|
45 | Self-test supported.
|
---|
46 | Conveyance Self-test supported.
|
---|
47 | Selective Self-test supported.
|
---|
48 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
49 | power-saving mode.
|
---|
50 | Supports SMART auto save timer.
|
---|
51 | Error logging capability: (0x01) Error logging supported.
|
---|
52 | General Purpose Logging supported.
|
---|
53 | Short self-test routine
|
---|
54 | recommended polling time: ( 2) minutes.
|
---|
55 | Extended self-test routine
|
---|
56 | recommended polling time: ( 2) minutes.
|
---|
57 | Conveyance self-test routine
|
---|
58 | recommended polling time: ( 2) minutes.
|
---|
59 | SCT capabilities: (0x0031) SCT Status supported.
|
---|
60 | SCT Feature Control supported.
|
---|
61 | SCT Data Table supported.
|
---|
62 |
|
---|
63 | SMART Attributes Data Structure revision number: 0
|
---|
64 | Vendor Specific SMART Attributes with Thresholds:
|
---|
65 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
66 | 9 Power_On_Hours -O--C- 100 100 000 - 47
|
---|
67 | 12 Power_Cycle_Count -O--C- 100 100 000 - 5
|
---|
68 | 167 Unknown_Attribute -O---K 100 100 000 - 0
|
---|
69 | 168 Unknown_Attribute -O--C- 100 100 000 - 0
|
---|
70 | 169 Unknown_Attribute PO--C- 083 083 010 - 5636139
|
---|
71 | 173 Unknown_Attribute -O--C- 200 200 000 - 17180196868
|
---|
72 | 175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
|
---|
73 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 020 - 444
|
---|
74 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 5
|
---|
75 | 194 Temperature_Celsius -O---K 061 061 030 - 39 (Min/Max 15/47)
|
---|
76 | 231 Unknown_SSD_Attribute PO--CK 100 100 005 - 0
|
---|
77 | 233 Media_Wearout_Indicator -O--CK 100 100 000 - 312642560
|
---|
78 | 234 Unknown_Attribute -O--CK 100 100 000 - 86365312
|
---|
79 | 241 Total_LBAs_Written -O--CK 100 100 000 - 255160266
|
---|
80 | 242 Total_LBAs_Read -O--CK 100 100 000 - 215015835
|
---|
81 | ||||||_ K auto-keep
|
---|
82 | |||||__ C event count
|
---|
83 | ||||___ R error rate
|
---|
84 | |||____ S speed/performance
|
---|
85 | ||_____ O updated online
|
---|
86 | |______ P prefailure warning
|
---|
87 |
|
---|
88 | General Purpose Log Directory Version 1
|
---|
89 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
90 | Address Access R/W Size Description
|
---|
91 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
92 | 0x01 SL R/O 1 Summary SMART error log
|
---|
93 | 0x02 SL R/O 51 Comprehensive SMART error log
|
---|
94 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
---|
95 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
96 | 0x06 SL R/O 1 SMART self-test log
|
---|
97 | 0x07 GPL R/O 1 Extended self-test log
|
---|
98 | 0x09 SL R/W 1 Selective self-test log
|
---|
99 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
100 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
101 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
102 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
103 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
104 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
105 |
|
---|
106 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
---|
107 | No Errors Logged
|
---|
108 |
|
---|
109 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
110 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
111 | # 1 Short offline Completed without error 00% 47 -
|
---|
112 |
|
---|
113 | SMART Selective self-test log data structure revision number 1
|
---|
114 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
115 | 1 0 0 Not_testing
|
---|
116 | 2 0 0 Not_testing
|
---|
117 | 3 0 0 Not_testing
|
---|
118 | 4 0 0 Not_testing
|
---|
119 | 5 0 0 Not_testing
|
---|
120 | Selective self-test flags (0x0):
|
---|
121 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
122 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
123 |
|
---|
124 | SCT Status Version: 3
|
---|
125 | SCT Version (vendor specific): 1 (0x0001)
|
---|
126 | Device State: Active (0)
|
---|
127 | Current Temperature: 40 Celsius
|
---|
128 | Power Cycle Min/Max Temperature: ?/40 Celsius
|
---|
129 | Lifetime Min/Max Temperature: ?/ ? Celsius
|
---|
130 | Under/Over Temperature Limit Count: 0/0
|
---|
131 |
|
---|
132 | SCT Temperature History Version: 2
|
---|
133 | Temperature Sampling Period: 1 minute
|
---|
134 | Temperature Logging Interval: 1 minute
|
---|
135 | Min/Max recommended Temperature: -127/127 Celsius
|
---|
136 | Min/Max Temperature Limit: -127/127 Celsius
|
---|
137 | Temperature History Size (Index): 478 (425)
|
---|
138 |
|
---|
139 | Index Estimated Time Temperature Celsius
|
---|
140 | 426 2020-10-23 00:36 39 ********************
|
---|
141 | 427 2020-10-23 00:37 40 *********************
|
---|
142 | 428 2020-10-23 00:38 39 ********************
|
---|
143 | 429 2020-10-23 00:39 40 *********************
|
---|
144 | 430 2020-10-23 00:40 39 ********************
|
---|
145 | ... ..( 3 skipped). .. ********************
|
---|
146 | 434 2020-10-23 00:44 39 ********************
|
---|
147 | 435 2020-10-23 00:45 40 *********************
|
---|
148 | 436 2020-10-23 00:46 40 *********************
|
---|
149 | 437 2020-10-23 00:47 40 *********************
|
---|
150 | 438 2020-10-23 00:48 39 ********************
|
---|
151 | 439 2020-10-23 00:49 39 ********************
|
---|
152 | 440 2020-10-23 00:50 40 *********************
|
---|
153 | 441 2020-10-23 00:51 40 *********************
|
---|
154 | 442 2020-10-23 00:52 39 ********************
|
---|
155 | Device Statistics (GP Log 0x04)
|
---|
156 | Page Offset Size Value Flags Description
|
---|
157 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
---|
158 | 0x01 0x008 4 5 --- Lifetime Power-On Resets
|
---|
159 | 0x01 0x010 4 47 --- Power-on Hours
|
---|
160 | 0x01 0x018 6 255160266 --- Logical Sectors Written
|
---|
161 | 0x01 0x020 6 1424007 --- Number of Write Commands
|
---|
162 | 0x01 0x028 6 215015835 --- Logical Sectors Read
|
---|
163 | 0x01 0x030 6 851762 --- Number of Read Commands
|
---|
164 | 0x01 0x038 6 43120211460 --- Date and Time TimeStamp
|
---|
165 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
166 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
---|
167 | |||_ C monitored condition met
|
---|
168 | ||__ D supports DSN
|
---|
169 | |___ N normalized value
|
---|
170 |
|
---|
171 | Pending Defects log (GP Log 0x0c) not supported
|
---|
172 |
|
---|
173 | SATA Phy Event Counters (GP Log 0x11)
|
---|
174 | ID Size Value Description
|
---|
175 | 0x0001 2 0 Command failed due to ICRC error
|
---|
176 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
177 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
178 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
179 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
180 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
181 | 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
182 | 0x000a 4 14 Device-to-host register FISes sent due to a COMRESET
|
---|
183 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
184 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
185 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
186 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|