| 1 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-62-generic] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Model Family: Xmore pSLC NAND Industrial M.2 2280 SATA SSD add by REA GmbH
|
|---|
| 6 | Device Model: M2CA032GXAIMS-003Z
|
|---|
| 7 | Serial Number: 6891079C021700059826
|
|---|
| 8 | LU WWN Device Id: 0 000000 000000000
|
|---|
| 9 | Firmware Version: XP01.1GB
|
|---|
| 10 | User Capacity: 32.017.047.552 bytes [32,0 GB]
|
|---|
| 11 | Sector Size: 512 bytes logical/physical
|
|---|
| 12 | Rotation Rate: Solid State Device
|
|---|
| 13 | Form Factor: M.2
|
|---|
| 14 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 15 | ATA Version is: Unknown(0x0ff8) (minor revision not indicated)
|
|---|
| 16 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 17 | Local Time is: Tue Jul 14 19:07:05 2020 CEST
|
|---|
| 18 | SMART support is: Available - device has SMART capability.
|
|---|
| 19 | SMART support is: Enabled
|
|---|
| 20 |
|
|---|
| 21 | === START OF READ SMART DATA SECTION ===
|
|---|
| 22 | SMART Status not supported: Incomplete response, ATA output registers missing
|
|---|
| 23 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 24 | Warning: This result is based on an Attribute check.
|
|---|
| 25 |
|
|---|
| 26 | General SMART Values:
|
|---|
| 27 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 28 | was never started.
|
|---|
| 29 | Auto Offline Data Collection: Disabled.
|
|---|
| 30 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 31 | without error or no self-test has ever
|
|---|
| 32 | been run.
|
|---|
| 33 | Total time to complete Offline
|
|---|
| 34 | data collection: (65535) seconds.
|
|---|
| 35 | Offline data collection
|
|---|
| 36 | capabilities: (0x79) SMART execute Offline immediate.
|
|---|
| 37 | No Auto Offline data collection support.
|
|---|
| 38 | Suspend Offline collection upon new
|
|---|
| 39 | command.
|
|---|
| 40 | Offline surface scan supported.
|
|---|
| 41 | Self-test supported.
|
|---|
| 42 | Conveyance Self-test supported.
|
|---|
| 43 | Selective Self-test supported.
|
|---|
| 44 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 45 | power-saving mode.
|
|---|
| 46 | Supports SMART auto save timer.
|
|---|
| 47 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 48 | General Purpose Logging supported.
|
|---|
| 49 | Short self-test routine
|
|---|
| 50 | recommended polling time: ( 2) minutes.
|
|---|
| 51 | Extended self-test routine
|
|---|
| 52 | recommended polling time: ( 30) minutes.
|
|---|
| 53 | Conveyance self-test routine
|
|---|
| 54 | recommended polling time: ( 6) minutes.
|
|---|
| 55 |
|
|---|
| 56 | SMART Attributes Data Structure revision number: 16
|
|---|
| 57 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 58 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 59 | 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
|
|---|
| 60 | 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 568
|
|---|
| 61 | 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 22756
|
|---|
| 62 | 168 SATA_PHY_Err_Ct 0x0012 100 100 000 Old_age Always - 0
|
|---|
| 63 | 169 NA 0x0000 100 100 000 Old_age Offline - 8
|
|---|
| 64 | 170 Bad_Blk_Ct_Erl/Lat 0x0003 092 092 010 Pre-fail Always - 0/50
|
|---|
| 65 | 173 MaxAvgErase_Ct 0x0012 100 100 000 Old_age Always - 600 (Average 489)
|
|---|
| 66 | 192 Unexpect_Power_Loss_Ct 0x0012 100 100 000 Old_age Always - 22685
|
|---|
| 67 | 218 SATA_CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 1
|
|---|
| 68 | 231 Perc_Rated_Life_Remain 0x0013 100 100 000 Pre-fail Always - 97
|
|---|
| 69 | 241 Host_Writes_GiB 0x0032 100 100 000 Old_age Always - 14248
|
|---|
| 70 |
|
|---|
| 71 | SMART Error Log Version: 1
|
|---|
| 72 | No Errors Logged
|
|---|
| 73 |
|
|---|
| 74 | SMART Self-test log structure revision number 1
|
|---|
| 75 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 76 | # 1 Short offline Completed without error 00% 567 -
|
|---|
| 77 | # 2 Short offline Completed without error 00% 566 -
|
|---|
| 78 | # 3 Short offline Completed without error 00% 566 -
|
|---|
| 79 | # 4 Short offline Completed without error 00% 566 -
|
|---|
| 80 | # 5 Short offline Completed without error 00% 566 -
|
|---|
| 81 | # 6 Short offline Completed without error 00% 566 -
|
|---|
| 82 | # 7 Short offline Completed without error 00% 566 -
|
|---|
| 83 |
|
|---|
| 84 | SMART Selective self-test log data structure revision number 0
|
|---|
| 85 | Note: revision number not 1 implies that no selective self-test has ever been run
|
|---|
| 86 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 87 | 1 0 0 Not_testing
|
|---|
| 88 | 2 0 0 Not_testing
|
|---|
| 89 | 3 0 0 Not_testing
|
|---|
| 90 | 4 0 0 Not_testing
|
|---|
| 91 | 5 0 0 Not_testing
|
|---|
| 92 | Selective self-test flags (0x0):
|
|---|
| 93 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 94 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 95 |
|
|---|
