1 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-8-amd64] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: INTEL SSDSC2BB480H4
|
---|
6 | Firmware Version: D2010380
|
---|
7 | User Capacity: 480 103 981 056 bytes [480 GB]
|
---|
8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
9 | Rotation Rate: Solid State Device
|
---|
10 | Form Factor: 2.5 inches
|
---|
11 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
12 | ATA Version is: ACS-2 T13/2015-D revision 3
|
---|
13 | SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
14 | Local Time is: Sat Jun 22 23:34:51 2019 CEST
|
---|
15 | SMART support is: Available - device has SMART capability.
|
---|
16 | SMART support is: Enabled
|
---|
17 |
|
---|
18 | === START OF READ SMART DATA SECTION ===
|
---|
19 | SMART overall-health self-assessment test result: PASSED
|
---|
20 |
|
---|
21 | General SMART Values:
|
---|
22 | Offline data collection status: (0x02) Offline data collection activity
|
---|
23 | was completed without error.
|
---|
24 | Auto Offline Data Collection: Disabled.
|
---|
25 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
26 | without error or no self-test has ever
|
---|
27 | been run.
|
---|
28 | Total time to complete Offline
|
---|
29 | data collection: ( 2) seconds.
|
---|
30 | Offline data collection
|
---|
31 | capabilities: (0x79) SMART execute Offline immediate.
|
---|
32 | No Auto Offline data collection support.
|
---|
33 | Suspend Offline collection upon new
|
---|
34 | command.
|
---|
35 | Offline surface scan supported.
|
---|
36 | Self-test supported.
|
---|
37 | Conveyance Self-test supported.
|
---|
38 | Selective Self-test supported.
|
---|
39 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
40 | power-saving mode.
|
---|
41 | Supports SMART auto save timer.
|
---|
42 | Error logging capability: (0x01) Error logging supported.
|
---|
43 | General Purpose Logging supported.
|
---|
44 | Short self-test routine
|
---|
45 | recommended polling time: ( 1) minutes.
|
---|
46 | Extended self-test routine
|
---|
47 | recommended polling time: ( 2) minutes.
|
---|
48 | Conveyance self-test routine
|
---|
49 | recommended polling time: ( 2) minutes.
|
---|
50 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
51 | SCT Error Recovery Control supported.
|
---|
52 | SCT Feature Control supported.
|
---|
53 | SCT Data Table supported.
|
---|
54 |
|
---|
55 | SMART Attributes Data Structure revision number: 1
|
---|
56 | Vendor Specific SMART Attributes with Thresholds:
|
---|
57 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
---|
58 | 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
|
---|
59 | 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 20130
|
---|
60 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 24
|
---|
61 | 170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0
|
---|
62 | 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
|
---|
63 | 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
|
---|
64 | 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 23
|
---|
65 | 175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 498389615237
|
---|
66 | 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
|
---|
67 | 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
|
---|
68 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
---|
69 | 190 Airflow_Temperature_Cel 0x0022 081 074 000 Old_age Always - 19 (Min/Max 15/29)
|
---|
70 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 23
|
---|
71 | 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 30
|
---|
72 | 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
|
---|
73 | 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
|
---|
74 | 225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 3386678
|
---|
75 | 226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 7710
|
---|
76 | 227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 11
|
---|
77 | 228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 1207758
|
---|
78 | 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
|
---|
79 | 233 Media_Wearout_Indicator 0x0032 093 093 000 Old_age Always - 0
|
---|
80 | 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
|
---|
81 | 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 3386678
|
---|
82 | 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 454202
|
---|
83 |
|
---|
84 | SMART Error Log Version: 1
|
---|
85 | No Errors Logged
|
---|
86 |
|
---|
87 | SMART Self-test log structure revision number 1
|
---|
88 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
89 | # 1 Short offline Completed without error 00% 20130 -
|
---|
90 | # 2 Short offline Completed without error 00% 13323 -
|
---|
91 | # 3 Short offline Completed without error 00% 13320 -
|
---|
92 | # 4 Short offline Completed without error 00% 13320 -
|
---|
93 | # 5 Short offline Completed without error 00% 13298 -
|
---|
94 | # 6 Short offline Completed without error 00% 13297 -
|
---|
95 | # 7 Short offline Completed without error 00% 13258 -
|
---|
96 | # 8 Short offline Completed without error 00% 13257 -
|
---|
97 | # 9 Short offline Completed without error 00% 3166 -
|
---|
98 | #10 Short offline Completed without error 00% 3165 -
|
---|
99 | #11 Short offline Completed without error 00% 3165 -
|
---|
100 | #12 Short offline Completed without error 00% 3161 -
|
---|
101 | #13 Short offline Completed without error 00% 17 -
|
---|
102 | #14 Short offline Completed without error 00% 1 -
|
---|
103 | #15 Short offline Completed without error 00% 1 -
|
---|
104 |
|
---|
105 | SMART Selective self-test log data structure revision number 1
|
---|
106 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
107 | 1 0 0 Not_testing
|
---|
108 | 2 0 0 Not_testing
|
---|
109 | 3 0 0 Not_testing
|
---|
110 | 4 0 0 Not_testing
|
---|
111 | 5 0 0 Not_testing
|
---|
112 | Selective self-test flags (0x0):
|
---|
113 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
114 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
115 |
|
---|