Ticket #1384: smartctl-SAMSUNG-MZYLN256HCHP-000L2.txt

File smartctl-SAMSUNG-MZYLN256HCHP-000L2.txt, 8.2 KB (added by Andrius, 3 years ago)

Report with missing attributes

Line 
1smartctl 7.1 2019-12-30 r5022 [x86_64-w64-mingw32-w10-1909] (sf-7.1-1)
2Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: SAMSUNG MZYLN256HCHP-000L2
6Firmware Version: EMT63L0Q
7User Capacity: 256 060 514 304 bytes [256 GB]
8Sector Size: 512 bytes logical/physical
9Rotation Rate: Solid State Device
10Device is: Not in smartctl database [for details use: -P showall]
11ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
12SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
13Local Time is: Fri Oct 23 10:37:42 2020 FLEDT
14SMART support is: Available - device has SMART capability.
15SMART support is: Enabled
16AAM feature is: Unavailable
17APM feature is: Unavailable
18Rd look-ahead is: Enabled
19Write cache is: Enabled
20DSN feature is: Unavailable
21ATA Security is: Disabled, NOT FROZEN [SEC1]
22Wt Cache Reorder: Enabled
23
24=== START OF READ SMART DATA SECTION ===
25SMART overall-health self-assessment test result: PASSED
26
27General SMART Values:
28Offline data collection status: (0x80) Offline data collection activity
29 was never started.
30 Auto Offline Data Collection: Enabled.
31Self-test execution status: ( 0) The previous self-test routine completed
32 without error or no self-test has ever
33 been run.
34Total time to complete Offline
35data collection: ( 0) seconds.
36Offline data collection
37capabilities: (0x53) SMART execute Offline immediate.
38 Auto Offline data collection on/off support.
39 Suspend Offline collection upon new
40 command.
41 No Offline surface scan supported.
42 Self-test supported.
43 No Conveyance Self-test supported.
44 Selective Self-test supported.
45SMART capabilities: (0x0003) Saves SMART data before entering
46 power-saving mode.
47 Supports SMART auto save timer.
48Error logging capability: (0x01) Error logging supported.
49 General Purpose Logging supported.
50Short self-test routine
51recommended polling time: ( 2) minutes.
52Extended self-test routine
53recommended polling time: ( 133) minutes.
54SCT capabilities: (0x003d) SCT Status supported.
55 SCT Error Recovery Control supported.
56 SCT Feature Control supported.
57 SCT Data Table supported.
58
59SMART Attributes Data Structure revision number: 1
60Vendor Specific SMART Attributes with Thresholds:
61ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
62 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
63 9 Power_On_Hours -O--CK 099 099 000 - 3947
64 12 Power_Cycle_Count -O--CK 097 097 000 - 2031
65170 Unknown_Attribute -O--CK 100 100 010 - 0
66171 Unknown_Attribute -O--CK 100 100 010 - 0
67172 Unknown_Attribute -O--CK 100 100 010 - 0
68173 Unknown_Attribute PO--CK 095 095 005 - 99
69174 Unknown_Attribute -O--CK 099 099 000 - 44
70178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0
71180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 769
72184 End-to-End_Error PO--CK 100 100 097 - 0
73187 Reported_Uncorrect -O--CK 100 100 000 - 0
74194 Temperature_Celsius -O--CK 065 054 000 - 35
75199 UDMA_CRC_Error_Count -OSRCK 099 099 000 - 1
76233 Media_Wearout_Indicator PO--C- 095 095 000 - 15946742
77241 Total_LBAs_Written -O--CK 099 099 000 - 13143
78242 Total_LBAs_Read -O--CK 099 099 000 - 17816
79249 Unknown_Attribute -O--CK 099 099 000 - 25344
80 ||||||_ K auto-keep
81 |||||__ C event count
82 ||||___ R error rate
83 |||____ S speed/performance
84 ||_____ O updated online
85 |______ P prefailure warning
86
87General Purpose Log Directory Version 1
88SMART Log Directory Version 1 [multi-sector log support]
89Address Access R/W Size Description
900x00 GPL,SL R/O 1 Log Directory
910x01 SL R/O 1 Summary SMART error log
920x02 SL R/O 1 Comprehensive SMART error log
930x03 GPL R/O 1 Ext. Comprehensive SMART error log
940x06 SL R/O 1 SMART self-test log
950x07 GPL R/O 1 Extended self-test log
960x09 SL R/W 1 Selective self-test log
970x10 GPL R/O 1 NCQ Command Error log
980x11 GPL R/O 1 SATA Phy Event Counters log
990x13 GPL R/O 1 SATA NCQ Send and Receive log
1000x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1010x80-0x9f GPL,SL R/W 16 Host vendor specific log
1020xdf GPL,SL VS 1 Device vendor specific log
1030xe0 GPL,SL R/W 1 SCT Command/Status
1040xe1 GPL,SL R/W 1 SCT Data Transfer
105
106SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
107No Errors Logged
108
109SMART Extended Self-test Log Version: 1 (1 sectors)
110No self-tests have been logged. [To run self-tests, use: smartctl -t]
111
112Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
113SMART Selective self-test log data structure revision number 1
114 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
115 1 0 0 Not_testing
116 2 0 0 Not_testing
117 3 0 0 Not_testing
118 4 0 0 Not_testing
119 5 0 0 Not_testing
120 255 0 65535 Read_scanning was never started
121Selective self-test flags (0x0):
122 After scanning selected spans, do NOT read-scan remainder of disk.
123If Selective self-test is pending on power-up, resume after 0 minute delay.
124
125SCT Status Version: 3
126SCT Version (vendor specific): 256 (0x0100)
127Device State: SCT command executing in background (5)
128Current Temperature: 35 Celsius
129Power Cycle Min/Max Temperature: 30/40 Celsius
130Lifetime Min/Max Temperature: 0/70 Celsius
131Under/Over Temperature Limit Count: 4294967295/4294901760
132SMART Status: 0xffff (Reserved)
133
134SCT Temperature History Version: 3 (Unknown, should be 2)
135Temperature Sampling Period: 1 minute
136Temperature Logging Interval: 10 minutes
137Min/Max recommended Temperature: 0/70 Celsius
138Min/Max Temperature Limit: 0/70 Celsius
139Temperature History Size (Index): 128 (4)
140
141Index Estimated Time Temperature Celsius
142 5 2020-10-22 13:20 ? -
143 ... ..(121 skipped). .. -
144 127 2020-10-23 09:40 ? -
145 0 2020-10-23 09:50 40 *********************
146 1 2020-10-23 10:00 30 ***********
147 2 2020-10-23 10:10 32 *************
148 3 2020-10-23 10:20 33 **************
149 4 2020-10-23 10:30 35 ****************
150
151SCT Error Recovery Control:
152 Read: Disabled
153 Write: Disabled
154
155Device Statistics (GP/SMART Log 0x04) not supported
156
157Pending Defects log (GP Log 0x0c) not supported
158
159SATA Phy Event Counters (GP Log 0x11)
160ID Size Value Description
1610x0001 2 0 Command failed due to ICRC error
1620x0002 2 0 R_ERR response for data FIS
1630x0003 2 0 R_ERR response for device-to-host data FIS
1640x0004 2 0 R_ERR response for host-to-device data FIS
1650x0005 2 0 R_ERR response for non-data FIS
1660x0006 2 0 R_ERR response for device-to-host non-data FIS
1670x0007 2 0 R_ERR response for host-to-device non-data FIS
1680x0008 2 0 Device-to-host non-data FIS retries
1690x0009 2 6727 Transition from drive PhyRdy to drive PhyNRdy
1700x000a 2 1 Device-to-host register FISes sent due to a COMRESET
1710x000b 2 0 CRC errors within host-to-device FIS
1720x000d 2 0 Non-CRC errors within host-to-device FIS
1730x000f 2 0 R_ERR response for host-to-device data FIS, CRC
1740x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
1750x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
1760x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
177