Ticket #137: dmesg.txt

300)
[   10.525300] ata6: SATA link down (SStatus 0 SControl 300)
[   10.527316] ata5: SATA link down (SStatus 0 SControl 300)
[   10.527638] ata3.00: configured for UDMA/100
[   10.529292] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.531291] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.532048] ata1.00: configured for UDMA/133
[   10.540268] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   10.541589] ata2.00: configured for UDMA/133
[   10.755818] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   10.756781] hub 2-1:1.0: hub_port_status failed (err = -32)
[   10.757031] hub 2-1:1.0: hub_port_status failed (err = -32)
[   10.942529] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.030341] PM: restore of devices complete after 822.771 msecs
[   11.040050] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.040052] Restarting tasks ... done.
[   11.337901] PM: Basic memory bitmaps freed
[   13.328299] ata1.00: configured for UDMA/133
[   13.328303] ata1: EH complete
[   13.411415] ata2.00: configured for UDMA/133
[   13.411424] ata2: EH complete
[   13.727532] ata1.00: configured for UDMA/133
[   13.727536] ata1: EH complete
[   14.083089] ata2.00: configured for UDMA/133
[   14.083097] ata2: EH complete
[ 7112.481492] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7112.481500] ata1.00: failed command: SMART
[ 7112.481509] ata1.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[ 7112.481511]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 7112.481515] ata1.00: status: { DRDY }
[ 7112.481522] ata1: hard resetting link
[ 7112.785794] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7112.786311] ata1.00: configured for UDMA/133
[ 7112.786333] ata1: EH complete
[ 7153.647811] r8169 0000:01:00.0: eth0: link down
[ 7155.960760] r8169 0000:01:00.0: eth0: link up
[18038.930588] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[18038.930597] ata1.00: failed command: SMART
[18038.930606] ata1.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[18038.930608]          res 40/00:04:80:cd:b3/00:00:05:00:00/40 Emask 0x4 (timeout)
[18038.930613] ata1.00: status: { DRDY }
[18038.930619] ata1: hard resetting link
[18039.234710] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18039.235427] ata1.00: configured for UDMA/133
[18039.235446] ata1: EH complete
[18059.892334] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[18059.892341] ata1.00: failed command: SMART
[18059.892350] ata1.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[18059.892352]          res 40/00:04:80:cd:b3/00:00:05:00:00/40 Emask 0x4 (timeout)
[18059.892357] ata1.00: status: { DRDY }
[18059.892363] ata1: hard resetting link
[18060.196645] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18060.197318] ata1.00: configured for UDMA/133
[18060.197339] ata1: EH complete
[20433.369525] npviewer.bin[23247]: segfault at f596504c ip 00000000f60e0dc7 sp 00000000ffd40c00 error 4 in libflashplayer.so[f5d42000+b2c000]
[22147.211994] ata1.00: configured for UDMA/133
[22147.212002] ata1: EH complete
[22147.651706] ata2.00: configured for UDMA/133
[22147.651711] ata2: EH complete
[22148.473301] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[22148.473305] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[22148.474010] PM: Basic memory bitmaps created
[22149.754681] Syncing filesystems ... done.
[22149.829163] Freezing user space processes ... (elapsed 0.01 seconds) done.
[22149.839994] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[22149.854104] PM: Preallocating image memory... done (allocated 555947 pages)
[22150.643646] PM: Allocated 2223788 kbytes in 0.79 seconds (2814.92 MB/s)
[22150.643647] Suspending console(s) (use no_console_suspend to debug)
[22150.643940] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[22150.644557] parport_pc 00:08: disabled
[22150.644869] serial 00:07: disabled
[22150.645183] serial 00:06: disabled
[22150.843652] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[22150.846700] HDA Intel 0000:00:1b.0: PCI INT A disabled
[22150.846724] ACPI handle has no context!
[22150.909636] PM: freeze of devices complete after 266.432 msecs
[22150.909870] PM: late freeze of devices complete after 0.231 msecs
[22150.910140] ACPI: Preparing to enter system sleep state S4
[22150.910990] PM: Saving platform NVS memory
[22150.914519] Disabling non-boot CPUs ...
[22150.931797] CPU 1 is now offline
[22150.947657] CPU 2 is now offline
[22150.963501] CPU 3 is now offline
[22150.963503] SMP alternatives: switching to UP code
[22150.967711] PM: Creating hibernation image:
[22151.013683] PM: Need to copy 431084 pages
[22151.013685] PM: Normal pages needed: 431084 + 1024, available pages: 565969
[   10.366130] PM: Restoring platform NVS memory
[   10.369577] Enabling non-boot CPUs ...
[   10.372394] SMP alternatives: switching to SMP code
[   10.375952] Booting Node 0 Processor 1 APIC 0x4
[   10.471428] CPU1 is up
[   10.471670] Booting Node 0 Processor 2 APIC 0x1
[   10.574426] CPU2 is up
[   10.574752] Booting Node 0 Processor 3 APIC 0x5
[   10.678309] CPU3 is up
[   10.679459] ACPI: Waking up from system sleep state S4
[   10.680001] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.680147] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.680220] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.680287] PM: early restore of devices complete after 0.424 msecs
[   10.763974] i915 0000:00:02.0: setting latency timer to 64
[   10.764000] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.764013] usb usb1: root hub lost power or was reset
[   10.767934] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.767959] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.767964] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.767978] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.767986] usb usb2: root hub lost power or was reset
[   10.771917] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.771920] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.771931] pci 0000:00:1e.0: setting latency timer to 64
[   10.771963] ahci 0000:00:1f.2: setting latency timer to 64
[   10.772361] sd 0:0:0:0: [sda] Starting disk
[   10.772438] sd 1:0:0:0: [sdb] Starting disk
[   10.774756] serial 00:06: activated
[   10.775426] r8169 0000:01:00.0: eth0: link up
[   10.776783] serial 00:07: activated
[   10.779152] parport_pc 00:08: activated
[   11.075823] ata4: SATA link down (SStatus 0 SControl 300)
[   11.078796] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.079755] ata5: SATA link down (SStatus 0 SControl 300)
[   11.081827] ata6: SATA link down (SStatus 0 SControl 300)
[   11.082159] ata3.00: configured for UDMA/100
[   11.083741] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.087774] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.088452] ata1.00: configured for UDMA/133
[   11.094687] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.116142] ata2.00: configured for UDMA/133
[   11.310283] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.311283] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.311529] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.497052] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.585888] PM: restore of devices complete after 823.839 msecs
[   11.595592] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.595594] Restarting tasks ... done.
[   11.963787] PM: Basic memory bitmaps freed
[   13.923028] ata1.00: configured for UDMA/133
[   13.923033] ata1: EH complete
[   14.312319] ata2.00: configured for UDMA/133
[   14.312324] ata2: EH complete
[   14.759797] ata1.00: configured for UDMA/133
[   14.759801] ata1: EH complete
[   14.874132] ata2.00: configured for UDMA/133
[   14.874142] ata2: EH complete
[ 1504.563154] ata1.00: configured for UDMA/133
[ 1504.563158] ata1: EH complete
[ 1504.951363] ata2.00: configured for UDMA/133
[ 1504.951371] ata2: EH complete
[ 1506.175931] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1506.175935] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 1506.176595] PM: Basic memory bitmaps created
[ 1507.411462] Syncing filesystems ... done.
[ 1507.474014] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1507.484755] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1507.498856] PM: Preallocating image memory... done (allocated 555949 pages)
[ 1507.790415] PM: Allocated 2223796 kbytes in 0.29 seconds (7668.26 MB/s)
[ 1507.790417] Suspending console(s) (use no_console_suspend to debug)
[ 1507.790703] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1507.790748] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1507.791138] parport_pc 00:08: disabled
[ 1507.791405] serial 00:07: disabled
[ 1507.791667] serial 00:06: disabled
[ 1507.892875] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1507.892899] ACPI handle has no context!
[ 1507.903793] PM: freeze of devices complete after 113.480 msecs
[ 1507.904017] PM: late freeze of devices complete after 0.220 msecs
[ 1507.904332] ACPI: Preparing to enter system sleep state S4
[ 1507.905168] PM: Saving platform NVS memory
[ 1507.908697] Disabling non-boot CPUs ...
[ 1507.922155] CPU 1 is now offline
[ 1507.938077] CPU 2 is now offline
[ 1507.953781] CPU 3 is now offline
[ 1507.953782] SMP alternatives: switching to UP code
[ 1507.958159] PM: Creating hibernation image:
[ 1508.002357] PM: Need to copy 431325 pages
[ 1508.002360] PM: Normal pages needed: 431325 + 1024, available pages: 565728
[   10.573112] PM: Restoring platform NVS memory
[   10.576557] Enabling non-boot CPUs ...
[   10.579216] SMP alternatives: switching to SMP code
[   10.582776] Booting Node 0 Processor 1 APIC 0x4
[   10.678262] CPU1 is up
[   10.678514] Booting Node 0 Processor 2 APIC 0x1
[   10.781244] CPU2 is up
[   10.781566] Booting Node 0 Processor 3 APIC 0x5
[   10.885121] CPU3 is up
[   10.886248] ACPI: Waking up from system sleep state S4
[   10.886784] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.886930] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.887003] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.887070] PM: early restore of devices complete after 0.425 msecs
[   10.975918] i915 0000:00:02.0: setting latency timer to 64
[   10.975966] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.975981] usb usb1: root hub lost power or was reset
[   10.979894] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.979898] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.979926] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.979929] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.979934] usb usb2: root hub lost power or was reset
[   10.983843] pci 0000:00:1e.0: setting latency timer to 64
[   10.983848] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.983853] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.983903] ahci 0000:00:1f.2: setting latency timer to 64
[   10.984685] sd 0:0:0:0: [sda] Starting disk
[   10.984773] sd 1:0:0:0: [sdb] Starting disk
[   10.987208] serial 00:06: activated
[   10.987356] r8169 0000:01:00.0: eth0: link up
[   10.989139] serial 00:07: activated
[   10.991469] parport_pc 00:08: activated
[   11.287619] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.288387] ata1.00: configured for UDMA/133
[   11.289546] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.291592] ata5: SATA link down (SStatus 0 SControl 300)
[   11.292835] ata3.00: configured for UDMA/100
[   11.293528] ata6: SATA link down (SStatus 0 SControl 300)
[   11.295521] ata4: SATA link down (SStatus 0 SControl 300)
[   11.297548] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.306500] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.329733] ata2.00: configured for UDMA/133
[   11.522018] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.523106] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.523355] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.708855] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.797710] PM: restore of devices complete after 823.760 msecs
[   11.807354] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.807358] Restarting tasks ... done.
[   12.109430] PM: Basic memory bitmaps freed
[   14.105540] ata1.00: configured for UDMA/133
[   14.105545] ata1: EH complete
[   14.215232] ata2.00: configured for UDMA/133
[   14.215238] ata2: EH complete
[   14.646972] ata1.00: configured for UDMA/133
[   14.646976] ata1: EH complete
[   15.041492] ata2.00: configured for UDMA/133
[   15.041497] ata2: EH complete
[  456.818394] r8169 0000:01:00.0: eth0: link down
[  459.203106] r8169 0000:01:00.0: eth0: link up
[ 4794.638956] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 4794.638965] ata1.00: failed command: SMART
[ 4794.638974] ata1.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[ 4794.638976]          res 40/00:3c:68:f7:96/00:00:03:00:00/40 Emask 0x4 (timeout)
[ 4794.638980] ata1.00: status: { DRDY }
[ 4794.638986] ata1: hard resetting link
[ 4794.943324] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4794.943998] ata1.00: configured for UDMA/133
[ 4794.944021] ata1: EH complete
[ 4815.591839] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 4815.591847] ata1.00: failed command: SMART
[ 4815.591856] ata1.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[ 4815.591858]          res 40/00:3c:68:f7:96/00:00:03:00:00/40 Emask 0x4 (timeout)
[ 4815.591863] ata1.00: status: { DRDY }
[ 4815.591869] ata1: hard resetting link
[ 4815.896152] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4815.896664] ata1.00: configured for UDMA/133
[ 4815.896682] ata1: EH complete
[10608.638271] npviewer.bin[17290]: segfault at f57cf04c ip 00000000f60f2dc7 sp 00000000ff996890 error 4 in libflashplayer.so[f5d54000+b2c000]
[11504.954802] npviewer.bin[16609]: segfault at f57ce04c ip 00000000f60f1dc7 sp 00000000ffded5c0 error 4 in libflashplayer.so[f5d53000+b2c000]
[17677.164423] npviewer.bin[19487]: segfault at 418 ip 00000000f5fc5b66 sp 00000000ffd6e6b8 error 6 in libflashplayer.so[f5d77000+b2c000]
[25091.502976] ata1.00: configured for UDMA/133
[25091.502983] ata1: EH complete
[25091.858231] ata2.00: configured for UDMA/133
[25091.858237] ata2: EH complete
[25092.752461] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[25092.752465] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[25092.753124] PM: Basic memory bitmaps created
[25094.041094] Syncing filesystems ... done.
[25094.125556] Freezing user space processes ... (elapsed 0.01 seconds) done.
[25094.136436] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[25094.150634] PM: Preallocating image memory... done (allocated 555949 pages)
[25096.556089] PM: Allocated 2223796 kbytes in 2.41 seconds (922.73 MB/s)
[25096.556091] Suspending console(s) (use no_console_suspend to debug)
[25096.556710] parport_pc 00:08: disabled
[25096.557042] serial 00:07: disabled
[25096.557321] serial 00:06: disabled
[25096.557433] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[25096.757540] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[25096.759563] HDA Intel 0000:00:1b.0: PCI INT A disabled
[25096.759588] ACPI handle has no context!
[25096.824489] PM: freeze of devices complete after 268.849 msecs
[25096.824728] PM: late freeze of devices complete after 0.237 msecs
[25096.824996] ACPI: Preparing to enter system sleep state S4
[25096.825823] PM: Saving platform NVS memory
[25096.829334] Disabling non-boot CPUs ...
[25096.838962] CPU 1 is now offline
[25096.862756] CPU 2 is now offline
[25096.878351] CPU 3 is now offline
[25096.878353] SMP alternatives: switching to UP code
[25096.882614] PM: Creating hibernation image:
[25096.929015] PM: Need to copy 432185 pages
[25096.929017] PM: Normal pages needed: 432185 + 1024, available pages: 564868
[   10.741607] PM: Restoring platform NVS memory
[   10.745053] Enabling non-boot CPUs ...
[   10.747824] SMP alternatives: switching to SMP code
[   10.751385] Booting Node 0 Processor 1 APIC 0x4
[   10.845863] CPU1 is up
[   10.846109] Booting Node 0 Processor 2 APIC 0x1
[   10.948863] CPU2 is up
[   10.949185] Booting Node 0 Processor 3 APIC 0x5
[   11.052736] CPU3 is up
[   11.053867] ACPI: Waking up from system sleep state S4
[   11.054406] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.054551] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.054625] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.054691] PM: early restore of devices complete after 0.423 msecs
[   11.140025] i915 0000:00:02.0: setting latency timer to 64
[   11.149854] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.149867] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.149868] usb usb1: root hub lost power or was reset
[   11.149872] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.153802] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.153837] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.153878] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.153886] usb usb2: root hub lost power or was reset
[   11.157820] pci 0000:00:1e.0: setting latency timer to 64
[   11.157821] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.157852] ahci 0000:00:1f.2: setting latency timer to 64
[   11.158252] sd 0:0:0:0: [sda] Starting disk
[   11.158351] sd 1:0:0:0: [sdb] Starting disk
[   11.160655] serial 00:06: activated
[   11.161950] r8169 0000:01:00.0: eth0: link up
[   11.163690] serial 00:07: activated
[   11.174952] parport_pc 00:08: activated
[   11.466130] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.468186] ata5: SATA link down (SStatus 0 SControl 300)
[   11.469454] ata3.00: configured for UDMA/100
[   11.470180] ata6: SATA link down (SStatus 0 SControl 300)
[   11.472179] ata4: SATA link down (SStatus 0 SControl 300)
[   11.481101] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.696605] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.697685] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.697941] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.879196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.879774] ata1.00: configured for UDMA/133
[   11.881190] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.883366] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.893204] ata2.00: configured for UDMA/133
[   11.971388] PM: restore of devices complete after 833.301 msecs
[   11.981380] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.981383] Restarting tasks ... done.
[   12.612679] PM: Basic memory bitmaps freed
[   14.571346] ata1.00: configured for UDMA/133
[   14.571350] ata1: EH complete
[   14.927925] ata2.00: configured for UDMA/133
[   14.927936] ata2: EH complete
[   15.278720] ata1.00: configured for UDMA/133
[   15.278724] ata1: EH complete
[   15.357736] ata2.00: configured for UDMA/133
[   15.357744] ata2: EH complete
[  255.626664] ata1.00: configured for UDMA/133
[  255.626668] ata1: EH complete
[  255.979190] ata2.00: configured for UDMA/133
[  255.979199] ata2: EH complete
[  256.670353] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[  256.670357] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[  256.671051] PM: Basic memory bitmaps created
[  257.920164] Syncing filesystems ... done.
[  257.990524] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  258.001455] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  258.015530] PM: Preallocating image memory... done (allocated 555949 pages)
[  258.310583] PM: Allocated 2223796 kbytes in 0.29 seconds (7668.26 MB/s)
[  258.310585] Suspending console(s) (use no_console_suspend to debug)
[  258.310879] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[  258.310922] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  258.311293] parport_pc 00:08: disabled
[  258.311564] serial 00:07: disabled
[  258.312033] serial 00:06: disabled
[  258.413522] HDA Intel 0000:00:1b.0: PCI INT A disabled
[  258.413546] ACPI handle has no context!
[  258.424416] PM: freeze of devices complete after 113.933 msecs
[  258.424647] PM: late freeze of devices complete after 0.228 msecs
[  258.424958] ACPI: Preparing to enter system sleep state S4
[  258.425800] PM: Saving platform NVS memory
[  258.429314] Disabling non-boot CPUs ...
[  258.442785] CPU 1 is now offline
[  258.458705] CPU 2 is now offline
[  258.474403] CPU 3 is now offline
[  258.474405] SMP alternatives: switching to UP code
[  258.478711] PM: Creating hibernation image:
[  258.524111] PM: Need to copy 431409 pages
[  258.524113] PM: Normal pages needed: 431409 + 1024, available pages: 565644
[   10.437271] PM: Restoring platform NVS memory
[   10.440715] Enabling non-boot CPUs ...
[   10.443445] SMP alternatives: switching to SMP code
[   10.447007] Booting Node 0 Processor 1 APIC 0x4
[   10.542486] CPU1 is up
[   10.542735] Booting Node 0 Processor 2 APIC 0x1
[   10.645469] CPU2 is up
[   10.645801] Booting Node 0 Processor 3 APIC 0x5
[   10.749352] CPU3 is up
[   10.750487] ACPI: Waking up from system sleep state S4
[   10.750958] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[   10.751024] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.751170] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.751243] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.751310] PM: early restore of devices complete after 0.429 msecs
[   10.839353] i915 0000:00:02.0: setting latency timer to 64
[   10.839396] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.839410] usb usb1: root hub lost power or was reset
[   10.843350] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.843353] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.843357] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.843391] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.843463] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.843471] usb usb2: root hub lost power or was reset
[   10.847396] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.847420] pci 0000:00:1e.0: setting latency timer to 64
[   10.847494] ahci 0000:00:1f.2: setting latency timer to 64
[   10.848323] sd 0:0:0:0: [sda] Starting disk
[   10.848409] sd 1:0:0:0: [sdb] Starting disk
[   10.850890] serial 00:06: activated
[   10.851637] r8169 0000:01:00.0: eth0: link up
[   10.852961] serial 00:07: activated
[   10.862875] parport_pc 00:08: activated
[   11.151830] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.154762] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.155157] ata3.00: configured for UDMA/100
[   11.155384] ata1.00: configured for UDMA/133
[   11.155757] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.157756] ata4: SATA link down (SStatus 0 SControl 300)
[   11.159748] ata5: SATA link down (SStatus 0 SControl 300)
[   11.161739] ata6: SATA link down (SStatus 0 SControl 300)
[   11.167939] ata2.00: configured for UDMA/133
[   11.170795] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.386323] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.602689] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.602938] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.776504] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.864680] PM: restore of devices complete after 1027.742 msecs
[   11.874202] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.874204] Restarting tasks ... done.
[   12.189998] PM: Basic memory bitmaps freed
[   13.994189] ata1.00: configured for UDMA/133
[   13.994194] ata1: EH complete
[   14.074245] ata2.00: configured for UDMA/133
[   14.074252] ata2: EH complete
[   14.485784] ata1.00: configured for UDMA/133
[   14.485788] ata1: EH complete
[   14.580981] ata2.00: configured for UDMA/133
[   14.580988] ata2: EH complete
[ 1456.398470] r8169 0000:01:00.0: eth0: link down
[ 1458.720458] r8169 0000:01:00.0: eth0: link up
[ 4603.600138] npviewer.bin[10123]: segfault at 0 ip (null) sp 00000000ffb0bc30 error 14 in npviewer.bin[8048000+2a000]
[16812.006885] npviewer.bin[5772]: segfault at 418 ip 00000000f5f30b66 sp 00000000ffa87338 error 6 in libflashplayer.so[f5ce2000+b2c000]
[16833.310146] npviewer.bin[15015]: segfault at f57a904c ip 00000000f604bdc7 sp 00000000ff8e21d0 error 4 in libflashplayer.so[f5cad000+b2c000]
[20403.021743] ata1.00: configured for UDMA/133
[20403.021747] ata1: EH complete
[20403.377340] ata2.00: configured for UDMA/133
[20403.377348] ata2: EH complete
[20404.293127] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[20404.293131] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[20404.293937] PM: Basic memory bitmaps created
[20405.565761] Syncing filesystems ... done.
[20405.631779] Freezing user space processes ... (elapsed 0.01 seconds) done.
[20405.642772] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[20405.656834] PM: Preallocating image memory... done (allocated 555949 pages)
[20406.466578] PM: Allocated 2223796 kbytes in 0.81 seconds (2745.42 MB/s)
[20406.466580] Suspending console(s) (use no_console_suspend to debug)
[20406.466858] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[20406.467261] parport_pc 00:08: disabled
[20406.467527] serial 00:07: disabled
[20406.467833] serial 00:06: disabled
[20406.667416] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[20406.669632] HDA Intel 0000:00:1b.0: PCI INT A disabled
[20406.669657] ACPI handle has no context!
[20406.734363] PM: freeze of devices complete after 268.231 msecs
[20406.734607] PM: late freeze of devices complete after 0.242 msecs
[20406.734867] ACPI: Preparing to enter system sleep state S4
[20406.735706] PM: Saving platform NVS memory
[20406.739248] Disabling non-boot CPUs ...
[20406.756527] CPU 1 is now offline
[20406.772520] CPU 2 is now offline
[20406.788228] CPU 3 is now offline
[20406.788230] SMP alternatives: switching to UP code
[20406.792485] PM: Creating hibernation image:
[20406.838893] PM: Need to copy 432197 pages
[20406.838895] PM: Normal pages needed: 432197 + 1024, available pages: 564856
[   11.299609] PM: Restoring platform NVS memory
[   11.303053] Enabling non-boot CPUs ...
[   11.305826] SMP alternatives: switching to SMP code
[   11.309386] Booting Node 0 Processor 1 APIC 0x4
[   11.404859] CPU1 is up
[   11.405103] Booting Node 0 Processor 2 APIC 0x1
[   11.507852] CPU2 is up
[   11.508177] Booting Node 0 Processor 3 APIC 0x5
[   11.611729] CPU3 is up
[   11.612860] ACPI: Waking up from system sleep state S4
[   11.613336] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   11.613402] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.613547] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.613620] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.613687] PM: early restore of devices complete after 0.427 msecs
[   11.698342] i915 0000:00:02.0: setting latency timer to 64
[   11.698378] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.698392] usb usb1: root hub lost power or was reset
[   11.702291] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.702305] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.702314] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.702345] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.702404] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.702416] usb usb2: root hub lost power or was reset
[   11.706322] pci 0000:00:1e.0: setting latency timer to 64
[   11.706323] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.706374] ahci 0000:00:1f.2: setting latency timer to 64
[   11.706924] sd 0:0:0:0: [sda] Starting disk
[   11.706985] sd 1:0:0:0: [sdb] Starting disk
[   11.708845] serial 00:06: activated
[   11.710030] r8169 0000:01:00.0: eth0: link up
[   11.710339] serial 00:07: activated
[   11.712241] parport_pc 00:08: activated
[   12.010198] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   12.010859] ata1.00: configured for UDMA/133
[   12.014178] ata6: SATA link down (SStatus 0 SControl 300)
[   12.016173] ata4: SATA link down (SStatus 0 SControl 300)
[   12.020165] ata5: SATA link down (SStatus 0 SControl 300)
[   12.029118] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   12.244668] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   12.429254] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   12.435208] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   12.438475] ata3.00: configured for UDMA/100
[   12.441257] ata2.00: configured for UDMA/133
[   12.461299] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.461520] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.634922] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   12.722953] PM: restore of devices complete after 1027.010 msecs
[   12.732490] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.732492] Restarting tasks ... done.
[   13.202395] PM: Basic memory bitmaps freed
[   15.382546] ata1.00: configured for UDMA/133
[   15.382550] ata1: EH complete
[   15.733868] ata2.00: configured for UDMA/133
[   15.733874] ata2: EH complete
[   16.044338] ata1.00: configured for UDMA/133
[   16.044342] ata1: EH complete
[   16.119547] ata2.00: configured for UDMA/133
[   16.119555] ata2: EH complete
[ 5946.208696] ata1.00: configured for UDMA/133
[ 5946.208703] ata1: EH complete
[ 5946.565130] ata2.00: configured for UDMA/133
[ 5946.565138] ata2: EH complete
[ 5947.293354] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 5947.293358] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 5947.294047] PM: Basic memory bitmaps created
[ 5948.534904] Syncing filesystems ... done.
[ 5948.597374] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 5948.608239] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 5948.622287] PM: Preallocating image memory... done (allocated 555949 pages)
[ 5949.077705] PM: Allocated 2223796 kbytes in 0.45 seconds (4941.76 MB/s)
[ 5949.077707] Suspending console(s) (use no_console_suspend to debug)
[ 5949.077971] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 5949.078373] parport_pc 00:08: disabled
[ 5949.078639] serial 00:07: disabled
[ 5949.078903] serial 00:06: disabled
[ 5949.179930] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 5949.179955] ACPI handle has no context!
[ 5949.277675] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5949.344624] PM: freeze of devices complete after 267.372 msecs
[ 5949.344864] PM: late freeze of devices complete after 0.238 msecs
[ 5949.345137] ACPI: Preparing to enter system sleep state S4
[ 5949.345982] PM: Saving platform NVS memory
[ 5949.349526] Disabling non-boot CPUs ...
[ 5949.366795] CPU 1 is now offline
[ 5949.382774] CPU 2 is now offline
[ 5949.398494] CPU 3 is now offline
[ 5949.398495] SMP alternatives: switching to UP code
[ 5949.402823] PM: Creating hibernation image:
[ 5949.448019] PM: Need to copy 429319 pages
[ 5949.448021] PM: Normal pages needed: 429319 + 1024, available pages: 567734
[   10.876805] PM: Restoring platform NVS memory
[   10.880250] Enabling non-boot CPUs ...
[   10.882948] SMP alternatives: switching to SMP code
[   10.886509] Booting Node 0 Processor 1 APIC 0x4
[   10.981983] CPU1 is up
[   10.982230] Booting Node 0 Processor 2 APIC 0x1
[   11.084974] CPU2 is up
[   11.085305] Booting Node 0 Processor 3 APIC 0x5
[   11.188850] CPU3 is up
[   11.189994] ACPI: Waking up from system sleep state S4
[   11.190531] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.190677] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.190750] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.190817] PM: early restore of devices complete after 0.424 msecs
[   11.273562] i915 0000:00:02.0: setting latency timer to 64
[   11.273584] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.273595] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.273599] usb usb1: root hub lost power or was reset
[   11.273600] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.277515] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.277537] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.277589] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.277602] usb usb2: root hub lost power or was reset
[   11.277607] pci 0000:00:1e.0: setting latency timer to 64
[   11.281524] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.281557] ahci 0000:00:1f.2: setting latency timer to 64
[   11.281965] sd 0:0:0:0: [sda] Starting disk
[   11.282028] sd 1:0:0:0: [sdb] Starting disk
[   11.283844] serial 00:06: activated
[   11.285098] r8169 0000:01:00.0: eth0: link up
[   11.285351] serial 00:07: activated
[   11.287144] parport_pc 00:08: activated
[   11.585379] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.586291] ata1.00: configured for UDMA/133
[   11.587348] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.589277] ata4: SATA link down (SStatus 0 SControl 300)
[   11.591351] ata6: SATA link down (SStatus 0 SControl 300)
[   11.593324] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.595266] ata5: SATA link down (SStatus 0 SControl 300)
[   11.596585] ata3.00: configured for UDMA/100
[   11.599356] ata2.00: configured for UDMA/133
[   11.604304] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.819764] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.820716] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.820963] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.006473] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   12.094577] PM: restore of devices complete after 822.941 msecs
[   12.104256] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.104258] Restarting tasks ... done.
[   12.475284] PM: Basic memory bitmaps freed
[   14.508788] ata1.00: configured for UDMA/133
[   14.508792] ata1: EH complete
[   14.876083] ata2.00: configured for UDMA/133
[   14.876089] ata2: EH complete
[   15.336281] ata1.00: configured for UDMA/133
[   15.336285] ata1: EH complete
[   15.426693] ata2.00: configured for UDMA/133
[   15.426698] ata2: EH complete
[ 9434.052570] ata1.00: configured for UDMA/133
[ 9434.052577] ata1: EH complete
[ 9434.406026] ata2.00: configured for UDMA/133
[ 9434.406034] ata2: EH complete
[ 9435.450174] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 9435.450177] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 9435.450889] PM: Basic memory bitmaps created
[ 9436.757928] Syncing filesystems ... done.
[ 9436.859290] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 9436.870162] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 9436.884248] PM: Preallocating image memory... done (allocated 555949 pages)
[ 9437.699821] PM: Allocated 2223796 kbytes in 0.81 seconds (2745.42 MB/s)
[ 9437.699823] Suspending console(s) (use no_console_suspend to debug)
[ 9437.700434] parport_pc 00:08: disabled
[ 9437.700699] serial 00:07: disabled
[ 9437.700962] serial 00:06: disabled
[ 9437.701067] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 9437.701118] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9437.802048] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 9437.802072] ACPI handle has no context!
[ 9437.812959] PM: freeze of devices complete after 113.238 msecs
[ 9437.813183] PM: late freeze of devices complete after 0.221 msecs
[ 9437.813481] ACPI: Preparing to enter system sleep state S4
[ 9437.814308] PM: Saving platform NVS memory
[ 9437.817840] Disabling non-boot CPUs ...
[ 9437.831380] CPU 1 is now offline
[ 9437.847239] CPU 2 is now offline
[ 9437.862947] CPU 3 is now offline
[ 9437.862948] SMP alternatives: switching to UP code
[ 9437.867252] PM: Creating hibernation image:
[ 9437.918181] PM: Need to copy 394697 pages
[ 9437.918184] PM: Normal pages needed: 394697 + 1024, available pages: 602356
[    8.936945] PM: Restoring platform NVS memory
[    8.940392] Enabling non-boot CPUs ...
[    8.943124] SMP alternatives: switching to SMP code
[    8.946686] Booting Node 0 Processor 1 APIC 0x4
[    9.042168] CPU1 is up
[    9.042417] Booting Node 0 Processor 2 APIC 0x1
[    9.145148] CPU2 is up
[    9.145455] Booting Node 0 Processor 3 APIC 0x5
[    9.249026] CPU3 is up
[    9.250165] ACPI: Waking up from system sleep state S4
[    9.250641] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[    9.250707] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[    9.250853] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[    9.250927] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[    9.250994] PM: early restore of devices complete after 0.429 msecs
[    9.344805] i915 0000:00:02.0: setting latency timer to 64
[    9.344843] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    9.344857] usb usb1: root hub lost power or was reset
[    9.348799] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    9.348826] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.348830] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.348859] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[    9.348866] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    9.348874] usb usb2: root hub lost power or was reset
[    9.352820] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    9.352838] pci 0000:00:1e.0: setting latency timer to 64
[    9.352902] ahci 0000:00:1f.2: setting latency timer to 64
[    9.353784] sd 0:0:0:0: [sda] Starting disk
[    9.353867] sd 1:0:0:0: [sdb] Starting disk
[    9.356355] serial 00:06: activated
[    9.358248] r8169 0000:01:00.0: eth0: link up
[    9.358321] serial 00:07: activated
[    9.360634] parport_pc 00:08: activated
[    9.656501] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    9.657263] ata1.00: configured for UDMA/133
[    9.658438] ata4: SATA link down (SStatus 0 SControl 300)
[    9.664418] ata6: SATA link down (SStatus 0 SControl 300)
[    9.668601] ata5: SATA link down (SStatus 0 SControl 300)
[    9.675543] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[    9.891094] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   10.077490] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.079486] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.082821] ata3.00: configured for UDMA/100
[   10.089535] ata2.00: configured for UDMA/133
[   10.107389] hub 2-1:1.0: hub_port_status failed (err = -32)
[   10.107640] hub 2-1:1.0: hub_port_status failed (err = -32)
[   10.281128] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   10.369491] PM: restore of devices complete after 1027.117 msecs
[   10.379059] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   10.379061] Restarting tasks ... done.
[   10.697285] PM: Basic memory bitmaps freed
[   12.447208] ata1.00: configured for UDMA/133
[   12.447216] ata1: EH complete
[   12.798704] ata2.00: configured for UDMA/133
[   12.798712] ata2: EH complete
[   13.153864] ata1.00: configured for UDMA/133
[   13.153868] ata1: EH complete
[   13.228640] ata2.00: configured for UDMA/133
[   13.228648] ata2: EH complete
[ 1154.695538] npviewer.bin[31364]: segfault at f103d04c ip 00000000f60b8dc7 sp 00000000ffc0d720 error 4 in libflashplayer.so[f5d1a000+b2c000]
[17905.239910] usb 2-1.4: new high speed USB device using ehci_hcd and address 8
[17905.453110] usb 2-1.4: New USB device found, idVendor=0e21, idProduct=0750
[17905.453116] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17905.453120] usb 2-1.4: Product: iAUDIO 7
[17905.453123] usb 2-1.4: Manufacturer: COWON Systems, Inc.
[17905.453126] usb 2-1.4: SerialNumber: 05032511455603B2C40000402B55B7F8
[17905.453535] scsi11 : usb-storage 2-1.4:1.0
[17910.983217] scsi 11:0:0:0: Direct-Access     COWON    iAUDIO 7         0100 PQ: 0 ANSI: 0
[17910.983381] sd 11:0:0:0: Attached scsi generic sg5 type 0
[17910.992998] sd 11:0:0:0: [sde] 32309248 512-byte logical blocks: (16.5 GB/15.4 GiB)
[17910.993679] sd 11:0:0:0: [sde] Write Protect is off
[17910.993683] sd 11:0:0:0: [sde] Mode Sense: 37 00 00 08
[17910.993685] sd 11:0:0:0: [sde] Assuming drive cache: write through
[17910.997530] sd 11:0:0:0: [sde] Assuming drive cache: write through
[17910.997536]  sde:
[17911.000079] sd 11:0:0:0: [sde] Assuming drive cache: write through
[17911.000083] sd 11:0:0:0: [sde] Attached SCSI removable disk
[19097.415321] ata1.00: configured for UDMA/133
[19097.415328] ata1: EH complete
[19097.795985] ata2.00: configured for UDMA/133
[19097.795993] ata2: EH complete
[19098.595700] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[19098.595703] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[19098.596451] PM: Basic memory bitmaps created
[19099.860729] Syncing filesystems ... done.
[19099.933129] Freezing user space processes ... (elapsed 0.01 seconds) done.
[19099.944129] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[19099.958171] PM: Preallocating image memory... done (allocated 555949 pages)
[19100.412129] PM: Allocated 2223796 kbytes in 0.45 seconds (4941.76 MB/s)
[19100.412131] Suspending console(s) (use no_console_suspend to debug)
[19100.412573] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[19100.413110] parport_pc 00:08: disabled
[19100.413378] serial 00:07: disabled
[19100.413640] serial 00:06: disabled
[19100.612618] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[19100.615658] HDA Intel 0000:00:1b.0: PCI INT A disabled
[19100.615682] ACPI handle has no context!
[19100.679574] PM: freeze of devices complete after 267.887 msecs
[19100.679816] PM: late freeze of devices complete after 0.239 msecs
[19100.680084] ACPI: Preparing to enter system sleep state S4
[19100.680940] PM: Saving platform NVS memory
[19100.684478] Disabling non-boot CPUs ...
[19100.701740] CPU 1 is now offline
[19100.717723] CPU 2 is now offline
[19100.733432] CPU 3 is now offline
[19100.733433] SMP alternatives: switching to UP code
[19100.737665] PM: Creating hibernation image:
[19100.780904] PM: Need to copy 424350 pages
[19100.780906] PM: Normal pages needed: 424350 + 1024, available pages: 572703
[   10.323165] PM: Restoring platform NVS memory
[   10.326610] Enabling non-boot CPUs ...
[   10.329416] SMP alternatives: switching to SMP code
[   10.332974] Booting Node 0 Processor 1 APIC 0x4
[   10.428450] CPU1 is up
[   10.428693] Booting Node 0 Processor 2 APIC 0x1
[   10.531447] CPU2 is up
[   10.531773] Booting Node 0 Processor 3 APIC 0x5
[   10.635324] CPU3 is up
[   10.636461] ACPI: Waking up from system sleep state S4
[   10.636936] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   10.637002] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.637148] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.637222] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.637291] PM: early restore of devices complete after 0.431 msecs
[   10.726175] i915 0000:00:02.0: setting latency timer to 64
[   10.726184] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.726191] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.726195] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.726201] usb usb1: root hub lost power or was reset
[   10.730125] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.730151] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.730192] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.730197] pci 0000:00:1e.0: setting latency timer to 64
[   10.730200] usb usb2: root hub lost power or was reset
[   10.734113] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.734125] ahci 0000:00:1f.2: setting latency timer to 64
[   10.736187] serial 00:06: activated
[   10.737553] r8169 0000:01:00.0: eth0: link up
[   10.737729] serial 00:07: activated
[   10.739645] parport_pc 00:08: activated
[   10.793326] sd 0:0:0:0: [sda] Starting disk
[   10.793368] sd 1:0:0:0: [sdb] Starting disk
[   11.037798] ata4: SATA link down (SStatus 0 SControl 300)
[   11.039791] ata5: SATA link down (SStatus 0 SControl 300)
[   11.041787] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.042519] ata1.00: configured for UDMA/133
[   11.043721] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.046770] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.047778] ata6: SATA link down (SStatus 0 SControl 300)
[   11.050064] ata3.00: configured for UDMA/100
[   11.055933] ata2.00: configured for UDMA/133
[   11.056696] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.272218] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.273449] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.273697] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.458967] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.616601] usb 2-1.4: reset high speed USB device using ehci_hcd and address 8
[   11.702279] PM: restore of devices complete after 978.342 msecs
[   11.711878] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.711880] Restarting tasks ... done.
[   12.014832] PM: Basic memory bitmaps freed
[   14.247089] ata1.00: configured for UDMA/133
[   14.247093] ata1: EH complete
[   14.607726] ata2.00: configured for UDMA/133
[   14.607735] ata2: EH complete
[   14.980690] ata1.00: configured for UDMA/133
[   14.980698] ata1: EH complete
[   15.059739] ata2.00: configured for UDMA/133
[   15.059748] ata2: EH complete
[  431.696509] usb 2-1.4: USB disconnect, address 8
[ 1934.580436] ata1.00: configured for UDMA/133
[ 1934.580440] ata1: EH complete
[ 1934.935319] ata2.00: configured for UDMA/133
[ 1934.935327] ata2: EH complete
[ 1935.643039] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1935.643082] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 1935.643843] PM: Basic memory bitmaps created
[ 1936.892688] Syncing filesystems ... done.
[ 1936.953183] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1936.964044] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1936.978171] PM: Preallocating image memory... done (allocated 555949 pages)
[ 1937.218546] PM: Allocated 2223796 kbytes in 0.24 seconds (9265.81 MB/s)
[ 1937.218548] Suspending console(s) (use no_console_suspend to debug)
[ 1937.218852] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1937.218869] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1937.219810] parport_pc 00:08: disabled
[ 1937.220073] serial 00:07: disabled
[ 1937.220333] serial 00:06: disabled
[ 1937.321226] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1937.321251] ACPI handle has no context!
[ 1937.332135] PM: freeze of devices complete after 113.686 msecs
[ 1937.332357] PM: late freeze of devices complete after 0.219 msecs
[ 1937.332662] ACPI: Preparing to enter system sleep state S4
[ 1937.333500] PM: Saving platform NVS memory
[ 1937.337029] Disabling non-boot CPUs ...
[ 1937.350431] CPU 1 is now offline
[ 1937.366291] CPU 2 is now offline
[ 1937.382124] CPU 3 is now offline
[ 1937.382126] SMP alternatives: switching to UP code
[ 1937.386450] PM: Creating hibernation image:
[ 1937.427890] PM: Need to copy 431540 pages
[ 1937.427893] PM: Normal pages needed: 431540 + 1024, available pages: 565513
[   11.440564] PM: Restoring platform NVS memory
[   11.444009] Enabling non-boot CPUs ...
[   11.446722] SMP alternatives: switching to SMP code
[   11.450285] Booting Node 0 Processor 1 APIC 0x4
[   11.545751] CPU1 is up
[   11.545978] Booting Node 0 Processor 2 APIC 0x1
[   11.648744] CPU2 is up
[   11.649071] Booting Node 0 Processor 3 APIC 0x5
[   11.752623] CPU3 is up
[   11.753761] ACPI: Waking up from system sleep state S4
[   11.754233] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[   11.754299] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.754445] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.754519] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.754585] PM: early restore of devices complete after 0.429 msecs
[   11.838173] i915 0000:00:02.0: setting latency timer to 64
[   11.838178] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.838193] usb usb1: root hub lost power or was reset
[   11.842114] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.842146] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.842147] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.842151] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.842155] usb usb2: root hub lost power or was reset
[   11.846069] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.846085] pci 0000:00:1e.0: setting latency timer to 64
[   11.846089] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.846096] ahci 0000:00:1f.2: setting latency timer to 64
[   11.847955] serial 00:06: activated
[   11.849446] serial 00:07: activated
[   11.849742] r8169 0000:01:00.0: eth0: link up
[   11.851288] parport_pc 00:08: activated
[   11.905507] sd 0:0:0:0: [sda] Starting disk
[   11.905553] sd 1:0:0:0: [sdb] Starting disk
[   12.150121] ata4: SATA link down (SStatus 0 SControl 300)
[   12.153114] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   12.154102] ata6: SATA link down (SStatus 0 SControl 300)
[   12.156105] ata5: SATA link down (SStatus 0 SControl 300)
[   12.159036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   12.159726] ata1.00: configured for UDMA/133
[   12.161031] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   12.164361] ata3.00: configured for UDMA/100
[   12.165405] ata2.00: configured for UDMA/133
[   12.169260] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   12.384616] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   12.601043] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.601204] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.774860] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   12.862889] PM: restore of devices complete after 1027.065 msecs
[   12.872443] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.872445] Restarting tasks ... done.
[   13.179014] PM: Basic memory bitmaps freed
[   14.903086] ata1.00: configured for UDMA/133
[   14.903094] ata1: EH complete
[   15.268437] ata2.00: configured for UDMA/133
[   15.268442] ata2: EH complete
[   15.577157] ata3: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x10
[   15.577160] ata3: irq_stat 0x40000001
[   15.577163] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[   15.577170] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[   15.577170]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[   15.577172] ata3.00: status: { DRDY ERR }
[   15.712908] ata1.00: configured for UDMA/133
[   15.712915] ata1: EH complete
[   15.796704] ata2.00: configured for UDMA/133
[   15.796711] ata2: EH complete
[ 1779.688520] npviewer.bin[15762]: segfault at f232104c ip 00000000f6051dc7 sp 00000000ffedab00 error 4 in libflashplayer.so[f5cb3000+b2c000]
[ 4102.703197] r8169 0000:01:00.0: eth0: link down
[ 4105.122707] r8169 0000:01:00.0: eth0: link up
[16630.041121] ata1.00: configured for UDMA/133
[16630.041125] ata1: EH complete
[16630.395358] ata2.00: configured for UDMA/133
[16630.395367] ata2: EH complete
[16631.229279] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[16631.229283] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[16631.230123] PM: Basic memory bitmaps created
[16632.498601] Syncing filesystems ... done.
[16632.567966] Freezing user space processes ... (elapsed 0.01 seconds) done.
[16632.578897] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[16632.593020] PM: Preallocating image memory... done (allocated 555980 pages)
[16633.539310] PM: Allocated 2223920 kbytes in 0.94 seconds (2365.87 MB/s)
[16633.539312] Suspending console(s) (use no_console_suspend to debug)
[16633.539584] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[16633.540008] parport_pc 00:08: disabled
[16633.540276] serial 00:07: disabled
[16633.540539] serial 00:06: disabled
[16633.740200] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[16633.743258] HDA Intel 0000:00:1b.0: PCI INT A disabled
[16633.743282] ACPI handle has no context!
[16633.806178] PM: freeze of devices complete after 267.315 msecs
[16633.806406] PM: late freeze of devices complete after 0.226 msecs
[16633.806683] ACPI: Preparing to enter system sleep state S4
[16633.807521] PM: Saving platform NVS memory
[16633.811090] Disabling non-boot CPUs ...
[16633.828346] CPU 1 is now offline
[16633.844195] CPU 2 is now offline
[16633.860049] CPU 3 is now offline
[16633.860051] SMP alternatives: switching to UP code
[16633.864347] PM: Creating hibernation image:
[16633.908382] PM: Need to copy 432141 pages
[16633.908385] PM: Normal pages needed: 432141 + 1024, available pages: 564912
[   10.268356] PM: Restoring platform NVS memory
[   10.271802] Enabling non-boot CPUs ...
[   10.274529] SMP alternatives: switching to SMP code
[   10.278090] Booting Node 0 Processor 1 APIC 0x4
[   10.373562] CPU1 is up
[   10.373808] Booting Node 0 Processor 2 APIC 0x1
[   10.476557] CPU2 is up
[   10.476881] Booting Node 0 Processor 3 APIC 0x5
[   10.580429] CPU3 is up
[   10.581641] ACPI: Waking up from system sleep state S4
[   10.582110] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   10.582176] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.582322] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.582396] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.582463] PM: early restore of devices complete after 0.429 msecs
[   10.667036] i915 0000:00:02.0: setting latency timer to 64
[   10.667077] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.667092] usb usb1: root hub lost power or was reset
[   10.667095] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.671034] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.671035] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.671065] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.671127] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.671142] usb usb2: root hub lost power or was reset
[   10.675079] pci 0000:00:1e.0: setting latency timer to 64
[   10.675085] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.675140] ahci 0000:00:1f.2: setting latency timer to 64
[   10.675772] sd 0:0:0:0: [sda] Starting disk
[   10.675838] sd 1:0:0:0: [sdb] Starting disk
[   10.677750] serial 00:06: activated
[   10.678623] r8169 0000:01:00.0: eth0: link up
[   10.679241] serial 00:07: activated
[   10.681124] parport_pc 00:08: activated
[   10.978962] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.979753] ata1.00: configured for UDMA/133
[   10.981857] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.982881] ata6: SATA link down (SStatus 0 SControl 300)
[   10.984882] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.985207] ata3.00: configured for UDMA/100
[   10.986849] ata4: SATA link down (SStatus 0 SControl 300)
[   10.988847] ata5: SATA link down (SStatus 0 SControl 300)
[   10.997091] ata2.00: configured for UDMA/133
[   10.997877] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.213404] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.214365] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.214608] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.400141] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.489205] PM: restore of devices complete after 824.129 msecs
[   11.498815] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.498818] Restarting tasks ... done.
[   11.870191] PM: Basic memory bitmaps freed
[   13.867760] ata1.00: configured for UDMA/133
[   13.867767] ata1: EH complete
[   14.224976] ata2.00: configured for UDMA/133
[   14.224982] ata2: EH complete
[   14.678198] ata1.00: configured for UDMA/133
[   14.678205] ata1: EH complete
[   14.753789] ata2.00: configured for UDMA/133
[   14.753795] ata2: EH complete
[ 1755.728434] ata1.00: configured for UDMA/133
[ 1755.728441] ata1: EH complete
[ 1756.076890] ata2.00: configured for UDMA/133
[ 1756.076898] ata2: EH complete
[ 1757.171802] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1757.171806] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 1757.172774] PM: Basic memory bitmaps created
[ 1758.417718] Syncing filesystems ... done.
[ 1758.476180] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1758.486980] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1758.501055] PM: Preallocating image memory... done (allocated 555949 pages)
[ 1758.787782] PM: Allocated 2223796 kbytes in 0.28 seconds (7942.12 MB/s)
[ 1758.787783] Suspending console(s) (use no_console_suspend to debug)
[ 1758.788379] parport_pc 00:08: disabled
[ 1758.788644] serial 00:07: disabled
[ 1758.788905] serial 00:06: disabled
[ 1758.789011] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1758.789079] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1758.890036] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1758.890063] ACPI handle has no context!
[ 1758.900966] PM: freeze of devices complete after 113.296 msecs
[ 1758.901194] PM: late freeze of devices complete after 0.225 msecs
[ 1758.901508] ACPI: Preparing to enter system sleep state S4
[ 1758.902343] PM: Saving platform NVS memory
[ 1758.905865] Disabling non-boot CPUs ...
[ 1758.919387] CPU 1 is now offline
[ 1758.939359] CPU 2 is now offline
[ 1758.954941] CPU 3 is now offline
[ 1758.954943] SMP alternatives: switching to UP code
[ 1758.959223] PM: Creating hibernation image:
[ 1759.001362] PM: Need to copy 430878 pages
[ 1759.001364] PM: Normal pages needed: 430878 + 1024, available pages: 566175
[   10.613835] PM: Restoring platform NVS memory
[   10.617281] Enabling non-boot CPUs ...
[   10.620041] SMP alternatives: switching to SMP code
[   10.623605] Booting Node 0 Processor 1 APIC 0x4
[   10.719083] CPU1 is up
[   10.719333] Booting Node 0 Processor 2 APIC 0x1
[   10.822075] CPU2 is up
[   10.822401] Booting Node 0 Processor 3 APIC 0x5
[   10.925953] CPU3 is up
[   10.927085] ACPI: Waking up from system sleep state S4
[   10.927561] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[   10.927627] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.927773] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.927847] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.927915] PM: early restore of devices complete after 0.430 msecs
[   11.011053] i915 0000:00:02.0: setting latency timer to 64
[   11.011097] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.011112] usb usb1: root hub lost power or was reset
[   11.015009] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.015028] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.015033] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.015059] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.015120] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.015130] usb usb2: root hub lost power or was reset
[   11.019042] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.019049] pci 0000:00:1e.0: setting latency timer to 64
[   11.019106] ahci 0000:00:1f.2: setting latency timer to 64
[   11.019875] sd 0:0:0:0: [sda] Starting disk
[   11.019956] sd 1:0:0:0: [sdb] Starting disk
[   11.021905] serial 00:06: activated
[   11.023134] r8169 0000:01:00.0: eth0: link up
[   11.023408] serial 00:07: activated
[   11.025276] parport_pc 00:08: activated
[   11.323451] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.324178] ata1.00: configured for UDMA/133
[   11.326378] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.327406] ata6: SATA link down (SStatus 0 SControl 300)
[   11.329456] ata4: SATA link down (SStatus 0 SControl 300)
[   11.329654] ata3.00: configured for UDMA/100
[   11.331364] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.333426] ata5: SATA link down (SStatus 0 SControl 300)
[   11.343528] ata2.00: configured for UDMA/133
[   11.346361] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.561907] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.562897] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.563145] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.748635] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.837640] PM: restore of devices complete after 828.572 msecs
[   11.847312] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.847314] Restarting tasks ... done.
[   12.162745] PM: Basic memory bitmaps freed
[   14.029734] ata1.00: configured for UDMA/133
[   14.029743] ata1: EH complete
[   14.113509] ata2.00: configured for UDMA/133
[   14.113515] ata2: EH complete
[   14.605125] ata1.00: configured for UDMA/133
[   14.605129] ata1: EH complete
[   14.697300] ata2.00: configured for UDMA/133
[   14.697306] ata2: EH complete
[ 6840.547090] r8169 0000:01:00.0: eth0: link down
[ 6842.840855] r8169 0000:01:00.0: eth0: link up
[17878.355427] ata1.00: configured for UDMA/133
[17878.355434] ata1: EH complete
[17878.709371] ata2.00: configured for UDMA/133
[17878.709379] ata2: EH complete
[17879.975540] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[17879.975544] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[17879.976256] PM: Basic memory bitmaps created
[17881.423859] Syncing filesystems ... done.
[17881.486431] Freezing user space processes ... (elapsed 0.01 seconds) done.
[17881.497295] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[17881.511385] PM: Preallocating image memory... done (allocated 555949 pages)
[17882.102658] PM: Allocated 2223796 kbytes in 0.59 seconds (3769.14 MB/s)
[17882.102659] Suspending console(s) (use no_console_suspend to debug)
[17882.102938] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[17882.103364] parport_pc 00:08: disabled
[17882.103628] serial 00:07: disabled
[17882.104052] serial 00:06: disabled
[17882.303415] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[17882.305455] HDA Intel 0000:00:1b.0: PCI INT A disabled
[17882.305480] ACPI handle has no context!
[17882.402245] PM: freeze of devices complete after 300.107 msecs
[17882.402474] PM: late freeze of devices complete after 0.226 msecs
[17882.402754] ACPI: Preparing to enter system sleep state S4
[17882.403598] PM: Saving platform NVS memory
[17882.407106] Disabling non-boot CPUs ...
[17882.420477] CPU 1 is now offline
[17882.436326] CPU 2 is now offline
[17882.452162] CPU 3 is now offline
[17882.452164] SMP alternatives: switching to UP code
[17882.456393] PM: Creating hibernation image:
[17882.503625] PM: Need to copy 415050 pages
[17882.503627] PM: Normal pages needed: 415050 + 1024, available pages: 582003
[   10.292091] PM: Restoring platform NVS memory
[   10.295536] Enabling non-boot CPUs ...
[   10.298352] SMP alternatives: switching to SMP code
[   10.301909] Booting Node 0 Processor 1 APIC 0x4
[   10.397387] CPU1 is up
[   10.397642] Booting Node 0 Processor 2 APIC 0x1
[   10.500376] CPU2 is up
[   10.500700] Booting Node 0 Processor 3 APIC 0x5
[   10.604253] CPU3 is up
[   10.605393] ACPI: Waking up from system sleep state S4
[   10.605862] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   10.605928] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.606074] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.606148] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.606214] PM: early restore of devices complete after 0.428 msecs
[   10.687564] i915 0000:00:02.0: setting latency timer to 64
[   10.687602] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.687617] usb usb1: root hub lost power or was reset
[   10.687620] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.691528] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.691534] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.691561] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.691615] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.691624] usb usb2: root hub lost power or was reset
[   10.695546] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.695562] pci 0000:00:1e.0: setting latency timer to 64
[   10.695610] ahci 0000:00:1f.2: setting latency timer to 64
[   10.696179] sd 0:0:0:0: [sda] Starting disk
[   10.696243] sd 1:0:0:0: [sdb] Starting disk
[   10.698122] serial 00:06: activated
[   10.699618] serial 00:07: activated
[   10.701497] r8169 0000:01:00.0: eth0: link up
[   10.701515] parport_pc 00:08: activated
[   10.999794] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.000583] ata1.00: configured for UDMA/133
[   11.002686] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.004710] ata6: SATA link down (SStatus 0 SControl 300)
[   11.005766] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.008680] ata4: SATA link down (SStatus 0 SControl 300)
[   11.009023] ata3.00: configured for UDMA/100
[   11.010693] ata5: SATA link down (SStatus 0 SControl 300)
[   11.014814] ata2.00: configured for UDMA/133
[   11.018686] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.234232] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.235154] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.235402] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.421020] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.509729] PM: restore of devices complete after 824.107 msecs
[   11.519460] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.519462] Restarting tasks ... done.
[   11.813252] PM: Basic memory bitmaps freed
[   13.688582] ata1.00: configured for UDMA/133
[   13.688588] ata1: EH complete
[   14.046565] ata2.00: configured for UDMA/133
[   14.046572] ata2: EH complete
[   14.417839] ata1.00: configured for UDMA/133
[   14.417843] ata1: EH complete
[   14.498144] ata2.00: configured for UDMA/133
[   14.498150] ata2: EH complete
[ 1742.693448] ata1.00: configured for UDMA/133
[ 1742.693453] ata1: EH complete
[ 1743.044146] ata2.00: configured for UDMA/133
[ 1743.044155] ata2: EH complete
[ 1743.887173] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1743.887176] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 1743.887909] PM: Basic memory bitmaps created
[ 1745.130054] Syncing filesystems ... done.
[ 1745.195324] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1745.206250] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1745.220329] PM: Preallocating image memory... done (allocated 555949 pages)
[ 1745.485023] PM: Allocated 2223796 kbytes in 0.26 seconds (8553.06 MB/s)
[ 1745.485025] Suspending console(s) (use no_console_suspend to debug)
[ 1745.485631] parport_pc 00:08: disabled
[ 1745.485900] serial 00:07: disabled
[ 1745.486163] serial 00:06: disabled
[ 1745.486258] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1745.486305] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1745.588451] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1745.588475] ACPI handle has no context!
[ 1745.599345] PM: freeze of devices complete after 114.424 msecs
[ 1745.599570] PM: late freeze of devices complete after 0.222 msecs
[ 1745.599891] ACPI: Preparing to enter system sleep state S4
[ 1745.600734] PM: Saving platform NVS memory
[ 1745.604256] Disabling non-boot CPUs ...
[ 1745.617969] CPU 1 is now offline
[ 1745.633629] CPU 2 is now offline
[ 1745.649320] CPU 3 is now offline
[ 1745.649322] SMP alternatives: switching to UP code
[ 1745.653585] PM: Creating hibernation image:
[ 1745.696936] PM: Need to copy 431365 pages
[ 1745.696938] PM: Normal pages needed: 431365 + 1024, available pages: 565688
[   11.240486] PM: Restoring platform NVS memory
[   11.243932] Enabling non-boot CPUs ...
[   11.246717] SMP alternatives: switching to SMP code
[   11.250281] Booting Node 0 Processor 1 APIC 0x4
[   11.345759] CPU1 is up
[   11.346010] Booting Node 0 Processor 2 APIC 0x1
[   11.448746] CPU2 is up
[   11.449070] Booting Node 0 Processor 3 APIC 0x5
[   11.552629] CPU3 is up
[   11.553759] ACPI: Waking up from system sleep state S4
[   11.554237] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[   11.554303] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.554448] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.554523] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.554590] PM: early restore of devices complete after 0.430 msecs
[   11.638324] i915 0000:00:02.0: setting latency timer to 64
[   11.638359] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.638374] usb usb1: root hub lost power or was reset
[   11.638376] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.642291] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.642296] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.642321] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.642375] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.642385] usb usb2: root hub lost power or was reset
[   11.646317] pci 0000:00:1e.0: setting latency timer to 64
[   11.646361] ahci 0000:00:1f.2: setting latency timer to 64
[   11.646945] sd 0:0:0:0: [sda] Starting disk
[   11.647007] sd 1:0:0:0: [sdb] Starting disk
[   11.647142] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.648928] serial 00:06: activated
[   11.649929] r8169 0000:01:00.0: eth0: link up
[   11.650446] serial 00:07: activated
[   11.652351] parport_pc 00:08: activated
[   11.950173] ata4: SATA link down (SStatus 0 SControl 300)
[   11.952114] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.952875] ata1.00: configured for UDMA/133
[   11.954048] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.957084] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.958098] ata6: SATA link down (SStatus 0 SControl 300)
[   11.960040] ata5: SATA link down (SStatus 0 SControl 300)
[   11.960381] ata3.00: configured for UDMA/100
[   11.966067] ata2.00: configured for UDMA/133
[   11.970157] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   12.185556] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   12.187512] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.187761] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.372401] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   12.461270] PM: restore of devices complete after 824.904 msecs
[   12.470965] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.470967] Restarting tasks ... done.
[   12.839263] PM: Basic memory bitmaps freed
[   14.385184] ata1.00: configured for UDMA/133
[   14.385191] ata1: EH complete
[   14.475831] ata2.00: configured for UDMA/133
[   14.475839] ata2: EH complete
[   14.770860] ata1.00: configured for UDMA/133
[   14.770864] ata1: EH complete
[   14.850354] ata2.00: configured for UDMA/133
[   14.850362] ata2: EH complete
[   15.150184] ata3: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x10
[   15.150187] ata3: irq_stat 0x40000001
[   15.150189] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[   15.150196] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[   15.150196]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[   15.150198] ata3.00: status: { DRDY ERR }
[21791.460266] ata1.00: configured for UDMA/133
[21791.460270] ata1: EH complete
[21791.822112] ata2.00: configured for UDMA/133
[21791.822121] ata2: EH complete
[21792.650322] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[21792.650326] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[21792.650967] PM: Basic memory bitmaps created
[21793.944651] Syncing filesystems ... done.
[21794.015151] Freezing user space processes ... (elapsed 0.01 seconds) done.
[21794.026025] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[21794.040122] PM: Preallocating image memory... done (allocated 555949 pages)
[21794.784578] PM: Allocated 2223796 kbytes in 0.74 seconds (3005.12 MB/s)
[21794.784580] Suspending console(s) (use no_console_suspend to debug)
[21794.785185] parport_pc 00:08: disabled
[21794.785457] serial 00:07: disabled
[21794.785720] serial 00:06: disabled
[21794.785832] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[21794.985803] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[21794.987837] HDA Intel 0000:00:1b.0: PCI INT A disabled
[21794.987861] ACPI handle has no context!
[21795.051756] PM: freeze of devices complete after 267.637 msecs
[21795.051988] PM: late freeze of devices complete after 0.229 msecs
[21795.052274] ACPI: Preparing to enter system sleep state S4
[21795.053105] PM: Saving platform NVS memory
[21795.056640] Disabling non-boot CPUs ...
[21795.070219] CPU 1 is now offline
[21795.090021] CPU 2 is now offline
[21795.105601] CPU 3 is now offline
[21795.105603] SMP alternatives: switching to UP code
[21795.109901] PM: Creating hibernation image:
[21795.155145] PM: Need to copy 432342 pages
[21795.155147] PM: Normal pages needed: 432342 + 1024, available pages: 564711
[    9.958836] PM: Restoring platform NVS memory
[    9.962282] Enabling non-boot CPUs ...
[    9.965034] SMP alternatives: switching to SMP code
[    9.968594] Booting Node 0 Processor 1 APIC 0x4
[   10.064075] CPU1 is up
[   10.064334] Booting Node 0 Processor 2 APIC 0x1
[   10.167063] CPU2 is up
[   10.167386] Booting Node 0 Processor 3 APIC 0x5
[   10.270935] CPU3 is up
[   10.272081] ACPI: Waking up from system sleep state S4
[   10.272555] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   10.272621] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.272767] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.272841] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.272908] PM: early restore of devices complete after 0.429 msecs
[   10.272931] r8169 0000:01:00.0: eth0: link up
[   10.361903] i915 0000:00:02.0: setting latency timer to 64
[   10.377057] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.377072] usb usb1: root hub lost power or was reset
[   10.380981] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.380985] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.381013] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.381039] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.381047] usb usb2: root hub lost power or was reset
[   10.384965] pci 0000:00:1e.0: setting latency timer to 64
[   10.384983] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.384993] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.386048] ahci 0000:00:1f.2: setting latency timer to 64
[   10.388047] sd 0:0:0:0: [sda] Starting disk
[   10.388152] sd 1:0:0:0: [sdb] Starting disk
[   10.390139] r8169 0000:01:00.0: eth0: link up
[   10.399529] serial 00:06: activated
[   10.401527] serial 00:07: activated
[   10.403831] parport_pc 00:08: activated
[   10.690382] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.692366] ata6: SATA link down (SStatus 0 SControl 300)
[   10.693726] ata3.00: configured for UDMA/100
[   10.694313] ata4: SATA link down (SStatus 0 SControl 300)
[   10.696310] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.696862] ata1.00: configured for UDMA/133
[   10.698301] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.700487] ata5: SATA link down (SStatus 0 SControl 300)
[   10.709469] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   10.710386] ata2.00: configured for UDMA/133
[   10.924864] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   10.925814] hub 2-1:1.0: hub_port_status failed (err = -32)
[   10.926060] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.111528] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.199313] PM: restore of devices complete after 839.439 msecs
[   11.208908] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.208910] Restarting tasks ... done.
[   11.574824] PM: Basic memory bitmaps freed
[   13.635733] ata1.00: configured for UDMA/133
[   13.635738] ata1: EH complete
[   14.001108] ata2.00: configured for UDMA/133
[   14.001116] ata2: EH complete
[   24.567488] ata1.00: configured for UDMA/133
[   24.567494] ata1: EH complete
[   24.916958] ata2.00: configured for UDMA/133
[   24.916967] ata2: EH complete
[ 1668.465704] ata1.00: configured for UDMA/133
[ 1668.465708] ata1: EH complete
[ 1668.823445] ata2.00: configured for UDMA/133
[ 1668.823454] ata2: EH complete
[ 1670.061662] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1670.061666] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 1670.062438] PM: Basic memory bitmaps created
[ 1671.302800] Syncing filesystems ... done.
[ 1671.361199] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1671.372133] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1671.386214] PM: Preallocating image memory... done (allocated 555949 pages)
[ 1671.666267] PM: Allocated 2223796 kbytes in 0.28 seconds (7942.12 MB/s)
[ 1671.666268] Suspending console(s) (use no_console_suspend to debug)
[ 1671.666877] parport_pc 00:08: disabled
[ 1671.667141] serial 00:07: disabled
[ 1671.667403] serial 00:06: disabled
[ 1671.667542] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1671.667591] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1671.769222] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1671.769246] ACPI handle has no context!
[ 1671.780128] PM: freeze of devices complete after 113.963 msecs
[ 1671.780354] PM: late freeze of devices complete after 0.223 msecs
[ 1671.780677] ACPI: Preparing to enter system sleep state S4
[ 1671.781513] PM: Saving platform NVS memory
[ 1671.785050] Disabling non-boot CPUs ...
[ 1671.798751] CPU 1 is now offline
[ 1671.814277] CPU 2 is now offline
[ 1671.830102] CPU 3 is now offline
[ 1671.830103] SMP alternatives: switching to UP code
[ 1671.834429] PM: Creating hibernation image:
[ 1671.877693] PM: Need to copy 431089 pages
[ 1671.877695] PM: Normal pages needed: 431089 + 1024, available pages: 565964
[   11.009658] PM: Restoring platform NVS memory
[   11.013102] Enabling non-boot CPUs ...
[   11.015824] SMP alternatives: switching to SMP code
[   11.019385] Booting Node 0 Processor 1 APIC 0x4
[   11.114863] CPU1 is up
[   11.115100] Booting Node 0 Processor 2 APIC 0x1
[   11.217854] CPU2 is up
[   11.218177] Booting Node 0 Processor 3 APIC 0x5
[   11.321725] CPU3 is up
[   11.322862] ACPI: Waking up from system sleep state S4
[   11.323402] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.323548] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.323622] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.323689] PM: early restore of devices complete after 0.426 msecs
[   11.411460] i915 0000:00:02.0: setting latency timer to 64
[   11.411481] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.411495] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.411497] usb usb1: root hub lost power or was reset
[   11.411499] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.415425] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.415449] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.415499] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.415509] usb usb2: root hub lost power or was reset
[   11.419440] pci 0000:00:1e.0: setting latency timer to 64
[   11.419442] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.419484] ahci 0000:00:1f.2: setting latency timer to 64
[   11.419931] sd 0:0:0:0: [sda] Starting disk
[   11.419979] sd 1:0:0:0: [sdb] Starting disk
[   11.421835] serial 00:06: activated
[   11.423020] r8169 0000:01:00.0: eth0: link up
[   11.423344] serial 00:07: activated
[   11.425264] parport_pc 00:08: activated
[   11.723179] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.723862] ata1.00: configured for UDMA/133
[   11.725141] ata4: SATA link down (SStatus 0 SControl 300)
[   11.727161] ata6: SATA link down (SStatus 0 SControl 300)
[   11.731155] ata5: SATA link down (SStatus 0 SControl 300)
[   11.733148] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.742101] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.745342] ata2.00: configured for UDMA/133
[   11.957654] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.958630] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.958884] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.144395] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   12.146264] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   12.149631] ata3.00: configured for UDMA/100
[   12.232471] PM: restore of devices complete after 822.948 msecs
[   12.242193] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.242195] Restarting tasks ... done.
[   12.547649] PM: Basic memory bitmaps freed
[   14.532676] ata1.00: configured for UDMA/133
[   14.532680] ata1: EH complete
[   14.893523] ata2.00: configured for UDMA/133
[   14.893532] ata2: EH complete
[   16.029822] ata1.00: configured for UDMA/133
[   16.029827] ata1: EH complete
[   16.391132] ata2.00: configured for UDMA/133
[   16.391138] ata2: EH complete
[14211.288382] ata1.00: configured for UDMA/133
[14211.288389] ata1: EH complete
[14211.677482] ata2.00: configured for UDMA/133
[14211.677490] ata2: EH complete
[14991.666093] PM: Syncing filesystems ... done.
[14992.120679] PM: Preparing system for mem sleep
[14992.120961] Freezing user space processes ... (elapsed 0.01 seconds) done.
[14992.132485] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[14992.143448] PM: Entering mem sleep
[14992.143467] Suspending console(s) (use no_console_suspend to debug)
[14992.143802] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[14992.143892] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14992.144028] sd 0:0:0:0: [sda] Stopping disk
[14992.155788] sd 1:0:0:0: [sdb] Stopping disk
[14992.160479] parport_pc 00:08: disabled
[14992.160748] serial 00:07: disabled
[14992.161010] serial 00:06: disabled
[14992.363010] HDA Intel 0000:00:1b.0: PCI INT A disabled
[14992.363034] ACPI handle has no context!
[14993.617111] PM: suspend of devices complete after 1476.775 msecs
[14993.617189] r8169 0000:01:00.0: PME# enabled
[14993.617197] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[14993.650068] PM: late suspend of devices complete after 33.028 msecs
[14993.650257] ACPI: Preparing to enter system sleep state S3
[14993.651274] Disabling non-boot CPUs ...
[14993.664458] CPU 1 is now offline
[14993.680306] CPU 2 is now offline
[14993.696021] CPU 3 is now offline
[14993.696023] SMP alternatives: switching to UP code
[18446744052.625741] Back to C!
[18446744052.626019] Enabling non-boot CPUs ...
[18446744052.628818] SMP alternatives: switching to SMP code
[18446744052.632606] Booting Node 0 Processor 1 APIC 0x4
[18446744052.727891] CPU1 is up
[18446744052.728188] Booting Node 0 Processor 2 APIC 0x1
[18446744052.830821] CPU2 is up
[18446744052.831152] Booting Node 0 Processor 3 APIC 0x5
[18446744052.934699] CPU3 is up
[18446744052.935706] ACPI: Waking up from system sleep state S3
[18446744052.936322] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[18446744052.936340] pci 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[18446744052.936354] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[18446744052.936414] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[18446744052.936419] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[18446744052.936439] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x20105)
[18446744052.936451] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[18446744052.936456] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[18446744052.936511] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff)
[18446744052.936577] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[18446744052.936633] r8169 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[18446744052.936640] r8169 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfbee0000)
[18446744052.936649] r8169 0000:01:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfaff800c)
[18446744052.936655] r8169 0000:01:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfafff00c)
[18446744052.936661] r8169 0000:01:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xd801)
[18446744052.936666] r8169 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[18446744052.936672] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[18446744052.936739] PM: early resume of devices complete after 0.454 msecs
[18446744052.936791] i915 0000:00:02.0: setting latency timer to 64
[18446744052.939380] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[18446744052.939387] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[18446744052.939392] HDA Intel 0000:00:1b.0: setting latency timer to 64
[18446744052.939418] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[18446744052.939448] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[18446744052.939463] pci 0000:00:1e.0: setting latency timer to 64
[18446744052.939491] ahci 0000:00:1f.2: setting latency timer to 64
[18446744052.939543] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[18446744052.939548] r8169 0000:01:00.0: PME# disabled
[18446744052.941047] serial 00:06: activated
[18446744052.942323] serial 00:07: activated
[18446744052.943029] r8169 0000:01:00.0: eth0: link up
[18446744052.943880] parport_pc 00:08: activated
[18446744052.980099] sd 0:0:0:0: [sda] Starting disk
[18446744052.992062] sd 1:0:0:0: [sdb] Starting disk
[18446744053.010087] hub 2-1:1.0: hub_port_status failed (err = -32)
[18446744053.010331] hub 2-1:1.0: hub_port_status failed (err = -32)
[18446744053.243407] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18446744053.244132] ata1.00: configured for UDMA/133
[18446744053.245357] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[18446744053.246488] ata3.00: configured for UDMA/100
[18446744053.249413] ata6: SATA link down (SStatus 0 SControl 300)
[18446744053.251350] ata5: SATA link down (SStatus 0 SControl 300)
[18446744053.253373] ata4: SATA link down (SStatus 0 SControl 300)
[18446744058.285050] ata2: link is slow to respond, please be patient (ready=0)
[18446744062.966529] ata2: COMRESET failed (errno=-16)
[18446744064.034136] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18446744064.046329] ata2.00: configured for UDMA/133
[18446744064.065432] PM: resume of devices complete after 11153.680 msecs
[18446744064.065644] PM: Finishing wakeup.
[18446744064.065645] Restarting tasks ... done.
[18446744066.129053] ata1.00: configured for UDMA/133
[18446744066.129056] ata1: EH complete
[18446744066.227174] ata2.00: configured for UDMA/133
[18446744066.227184] ata2: EH complete
[   50.811564] ata1.00: configured for UDMA/133
[   50.811576] ata1: EH complete
[   51.543923] ata2.00: configured for UDMA/133
[   51.543932] ata2: EH complete
[ 4356.845120] ata1.00: configured for UDMA/133
[ 4356.845123] ata1: EH complete
[ 4357.196615] ata2.00: configured for UDMA/133
[ 4357.196623] ata2: EH complete
[ 4357.922085] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 4357.922089] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 4357.922872] PM: Basic memory bitmaps created
[ 4359.199340] Syncing filesystems ... done.
[ 4359.258030] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 4359.268980] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 4359.282719] PM: Preallocating image memory... done (allocated 555980 pages)
[ 4360.040498] PM: Allocated 2223920 kbytes in 0.75 seconds (2965.22 MB/s)
[ 4360.040499] Suspending console(s) (use no_console_suspend to debug)
[ 4360.040813] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 4360.041354] parport_pc 00:08: disabled
[ 4360.041629] serial 00:07: disabled
[ 4360.041902] serial 00:06: disabled
[ 4360.240723] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4360.243775] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 4360.243799] ACPI handle has no context!
[ 4360.328581] PM: freeze of devices complete after 288.576 msecs
[ 4360.328812] PM: late freeze of devices complete after 0.228 msecs
[ 4360.329097] ACPI: Preparing to enter system sleep state S4
[ 4360.329963] PM: Saving platform NVS memory
[ 4360.333507] Disabling non-boot CPUs ...
[ 4360.350820] CPU 1 is now offline
[ 4360.366793] CPU 2 is now offline
[ 4360.382480] CPU 3 is now offline
[ 4360.382482] SMP alternatives: switching to UP code
[ 4360.386688] PM: Creating hibernation image:
[ 4360.431992] PM: Need to copy 432046 pages
[ 4360.431994] PM: Normal pages needed: 432046 + 1024, available pages: 565007
[    9.857751] PM: Restoring platform NVS memory
[    9.861198] Enabling non-boot CPUs ...
[    9.864039] SMP alternatives: switching to SMP code
[    9.867604] Booting Node 0 Processor 1 APIC 0x4
[    9.963075] CPU1 is up
[    9.963325] Booting Node 0 Processor 2 APIC 0x1
[   10.066085] CPU2 is up
[   10.066419] Booting Node 0 Processor 3 APIC 0x5
[   10.169959] CPU3 is up
[   10.171105] ACPI: Waking up from system sleep state S4
[   10.171582] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   10.171649] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.171798] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.171873] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.171941] PM: early restore of devices complete after 0.435 msecs
[   10.262305] i915 0000:00:02.0: setting latency timer to 64
[   10.262314] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.262327] usb usb1: root hub lost power or was reset
[   10.266259] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.266289] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.266291] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.266295] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.266302] usb usb2: root hub lost power or was reset
[   10.270212] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.270229] pci 0000:00:1e.0: setting latency timer to 64
[   10.270233] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.270240] ahci 0000:00:1f.2: setting latency timer to 64
[   10.272237] serial 00:06: activated
[   10.273742] serial 00:07: activated
[   10.274235] r8169 0000:01:00.0: eth0: link up
[   10.275565] parport_pc 00:08: activated
[   10.329531] sd 0:0:0:0: [sda] Starting disk
[   10.329627] sd 1:0:0:0: [sdb] Starting disk
[   10.576418] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.578408] ata5: SATA link down (SStatus 0 SControl 300)
[   10.579770] ata3.00: configured for UDMA/100
[   10.580387] ata6: SATA link down (SStatus 0 SControl 300)
[   10.582341] ata4: SATA link down (SStatus 0 SControl 300)
[   10.582369] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.593391] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   10.594650] ata2.00: configured for UDMA/133
[   10.809013] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   10.809834] hub 2-1:1.0: hub_port_status failed (err = -32)
[   10.810091] hub 2-1:1.0: hub_port_status failed (err = -32)
[   10.991423] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.992018] ata1.00: configured for UDMA/133
[   10.995581] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.083617] PM: restore of devices complete after 823.206 msecs
[   11.093397] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.093399] Restarting tasks ... done.
[   11.459795] PM: Basic memory bitmaps freed
[   13.515709] ata1.00: configured for UDMA/133
[   13.515716] ata1: EH complete
[   13.601685] ata2.00: configured for UDMA/133
[   13.601692] ata2: EH complete
[   13.895880] ata1.00: configured for UDMA/133
[   13.895887] ata1: EH complete
[   13.976424] ata2.00: configured for UDMA/133
[   13.976431] ata2: EH complete
[  354.954627] ata1.00: configured for UDMA/133
[  354.954634] ata1: EH complete
[  355.311264] ata2.00: configured for UDMA/133
[  355.311272] ata2: EH complete
[  356.140513] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[  356.140517] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[  356.141300] PM: Basic memory bitmaps created
[  357.391512] Syncing filesystems ... done.
[  357.437197] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  357.448068] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  357.462173] PM: Preallocating image memory... done (allocated 555949 pages)
[  357.769188] PM: Allocated 2223796 kbytes in 0.30 seconds (7412.65 MB/s)
[  357.769190] Suspending console(s) (use no_console_suspend to debug)
[  357.769811] parport_pc 00:08: disabled
[  357.770076] serial 00:07: disabled
[  357.770338] serial 00:06: disabled
[  357.770443] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[  357.770482] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  357.872085] HDA Intel 0000:00:1b.0: PCI INT A disabled
[  357.872110] ACPI handle has no context!
[  357.883005] PM: freeze of devices complete after 113.916 msecs
[  357.883230] PM: late freeze of devices complete after 0.223 msecs
[  357.883548] ACPI: Preparing to enter system sleep state S4
[  357.884401] PM: Saving platform NVS memory
[  357.887945] Disabling non-boot CPUs ...
[  357.901372] CPU 1 is now offline
[  357.917288] CPU 2 is now offline
[  357.932980] CPU 3 is now offline
[  357.932982] SMP alternatives: switching to UP code
[  357.937331] PM: Creating hibernation image:
[  357.983677] PM: Need to copy 431689 pages
[  357.983679] PM: Normal pages needed: 431689 + 1024, available pages: 565364
[    9.864612] PM: Restoring platform NVS memory
[    9.868056] Enabling non-boot CPUs ...
[    9.870756] SMP alternatives: switching to SMP code
[    9.874322] Booting Node 0 Processor 1 APIC 0x4
[    9.969800] CPU1 is up
[    9.970050] Booting Node 0 Processor 2 APIC 0x1
[   10.072783] CPU2 is up
[   10.073111] Booting Node 0 Processor 3 APIC 0x5
[   10.176677] CPU3 is up
[   10.177807] ACPI: Waking up from system sleep state S4
[   10.178342] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.178488] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.178562] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.178629] PM: early restore of devices complete after 0.425 msecs
[   10.275511] i915 0000:00:02.0: setting latency timer to 64
[   10.275524] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.275533] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.275537] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.275540] usb usb1: root hub lost power or was reset
[   10.279451] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.279474] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.279512] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.279522] usb usb2: root hub lost power or was reset
[   10.283427] pci 0000:00:1e.0: setting latency timer to 64
[   10.283440] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.283442] ahci 0000:00:1f.2: setting latency timer to 64
[   10.285523] serial 00:06: activated
[   10.286820] r8169 0000:01:00.0: eth0: link up
[   10.287037] serial 00:07: activated
[   10.288925] parport_pc 00:08: activated
[   10.310864] sd 0:0:0:0: [sda] Starting disk
[   10.331811] sd 1:0:0:0: [sdb] Starting disk
[   10.590119] ata5: SATA link down (SStatus 0 SControl 300)
[   10.592110] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.593073] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.596111] ata6: SATA link down (SStatus 0 SControl 300)
[   10.596690] ata3.00: configured for UDMA/100
[   10.597139] ata4: SATA link down (SStatus 0 SControl 300)
[   10.604206] ata2.00: configured for UDMA/133
[   10.606088] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   10.821597] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.004124] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.004647] ata1.00: configured for UDMA/133
[   11.038095] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.038292] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.211855] usb 2-1.3: reset high speed USB device using ehci_hcd and address 3
[   11.299853] PM: restore of devices complete after 1026.704 msecs
[   11.309388] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.309390] Restarting tasks ... done.
[   11.620154] PM: Basic memory bitmaps freed
[   13.696598] ata1.00: configured for UDMA/133
[   13.696603] ata1: EH complete
[   14.057716] ata2.00: configured for UDMA/133
[   14.057723] ata2: EH complete
[   14.464596] ata1.00: configured for UDMA/133
[   14.464600] ata1: EH complete
[   14.553294] ata2.00: configured for UDMA/133
[   14.553301] ata2: EH complete
[  214.142340] usb 2-1.3: USB disconnect, address 3
[  214.331308] usb 2-1.3: new high speed USB device using ehci_hcd and address 9
[  214.422956] usb 2-1.3: New USB device found, idVendor=05e3, idProduct=0716
[  214.422962] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[  214.422966] usb 2-1.3: Product: USB Storage
[  214.422969] usb 2-1.3: SerialNumber: 000000009744
[  214.423786] scsi12 : usb-storage 2-1.3:1.0
[  215.423218] scsi 12:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9744 PQ: 0 ANSI: 0
[  215.423524] sd 12:0:0:0: Attached scsi generic sg3 type 0
[  215.429276] scsi 12:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9744 PQ: 0 ANSI: 0
[  215.429441] sd 12:0:0:1: Attached scsi generic sg4 type 0
[  215.431083] sd 12:0:0:0: [sdc] Attached SCSI removable disk
[  215.433497] sd 12:0:0:1: [sdd] Attached SCSI removable disk
[  225.035266] usb 2-1.4: new high speed USB device using ehci_hcd and address 10
[  225.187738] usb 2-1.4: New USB device found, idVendor=0e21, idProduct=0750
[  225.187744] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  225.187748] usb 2-1.4: Product: iAUDIO 7
[  225.187751] usb 2-1.4: Manufacturer: COWON Systems, Inc.
[  225.187754] usb 2-1.4: SerialNumber: 05032511455603B2C40000402B55B7F8
[  225.188476] scsi13 : usb-storage 2-1.4:1.0
[  228.039308] scsi 13:0:0:0: Direct-Access     COWON    iAUDIO 7         0100 PQ: 0 ANSI: 0
[  228.039544] sd 13:0:0:0: Attached scsi generic sg5 type 0
[  228.040657] sd 13:0:0:0: [sde] 32309248 512-byte logical blocks: (16.5 GB/15.4 GiB)
[  228.047058] sd 13:0:0:0: [sde] Write Protect is off
[  228.047062] sd 13:0:0:0: [sde] Mode Sense: 37 00 00 08
[  228.047065] sd 13:0:0:0: [sde] Assuming drive cache: write through
[  228.060565] sd 13:0:0:0: [sde] Assuming drive cache: write through
[  228.060571]  sde:
[  228.063516] sd 13:0:0:0: [sde] Assuming drive cache: write through
[  228.063520] sd 13:0:0:0: [sde] Attached SCSI removable disk
[ 1238.402730] usb 2-1.4: USB disconnect, address 10
[ 1745.826184] ata1.00: configured for UDMA/133
[ 1745.826191] ata1: EH complete
[ 1746.183101] ata2.00: configured for UDMA/133
[ 1746.183109] ata2: EH complete
[ 1747.710845] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1747.710849] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 1747.711542] PM: Basic memory bitmaps created
[ 1748.949012] Syncing filesystems ... done.
[ 1749.004364] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1749.015296] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1749.029394] PM: Preallocating image memory... done (allocated 555949 pages)
[ 1749.326714] PM: Allocated 2223796 kbytes in 0.29 seconds (7668.26 MB/s)
[ 1749.326715] Suspending console(s) (use no_console_suspend to debug)
[ 1749.327310] parport_pc 00:08: disabled
[ 1749.327578] serial 00:07: disabled
[ 1749.327841] serial 00:06: disabled
[ 1749.327946] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1749.327992] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1749.429361] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1749.429385] ACPI handle has no context!
[ 1749.440271] PM: freeze of devices complete after 113.657 msecs
[ 1749.440498] PM: late freeze of devices complete after 0.224 msecs
[ 1749.440815] ACPI: Preparing to enter system sleep state S4
[ 1749.441661] PM: Saving platform NVS memory
[ 1749.445162] Disabling non-boot CPUs ...
[ 1749.458694] CPU 1 is now offline
[ 1749.470680] CPU 2 is now offline
[ 1749.486257] CPU 3 is now offline
[ 1749.486259] SMP alternatives: switching to UP code
[ 1749.490539] PM: Creating hibernation image:
[ 1749.534205] PM: Need to copy 431528 pages
[ 1749.534207] PM: Normal pages needed: 431528 + 1024, available pages: 565525
[   10.927605] PM: Restoring platform NVS memory
[   10.931051] Enabling non-boot CPUs ...
[   10.933821] SMP alternatives: switching to SMP code
[   10.937382] Booting Node 0 Processor 1 APIC 0x4
[   11.032866] CPU1 is up
[   11.033091] Booting Node 0 Processor 2 APIC 0x1
[   11.135863] CPU2 is up
[   11.136188] Booting Node 0 Processor 3 APIC 0x5
[   11.239734] CPU3 is up
[   11.240864] ACPI: Waking up from system sleep state S4
[   11.241334] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[   11.241400] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.241545] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.241619] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.241686] PM: early restore of devices complete after 0.429 msecs
[   11.325637] i915 0000:00:02.0: setting latency timer to 64
[   11.325644] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.325653] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.325657] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.325658] usb usb1: root hub lost power or was reset
[   11.329594] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.329615] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.329651] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.329659] usb usb2: root hub lost power or was reset
[   11.329661] pci 0000:00:1e.0: setting latency timer to 64
[   11.333576] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.333594] ahci 0000:00:1f.2: setting latency timer to 64
[   11.335331] serial 00:06: activated
[   11.336616] serial 00:07: activated
[   11.336851] r8169 0000:01:00.0: eth0: link up
[   11.338194] parport_pc 00:08: activated
[   11.356983] sd 0:0:0:0: [sda] Starting disk
[   11.377924] sd 1:0:0:0: [sdb] Starting disk
[   11.637234] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.637958] ata1.00: configured for UDMA/133
[   11.639166] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.641225] ata6: SATA link down (SStatus 0 SControl 300)
[   11.643222] ata5: SATA link down (SStatus 0 SControl 300)
[   11.645152] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.647213] ata4: SATA link down (SStatus 0 SControl 300)
[   11.648458] ata3.00: configured for UDMA/100
[   11.651285] ata2.00: configured for UDMA/133
[   11.656129] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.871685] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.872725] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.872966] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.058443] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   12.146384] PM: restore of devices complete after 822.640 msecs
[   12.156119] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.156121] Restarting tasks ... done.
[   12.457235] PM: Basic memory bitmaps freed
[   14.460181] ata1.00: configured for UDMA/133
[   14.460186] ata1: EH complete
[   14.543758] ata2.00: configured for UDMA/133
[   14.543768] ata2: EH complete
[   15.326869] ata1.00: configured for UDMA/133
[   15.326873] ata1: EH complete
[   15.678135] ata2.00: configured for UDMA/133
[   15.678142] ata2: EH complete
[16666.068683] ata1.00: configured for UDMA/133
[16666.068687] ata1: EH complete
[16666.422430] ata2.00: configured for UDMA/133
[16666.422439] ata2: EH complete
[16667.266432] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[16667.266436] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[16667.267186] PM: Basic memory bitmaps created
[16668.542844] Syncing filesystems ... done.
[16668.622067] Freezing user space processes ... (elapsed 0.01 seconds) done.
[16668.633123] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[16668.647264] PM: Preallocating image memory... done (allocated 555949 pages)
[16669.321468] PM: Allocated 2223796 kbytes in 0.67 seconds (3319.09 MB/s)
[16669.321470] Suspending console(s) (use no_console_suspend to debug)
[16669.321764] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[16669.322140] parport_pc 00:08: disabled
[16669.322406] serial 00:07: disabled
[16669.322674] serial 00:06: disabled
[16669.424311] HDA Intel 0000:00:1b.0: PCI INT A disabled
[16669.424336] ACPI handle has no context!
[16669.522035] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[16669.588010] PM: freeze of devices complete after 266.986 msecs
[16669.588242] PM: late freeze of devices complete after 0.229 msecs
[16669.588519] ACPI: Preparing to enter system sleep state S4
[16669.589368] PM: Saving platform NVS memory
[16669.592896] Disabling non-boot CPUs ...
[16669.610220] CPU 1 is now offline
[16669.629169] CPU 2 is now offline
[16669.648845] CPU 3 is now offline
[16669.648846] SMP alternatives: switching to UP code
[16669.653074] PM: Creating hibernation image:
[16669.698098] PM: Need to copy 432190 pages
[16669.698100] PM: Normal pages needed: 432190 + 1024, available pages: 564863
[   10.641324] PM: Restoring platform NVS memory
[   10.644768] Enabling non-boot CPUs ...
[   10.647589] SMP alternatives: switching to SMP code
[   10.651150] Booting Node 0 Processor 1 APIC 0x4
[   10.746629] CPU1 is up
[   10.746876] Booting Node 0 Processor 2 APIC 0x1
[   10.849623] CPU2 is up
[   10.849950] Booting Node 0 Processor 3 APIC 0x5
[   10.953505] CPU3 is up
[   10.954645] ACPI: Waking up from system sleep state S4
[   10.955123] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   10.955189] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.955334] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.955407] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.955474] PM: early restore of devices complete after 0.428 msecs
[   11.039228] i915 0000:00:02.0: setting latency timer to 64
[   11.039233] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.039240] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.039243] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.039249] usb usb1: root hub lost power or was reset
[   11.043177] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.043203] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.043242] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.043250] usb usb2: root hub lost power or was reset
[   11.047163] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.047165] pci 0000:00:1e.0: setting latency timer to 64
[   11.047168] ahci 0000:00:1f.2: setting latency timer to 64
[   11.049173] serial 00:06: activated
[   11.050712] serial 00:07: activated
[   11.050800] r8169 0000:01:00.0: eth0: link up
[   11.052569] parport_pc 00:08: activated
[   11.094741] sd 0:0:0:0: [sda] Starting disk
[   11.106496] sd 1:0:0:0: [sdb] Starting disk
[   11.350987] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.353978] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.354975] ata6: SATA link down (SStatus 0 SControl 300)
[   11.356955] ata5: SATA link down (SStatus 0 SControl 300)
[   11.357221] ata3.00: configured for UDMA/100
[   11.358906] ata4: SATA link down (SStatus 0 SControl 300)
[   11.360965] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.361583] ata1.00: configured for UDMA/133
[   11.362975] ata2.00: configured for UDMA/133
[   11.371106] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.586466] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.587424] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.587673] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.773148] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   11.861092] PM: restore of devices complete after 823.755 msecs
[   11.870799] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.870801] Restarting tasks ... done.
[   12.253807] PM: Basic memory bitmaps freed
[   14.087657] ata1.00: configured for UDMA/133
[   14.087664] ata1: EH complete
[   14.439699] ata2.00: configured for UDMA/133
[   14.439704] ata2: EH complete
[   14.912242] ata1.00: configured for UDMA/133
[   14.912246] ata1: EH complete
[   15.001475] ata2.00: configured for UDMA/133
[   15.001488] ata2: EH complete
[ 6313.777554] ata1.00: configured for UDMA/133
[ 6313.777558] ata1: EH complete
[ 6314.129846] ata2.00: configured for UDMA/133
[ 6314.129854] ata2: EH complete
[ 6315.363761] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 6315.363765] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 6315.364551] PM: Basic memory bitmaps created
[ 6316.692737] Syncing filesystems ... done.
[ 6316.805894] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6316.816718] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6316.830806] PM: Preallocating image memory... done (allocated 555980 pages)
[ 6317.851988] PM: Allocated 2223920 kbytes in 1.02 seconds (2180.31 MB/s)
[ 6317.851990] Suspending console(s) (use no_console_suspend to debug)
[ 6317.852229] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 6317.852650] parport_pc 00:08: disabled
[ 6317.852952] serial 00:07: disabled
[ 6317.853219] serial 00:06: disabled
[ 6318.051838] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6318.054898] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 6318.054923] ACPI handle has no context!
[ 6318.118804] PM: freeze of devices complete after 267.265 msecs
[ 6318.119041] PM: late freeze of devices complete after 0.234 msecs
[ 6318.119320] ACPI: Preparing to enter system sleep state S4
[ 6318.120176] PM: Saving platform NVS memory
[ 6318.123710] Disabling non-boot CPUs ...
[ 6318.140979] CPU 1 is now offline
[ 6318.156829] CPU 2 is now offline
[ 6318.172661] CPU 3 is now offline
[ 6318.172662] SMP alternatives: switching to UP code
[ 6318.176868] PM: Creating hibernation image:
[ 6318.221954] PM: Need to copy 432076 pages
[ 6318.221956] PM: Normal pages needed: 432076 + 1024, available pages: 564976
[   10.385429] PM: Restoring platform NVS memory
[   10.388876] Enabling non-boot CPUs ...
[   10.391718] SMP alternatives: switching to SMP code
[   10.395279] Booting Node 0 Processor 1 APIC 0x4
[   10.490755] CPU1 is up
[   10.491000] Booting Node 0 Processor 2 APIC 0x1
[   10.593743] CPU2 is up
[   10.594049] Booting Node 0 Processor 3 APIC 0x5
[   10.696619] CPU3 is up
[   10.697752] ACPI: Waking up from system sleep state S4
[   10.698227] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[   10.698293] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.698438] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.698512] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.698578] PM: early restore of devices complete after 0.428 msecs
[   10.788808] i915 0000:00:02.0: setting latency timer to 64
[   10.788821] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.788835] usb usb1: root hub lost power or was reset
[   10.792748] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.792760] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.792763] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.792797] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.792844] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.792854] pci 0000:00:1e.0: setting latency timer to 64
[   10.792867] ahci 0000:00:1f.2: setting latency timer to 64
[   10.792920] usb usb2: root hub lost power or was reset
[   10.796866] r8169 0000:01:00.0: eth0: link up
[   10.796875] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.799430] serial 00:06: activated
[   10.801407] serial 00:07: activated
[   10.803849] parport_pc 00:08: activated
[   10.816866] sd 0:0:0:0: [sda] Starting disk
[   10.819494] sd 1:0:0:0: [sdb] Starting disk
[   11.101095] ata4: SATA link down (SStatus 0 SControl 300)
[   11.103077] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.105075] ata6: SATA link down (SStatus 0 SControl 300)
[   11.107075] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.109066] ata5: SATA link down (SStatus 0 SControl 300)
[   11.110397] ata3.00: configured for UDMA/100
[   11.115333] ata2.00: configured for UDMA/133
[   11.119983] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.335747] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.516088] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.516841] ata1.00: configured for UDMA/133
[   11.551978] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.552225] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.725739] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   11.813567] PM: restore of devices complete after 1027.130 msecs
[   11.823134] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.823136] Restarting tasks ... done.
[   12.133345] PM: Basic memory bitmaps freed
[   13.996041] ata1.00: configured for UDMA/133
[   13.996048] ata1: EH complete
[   14.347668] ata2.00: configured for UDMA/133
[   14.347677] ata2: EH complete
[   14.615788] ata1.00: configured for UDMA/133
[   14.615792] ata1: EH complete
[   14.689341] ata2.00: configured for UDMA/133
[   14.689349] ata2: EH complete
[  129.728964] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  129.728974] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  129.728982] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  129.728992] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  129.729008] end_request: I/O error, dev sr0, sector 0
[  129.729014] Buffer I/O error on device sr0, logical block 0
[  129.731981] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  129.731987] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  129.731992] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  129.731998] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  129.732009] end_request: I/O error, dev sr0, sector 0
[  129.732012] Buffer I/O error on device sr0, logical block 0
[  129.735159] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  129.735168] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  129.735176] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  129.735185] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  129.735199] end_request: I/O error, dev sr0, sector 0
[  129.735204] Buffer I/O error on device sr0, logical block 0
[11777.595368] npviewer.bin[23260]: segfault at 0 ip 00000000f609ddb1 sp 00000000ff817980 error 4 in libflashplayer.so[f5cff000+b2c000]
[26336.423106] ata1.00: configured for UDMA/133
[26336.423113] ata1: EH complete
[26336.820413] ata2.00: configured for UDMA/133
[26336.820419] ata2: EH complete
[26338.004307] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[26338.004312] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[26338.005287] PM: Basic memory bitmaps created
[26339.305191] Syncing filesystems ... done.
[26339.361675] Freezing user space processes ... (elapsed 0.01 seconds) done.
[26339.372618] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[26339.386702] PM: Preallocating image memory... done (allocated 555949 pages)
[26339.677352] PM: Allocated 2223796 kbytes in 0.29 seconds (7668.26 MB/s)
[26339.677354] Suspending console(s) (use no_console_suspend to debug)
[26339.677975] parport_pc 00:08: disabled
[26339.678240] serial 00:07: disabled
[26339.678501] serial 00:06: disabled
[26339.678611] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[26339.678666] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[26339.880456] HDA Intel 0000:00:1b.0: PCI INT A disabled
[26339.880480] ACPI handle has no context!
[26339.891356] PM: freeze of devices complete after 214.326 msecs
[26339.891584] PM: late freeze of devices complete after 0.225 msecs
[26339.891900] ACPI: Preparing to enter system sleep state S4
[26339.892745] PM: Saving platform NVS memory
[26339.896286] Disabling non-boot CPUs ...
[26339.909991] CPU 1 is now offline
[26339.925509] CPU 2 is now offline
[26339.941333] CPU 3 is now offline
[26339.941335] SMP alternatives: switching to UP code
[26339.945643] PM: Creating hibernation image:
[26339.988576] PM: Need to copy 431652 pages
[26339.988579] PM: Normal pages needed: 431652 + 1024, available pages: 565401
[   10.162069] PM: Restoring platform NVS memory
[   10.165513] Enabling non-boot CPUs ...
[   10.168251] SMP alternatives: switching to SMP code
[   10.171812] Booting Node 0 Processor 1 APIC 0x4
[   10.267299] CPU1 is up
[   10.267547] Booting Node 0 Processor 2 APIC 0x1
[   10.370295] CPU2 is up
[   10.370628] Booting Node 0 Processor 3 APIC 0x5
[   10.474177] CPU3 is up
[   10.475317] ACPI: Waking up from system sleep state S4
[   10.475795] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   10.475862] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.476010] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.476084] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.476151] PM: early restore of devices complete after 0.434 msecs
[   10.565535] i915 0000:00:02.0: setting latency timer to 64
[   10.565542] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.565556] usb usb1: root hub lost power or was reset
[   10.569477] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.569492] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.569494] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.569498] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.569502] usb usb2: root hub lost power or was reset
[   10.573438] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.573455] pci 0000:00:1e.0: setting latency timer to 64
[   10.573462] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.573469] ahci 0000:00:1f.2: setting latency timer to 64
[   10.575101] serial 00:06: activated
[   10.576407] serial 00:07: activated
[   10.577322] r8169 0000:01:00.0: eth0: link up
[   10.578079] parport_pc 00:08: activated
[   10.612239] sd 0:0:0:0: [sda] Starting disk
[   10.632409] sd 1:0:0:0: [sdb] Starting disk
[   10.877649] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.879659] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.880341] ata1.00: configured for UDMA/133
[   10.881576] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.883569] ata6: SATA link down (SStatus 0 SControl 300)
[   10.884842] ata3.00: configured for UDMA/100
[   10.885702] ata5: SATA link down (SStatus 0 SControl 300)
[   10.887549] ata4: SATA link down (SStatus 0 SControl 300)
[   10.889787] ata2.00: configured for UDMA/133
[   10.896566] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.112089] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.328581] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.328825] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.502381] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   11.591397] PM: restore of devices complete after 1028.222 msecs
[   11.600969] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.600971] Restarting tasks ... done.
[   11.916260] PM: Basic memory bitmaps freed
[   13.652374] ata1.00: configured for UDMA/133
[   13.652381] ata1: EH complete
[   14.025833] ata2.00: configured for UDMA/133
[   14.025841] ata2: EH complete
[   14.987141] ata1.00: configured for UDMA/133
[   14.987145] ata1: EH complete
[   15.380321] ata2.00: configured for UDMA/133
[   15.380328] ata2: EH complete
[ 2527.619103] npviewer.bin[32165]: segfault at 0 ip 00000000f6074db1 sp 00000000ff928c70 error 4 in libflashplayer.so[f5cd6000+b2c000]
[ 2570.951230] npviewer.bin[9448]: segfault at f28a4004 ip 00000000f63c964c sp 00000000ffe76fd0 error 4 in libflashplayer.so[f5d91000+b2c000]
[30256.232193] npviewer.bin[10011]: segfault at da3a704c ip 00000000f60ebdc7 sp 00000000ff978c00 error 4 in libflashplayer.so[f5d4d000+b2c000]
[36833.321909] usb 2-1.4: new high speed USB device using ehci_hcd and address 11
[36833.408146] usb 2-1.4: New USB device found, idVendor=0e21, idProduct=0750
[36833.408152] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36833.408156] usb 2-1.4: Product: iAUDIO 7
[36833.408159] usb 2-1.4: Manufacturer: COWON Systems, Inc.
[36833.408162] usb 2-1.4: SerialNumber: 05032511455603B2C40000402B55B7F8
[36833.408560] scsi14 : usb-storage 2-1.4:1.0
[36836.936033] scsi 14:0:0:0: Direct-Access     COWON    iAUDIO 7         0100 PQ: 0 ANSI: 0
[36836.936315] sd 14:0:0:0: Attached scsi generic sg5 type 0
[36836.938738] sd 14:0:0:0: [sde] 32309248 512-byte logical blocks: (16.5 GB/15.4 GiB)
[36836.939156] sd 14:0:0:0: [sde] Write Protect is off
[36836.939161] sd 14:0:0:0: [sde] Mode Sense: 37 00 00 08
[36836.939165] sd 14:0:0:0: [sde] Assuming drive cache: write through
[36836.942718] sd 14:0:0:0: [sde] Assuming drive cache: write through
[36836.942723]  sde:
[36836.946247] sd 14:0:0:0: [sde] Assuming drive cache: write through
[36836.946253] sd 14:0:0:0: [sde] Attached SCSI removable disk
[36866.861953] usb 2-1.4: USB disconnect, address 11
[36883.385508] usb 2-1.4: new high speed USB device using ehci_hcd and address 12
[36883.471118] usb 2-1.4: New USB device found, idVendor=0e21, idProduct=0750
[36883.471123] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36883.471128] usb 2-1.4: Product: iAUDIO 7
[36883.471130] usb 2-1.4: Manufacturer: COWON Systems, Inc.
[36883.471133] usb 2-1.4: SerialNumber: 05032511455603B2C40000402B55B7F8
[36883.471517] scsi15 : usb-storage 2-1.4:1.0
[36885.577613] scsi 15:0:0:0: Direct-Access     COWON    iAUDIO 7         0100 PQ: 0 ANSI: 0
[36885.577898] sd 15:0:0:0: Attached scsi generic sg5 type 0
[36885.581456] sd 15:0:0:0: [sde] 32309248 512-byte logical blocks: (16.5 GB/15.4 GiB)
[36885.582807] sd 15:0:0:0: [sde] Write Protect is off
[36885.582815] sd 15:0:0:0: [sde] Mode Sense: 37 00 00 08
[36885.582820] sd 15:0:0:0: [sde] Assuming drive cache: write through
[36885.585534] sd 15:0:0:0: [sde] Assuming drive cache: write through
[36885.585539]  sde:
[36885.588233] sd 15:0:0:0: [sde] Assuming drive cache: write through
[36885.588237] sd 15:0:0:0: [sde] Attached SCSI removable disk
[37201.215191] usb 2-1.4: USB disconnect, address 12
[37215.950804] usb 2-1.4: new high speed USB device using ehci_hcd and address 13
[37216.109136] usb 2-1.4: New USB device found, idVendor=0e21, idProduct=0750
[37216.109144] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[37216.109149] usb 2-1.4: Product: iAUDIO 7
[37216.109153] usb 2-1.4: Manufacturer: COWON Systems, Inc.
[37216.109157] usb 2-1.4: SerialNumber: 05032511455603B2C40000402B55B7F8
[37216.109871] scsi16 : usb-storage 2-1.4:1.0
[37217.107682] scsi 16:0:0:0: Direct-Access     COWON    iAUDIO 7         0100 PQ: 0 ANSI: 0
[37217.107961] sd 16:0:0:0: Attached scsi generic sg5 type 0
[37217.109241] sd 16:0:0:0: [sde] 32309248 512-byte logical blocks: (16.5 GB/15.4 GiB)
[37217.109649] sd 16:0:0:0: [sde] Write Protect is off
[37217.109656] sd 16:0:0:0: [sde] Mode Sense: 37 00 00 08
[37217.109661] sd 16:0:0:0: [sde] Assuming drive cache: write through
[37217.116130] sd 16:0:0:0: [sde] Assuming drive cache: write through
[37217.116139]  sde:
[37217.120417] sd 16:0:0:0: [sde] Assuming drive cache: write through
[37217.120421] sd 16:0:0:0: [sde] Attached SCSI removable disk
[39005.709629] usb 2-1.4: USB disconnect, address 13
[39284.649710] usb 2-1.4: new high speed USB device using ehci_hcd and address 14
[39284.735264] usb 2-1.4: New USB device found, idVendor=0e21, idProduct=0750
[39284.735269] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[39284.735274] usb 2-1.4: Product: iAUDIO 7
[39284.735276] usb 2-1.4: Manufacturer: COWON Systems, Inc.
[39284.735279] usb 2-1.4: SerialNumber: 05032511455603B2C40000402B55B7F8
[39284.735976] scsi17 : usb-storage 2-1.4:1.0
[39288.936124] scsi 17:0:0:0: Direct-Access     COWON    iAUDIO 7         0100 PQ: 0 ANSI: 0
[39288.936396] sd 17:0:0:0: Attached scsi generic sg5 type 0
[39288.939704] sd 17:0:0:0: [sde] 32309248 512-byte logical blocks: (16.5 GB/15.4 GiB)
[39288.940121] sd 17:0:0:0: [sde] Write Protect is off
[39288.940124] sd 17:0:0:0: [sde] Mode Sense: 37 00 00 08
[39288.940127] sd 17:0:0:0: [sde] Assuming drive cache: write through
[39288.942190] sd 17:0:0:0: [sde] Assuming drive cache: write through
[39288.942195]  sde:
[39288.944318] sd 17:0:0:0: [sde] Assuming drive cache: write through
[39288.944322] sd 17:0:0:0: [sde] Attached SCSI removable disk
[39576.937143] usb 2-1.4: USB disconnect, address 14
[40302.780184] usb 2-1.4: new high speed USB device using ehci_hcd and address 15
[40302.865795] usb 2-1.4: New USB device found, idVendor=0e21, idProduct=0750
[40302.865801] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[40302.865805] usb 2-1.4: Product: iAUDIO 7
[40302.865808] usb 2-1.4: Manufacturer: COWON Systems, Inc.
[40302.865811] usb 2-1.4: SerialNumber: 05032511455603B2C40000402B55B7F8
[40302.866265] scsi18 : usb-storage 2-1.4:1.0
[40307.956224] scsi 18:0:0:0: Direct-Access     COWON    iAUDIO 7         0100 PQ: 0 ANSI: 0
[40307.956521] sd 18:0:0:0: Attached scsi generic sg5 type 0
[40307.957130] sd 18:0:0:0: [sde] 32309248 512-byte logical blocks: (16.5 GB/15.4 GiB)
[40307.958346] sd 18:0:0:0: [sde] Write Protect is off
[40307.958353] sd 18:0:0:0: [sde] Mode Sense: 37 00 00 08
[40307.958357] sd 18:0:0:0: [sde] Assuming drive cache: write through
[40307.965467] sd 18:0:0:0: [sde] Assuming drive cache: write through
[40307.965474]  sde:
[40307.967961] sd 18:0:0:0: [sde] Assuming drive cache: write through
[40307.967966] sd 18:0:0:0: [sde] Attached SCSI removable disk
[40387.149973] usb 2-1.4: USB disconnect, address 15
[43360.255625] ata1.00: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x6
[43360.255628] ata1.00: irq_stat 0x40000001
[43360.255642] ata1: SError: { HostInt 10B8B }
[43360.255644] ata1.00: failed command: SET FEATURES
[43360.255648] ata1.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
[43360.255648]          res 51/04:fe:00:00:00/00:00:00:00:00/40 Emask 0x41 (internal error)
[43360.255650] ata1.00: status: { DRDY ERR }
[43360.255651] ata1.00: error: { ABRT }
[43360.255655] ata1: hard resetting link
[43360.559975] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[43360.560573] ata1.00: configured for UDMA/133
[43360.560596] ata1: EH complete
[43360.562377] ata1.00: configured for UDMA/133
[43360.562383] ata1: EH complete
[43360.918912] ata2.00: configured for UDMA/133
[43360.918920] ata2: EH complete
[43361.670591] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[43361.670595] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[43361.671363] PM: Basic memory bitmaps created
[43362.935189] Syncing filesystems ... done.
[43362.997691] Freezing user space processes ... (elapsed 0.01 seconds) done.
[43363.008548] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[43363.022622] PM: Preallocating image memory... done (allocated 555918 pages)
[43363.981425] PM: Allocated 2223672 kbytes in 0.96 seconds (2316.32 MB/s)
[43363.981427] Suspending console(s) (use no_console_suspend to debug)
[43363.981665] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[43363.982113] parport_pc 00:08: disabled
[43363.982388] serial 00:07: disabled
[43363.982655] serial 00:06: disabled
[43364.181846] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[43364.184898] HDA Intel 0000:00:1b.0: PCI INT A disabled
[43364.184923] ACPI handle has no context!
[43364.247796] PM: freeze of devices complete after 266.812 msecs
[43364.248038] PM: late freeze of devices complete after 0.239 msecs
[43364.248305] ACPI: Preparing to enter system sleep state S4
[43364.249154] PM: Saving platform NVS memory
[43364.252716] Disabling non-boot CPUs ...
[43364.269967] CPU 1 is now offline
[43364.285957] CPU 2 is now offline
[43364.301658] CPU 3 is now offline
[43364.301659] SMP alternatives: switching to UP code
[43364.305850] PM: Creating hibernation image:
[43364.350246] PM: Need to copy 432312 pages
[43364.350248] PM: Normal pages needed: 432312 + 1024, available pages: 564741
[   11.183146] PM: Restoring platform NVS memory
[   11.186591] Enabling non-boot CPUs ...
[   11.189441] SMP alternatives: switching to SMP code
[   11.193003] Booting Node 0 Processor 1 APIC 0x4
[   11.288476] CPU1 is up
[   11.288724] Booting Node 0 Processor 2 APIC 0x1
[   11.391482] CPU2 is up
[   11.391814] Booting Node 0 Processor 3 APIC 0x5
[   11.495358] CPU3 is up
[   11.496505] ACPI: Waking up from system sleep state S4
[   11.497044] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.497192] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.497267] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.497334] PM: early restore of devices complete after 0.431 msecs
[   11.587319] i915 0000:00:02.0: setting latency timer to 64
[   11.587335] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.587347] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.587349] usb usb1: root hub lost power or was reset
[   11.587351] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.591280] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.591309] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.591356] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.591362] pci 0000:00:1e.0: setting latency timer to 64
[   11.591372] usb usb2: root hub lost power or was reset
[   11.595298] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.595303] ahci 0000:00:1f.2: setting latency timer to 64
[   11.595629] sd 0:0:0:0: [sda] Starting disk
[   11.595656] sd 1:0:0:0: [sdb] Starting disk
[   11.597435] serial 00:06: activated
[   11.598643] r8169 0000:01:00.0: eth0: link up
[   11.598946] serial 00:07: activated
[   11.600819] parport_pc 00:08: activated
[   11.898823] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.899562] ata1.00: configured for UDMA/133
[   11.903813] ata5: SATA link down (SStatus 0 SControl 300)
[   11.904754] ata6: SATA link down (SStatus 0 SControl 300)
[   11.907800] ata4: SATA link down (SStatus 0 SControl 300)
[   11.908923] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.908944] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.912170] ata3.00: configured for UDMA/100
[   11.917724] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.920979] ata2.00: configured for UDMA/133
[   12.133301] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   12.349748] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.349994] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.523524] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   12.611514] PM: restore of devices complete after 1026.554 msecs
[   12.621078] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.621080] Restarting tasks ... done.
[   12.923624] PM: Basic memory bitmaps freed
[   15.123173] ata1.00: configured for UDMA/133
[   15.123180] ata1: EH complete
[   15.205533] ata2.00: configured for UDMA/133
[   15.205541] ata2: EH complete
[   15.510110] ata1.00: configured for UDMA/133
[   15.510118] ata1: EH complete
[   15.590916] ata2.00: configured for UDMA/133
[   15.590923] ata2: EH complete
[ 1936.780688] ata1.00: configured for UDMA/133
[ 1936.780697] ata1: EH complete
[ 1937.141534] ata2.00: configured for UDMA/133
[ 1937.141542] ata2: EH complete
[ 1937.971773] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1937.971776] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 1937.972459] PM: Basic memory bitmaps created
[ 1939.271454] Syncing filesystems ... done.
[ 1939.331208] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1939.342013] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1939.356139] PM: Preallocating image memory... done (allocated 555949 pages)
[ 1939.713242] PM: Allocated 2223796 kbytes in 0.35 seconds (6353.70 MB/s)
[ 1939.713244] Suspending console(s) (use no_console_suspend to debug)
[ 1939.713855] parport_pc 00:08: disabled
[ 1939.714119] serial 00:07: disabled
[ 1939.714390] serial 00:06: disabled
[ 1939.714495] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1939.714538] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1939.815980] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1939.816005] ACPI handle has no context!
[ 1939.826895] PM: freeze of devices complete after 113.749 msecs
[ 1939.827120] PM: late freeze of devices complete after 0.222 msecs
[ 1939.827429] ACPI: Preparing to enter system sleep state S4
[ 1939.828262] PM: Saving platform NVS memory
[ 1939.831769] Disabling non-boot CPUs ...
[ 1939.845312] CPU 1 is now offline
[ 1939.861181] CPU 2 is now offline
[ 1939.876873] CPU 3 is now offline
[ 1939.876875] SMP alternatives: switching to UP code
[ 1939.881147] PM: Creating hibernation image:
[ 1939.925115] PM: Need to copy 431040 pages
[ 1939.925117] PM: Normal pages needed: 431040 + 1024, available pages: 566013
[   10.843762] PM: Restoring platform NVS memory
[   10.847207] Enabling non-boot CPUs ...
[   10.849981] SMP alternatives: switching to SMP code
[   10.853538] Booting Node 0 Processor 1 APIC 0x4
[   10.949025] CPU1 is up
[   10.949275] Booting Node 0 Processor 2 APIC 0x1
[   11.052020] CPU2 is up
[   11.052354] Booting Node 0 Processor 3 APIC 0x5
[   11.155892] CPU3 is up
[   11.157043] ACPI: Waking up from system sleep state S4
[   11.157582] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.157727] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.157801] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.157869] PM: early restore of devices complete after 0.425 msecs
[   11.242501] i915 0000:00:02.0: setting latency timer to 64
[   11.257984] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.257995] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.257998] usb usb1: root hub lost power or was reset
[   11.257999] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.261904] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.261925] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.261985] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.261993] usb usb2: root hub lost power or was reset
[   11.261995] pci 0000:00:1e.0: setting latency timer to 64
[   11.265923] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.265935] ahci 0000:00:1f.2: setting latency timer to 64
[   11.266210] sd 0:0:0:0: [sda] Starting disk
[   11.266239] sd 1:0:0:0: [sdb] Starting disk
[   11.268608] serial 00:06: activated
[   11.269975] r8169 0000:01:00.0: eth0: link up
[   11.270654] serial 00:07: activated
[   11.280801] parport_pc 00:08: activated
[   11.570342] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.571134] ata1.00: configured for UDMA/133
[   11.573273] ata5: SATA link down (SStatus 0 SControl 300)
[   11.574343] ata6: SATA link down (SStatus 0 SControl 300)
[   11.576336] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.578326] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.580442] ata4: SATA link down (SStatus 0 SControl 300)
[   11.581676] ata3.00: configured for UDMA/100
[   11.588367] ata2.00: configured for UDMA/133
[   11.589240] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.804755] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   12.021245] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.021491] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.195041] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   12.282981] PM: restore of devices complete after 1042.876 msecs
[   12.292516] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.292518] Restarting tasks ... done.
[   12.586609] PM: Basic memory bitmaps freed
[   14.643763] ata1.00: configured for UDMA/133
[   14.643770] ata1: EH complete
[   14.731143] ata2.00: configured for UDMA/133
[   14.731150] ata2: EH complete
[   15.179805] ata1.00: configured for UDMA/133
[   15.179812] ata1: EH complete
[   15.535663] ata2.00: configured for UDMA/133
[   15.535671] ata2: EH complete
[  713.312503] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  713.312511] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  713.312522] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  713.312530] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  713.312541] end_request: I/O error, dev sr0, sector 0
[  713.312546] Buffer I/O error on device sr0, logical block 0
[  713.314592] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  713.314598] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  713.314603] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  713.314610] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  713.314620] end_request: I/O error, dev sr0, sector 0
[  713.314624] Buffer I/O error on device sr0, logical block 0
[  713.316698] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  713.316703] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  713.316709] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  713.316715] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  713.316725] end_request: I/O error, dev sr0, sector 0
[  713.316729] Buffer I/O error on device sr0, logical block 0
[ 2082.219240] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2082.219248] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[ 2082.219254] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2082.219261] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2082.219273] end_request: I/O error, dev sr0, sector 0
[ 2082.219277] Buffer I/O error on device sr0, logical block 0
[ 2082.224130] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2082.224137] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[ 2082.224143] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2082.224150] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2082.224160] end_request: I/O error, dev sr0, sector 0
[ 2082.224165] Buffer I/O error on device sr0, logical block 0
[ 2082.226748] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2082.226754] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[ 2082.226760] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 2082.226766] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[ 2082.226777] end_request: I/O error, dev sr0, sector 0
[ 2082.226781] Buffer I/O error on device sr0, logical block 0
[ 2389.647836] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[ 2502.271458] r8169 0000:01:00.0: eth0: link down
[ 2504.603918] r8169 0000:01:00.0: eth0: link up
[ 3239.951138] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[ 5997.197592] npviewer.bin[30362]: segfault at f589a04c ip 00000000f60c5dc7 sp 00000000ff94a610 error 4 in libflashplayer.so[f5d27000+b2c000]
[16580.608534] ata1.00: configured for UDMA/133
[16580.608542] ata1: EH complete
[16580.964592] ata2.00: configured for UDMA/133
[16580.964600] ata2: EH complete
[16581.714396] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[16581.714400] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[16581.715204] PM: Basic memory bitmaps created
[16582.971545] Syncing filesystems ... done.
[16583.039912] Freezing user space processes ... (elapsed 0.01 seconds) done.
[16583.050850] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[16583.064904] PM: Preallocating image memory... done (allocated 555949 pages)
[16584.371518] PM: Allocated 2223796 kbytes in 1.30 seconds (1710.61 MB/s)
[16584.371519] Suspending console(s) (use no_console_suspend to debug)
[16584.372179] parport_pc 00:08: disabled
[16584.372473] serial 00:07: disabled
[16584.372736] serial 00:06: disabled
[16584.372847] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[16584.573358] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[16584.575387] HDA Intel 0000:00:1b.0: PCI INT A disabled
[16584.575412] ACPI handle has no context!
[16584.639312] PM: freeze of devices complete after 268.240 msecs
[16584.639553] PM: late freeze of devices complete after 0.238 msecs
[16584.639824] ACPI: Preparing to enter system sleep state S4
[16584.640654] PM: Saving platform NVS memory
[16584.644202] Disabling non-boot CPUs ...
[16584.653783] CPU 1 is now offline
[16584.665608] CPU 2 is now offline
[16584.681192] CPU 3 is now offline
[16584.681193] SMP alternatives: switching to UP code
[16584.685488] PM: Creating hibernation image:
[16584.731686] PM: Need to copy 414701 pages
[16584.731688] PM: Normal pages needed: 414701 + 1024, available pages: 582352
[   10.124164] PM: Restoring platform NVS memory
[   10.127612] Enabling non-boot CPUs ...
[   10.130362] SMP alternatives: switching to SMP code
[   10.133925] Booting Node 0 Processor 1 APIC 0x4
[   10.229409] CPU1 is up
[   10.229653] Booting Node 0 Processor 2 APIC 0x1
[   10.332394] CPU2 is up
[   10.332719] Booting Node 0 Processor 3 APIC 0x5
[   10.436275] CPU3 is up
[   10.437431] ACPI: Waking up from system sleep state S4
[   10.437966] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.438112] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.438185] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.438252] PM: early restore of devices complete after 0.424 msecs
[   10.522645] i915 0000:00:02.0: setting latency timer to 64
[   10.532407] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.532422] usb usb1: root hub lost power or was reset
[   10.536356] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.536360] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.536386] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.536420] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.539389] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.539397] usb usb2: root hub lost power or was reset
[   10.543324] pci 0000:00:1e.0: setting latency timer to 64
[   10.543340] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.548405] ahci 0000:00:1f.2: setting latency timer to 64
[   10.549071] sd 0:0:0:0: [sda] Starting disk
[   10.549137] sd 1:0:0:0: [sdb] Starting disk
[   10.552465] r8169 0000:01:00.0: eth0: link up
[   10.559159] serial 00:06: activated
[   10.562358] serial 00:07: activated
[   10.564674] parport_pc 00:08: activated
[   10.854709] ata6: SATA link down (SStatus 0 SControl 300)
[   10.855695] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   10.856273] ata1.00: configured for UDMA/133
[   10.856772] ata4: SATA link down (SStatus 0 SControl 300)
[   10.859702] ata5: SATA link down (SStatus 0 SControl 300)
[   10.861698] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.864972] ata3.00: configured for UDMA/100
[   10.871669] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.087138] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.088100] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.088348] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.273978] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   11.280698] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.292871] ata2.00: configured for UDMA/133
[   11.361555] PM: restore of devices complete after 840.904 msecs
[   11.371162] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.371164] Restarting tasks ... done.
[   11.888703] PM: Basic memory bitmaps freed
[   13.796126] ata1.00: configured for UDMA/133
[   13.796130] ata1: EH complete
[   14.175645] ata2.00: configured for UDMA/133
[   14.175653] ata2: EH complete
[   14.604167] ata1.00: configured for UDMA/133
[   14.604171] ata1: EH complete
[   14.693413] ata2.00: configured for UDMA/133
[   14.693418] ata2: EH complete
[  283.039710] usb 2-1.4: new high speed USB device using ehci_hcd and address 16
[  283.126677] usb 2-1.4: New USB device found, idVendor=0e21, idProduct=0750
[  283.126682] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  283.126686] usb 2-1.4: Product: iAUDIO 7
[  283.126689] usb 2-1.4: Manufacturer: COWON Systems, Inc.
[  283.126692] usb 2-1.4: SerialNumber: 05032511455603B2C40000402B55B7F8
[  283.127383] scsi19 : usb-storage 2-1.4:1.0
[  284.566601] scsi 19:0:0:0: Direct-Access     COWON    iAUDIO 7         0100 PQ: 0 ANSI: 0
[  284.566867] sd 19:0:0:0: Attached scsi generic sg5 type 0
[  284.567966] sd 19:0:0:0: [sde] 32309248 512-byte logical blocks: (16.5 GB/15.4 GiB)
[  284.568351] sd 19:0:0:0: [sde] Write Protect is off
[  284.568358] sd 19:0:0:0: [sde] Mode Sense: 37 00 00 08
[  284.568363] sd 19:0:0:0: [sde] Assuming drive cache: write through
[  284.570449] sd 19:0:0:0: [sde] Assuming drive cache: write through
[  284.570457]  sde:
[  284.573214] sd 19:0:0:0: [sde] Assuming drive cache: write through
[  284.573220] sd 19:0:0:0: [sde] Attached SCSI removable disk
[  685.160427] usb 2-1.4: USB disconnect, address 16
[ 1332.207934] ata1.00: configured for UDMA/133
[ 1332.207938] ata1: EH complete
[ 1332.566780] ata2.00: configured for UDMA/133
[ 1332.566788] ata2: EH complete
[ 1333.293300] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1333.293303] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 1333.293996] PM: Basic memory bitmaps created
[ 1334.533900] Syncing filesystems ... done.
[ 1334.592408] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1334.603235] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1334.617360] PM: Preallocating image memory... done (allocated 555918 pages)
[ 1334.876898] PM: Allocated 2223672 kbytes in 0.26 seconds (8552.58 MB/s)
[ 1334.876900] Suspending console(s) (use no_console_suspend to debug)
[ 1334.877191] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1334.877291] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1334.877647] parport_pc 00:08: disabled
[ 1334.877935] serial 00:07: disabled
[ 1334.878214] serial 00:06: disabled
[ 1334.979391] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1334.979416] ACPI handle has no context!
[ 1334.990314] PM: freeze of devices complete after 113.524 msecs
[ 1334.990538] PM: late freeze of devices complete after 0.221 msecs
[ 1334.990846] ACPI: Preparing to enter system sleep state S4
[ 1334.991701] PM: Saving platform NVS memory
[ 1334.995220] Disabling non-boot CPUs ...
[ 1335.008606] CPU 1 is now offline
[ 1335.024460] CPU 2 is now offline
[ 1335.040290] CPU 3 is now offline
[ 1335.040292] SMP alternatives: switching to UP code
[ 1335.044623] PM: Creating hibernation image:
[ 1335.086975] PM: Need to copy 431859 pages
[ 1335.086978] PM: Normal pages needed: 431859 + 1024, available pages: 565194
[   10.397737] PM: Restoring platform NVS memory
[   10.401182] Enabling non-boot CPUs ...
[   10.403900] SMP alternatives: switching to SMP code
[   10.407460] Booting Node 0 Processor 1 APIC 0x4
[   10.502938] CPU1 is up
[   10.503194] Booting Node 0 Processor 2 APIC 0x1
[   10.605943] CPU2 is up
[   10.606274] Booting Node 0 Processor 3 APIC 0x5
[   10.709827] CPU3 is up
[   10.710971] ACPI: Waking up from system sleep state S4
[   10.711511] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.711660] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.711734] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.711802] PM: early restore of devices complete after 0.432 msecs
[   10.802698] i915 0000:00:02.0: setting latency timer to 64
[   10.802710] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.802717] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.802721] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.802727] usb usb1: root hub lost power or was reset
[   10.806659] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.806677] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.806712] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.806721] usb usb2: root hub lost power or was reset
[   10.810641] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.810643] pci 0000:00:1e.0: setting latency timer to 64
[   10.810653] ahci 0000:00:1f.2: setting latency timer to 64
[   10.812764] serial 00:06: activated
[   10.814094] r8169 0000:01:00.0: eth0: link up
[   10.814339] serial 00:07: activated
[   10.816293] parport_pc 00:08: activated
[   10.838031] sd 0:0:0:0: [sda] Starting disk
[   10.858967] sd 1:0:0:0: [sdb] Starting disk
[   11.114300] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.114929] ata1.00: configured for UDMA/133
[   11.116215] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.119304] ata5: SATA link down (SStatus 0 SControl 300)
[   11.120284] ata6: SATA link down (SStatus 0 SControl 300)
[   11.122213] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.124381] ata4: SATA link down (SStatus 0 SControl 300)
[   11.125467] ata3.00: configured for UDMA/100
[   11.128199] ata2.00: configured for UDMA/133
[   11.133238] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.348753] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.565173] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.565377] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.738961] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   11.817116] PM: restore of devices complete after 1016.753 msecs
[   11.826711] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.826713] Restarting tasks ... done.
[   12.353470] PM: Basic memory bitmaps freed
[   14.244842] ata1.00: configured for UDMA/133
[   14.244846] ata1: EH complete
[   14.327789] ata2.00: configured for UDMA/133
[   14.327796] ata2: EH complete
[   14.921450] ata1.00: configured for UDMA/133
[   14.921454] ata1: EH complete
[   15.352496] ata2.00: configured for UDMA/133
[   15.352506] ata2: EH complete
[  104.005053] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  104.005060] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  104.005066] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  104.005074] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  104.005085] end_request: I/O error, dev sr0, sector 0
[  104.005090] Buffer I/O error on device sr0, logical block 0
[  104.007112] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  104.007117] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  104.007122] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  104.007129] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  104.007139] end_request: I/O error, dev sr0, sector 0
[  104.007143] Buffer I/O error on device sr0, logical block 0
[  104.009213] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  104.009219] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  104.009224] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  104.009231] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  104.009241] end_request: I/O error, dev sr0, sector 0
[  104.009245] Buffer I/O error on device sr0, logical block 0
[  391.541211] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[  518.072372] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  518.072380] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  518.072386] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  518.072394] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  518.072405] end_request: I/O error, dev sr0, sector 0
[  518.072410] Buffer I/O error on device sr0, logical block 0
[  518.074471] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  518.074477] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  518.074482] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  518.074489] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  518.074499] end_request: I/O error, dev sr0, sector 0
[  518.074503] Buffer I/O error on device sr0, logical block 0
[  518.076618] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  518.076624] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  518.076629] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  518.076635] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  518.076646] end_request: I/O error, dev sr0, sector 0
[  518.076649] Buffer I/O error on device sr0, logical block 0
[  577.691109] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[  598.462892] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  598.462897] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  598.462901] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  598.462906] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  598.462913] end_request: I/O error, dev sr0, sector 0
[  598.462916] Buffer I/O error on device sr0, logical block 0
[  598.465532] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  598.465537] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  598.465539] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  598.465544] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  598.465548] end_request: I/O error, dev sr0, sector 0
[  598.465551] Buffer I/O error on device sr0, logical block 0
[  598.467621] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  598.467624] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  598.467626] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  598.467629] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  598.467633] end_request: I/O error, dev sr0, sector 0
[  598.467635] Buffer I/O error on device sr0, logical block 0
[ 1472.416394] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[16118.156752] ata3.00: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x6
[16118.156758] ata3.00: irq_stat 0x40000001
[16118.156762] ata3: SError: { HostInt 10B8B }
[16118.156766] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[16118.156781] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[16118.156783]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error)
[16118.156787] ata3.00: status: { DRDY ERR }
[16118.156794] ata3: hard resetting link
[16118.460879] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[16118.464201] ata3.00: configured for UDMA/100
[16118.464953] ata3: EH complete
[16133.789534] usb 2-1.4: new high speed USB device using ehci_hcd and address 17
[16134.060161] usb 2-1.4: New USB device found, idVendor=0e21, idProduct=0750
[16134.060167] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16134.060171] usb 2-1.4: Product: iAUDIO 7
[16134.060174] usb 2-1.4: Manufacturer: COWON Systems, Inc.
[16134.060177] usb 2-1.4: SerialNumber: 05032511455603B2C40000402B55B7F8
[16134.060592] scsi20 : usb-storage 2-1.4:1.0
[16135.515329] scsi 20:0:0:0: Direct-Access     COWON    iAUDIO 7         0100 PQ: 0 ANSI: 0
[16135.515636] sd 20:0:0:0: Attached scsi generic sg5 type 0
[16135.517508] sd 20:0:0:0: [sde] 32309248 512-byte logical blocks: (16.5 GB/15.4 GiB)
[16135.523967] sd 20:0:0:0: [sde] Write Protect is off
[16135.523974] sd 20:0:0:0: [sde] Mode Sense: 37 00 00 08
[16135.523978] sd 20:0:0:0: [sde] Assuming drive cache: write through
[16135.526320] sd 20:0:0:0: [sde] Assuming drive cache: write through
[16135.526326]  sde:
[16135.528436] sd 20:0:0:0: [sde] Assuming drive cache: write through
[16135.528439] sd 20:0:0:0: [sde] Attached SCSI removable disk
[17176.529650] usb 2-1.4: USB disconnect, address 17
[18813.371103] ata1.00: configured for UDMA/133
[18813.371111] ata1: EH complete
[18813.716003] ata2: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x7
[18813.716013] ata2: SError: { HostInt 10B8B }
[18813.716022] ata2: hard resetting link
[18814.021018] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18814.033113] ata2.00: configured for UDMA/133
[18814.033122] ata2: EH complete
[18814.938511] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[18814.938515] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[18814.939202] PM: Basic memory bitmaps created
[18816.213642] Syncing filesystems ... done.
[18816.276011] Freezing user space processes ... (elapsed 0.01 seconds) done.
[18816.286941] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[18816.301004] PM: Preallocating image memory... done (allocated 555949 pages)
[18816.909455] PM: Allocated 2223796 kbytes in 0.60 seconds (3706.32 MB/s)
[18816.909457] Suspending console(s) (use no_console_suspend to debug)
[18816.910083] parport_pc 00:08: disabled
[18816.910347] serial 00:07: disabled
[18816.910615] serial 00:06: disabled
[18816.910734] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[18817.114054] HDA Intel 0000:00:1b.0: PCI INT A disabled
[18817.114078] ACPI handle has no context!
[18817.311569] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[18817.377519] PM: freeze of devices complete after 468.956 msecs
[18817.377758] PM: late freeze of devices complete after 0.236 msecs
[18817.378029] ACPI: Preparing to enter system sleep state S4
[18817.378856] PM: Saving platform NVS memory
[18817.382388] Disabling non-boot CPUs ...
[18817.392002] CPU 1 is now offline
[18817.403819] CPU 2 is now offline
[18817.419399] CPU 3 is now offline
[18817.419400] SMP alternatives: switching to UP code
[18817.423650] PM: Creating hibernation image:
[18817.471181] PM: Need to copy 416265 pages
[18817.471183] PM: Normal pages needed: 416265 + 1024, available pages: 580786
[   10.819451] PM: Restoring platform NVS memory
[   10.822897] Enabling non-boot CPUs ...
[   10.825692] SMP alternatives: switching to SMP code
[   10.829255] Booting Node 0 Processor 1 APIC 0x4
[   10.924742] CPU1 is up
[   10.924986] Booting Node 0 Processor 2 APIC 0x1
[   11.027735] CPU2 is up
[   11.028075] Booting Node 0 Processor 3 APIC 0x5
[   11.131615] CPU3 is up
[   11.132767] ACPI: Waking up from system sleep state S4
[   11.133307] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.133457] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.133532] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.133599] PM: early restore of devices complete after 0.432 msecs
[   11.222946] i915 0000:00:02.0: setting latency timer to 64
[   11.232733] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.232748] usb usb1: root hub lost power or was reset
[   11.236684] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.239679] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.239684] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.239711] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.239727] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.239734] usb usb2: root hub lost power or was reset
[   11.243663] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.243680] pci 0000:00:1e.0: setting latency timer to 64
[   11.243754] ahci 0000:00:1f.2: setting latency timer to 64
[   11.244709] sd 0:0:0:0: [sda] Starting disk
[   11.244808] sd 1:0:0:0: [sdb] Starting disk
[   11.247801] r8169 0000:01:00.0: eth0: link up
[   11.248623] serial 00:06: activated
[   11.250738] serial 00:07: activated
[   11.260637] parport_pc 00:08: activated
[   11.548047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.548787] ata1.00: configured for UDMA/133
[   11.554037] ata5: SATA link down (SStatus 0 SControl 300)
[   11.556027] ata6: SATA link down (SStatus 0 SControl 300)
[   11.558152] ata4: SATA link down (SStatus 0 SControl 300)
[   11.570060] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.785449] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.967109] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.970100] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.973353] ata3.00: configured for UDMA/100
[   11.979168] ata2.00: configured for UDMA/133
[   12.001887] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.002133] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.175752] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   12.263917] PM: restore of devices complete after 1043.444 msecs
[   12.273470] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.273472] Restarting tasks ... done.
[   12.575753] PM: Basic memory bitmaps freed
[   14.841412] ata1.00: configured for UDMA/133
[   14.841420] ata1: EH complete
[   15.199800] ata2.00: configured for UDMA/133
[   15.199807] ata2: EH complete
[   15.620494] ata1.00: configured for UDMA/133
[   15.620502] ata1: EH complete
[   15.695586] ata2.00: configured for UDMA/133
[   15.695594] ata2: EH complete
[ 1236.025000] ata1.00: configured for UDMA/133
[ 1236.025007] ata1: EH complete
[ 1236.373903] ata2.00: configured for UDMA/133
[ 1236.373911] ata2: EH complete
[ 1237.048802] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1237.048807] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 1237.049522] PM: Basic memory bitmaps created
[ 1238.294823] Syncing filesystems ... done.
[ 1238.356273] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1238.367118] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1238.381207] PM: Preallocating image memory... done (allocated 555949 pages)
[ 1238.641295] PM: Allocated 2223796 kbytes in 0.26 seconds (8553.06 MB/s)
[ 1238.641297] Suspending console(s) (use no_console_suspend to debug)
[ 1238.641900] parport_pc 00:08: disabled
[ 1238.642164] serial 00:07: disabled
[ 1238.642425] serial 00:06: disabled
[ 1238.642533] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1238.642582] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1238.744232] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1238.744256] ACPI handle has no context!
[ 1238.755164] PM: freeze of devices complete after 113.968 msecs
[ 1238.755394] PM: late freeze of devices complete after 0.228 msecs
[ 1238.755714] ACPI: Preparing to enter system sleep state S4
[ 1238.756560] PM: Saving platform NVS memory
[ 1238.760065] Disabling non-boot CPUs ...
[ 1238.773582] CPU 1 is now offline
[ 1238.793551] CPU 2 is now offline
[ 1238.809130] CPU 3 is now offline
[ 1238.809131] SMP alternatives: switching to UP code
[ 1238.813448] PM: Creating hibernation image:
[ 1238.857070] PM: Need to copy 431814 pages
[ 1238.857072] PM: Normal pages needed: 431814 + 1024, available pages: 565239
[   10.886126] PM: Restoring platform NVS memory
[   10.889573] Enabling non-boot CPUs ...
[   10.892304] SMP alternatives: switching to SMP code
[   10.895864] Booting Node 0 Processor 1 APIC 0x4
[   10.991351] CPU1 is up
[   10.991607] Booting Node 0 Processor 2 APIC 0x1
[   11.094334] CPU2 is up
[   11.094654] Booting Node 0 Processor 3 APIC 0x5
[   11.198210] CPU3 is up
[   11.199344] ACPI: Waking up from system sleep state S4
[   11.199883] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.200028] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.200102] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.200169] PM: early restore of devices complete after 0.425 msecs
[   11.290449] i915 0000:00:02.0: setting latency timer to 64
[   11.290458] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.290471] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.290473] usb usb1: root hub lost power or was reset
[   11.290475] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.294391] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.294414] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.294453] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.294460] usb usb2: root hub lost power or was reset
[   11.294463] pci 0000:00:1e.0: setting latency timer to 64
[   11.298375] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.298392] ahci 0000:00:1f.2: setting latency timer to 64
[   11.300389] serial 00:06: activated
[   11.301885] serial 00:07: activated
[   11.302498] r8169 0000:01:00.0: eth0: link up
[   11.303697] parport_pc 00:08: activated
[   11.315457] sd 0:0:0:0: [sda] Starting disk
[   11.336396] sd 1:0:0:0: [sdb] Starting disk
[   11.602686] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.603432] ata1.00: configured for UDMA/133
[   11.606680] ata5: SATA link down (SStatus 0 SControl 300)
[   11.608672] ata6: SATA link down (SStatus 0 SControl 300)
[   11.610634] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.612600] ata4: SATA link down (SStatus 0 SControl 300)
[   11.613888] ata3.00: configured for UDMA/100
[   11.621577] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.837283] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   12.021740] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   12.033827] ata2.00: configured for UDMA/133
[   12.053638] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.053858] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.227417] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   12.315383] PM: restore of devices complete after 1027.295 msecs
[   12.324902] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.324905] Restarting tasks ... done.
[   12.629033] PM: Basic memory bitmaps freed
[   14.376219] ata1.00: configured for UDMA/133
[   14.376227] ata1: EH complete
[   14.461632] ata2.00: configured for UDMA/133
[   14.461641] ata2: EH complete
[   14.834934] ata1.00: configured for UDMA/133
[   14.834939] ata1: EH complete
[   15.199430] ata2.00: configured for UDMA/133
[   15.199437] ata2: EH complete
[ 1534.572983] type=1505 audit(1293045876.459:275): operation="profile_load" pid=14870 name=/bin/ping
[ 1534.603151] type=1505 audit(1293045876.489:276): operation="profile_load" pid=14871 name=/sbin/klogd
[ 1534.661686] type=1505 audit(1293045876.547:277): operation="profile_load" pid=14872 name=/sbin/syslog-ng
[ 1534.720129] type=1505 audit(1293045876.606:278): operation="profile_load" pid=14873 name=/sbin/syslogd
[ 1534.783961] type=1505 audit(1293045876.670:279): operation="profile_load" pid=14874 name=/usr/sbin/avahi-daemon
[ 1534.838435] type=1505 audit(1293045876.725:280): operation="profile_load" pid=14875 name=/usr/sbin/identd
[ 1534.896614] type=1505 audit(1293045876.783:281): operation="profile_load" pid=14876 name=/usr/sbin/mdnsd
[ 1534.964864] type=1505 audit(1293045876.851:282): operation="profile_load" pid=14877 name=/usr/sbin/nscd
[ 1535.062150] type=1505 audit(1293045876.949:283): operation="profile_load" pid=14878 name=/usr/sbin/ntpd
[ 1535.114368] type=1505 audit(1293045877.001:284): operation="profile_load" pid=14879 name=/usr/sbin/traceroute
[18144.297266] ata1.00: configured for UDMA/133
[18144.297270] ata1: EH complete
[18144.671693] ata2.00: configured for UDMA/133
[18144.671701] ata2: EH complete
[18145.817150] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[18145.817154] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[18145.817904] PM: Basic memory bitmaps created
[18147.131747] Syncing filesystems ... done.
[18147.233044] Freezing user space processes ... (elapsed 0.01 seconds) done.
[18147.243972] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[18147.258088] PM: Preallocating image memory... done (allocated 555949 pages)
[18148.309381] PM: Allocated 2223796 kbytes in 1.05 seconds (2117.90 MB/s)
[18148.309383] Suspending console(s) (use no_console_suspend to debug)
[18148.309714] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[18148.311183] parport_pc 00:08: disabled
[18148.311446] serial 00:07: disabled
[18148.311720] serial 00:06: disabled
[18148.412343] HDA Intel 0000:00:1b.0: PCI INT A disabled
[18148.412367] ACPI handle has no context!
[18148.510044] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[18148.597912] PM: freeze of devices complete after 289.031 msecs
[18148.598144] PM: late freeze of devices complete after 0.229 msecs
[18148.598427] ACPI: Preparing to enter system sleep state S4
[18148.599280] PM: Saving platform NVS memory
[18148.602828] Disabling non-boot CPUs ...
[18148.620132] CPU 1 is now offline
[18148.635986] CPU 2 is now offline
[18148.651813] CPU 3 is now offline
[18148.651815] SMP alternatives: switching to UP code
[18148.656009] PM: Creating hibernation image:
[18148.701688] PM: Need to copy 432389 pages
[18148.701690] PM: Normal pages needed: 432389 + 1024, available pages: 564664
[   10.324427] PM: Restoring platform NVS memory
[   10.327872] Enabling non-boot CPUs ...
[   10.330726] SMP alternatives: switching to SMP code
[   10.334291] Booting Node 0 Processor 1 APIC 0x4
[   10.429764] CPU1 is up
[   10.430018] Booting Node 0 Processor 2 APIC 0x1
[   10.532755] CPU2 is up
[   10.533083] Booting Node 0 Processor 3 APIC 0x5
[   10.636631] CPU3 is up
[   10.637772] ACPI: Waking up from system sleep state S4
[   10.638307] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.638453] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.638527] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.638595] PM: early restore of devices complete after 0.426 msecs
[   10.725364] i915 0000:00:02.0: setting latency timer to 64
[   10.725376] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.725389] usb usb1: root hub lost power or was reset
[   10.729325] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.729356] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.729360] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.729366] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.729373] usb usb2: root hub lost power or was reset
[   10.733279] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.733291] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.733296] pci 0000:00:1e.0: setting latency timer to 64
[   10.733308] ahci 0000:00:1f.2: setting latency timer to 64
[   10.735283] serial 00:06: activated
[   10.736741] r8169 0000:01:00.0: eth0: link up
[   10.736810] serial 00:07: activated
[   10.738591] parport_pc 00:08: activated
[   10.752893] sd 0:0:0:0: [sda] Starting disk
[   10.773821] sd 1:0:0:0: [sdb] Starting disk
[   11.037122] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.037842] ata1.00: configured for UDMA/133
[   11.039066] ata6: SATA link down (SStatus 0 SControl 300)
[   11.041046] ata5: SATA link down (SStatus 0 SControl 300)
[   11.043142] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.046041] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.047233] ata4: SATA link down (SStatus 0 SControl 300)
[   11.051551] ata3.00: configured for UDMA/100
[   11.055726] ata2.00: configured for UDMA/133
[   11.056014] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.271608] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.272658] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.272918] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.458288] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   11.546271] PM: restore of devices complete after 822.809 msecs
[   11.556070] snapshot_deprecated_ioctl: 30 callbacks suppressed
[   11.556074] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.556076] Restarting tasks ... done.
[   11.855833] PM: Basic memory bitmaps freed
[   13.860487] ata1.00: configured for UDMA/133
[   13.860492] ata1: EH complete
[   13.979470] ata2.00: configured for UDMA/133
[   13.979478] ata2: EH complete
[   14.644201] ata1.00: configured for UDMA/133
[   14.644206] ata1: EH complete
[   15.036894] ata2.00: configured for UDMA/133
[   15.036901] ata2: EH complete
[ 1115.438283] ata1.00: configured for UDMA/133
[ 1115.438288] ata1: EH complete
[ 1115.821856] ata2.00: configured for UDMA/133
[ 1115.821864] ata2: EH complete
[ 1116.802999] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1116.803003] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 1116.803670] PM: Basic memory bitmaps created
[ 1118.058677] Syncing filesystems ... done.
[ 1118.117150] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1118.128176] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1118.142289] PM: Preallocating image memory... done (allocated 555949 pages)
[ 1118.425626] PM: Allocated 2223796 kbytes in 0.28 seconds (7942.12 MB/s)
[ 1118.425628] Suspending console(s) (use no_console_suspend to debug)
[ 1118.425932] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1118.425947] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1118.427417] parport_pc 00:08: disabled
[ 1118.427689] serial 00:07: disabled
[ 1118.427950] serial 00:06: disabled
[ 1118.529273] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1118.529298] ACPI handle has no context!
[ 1118.540172] PM: freeze of devices complete after 114.659 msecs
[ 1118.540394] PM: late freeze of devices complete after 0.219 msecs
[ 1118.540713] ACPI: Preparing to enter system sleep state S4
[ 1118.541556] PM: Saving platform NVS memory
[ 1118.545078] Disabling non-boot CPUs ...
[ 1118.558464] CPU 1 is now offline
[ 1118.574451] CPU 2 is now offline
[ 1118.590157] CPU 3 is now offline
[ 1118.590159] SMP alternatives: switching to UP code
[ 1118.594459] PM: Creating hibernation image:
[ 1118.638394] PM: Need to copy 431173 pages
[ 1118.638396] PM: Normal pages needed: 431173 + 1024, available pages: 565880
[   11.045009] PM: Restoring platform NVS memory
[   11.048454] Enabling non-boot CPUs ...
[   11.051192] SMP alternatives: switching to SMP code
[   11.054755] Booting Node 0 Processor 1 APIC 0x4
[   11.150235] CPU1 is up
[   11.150493] Booting Node 0 Processor 2 APIC 0x1
[   11.253221] CPU2 is up
[   11.253549] Booting Node 0 Processor 3 APIC 0x5
[   11.357103] CPU3 is up
[   11.358239] ACPI: Waking up from system sleep state S4
[   11.358713] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[   11.358779] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.358925] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.358999] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.359067] PM: early restore of devices complete after 0.429 msecs
[   11.446358] i915 0000:00:02.0: setting latency timer to 64
[   11.446362] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.446369] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.446373] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.446377] usb usb1: root hub lost power or was reset
[   11.450300] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.450318] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.450353] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.450361] usb usb2: root hub lost power or was reset
[   11.454285] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.454287] pci 0000:00:1e.0: setting latency timer to 64
[   11.454315] ahci 0000:00:1f.2: setting latency timer to 64
[   11.455959] serial 00:06: activated
[   11.457261] serial 00:07: activated
[   11.458208] r8169 0000:01:00.0: eth0: link up
[   11.458833] parport_pc 00:08: activated
[   11.513615] sd 0:0:0:0: [sda] Starting disk
[   11.513657] sd 1:0:0:0: [sdb] Starting disk
[   11.758588] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.760579] ata6: SATA link down (SStatus 0 SControl 300)
[   11.761917] ata3.00: configured for UDMA/100
[   11.762586] ata5: SATA link down (SStatus 0 SControl 300)
[   11.764610] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.766582] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.767315] ata1.00: configured for UDMA/133
[   11.768500] ata4: SATA link down (SStatus 0 SControl 300)
[   11.777483] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.797126] ata2.00: configured for UDMA/133
[   11.993133] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   12.209544] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.209785] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.383324] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   12.471250] PM: restore of devices complete after 1027.236 msecs
[   12.480827] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.480829] Restarting tasks ... done.
[   12.781597] PM: Basic memory bitmaps freed
[   14.654047] ata1.00: configured for UDMA/133
[   14.654054] ata1: EH complete
[   15.042725] ata2.00: configured for UDMA/133
[   15.042730] ata2: EH complete
[   15.466945] ata1.00: configured for UDMA/133
[   15.466950] ata1: EH complete
[   15.857799] ata2.00: configured for UDMA/133
[   15.857805] ata2: EH complete
[ 3850.658759] r8169 0000:01:00.0: eth0: link down
[ 3853.123354] r8169 0000:01:00.0: eth0: link up
[26038.580906] ata1.00: configured for UDMA/133
[26038.580910] ata1: EH complete
[26038.933457] ata2.00: configured for UDMA/133
[26038.933466] ata2: EH complete
[26039.730033] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[26039.730037] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[26039.730750] PM: Basic memory bitmaps created
[26041.018947] Syncing filesystems ... done.
[26041.081203] Freezing user space processes ... (elapsed 0.01 seconds) done.
[26041.092172] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[26041.106314] PM: Preallocating image memory... done (allocated 555918 pages)
[26041.803273] PM: Allocated 2223672 kbytes in 0.69 seconds (3222.71 MB/s)
[26041.803275] Suspending console(s) (use no_console_suspend to debug)
[26041.803602] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[26041.804007] parport_pc 00:08: disabled
[26041.804292] serial 00:07: disabled
[26041.804710] serial 00:06: disabled
[26042.004057] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[26042.006084] HDA Intel 0000:00:1b.0: PCI INT A disabled
[26042.006108] ACPI handle has no context!
[26042.069993] PM: freeze of devices complete after 267.164 msecs
[26042.070226] PM: late freeze of devices complete after 0.231 msecs
[26042.070504] ACPI: Preparing to enter system sleep state S4
[26042.071351] PM: Saving platform NVS memory
[26042.074882] Disabling non-boot CPUs ...
[26042.092169] CPU 1 is now offline
[26042.108155] CPU 2 is now offline
[26042.123851] CPU 3 is now offline
[26042.123853] SMP alternatives: switching to UP code
[26042.128136] PM: Creating hibernation image:
[26042.173958] PM: Need to copy 432033 pages
[26042.173960] PM: Normal pages needed: 432033 + 1024, available pages: 565018
[   10.741274] PM: Restoring platform NVS memory
[   10.744719] Enabling non-boot CPUs ...
[   10.747482] SMP alternatives: switching to SMP code
[   10.751038] Booting Node 0 Processor 1 APIC 0x4
[   10.846519] CPU1 is up
[   10.846764] Booting Node 0 Processor 2 APIC 0x1
[   10.949507] CPU2 is up
[   10.949819] Booting Node 0 Processor 3 APIC 0x5
[   11.053384] CPU3 is up
[   11.054522] ACPI: Waking up from system sleep state S4
[   11.054994] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   11.055059] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.055205] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.055279] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.055346] PM: early restore of devices complete after 0.429 msecs
[   11.143559] i915 0000:00:02.0: setting latency timer to 64
[   11.143607] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.143628] usb usb1: root hub lost power or was reset
[   11.143631] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.147555] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.147578] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.147585] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.147595] usb usb2: root hub lost power or was reset
[   11.151513] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.151525] pci 0000:00:1e.0: setting latency timer to 64
[   11.151568] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.151587] ahci 0000:00:1f.2: setting latency timer to 64
[   11.152233] sd 0:0:0:0: [sda] Starting disk
[   11.152311] sd 1:0:0:0: [sdb] Starting disk
[   11.154790] serial 00:06: activated
[   11.155547] r8169 0000:01:00.0: eth0: link up
[   11.156755] serial 00:07: activated
[   11.159084] parport_pc 00:08: activated
[   11.455864] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.458854] ata6: SATA link down (SStatus 0 SControl 300)
[   11.459854] ata5: SATA link down (SStatus 0 SControl 300)
[   11.461866] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.462385] ata1.00: configured for UDMA/133
[   11.464790] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.465778] ata4: SATA link down (SStatus 0 SControl 300)
[   11.467991] ata2.00: configured for UDMA/133
[   11.468010] ata3.00: configured for UDMA/100
[   11.474788] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.690338] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.691323] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.691506] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.877194] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   11.965998] PM: restore of devices complete after 824.396 msecs
[   11.975754] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.975757] Restarting tasks ... done.
[   12.273180] PM: Basic memory bitmaps freed
[   14.471200] ata1.00: configured for UDMA/133
[   14.471205] ata1: EH complete
[   14.826890] ata2.00: configured for UDMA/133
[   14.826897] ata2: EH complete
[   15.148108] ata1.00: configured for UDMA/133
[   15.148115] ata1: EH complete
[   15.223290] ata2.00: configured for UDMA/133
[   15.223297] ata2: EH complete
[  565.734577] npviewer.bin[22818]: segfault at 418 ip 00000000f5ef7b66 sp 00000000ffd138d8 error 6 in libflashplayer.so[f5ca9000+b2c000]
[  662.796555] npviewer.bin[19108]: segfault at f58cb04c ip 00000000f60bfdc7 sp 00000000fff77fc0 error 4 in libflashplayer.so[f5d21000+b2c000]
[16790.047485] npviewer.bin[19158]: segfault at f59e9054 ip 00000000f6139da3 sp 00000000ffafc2e0 error 4 in libflashplayer.so[f5d9b000+b2c000]
[17687.899447] npviewer.bin[4901]: segfault at f576e04c ip 00000000f6090dc7 sp 00000000ffb0ae40 error 4 in libflashplayer.so[f5cf2000+b2c000]
[27419.308102] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[27419.308112] ata1.00: failed command: SMART
[27419.308124] ata1.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[27419.308127]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[27419.308133] ata1.00: status: { DRDY }
[27419.308140] ata1: hard resetting link
[27419.612421] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[27419.613088] ata1.00: configured for UDMA/133
[27419.613113] ata1: EH complete
[27440.261033] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[27440.261041] ata1.00: failed command: SMART
[27440.261050] ata1.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[27440.261052]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[27440.261056] ata1.00: status: { DRDY }
[27440.261063] ata1: hard resetting link
[27440.565345] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[27440.565902] ata1.00: configured for UDMA/133
[27440.565930] ata1: EH complete
[29588.331152] r8169 0000:01:00.0: eth0: link down
[29590.694777] r8169 0000:01:00.0: eth0: link up
[37792.797859] ata1.00: configured for UDMA/133
[37792.797863] ata1: EH complete
[37793.153956] ata2.00: configured for UDMA/133
[37793.153964] ata2: EH complete
[37793.983521] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[37793.983525] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[37793.984333] PM: Basic memory bitmaps created
[37795.242862] Syncing filesystems ... done.
[37795.306272] Freezing user space processes ... (elapsed 0.01 seconds) done.
[37795.317109] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[37795.331240] PM: Preallocating image memory... done (allocated 555949 pages)
[37796.100638] PM: Allocated 2223796 kbytes in 0.77 seconds (2888.04 MB/s)
[37796.100639] Suspending console(s) (use no_console_suspend to debug)
[37796.100901] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[37796.101393] parport_pc 00:08: disabled
[37796.101659] serial 00:07: disabled
[37796.101922] serial 00:06: disabled
[37796.300847] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[37796.303868] HDA Intel 0000:00:1b.0: PCI INT A disabled
[37796.303893] ACPI handle has no context!
[37796.366785] PM: freeze of devices complete after 266.591 msecs
[37796.367025] PM: late freeze of devices complete after 0.237 msecs
[37796.367299] ACPI: Preparing to enter system sleep state S4
[37796.368147] PM: Saving platform NVS memory
[37796.371680] Disabling non-boot CPUs ...
[37796.389950] CPU 1 is now offline
[37796.407948] CPU 2 is now offline
[37796.427627] CPU 3 is now offline
[37796.427628] SMP alternatives: switching to UP code
[37796.431885] PM: Creating hibernation image:
[37796.477937] PM: Need to copy 422391 pages
[37796.477939] PM: Normal pages needed: 422391 + 1024, available pages: 574662
[   10.782151] PM: Restoring platform NVS memory
[   10.785598] Enabling non-boot CPUs ...
[   10.788382] SMP alternatives: switching to SMP code
[   10.791943] Booting Node 0 Processor 1 APIC 0x4
[   10.887421] CPU1 is up
[   10.887666] Booting Node 0 Processor 2 APIC 0x1
[   10.990425] CPU2 is up
[   10.990756] Booting Node 0 Processor 3 APIC 0x5
[   11.094304] CPU3 is up
[   11.095453] ACPI: Waking up from system sleep state S4
[   11.095929] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[   11.095996] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.096145] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.096220] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.096287] PM: early restore of devices complete after 0.436 msecs
[   11.184044] i915 0000:00:02.0: setting latency timer to 64
[   11.184054] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.184062] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.184066] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.184068] usb usb1: root hub lost power or was reset
[   11.187999] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.188023] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.188060] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.188068] usb usb2: root hub lost power or was reset
[   11.188070] pci 0000:00:1e.0: setting latency timer to 64
[   11.191984] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.192001] ahci 0000:00:1f.2: setting latency timer to 64
[   11.194063] serial 00:06: activated
[   11.195464] r8169 0000:01:00.0: eth0: link up
[   11.195589] serial 00:07: activated
[   11.197470] parport_pc 00:08: activated
[   11.206872] sd 0:0:0:0: [sda] Starting disk
[   11.223554] sd 1:0:0:0: [sdb] Starting disk
[   11.495771] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.497735] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.499726] ata5: SATA link down (SStatus 0 SControl 300)
[   11.501097] ata3.00: configured for UDMA/100
[   11.501700] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.502265] ata1.00: configured for UDMA/133
[   11.503689] ata4: SATA link down (SStatus 0 SControl 300)
[   11.505741] ata6: SATA link down (SStatus 0 SControl 300)
[   11.507820] ata2.00: configured for UDMA/133
[   11.514754] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.730249] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.946767] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.947014] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.120494] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   12.208493] PM: restore of devices complete after 1026.799 msecs
[   12.218054] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.218056] Restarting tasks ... done.
[   12.529921] PM: Basic memory bitmaps freed
[   14.528408] ata1.00: configured for UDMA/133
[   14.528415] ata1: EH complete
[   14.885901] ata2.00: configured for UDMA/133
[   14.885908] ata2: EH complete
[   15.404021] ata1.00: configured for UDMA/133
[   15.404025] ata1: EH complete
[   15.756355] ata2.00: configured for UDMA/133
[   15.756363] ata2: EH complete
[ 1519.657203] ata1.00: configured for UDMA/133
[ 1519.657210] ata1: EH complete
[ 1520.008877] ata2.00: configured for UDMA/133
[ 1520.008886] ata2: EH complete
[ 1521.182611] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1521.182615] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 1521.183637] PM: Basic memory bitmaps created
[ 1522.433849] Syncing filesystems ... done.
[ 1522.497385] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1522.508159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1522.522213] PM: Preallocating image memory... done (allocated 555949 pages)
[ 1522.797288] PM: Allocated 2223796 kbytes in 0.27 seconds (8236.28 MB/s)
[ 1522.797289] Suspending console(s) (use no_console_suspend to debug)
[ 1522.797892] parport_pc 00:08: disabled
[ 1522.798156] serial 00:07: disabled
[ 1522.798417] serial 00:06: disabled
[ 1522.798527] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1522.798581] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1522.899288] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 1522.899312] ACPI handle has no context!
[ 1522.910196] PM: freeze of devices complete after 113.018 msecs
[ 1522.910423] PM: late freeze of devices complete after 0.224 msecs
[ 1522.910737] ACPI: Preparing to enter system sleep state S4
[ 1522.911576] PM: Saving platform NVS memory
[ 1522.915095] Disabling non-boot CPUs ...
[ 1522.928623] CPU 1 is now offline
[ 1522.948589] CPU 2 is now offline
[ 1522.964164] CPU 3 is now offline
[ 1522.964166] SMP alternatives: switching to UP code
[ 1522.968492] PM: Creating hibernation image:
[ 1523.011578] PM: Need to copy 431562 pages
[ 1523.011580] PM: Normal pages needed: 431562 + 1024, available pages: 565491
[   12.419112] PM: Restoring platform NVS memory
[   12.422558] Enabling non-boot CPUs ...
[   12.425279] SMP alternatives: switching to SMP code
[   12.428841] Booting Node 0 Processor 1 APIC 0x4
[   12.524325] CPU1 is up
[   12.524578] Booting Node 0 Processor 2 APIC 0x1
[   12.627316] CPU2 is up
[   12.627639] Booting Node 0 Processor 3 APIC 0x5
[   12.731198] CPU3 is up
[   12.732348] ACPI: Waking up from system sleep state S4
[   12.732824] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   12.732890] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   12.733035] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   12.733109] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   12.733177] PM: early restore of devices complete after 0.429 msecs
[   12.817009] i915 0000:00:02.0: setting latency timer to 64
[   12.817016] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   12.817025] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   12.817029] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   12.817031] usb usb1: root hub lost power or was reset
[   12.820967] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   12.820985] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   12.821021] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   12.821030] pci 0000:00:1e.0: setting latency timer to 64
[   12.821039] usb usb2: root hub lost power or was reset
[   12.821041] ahci 0000:00:1f.2: setting latency timer to 64
[   12.824947] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   12.826768] serial 00:06: activated
[   12.828054] serial 00:07: activated
[   12.828428] r8169 0000:01:00.0: eth0: link up
[   12.829637] parport_pc 00:08: activated
[   12.839780] sd 0:0:0:0: [sda] Starting disk
[   12.860391] sd 1:0:0:0: [sdb] Starting disk
[   13.128677] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   13.129364] ata1.00: configured for UDMA/133
[   13.131608] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   13.132704] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   13.134662] ata5: SATA link down (SStatus 0 SControl 300)
[   13.135938] ata3.00: configured for UDMA/100
[   13.136601] ata4: SATA link down (SStatus 0 SControl 300)
[   13.138591] ata6: SATA link down (SStatus 0 SControl 300)
[   13.143684] ata2.00: configured for UDMA/133
[   13.147653] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   13.363172] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   13.579580] hub 2-1:1.0: hub_port_status failed (err = -32)
[   13.579856] hub 2-1:1.0: hub_port_status failed (err = -32)
[   13.753507] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   13.842542] PM: restore of devices complete after 1027.895 msecs
[   13.852105] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   13.852108] Restarting tasks ... done.
[   14.157552] PM: Basic memory bitmaps freed
[   16.074906] ata1.00: configured for UDMA/133
[   16.074912] ata1: EH complete
[   16.151589] ata2.00: configured for UDMA/133
[   16.151597] ata2: EH complete
[   16.417289] ata1.00: configured for UDMA/133
[   16.417297] ata1: EH complete
[   16.503895] ata2.00: configured for UDMA/133
[   16.503901] ata2: EH complete
[ 5106.794795] r8169 0000:01:00.0: eth0: link down
[ 5109.080276] r8169 0000:01:00.0: eth0: link up
[ 7546.049422] ata1.00: configured for UDMA/133
[ 7546.049430] ata1: EH complete
[ 7546.411374] ata2.00: configured for UDMA/133
[ 7546.411382] ata2: EH complete
[ 7547.432134] PM: Syncing filesystems ... done.
[ 7547.555318] PM: Preparing system for mem sleep
[ 7547.555557] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 7547.567120] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 7547.578090] PM: Entering mem sleep
[ 7547.578111] Suspending console(s) (use no_console_suspend to debug)
[ 7547.578431] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 7547.578599] sd 1:0:0:0: [sdb] Stopping disk
[ 7547.578621] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7547.578700] sd 0:0:0:0: [sda] Stopping disk
[ 7547.589649] parport_pc 00:08: disabled
[ 7547.589916] serial 00:07: disabled
[ 7547.590185] serial 00:06: disabled
[ 7547.791588] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 7547.791613] ACPI handle has no context!
[ 7549.038728] PM: suspend of devices complete after 1463.713 msecs
[ 7549.038806] r8169 0000:01:00.0: PME# enabled
[ 7549.038814] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[ 7549.071687] PM: late suspend of devices complete after 33.029 msecs
[ 7549.071854] ACPI: Preparing to enter system sleep state S3
[ 7549.072839] Disabling non-boot CPUs ...
[ 7549.086109] CPU 1 is now offline
[ 7549.102067] CPU 2 is now offline
[ 7549.117638] CPU 3 is now offline
[ 7549.117640] SMP alternatives: switching to UP code
[18446744052.620878] Back to C!
[18446744052.621157] Enabling non-boot CPUs ...
[18446744052.623963] SMP alternatives: switching to SMP code
[18446744052.627751] Booting Node 0 Processor 1 APIC 0x4
[18446744052.723044] CPU1 is up
[18446744052.723343] Booting Node 0 Processor 2 APIC 0x1
[18446744052.826012] CPU2 is up
[18446744052.826354] Booting Node 0 Processor 3 APIC 0x5
[18446744052.929887] CPU3 is up
[18446744052.930894] ACPI: Waking up from system sleep state S3
[18446744052.931527] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[18446744052.931546] pci 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[18446744052.931560] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[18446744052.931620] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[18446744052.931624] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[18446744052.931645] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x20105)
[18446744052.931657] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[18446744052.931661] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[18446744052.931717] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff)
[18446744052.931783] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[18446744052.931838] r8169 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[18446744052.931846] r8169 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfbee0000)
[18446744052.931854] r8169 0000:01:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfaff800c)
[18446744052.931860] r8169 0000:01:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfafff00c)
[18446744052.931867] r8169 0000:01:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xd801)
[18446744052.931871] r8169 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[18446744052.931877] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[18446744052.931945] PM: early resume of devices complete after 0.455 msecs
[18446744052.931998] i915 0000:00:02.0: setting latency timer to 64
[18446744052.932008] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[18446744052.932031] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[18446744052.932035] HDA Intel 0000:00:1b.0: setting latency timer to 64
[18446744052.932060] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[18446744052.932096] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[18446744052.932113] pci 0000:00:1e.0: setting latency timer to 64
[18446744052.932128] ahci 0000:00:1f.2: setting latency timer to 64
[18446744052.933948] serial 00:06: activated
[18446744052.935277] serial 00:07: activated
[18446744052.936816] parport_pc 00:08: activated
[18446744052.937212] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[18446744052.937216] r8169 0000:01:00.0: PME# disabled
[18446744052.941220] r8169 0000:01:00.0: eth0: link up
[18446744052.966149] sd 0:0:0:0: [sda] Starting disk
[18446744052.977528] sd 1:0:0:0: [sdb] Starting disk
[18446744053.004033] hub 2-1:1.0: hub_port_status failed (err = -32)
[18446744053.004264] hub 2-1:1.0: hub_port_status failed (err = -32)
[18446744053.250623] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18446744053.251326] ata1.00: configured for UDMA/133
[18446744053.254429] ata4: SATA link down (SStatus 0 SControl 300)
[18446744053.258498] ata5: SATA link down (SStatus 0 SControl 300)
[18446744053.260419] ata6: SATA link down (SStatus 0 SControl 300)
[18446744053.669558] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[18446744053.670854] ata3.00: configured for UDMA/100
[18446744058.295140] ata2: link is slow to respond, please be patient (ready=0)
[18446744062.976593] ata2: COMRESET failed (errno=-16)
[18446744063.738881] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18446744063.751111] ata2.00: configured for UDMA/133
[18446744063.772393] PM: resume of devices complete after 10864.844 msecs
[18446744063.772617] PM: Finishing wakeup.
[18446744063.772618] Restarting tasks ... done.
[18446744065.841648] ata1.00: configured for UDMA/133
[18446744065.841652] ata1: EH complete
[18446744065.946661] ata2.00: configured for UDMA/133
[18446744065.946667] ata2: EH complete
[18446744066.268330] ata1.00: configured for UDMA/133
[18446744066.268334] ata1: EH complete
[18446744066.352800] ata2.00: configured for UDMA/133
[18446744066.352806] ata2: EH complete
[   94.090401] r8169 0000:01:00.0: eth0: link down
[   97.165437] r8169 0000:01:00.0: eth0: link up
[31975.541760] npviewer.bin[13381]: segfault at 418 ip 00000000f5f7fb66 sp 00000000ff981048 error 6 in libflashplayer.so[f5d31000+b2c000]
[37766.950185] ata1.00: configured for UDMA/133
[37766.950189] ata1: EH complete
[37767.333876] ata2.00: configured for UDMA/133
[37767.333884] ata2: EH complete
[37768.082410] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[37768.082414] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[37768.083147] PM: Basic memory bitmaps created
[37769.368172] Syncing filesystems ... done.
[37769.408858] Freezing user space processes ... (elapsed 0.01 seconds) done.
[37769.419764] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[37769.433555] PM: Preallocating image memory... done (allocated 555949 pages)
[37770.317615] PM: Allocated 2223796 kbytes in 0.88 seconds (2527.04 MB/s)
[37770.317617] Suspending console(s) (use no_console_suspend to debug)
[37770.318241] parport_pc 00:08: disabled
[37770.318506] serial 00:07: disabled
[37770.318770] serial 00:06: disabled
[37770.318892] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[37770.519254] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[37770.521280] HDA Intel 0000:00:1b.0: PCI INT A disabled
[37770.521304] ACPI handle has no context!
[37770.596167] PM: freeze of devices complete after 279.020 msecs
[37770.596393] PM: late freeze of devices complete after 0.224 msecs
[37770.596680] ACPI: Preparing to enter system sleep state S4
[37770.597522] PM: Saving platform NVS memory
[37770.601053] Disabling non-boot CPUs ...
[37770.614487] CPU 1 is now offline
[37770.631347] CPU 2 is now offline
[37770.647039] CPU 3 is now offline
[37770.647040] SMP alternatives: switching to UP code
[37770.651282] PM: Creating hibernation image:
[37770.694416] PM: Need to copy 432447 pages
[37770.694418] PM: Normal pages needed: 432447 + 1024, available pages: 564606
[   10.750454] PM: Restoring platform NVS memory
[   10.753899] Enabling non-boot CPUs ...
[   10.756706] SMP alternatives: switching to SMP code
[   10.760268] Booting Node 0 Processor 1 APIC 0x4
[   10.855749] CPU1 is up
[   10.855993] Booting Node 0 Processor 2 APIC 0x1
[   10.958740] CPU2 is up
[   10.959067] Booting Node 0 Processor 3 APIC 0x5
[   11.062617] CPU3 is up
[   11.063770] ACPI: Waking up from system sleep state S4
[   11.064242] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   11.064308] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.064453] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.064527] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.064594] PM: early restore of devices complete after 0.428 msecs
[   11.148558] i915 0000:00:02.0: setting latency timer to 64
[   11.157769] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.157784] usb usb1: root hub lost power or was reset
[   11.161690] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.161694] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.161722] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.161758] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.164738] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.164747] usb usb2: root hub lost power or was reset
[   11.168676] pci 0000:00:1e.0: setting latency timer to 64
[   11.168690] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.168754] ahci 0000:00:1f.2: setting latency timer to 64
[   11.169847] sd 0:0:0:0: [sda] Starting disk
[   11.170772] sd 1:0:0:0: [sdb] Starting disk
[   11.172828] r8169 0000:01:00.0: eth0: link up
[   11.173458] serial 00:06: activated
[   11.182953] serial 00:07: activated
[   11.185260] parport_pc 00:08: activated
[   11.473095] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.475070] ata6: SATA link down (SStatus 0 SControl 300)
[   11.479054] ata5: SATA link down (SStatus 0 SControl 300)
[   11.480999] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.481551] ata1.00: configured for UDMA/133
[   11.482000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.482988] ata4: SATA link down (SStatus 0 SControl 300)
[   11.485297] ata3.00: configured for UDMA/100
[   11.492053] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.505595] ata2.00: configured for UDMA/133
[   11.707563] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.708600] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.708843] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.894372] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   11.983175] PM: restore of devices complete after 836.628 msecs
[   11.992838] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.992840] Restarting tasks ... done.
[   12.294271] PM: Basic memory bitmaps freed
[   14.249926] ata1.00: configured for UDMA/133
[   14.249931] ata1: EH complete
[   14.627602] ata2.00: configured for UDMA/133
[   14.627608] ata2: EH complete
[   15.237757] ata1.00: configured for UDMA/133
[   15.237762] ata1: EH complete
[   15.343866] ata2.00: configured for UDMA/133
[   15.343874] ata2: EH complete
[25765.881594] r8169 0000:01:00.0: eth0: link down
[25768.171132] r8169 0000:01:00.0: eth0: link up
[35188.652916] npviewer.bin[18894]: segfault at 0 ip 00000000f5f5cc2c sp 00000000ffc0f400 error 4 in libflashplayer.so[f5cc7000+b2c000]
[41972.717171] npviewer.bin[14872]: segfault at 418 ip 00000000f5fb1b66 sp 00000000ffca3fe8 error 6 in libflashplayer.so[f5d63000+b2c000]
[44865.721445] ata1.00: configured for UDMA/133
[44865.721449] ata1: EH complete
[44866.081582] ata2.00: configured for UDMA/133
[44866.081591] ata2: EH complete
[44866.835537] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[44866.835540] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[44866.836195] PM: Basic memory bitmaps created
[44868.104823] Syncing filesystems ... done.
[44868.182247] Freezing user space processes ... (elapsed 0.01 seconds) done.
[44868.193193] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[44868.207276] PM: Preallocating image memory... done (allocated 555949 pages)
[44868.715273] PM: Allocated 2223796 kbytes in 0.50 seconds (4447.59 MB/s)
[44868.715275] Suspending console(s) (use no_console_suspend to debug)
[44868.715546] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[44868.716307] parport_pc 00:08: disabled
[44868.716611] serial 00:07: disabled
[44868.716874] serial 00:06: disabled
[44868.915526] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[44868.918594] HDA Intel 0000:00:1b.0: PCI INT A disabled
[44868.918619] ACPI handle has no context!
[44868.981501] PM: freeze of devices complete after 266.671 msecs
[44868.981732] PM: late freeze of devices complete after 0.229 msecs
[44868.981995] ACPI: Preparing to enter system sleep state S4
[44868.982853] PM: Saving platform NVS memory
[44868.986398] Disabling non-boot CPUs ...
[44869.003677] CPU 1 is now offline
[44869.019531] CPU 2 is now offline
[44869.035352] CPU 3 is now offline
[44869.035354] SMP alternatives: switching to UP code
[44869.039634] PM: Creating hibernation image:
[44869.084237] PM: Need to copy 428930 pages
[44869.084239] PM: Normal pages needed: 428930 + 1024, available pages: 568123
[   11.067882] PM: Restoring platform NVS memory
[   11.071327] Enabling non-boot CPUs ...
[   11.074098] SMP alternatives: switching to SMP code
[   11.077661] Booting Node 0 Processor 1 APIC 0x4
[   11.173134] CPU1 is up
[   11.173381] Booting Node 0 Processor 2 APIC 0x1
[   11.276133] CPU2 is up
[   11.276465] Booting Node 0 Processor 3 APIC 0x5
[   11.380013] CPU3 is up
[   11.381144] ACPI: Waking up from system sleep state S4
[   11.381627] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[   11.381693] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.381840] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.381914] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.381981] PM: early restore of devices complete after 0.431 msecs
[   11.466731] i915 0000:00:02.0: setting latency timer to 64
[   11.466747] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.466757] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.466761] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.466762] usb usb1: root hub lost power or was reset
[   11.470681] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.470705] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.470748] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.470763] pci 0000:00:1e.0: setting latency timer to 64
[   11.470771] ahci 0000:00:1f.2: setting latency timer to 64
[   11.470776] usb usb2: root hub lost power or was reset
[   11.474695] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.476742] serial 00:06: activated
[   11.478191] r8169 0000:01:00.0: eth0: link up
[   11.478199] NOHZ: local_softirq_pending 08
[   11.478258] serial 00:07: activated
[   11.480069] parport_pc 00:08: activated
[   11.489574] sd 0:0:0:0: [sda] Starting disk
[   11.506210] sd 1:0:0:0: [sdb] Starting disk
[   11.778485] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.779225] ata1.00: configured for UDMA/133
[   11.780423] ata5: SATA link down (SStatus 0 SControl 300)
[   11.782440] ata4: SATA link down (SStatus 0 SControl 300)
[   11.784438] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.786399] ata6: SATA link down (SStatus 0 SControl 300)
[   11.788581] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.790077] ata3.00: configured for UDMA/100
[   11.798381] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.800805] ata2.00: configured for UDMA/133
[   12.013892] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   12.230425] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.230644] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.404204] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   12.492238] PM: restore of devices complete after 1027.862 msecs
[   12.501832] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.501834] Restarting tasks ... done.
[   12.804005] PM: Basic memory bitmaps freed
[   14.815578] ata1.00: configured for UDMA/133
[   14.815593] ata1: EH complete
[   14.894933] ata2.00: configured for UDMA/133
[   14.894942] ata2: EH complete
[   15.544156] ata1.00: configured for UDMA/133
[   15.544161] ata1: EH complete
[   15.929809] ata2.00: configured for UDMA/133
[   15.929816] ata2: EH complete
[ 3135.613410] r8169 0000:01:00.0: eth0: link down
[ 3137.973615] r8169 0000:01:00.0: eth0: link up
[ 3378.414729] ata1.00: configured for UDMA/133
[ 3378.414733] ata1: EH complete
[ 3378.763791] ata2.00: configured for UDMA/133
[ 3378.763799] ata2: EH complete
[ 3379.423013] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 3379.423017] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[ 3379.423673] PM: Basic memory bitmaps created
[ 3380.648094] Syncing filesystems ... done.
[ 3380.706653] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 3380.717426] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 3380.731442] PM: Preallocating image memory... done (allocated 555980 pages)
[ 3381.119212] PM: Allocated 2223920 kbytes in 0.38 seconds (5852.42 MB/s)
[ 3381.119214] Suspending console(s) (use no_console_suspend to debug)
[ 3381.119837] parport_pc 00:08: disabled
[ 3381.120100] serial 00:07: disabled
[ 3381.120362] serial 00:06: disabled
[ 3381.120477] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 3381.321031] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3381.323076] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 3381.323100] ACPI handle has no context!
[ 3381.386986] PM: freeze of devices complete after 268.221 msecs
[ 3381.387222] PM: late freeze of devices complete after 0.234 msecs
[ 3381.387487] ACPI: Preparing to enter system sleep state S4
[ 3381.388336] PM: Saving platform NVS memory
[ 3381.391847] Disabling non-boot CPUs ...
[ 3381.401245] CPU 1 is now offline
[ 3381.417184] CPU 2 is now offline
[ 3381.432860] CPU 3 is now offline
[ 3381.432861] SMP alternatives: switching to UP code
[ 3381.437187] PM: Creating hibernation image:
[ 3381.483048] PM: Need to copy 413512 pages
[ 3381.483051] PM: Normal pages needed: 413512 + 1024, available pages: 583541
[   10.295817] PM: Restoring platform NVS memory
[   10.299264] Enabling non-boot CPUs ...
[   10.301982] SMP alternatives: switching to SMP code
[   10.305540] Booting Node 0 Processor 1 APIC 0x4
[   10.401028] CPU1 is up
[   10.401275] Booting Node 0 Processor 2 APIC 0x1
[   10.504036] CPU2 is up
[   10.504368] Booting Node 0 Processor 3 APIC 0x5
[   10.607913] CPU3 is up
[   10.609045] ACPI: Waking up from system sleep state S4
[   10.609529] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[   10.609596] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.609742] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.609816] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.609884] PM: early restore of devices complete after 0.430 msecs
[   10.699878] i915 0000:00:02.0: setting latency timer to 64
[   10.699882] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.699890] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.699894] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.699896] usb usb1: root hub lost power or was reset
[   10.703828] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.703852] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.703894] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.703900] pci 0000:00:1e.0: setting latency timer to 64
[   10.703904] usb usb2: root hub lost power or was reset
[   10.707812] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.707814] ahci 0000:00:1f.2: setting latency timer to 64
[   10.709660] serial 00:06: activated
[   10.710945] serial 00:07: activated
[   10.711059] r8169 0000:01:00.0: eth0: link up
[   10.712517] parport_pc 00:08: activated
[   10.722466] sd 0:0:0:0: [sda] Starting disk
[   10.735102] sd 1:0:0:0: [sdb] Starting disk
[   11.011368] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.012124] ata1.00: configured for UDMA/133
[   11.013302] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.015342] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.017292] ata5: SATA link down (SStatus 0 SControl 300)
[   11.018650] ata3.00: configured for UDMA/100
[   11.019296] ata4: SATA link down (SStatus 0 SControl 300)
[   11.021282] ata6: SATA link down (SStatus 0 SControl 300)
[   11.025386] ata2.00: configured for UDMA/133
[   11.030326] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.245783] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.246778] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.247025] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.432563] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   11.520499] PM: restore of devices complete after 822.521 msecs
[   11.530076] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.530079] Restarting tasks ... done.
[   11.829283] PM: Basic memory bitmaps freed
[   14.047833] ata1.00: configured for UDMA/133
[   14.047840] ata1: EH complete
[   14.411078] ata2.00: configured for UDMA/133
[   14.411083] ata2: EH complete
[   14.738220] ata1.00: configured for UDMA/133
[   14.738225] ata1: EH complete
[   14.829760] ata2.00: configured for UDMA/133
[   14.829766] ata2: EH complete
[   51.958728] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   51.958733] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[   51.958736] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[   51.958740] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[   51.958745] end_request: I/O error, dev sr0, sector 0
[   51.958747] Buffer I/O error on device sr0, logical block 0
[   51.958750] Buffer I/O error on device sr0, logical block 1
[   51.971027] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   51.971031] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[   51.971034] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[   51.971038] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[   51.971043] end_request: I/O error, dev sr0, sector 0
[   51.971046] Buffer I/O error on device sr0, logical block 0
[   51.971049] Buffer I/O error on device sr0, logical block 1
[   51.975536] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   51.975541] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[   51.975544] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[   51.975548] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[   51.975553] end_request: I/O error, dev sr0, sector 0
[   51.975556] Buffer I/O error on device sr0, logical block 0
[   51.975558] Buffer I/O error on device sr0, logical block 1
[  410.414601] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  410.414612] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  410.414620] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  410.414630] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  410.414645] end_request: I/O error, dev sr0, sector 0
[  410.414651] Buffer I/O error on device sr0, logical block 0
[  410.414656] Buffer I/O error on device sr0, logical block 1
[  410.421557] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  410.421565] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  410.421571] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  410.421579] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  410.421590] end_request: I/O error, dev sr0, sector 0
[  410.421594] Buffer I/O error on device sr0, logical block 0
[  410.421599] Buffer I/O error on device sr0, logical block 1
[  410.428378] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  410.428386] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  410.428392] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  410.428400] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  410.428411] end_request: I/O error, dev sr0, sector 0
[  410.428416] Buffer I/O error on device sr0, logical block 0
[  410.428421] Buffer I/O error on device sr0, logical block 1
[  821.045829] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  821.045834] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  821.045838] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  821.045843] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  821.045849] end_request: I/O error, dev sr0, sector 0
[  821.045852] Buffer I/O error on device sr0, logical block 0
[  821.045855] Buffer I/O error on device sr0, logical block 1
[  821.048565] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  821.048571] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  821.048575] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  821.048588] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  821.048594] end_request: I/O error, dev sr0, sector 0
[  821.048597] Buffer I/O error on device sr0, logical block 0
[  821.048600] Buffer I/O error on device sr0, logical block 1
[  821.051285] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  821.051290] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  821.051293] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  821.051298] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  821.051305] end_request: I/O error, dev sr0, sector 0
[  821.051307] Buffer I/O error on device sr0, logical block 0
[  821.051310] Buffer I/O error on device sr0, logical block 1
[ 1121.383259] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[ 1976.459731] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[ 1987.561533] r8169 0000:01:00.0: eth0: link down
[ 1989.869463] r8169 0000:01:00.0: eth0: link up
[ 3168.958857] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3168.958863] ata1.00: failed command: SMART
[ 3168.958868] ata1.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[ 3168.958869]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 3168.958872] ata1.00: status: { DRDY }
[ 3168.958876] ata1: hard resetting link
[ 3169.263176] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3169.263656] ata1.00: configured for UDMA/133
[ 3169.263674] ata1: EH complete
[36910.692486] ata1.00: configured for UDMA/133
[36910.692493] ata1: EH complete
[36911.051671] ata2.00: configured for UDMA/133
[36911.051680] ata2: EH complete
[36911.817863] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[36911.817867] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[36911.818617] PM: Basic memory bitmaps created
[36913.135850] Syncing filesystems ... done.
[36913.200140] Freezing user space processes ... (elapsed 0.01 seconds) done.
[36913.211075] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[36913.225103] PM: Preallocating image memory... done (allocated 555949 pages)
[36913.974160] PM: Allocated 2223796 kbytes in 0.75 seconds (2965.06 MB/s)
[36913.974162] Suspending console(s) (use no_console_suspend to debug)
[36913.974424] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[36913.974987] parport_pc 00:08: disabled
[36913.975278] serial 00:07: disabled
[36913.975548] serial 00:06: disabled
[36914.174879] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[36914.176939] HDA Intel 0000:00:1b.0: PCI INT A disabled
[36914.176964] ACPI handle has no context!
[36914.240854] PM: freeze of devices complete after 267.147 msecs
[36914.241091] PM: late freeze of devices complete after 0.235 msecs
[36914.241364] ACPI: Preparing to enter system sleep state S4
[36914.242207] PM: Saving platform NVS memory
[36914.245759] Disabling non-boot CPUs ...
[36914.263033] CPU 1 is now offline
[36914.278885] CPU 2 is now offline
[36914.294707] CPU 3 is now offline
[36914.294709] SMP alternatives: switching to UP code
[36914.299013] PM: Creating hibernation image:
[36914.347433] PM: Need to copy 410793 pages
[36914.347435] PM: Normal pages needed: 410793 + 1024, available pages: 586260
[   10.303072] PM: Restoring platform NVS memory
[   10.306518] Enabling non-boot CPUs ...
[   10.309262] SMP alternatives: switching to SMP code
[   10.312824] Booting Node 0 Processor 1 APIC 0x4
[   10.408302] CPU1 is up
[   10.408549] Booting Node 0 Processor 2 APIC 0x1
[   10.511295] CPU2 is up
[   10.511621] Booting Node 0 Processor 3 APIC 0x5
[   10.615170] CPU3 is up
[   10.616314] ACPI: Waking up from system sleep state S4
[   10.616850] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   10.616995] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   10.617069] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   10.617135] PM: early restore of devices complete after 0.424 msecs
[   10.704633] i915 0000:00:02.0: setting latency timer to 64
[   10.704643] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.704652] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.704656] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.704659] usb usb1: root hub lost power or was reset
[   10.708606] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   10.708631] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   10.708673] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.708682] usb usb2: root hub lost power or was reset
[   10.712613] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   10.712632] pci 0000:00:1e.0: setting latency timer to 64
[   10.712643] ahci 0000:00:1f.2: setting latency timer to 64
[   10.714656] serial 00:06: activated
[   10.716153] serial 00:07: activated
[   10.716459] r8169 0000:01:00.0: eth0: link up
[   10.717963] parport_pc 00:08: activated
[   10.741393] sd 0:0:0:0: [sda] Starting disk
[   10.741415] sd 1:0:0:0: [sdb] Starting disk
[   11.016656] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.017438] ata1.00: configured for UDMA/133
[   11.020580] ata6: SATA link down (SStatus 0 SControl 300)
[   11.022571] ata5: SATA link down (SStatus 0 SControl 300)
[   11.024567] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.026685] ata4: SATA link down (SStatus 0 SControl 300)
[   11.027803] ata3.00: configured for UDMA/100
[   11.035541] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   11.251131] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   11.435742] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.447630] ata2.00: configured for UDMA/133
[   11.467729] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.467957] hub 2-1:1.0: hub_port_status failed (err = -32)
[   11.641319] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   11.729193] PM: restore of devices complete after 1026.908 msecs
[   11.738715] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   11.738717] Restarting tasks ... done.
[   12.065354] PM: Basic memory bitmaps freed
[   14.242494] ata1.00: configured for UDMA/133
[   14.242499] ata1: EH complete
[   14.596618] ata2.00: configured for UDMA/133
[   14.596626] ata2: EH complete
[   15.093483] ata1.00: configured for UDMA/133
[   15.093486] ata1: EH complete
[   15.180473] ata2.00: configured for UDMA/133
[   15.180478] ata2: EH complete
[12867.201926] ata1.00: configured for UDMA/133
[12867.201930] ata1: EH complete
[12867.557679] ata2.00: configured for UDMA/133
[12867.557687] ata2: EH complete
[12868.724226] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[12868.724230] PM: Marking nosave pages: 00000000bb780000 - 0000000100000000
[12868.724942] PM: Basic memory bitmaps created
[12870.021702] Syncing filesystems ... done.
[12870.101787] Freezing user space processes ... (elapsed 0.01 seconds) done.
[12870.112720] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[12870.126805] PM: Preallocating image memory... done (allocated 555980 pages)
[12871.219076] PM: Allocated 2223920 kbytes in 1.09 seconds (2040.29 MB/s)
[12871.219077] Suspending console(s) (use no_console_suspend to debug)
[12871.219386] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[12871.219941] parport_pc 00:08: disabled
[12871.220211] serial 00:07: disabled
[12871.220473] serial 00:06: disabled
[12871.419696] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12871.421774] HDA Intel 0000:00:1b.0: PCI INT A disabled
[12871.421799] ACPI handle has no context!
[12871.488660] PM: freeze of devices complete after 270.031 msecs
[12871.488899] PM: late freeze of devices complete after 0.237 msecs
[12871.489169] ACPI: Preparing to enter system sleep state S4
[12871.490012] PM: Saving platform NVS memory
[12871.493573] Disabling non-boot CPUs ...
[12871.510837] CPU 1 is now offline
[12871.526819] CPU 2 is now offline
[12871.542527] CPU 3 is now offline
[12871.542529] SMP alternatives: switching to UP code
[12871.546798] PM: Creating hibernation image:
[12871.592329] PM: Need to copy 431903 pages
[12871.592331] PM: Normal pages needed: 431903 + 1024, available pages: 565150
[   11.265544] PM: Restoring platform NVS memory
[   11.268989] Enabling non-boot CPUs ...
[   11.271754] SMP alternatives: switching to SMP code
[   11.275313] Booting Node 0 Processor 1 APIC 0x4
[   11.370793] CPU1 is up
[   11.371040] Booting Node 0 Processor 2 APIC 0x1
[   11.473785] CPU2 is up
[   11.474109] Booting Node 0 Processor 3 APIC 0x5
[   11.577663] CPU3 is up
[   11.578804] ACPI: Waking up from system sleep state S4
[   11.579338] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[   11.579484] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[   11.579558] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[   11.579625] PM: early restore of devices complete after 0.425 msecs
[   11.663869] i915 0000:00:02.0: setting latency timer to 64
[   11.663874] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[   11.663881] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.663885] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.663888] usb usb1: root hub lost power or was reset
[   11.667800] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[   11.667822] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   11.667862] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.667868] pci 0000:00:1e.0: setting latency timer to 64
[   11.667871] usb usb2: root hub lost power or was reset
[   11.671784] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[   11.671792] ahci 0000:00:1f.2: setting latency timer to 64
[   11.673785] serial 00:06: activated
[   11.675298] serial 00:07: activated
[   11.675848] r8169 0000:01:00.0: eth0: link up
[   11.677103] parport_pc 00:08: activated
[   11.698066] sd 0:0:0:0: [sda] Starting disk
[   11.698114] sd 1:0:0:0: [sdb] Starting disk
[   11.976163] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.976802] ata1.00: configured for UDMA/133
[   11.978117] ata6: SATA link down (SStatus 0 SControl 300)
[   11.980077] ata5: SATA link down (SStatus 0 SControl 300)
[   11.982147] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.985140] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   11.986136] ata4: SATA link down (SStatus 0 SControl 300)
[   11.988432] ata3.00: configured for UDMA/100
[   11.994234] ata2.00: configured for UDMA/133
[   11.995043] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   12.210640] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[   12.211645] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.211892] hub 2-1:1.0: hub_port_status failed (err = -32)
[   12.397261] usb 2-1.3: reset high speed USB device using ehci_hcd and address 9
[   12.485322] PM: restore of devices complete after 823.345 msecs
[   12.494875] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[   12.494877] Restarting tasks ... done.
[   12.790952] PM: Basic memory bitmaps freed
[   14.885272] ata1.00: configured for UDMA/133
[   14.885276] ata1: EH complete
[   14.970505] ata2.00: configured for UDMA/133
[   14.970512] ata2: EH complete
[   15.297238] ata1.00: configured for UDMA/133
[   15.297245] ata1: EH complete
[   15.378094] ata2.00: configured for UDMA/133
[   15.378102] ata2: EH complete
[  232.786967] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  232.786971] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  232.786974] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  232.786978] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  232.786983] end_request: I/O error, dev sr0, sector 0
[  232.786985] Buffer I/O error on device sr0, logical block 0
[  232.786987] Buffer I/O error on device sr0, logical block 1
[  232.789070] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  232.789075] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  232.789079] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  232.789084] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  232.789092] end_request: I/O error, dev sr0, sector 0
[  232.789095] Buffer I/O error on device sr0, logical block 0
[  232.789098] Buffer I/O error on device sr0, logical block 1
[  232.791168] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  232.791173] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  232.791177] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  232.791181] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  232.791189] end_request: I/O error, dev sr0, sector 0
[  232.791192] Buffer I/O error on device sr0, logical block 0
[  232.791195] Buffer I/O error on device sr0, logical block 1
[  471.811580] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  471.811588] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  471.811595] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  471.811602] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  471.811613] end_request: I/O error, dev sr0, sector 0
[  471.811618] Buffer I/O error on device sr0, logical block 0
[  471.815514] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  471.815521] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  471.815527] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  471.815544] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  471.815561] end_request: I/O error, dev sr0, sector 0
[  471.815566] Buffer I/O error on device sr0, logical block 0
[  471.818236] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  471.818243] sr 2:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[  471.818248] sr 2:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[  471.818255] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
[  471.818266] end_request: I/O error, dev sr0, sector 0
[  471.818270] Buffer I/O error on device sr0, logical block 0
[  792.666330] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[  794.200844] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[13997.352785] npviewer.bin[22238]: segfault at 30 ip 00000000f5de05ed sp 00000000ffec82f0 error 4 in libflashplayer.so[f5d87000+b2c000]
[15290.772838] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[15290.772847] ata1.00: failed command: SMART
[15290.772856] ata1.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[15290.772858]          res 40/00:3c:68:f7:96/00:00:03:00:00/40 Emask 0x4 (timeout)
[15290.772862] ata1.00: status: { DRDY }
[15290.772868] ata1: hard resetting link
[15291.078955] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15291.079471] ata1.00: configured for UDMA/133
[15291.079493] ata1: EH complete
[15311.728720] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[15311.728729] ata1.00: failed command: SMART
[15311.728739] ata1.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[15311.728740]          res 40/00:3c:68:f7:96/00:00:03:00:00/40 Emask 0x4 (timeout)
[15311.728745] ata1.00: status: { DRDY }
[15311.728751] ata1: hard resetting link
[15312.032903] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15312.033418] ata1.00: configured for UDMA/133
[15312.033445] ata1: EH complete
[15658.674070] r8169 0000:01:00.0: eth0: link down
[15660.974695] r8169 0000:01:00.0: eth0: link up
[15734.775654] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[15734.775662] ata1.00: failed command: SMART
[15734.775671] ata1.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[15734.775673]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[15734.775677] ata1.00: status: { DRDY }
[15734.775684] ata1: hard resetting link
[15735.079901] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15735.080571] ata1.00: configured for UDMA/133
[15735.080594] ata1: EH complete
[15805.626508] ata1.00: NCQ disabled due to excessive errors
[15805.626515] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[15805.626521] ata1.00: failed command: SMART
[15805.626529] ata1.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[15805.626531]          res 40/00:04:00:96:c8/00:00:05:00:00/40 Emask 0x4 (timeout)
[15805.626535] ata1.00: status: { DRDY }
[15805.626541] ata1: hard resetting link
[15805.930794] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15805.931411] ata1.00: configured for UDMA/133
[15805.931433] ata1: EH complete
[15826.578441] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[15826.578449] ata1.00: failed command: SMART
[15826.578458] ata1.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[15826.578460]          res 40/00:04:00:96:c8/00:00:05:00:00/40 Emask 0x4 (timeout)
[15826.578464] ata1.00: status: { DRDY }
[15826.578470] ata1: hard resetting link
[15826.883748] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15826.884462] ata1.00: configured for UDMA/133
[15826.884491] ata1: EH complete
[15975.235861] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[15975.235871] ata1.00: failed command: SMART
[15975.235882] ata1.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[15975.235885]          res 40/00:00:ff:96:c8/00:00:05:00:00/e5 Emask 0x4 (timeout)
[15975.235890] ata1.00: status: { DRDY }
[15975.235899] ata1: hard resetting link
[15975.540982] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15975.541512] ata1.00: configured for UDMA/133
[15975.541536] ata1: EH complete
[15996.197545] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[15996.197553] ata1.00: failed command: SMART
[15996.197563] ata1.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in
[15996.197565]          res 40/00:00:ff:96:c8/00:00:05:00:00/e5 Emask 0x4 (timeout)
[15996.197569] ata1.00: status: { DRDY }
[15996.197575] ata1: hard resetting link
[15996.502843] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15996.503370] ata1.00: configured for UDMA/133
[15996.503394] ata1: EH complete