| 1 | smartctl 7.1 2019-12-30 r5022 [Darwin 19.4.0 x86_64] (local build)
|
|---|
| 2 | Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Model Family: Intel 320 Series SSDs
|
|---|
| 6 | Device Model: INTEL SSDSA2BW160G3H
|
|---|
| 7 | Serial Number: CVPR14530EKE160DGN
|
|---|
| 8 | LU WWN Device Id: 5 001517 bb27268a2
|
|---|
| 9 | Firmware Version: 4PC10365
|
|---|
| 10 | User Capacity: 160,041,885,696 bytes [160 GB]
|
|---|
| 11 | Sector Size: 512 bytes logical/physical
|
|---|
| 12 | Rotation Rate: Solid State Device
|
|---|
| 13 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 14 | ATA Version is: ATA8-ACS T13/1699-D revision 4
|
|---|
| 15 | SATA Version is: SATA 2.6, 3.0 Gb/s
|
|---|
| 16 | Local Time is: Thu May 14 01:07:00 2020 CDT
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 | AAM feature is: Unavailable
|
|---|
| 20 | APM feature is: Unavailable
|
|---|
| 21 | Rd look-ahead is: Enabled
|
|---|
| 22 | Write cache is: Enabled
|
|---|
| 23 | DSN feature is: Unavailable
|
|---|
| 24 | ATA Security is: Disabled, frozen [SEC2]
|
|---|
| 25 | Unexpected SCT status 0x0002 (action_code=4, function_code=2)
|
|---|
| 26 | Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|---|
| 27 |
|
|---|
| 28 | === START OF READ SMART DATA SECTION ===
|
|---|
| 29 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 30 |
|
|---|
| 31 | General SMART Values:
|
|---|
| 32 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 33 | was never started.
|
|---|
| 34 | Auto Offline Data Collection: Disabled.
|
|---|
| 35 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 36 | without error or no self-test has ever
|
|---|
| 37 | been run.
|
|---|
| 38 | Total time to complete Offline
|
|---|
| 39 | data collection: ( 1) seconds.
|
|---|
| 40 | Offline data collection
|
|---|
| 41 | capabilities: (0x75) SMART execute Offline immediate.
|
|---|
| 42 | No Auto Offline data collection support.
|
|---|
| 43 | Abort Offline collection upon new
|
|---|
| 44 | command.
|
|---|
| 45 | No Offline surface scan supported.
|
|---|
| 46 | Self-test supported.
|
|---|
| 47 | Conveyance Self-test supported.
|
|---|
| 48 | Selective Self-test supported.
|
|---|
| 49 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 50 | power-saving mode.
|
|---|
| 51 | Supports SMART auto save timer.
|
|---|
| 52 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 53 | General Purpose Logging supported.
|
|---|
| 54 | Short self-test routine
|
|---|
| 55 | recommended polling time: ( 1) minutes.
|
|---|
| 56 | Extended self-test routine
|
|---|
| 57 | recommended polling time: ( 22) minutes.
|
|---|
| 58 | Conveyance self-test routine
|
|---|
| 59 | recommended polling time: ( 1) minutes.
|
|---|
| 60 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 61 | SCT Error Recovery Control supported.
|
|---|
| 62 | SCT Feature Control supported.
|
|---|
| 63 | SCT Data Table supported.
|
|---|
| 64 |
|
|---|
| 65 | SMART Attributes Data Structure revision number: 5
|
|---|
| 66 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 67 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 68 | 3 Spin_Up_Time -----K 100 100 000 - 0
|
|---|
| 69 | 4 Start_Stop_Count ----CK 100 100 000 - 0
|
|---|
| 70 | 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
|---|
| 71 | 9 Power_On_Hours -O--CK 100 100 000 - 3946
|
|---|
| 72 | 12 Power_Cycle_Count -O--CK 100 100 000 - 2621
|
|---|
| 73 | 170 Reserve_Block_Count PO--CK 100 100 010 - 0
|
|---|
| 74 | 171 Program_Fail_Count -O--CK 100 100 000 - 0
|
|---|
| 75 | 172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
|---|
| 76 | 183 SATA_Downshift_Count -O--CK 100 100 010 - 0
|
|---|
| 77 | 184 End-to-End_Error PO--CK 100 100 097 - 0
|
|---|
| 78 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|---|
| 79 | 192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 28
|
|---|
| 80 | 199 CRC_Error_Count -OS-CK 100 100 000 - 0
|
|---|
| 81 | 225 Host_Writes_32MiB -O--CK 100 100 000 - 233561
|
|---|
| 82 | 226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535
|
|---|
| 83 | 227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535
|
|---|
| 84 | 228 Workload_Minutes -O--CK 100 100 000 - 65535
|
|---|
| 85 | 232 Available_Reservd_Space PO--CK 100 100 010 - 0
|
|---|
| 86 | 233 Media_Wearout_Indicator -O--CK 099 099 000 - 0
|
|---|
| 87 | 241 Host_Writes_32MiB -O--CK 100 100 000 - 233561
|
|---|
| 88 | 242 Host_Reads_32MiB -O--CK 100 100 000 - 269467
|
|---|
| 89 | ||||||_ K auto-keep
|
|---|
| 90 | |||||__ C event count
|
|---|
| 91 | ||||___ R error rate
|
|---|
| 92 | |||____ S speed/performance
|
|---|
| 93 | ||_____ O updated online
|
|---|
| 94 | |______ P prefailure warning
|
|---|
| 95 |
|
|---|
| 96 | Log Directories not read due to '-F nologdir' option
|
|---|
| 97 |
|
|---|
| 98 | ATA_READ_LOG_EXT (addr=0x03:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented
|
|---|
| 99 | Read SMART Extended Comprehensive Error Log failed
|
|---|
| 100 |
|
|---|
| 101 | SMART Error Log Version: 1
|
|---|
| 102 | No Errors Logged
|
|---|
| 103 |
|
|---|
| 104 | ATA_READ_LOG_EXT (addr=0x07:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented
|
|---|
| 105 | Read SMART Extended Self-test Log failed
|
|---|
| 106 |
|
|---|
| 107 | SMART Self-test log structure revision number 1
|
|---|
| 108 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 109 | # 1 Extended offline Completed without error 00% 3946 -
|
|---|
| 110 | # 2 Extended offline Completed without error 00% 3946 -
|
|---|
| 111 | # 3 Short offline Completed without error 00% 241 -
|
|---|
| 112 | # 4 Short offline Completed without error 00% 241 -
|
|---|
| 113 |
|
|---|
| 114 | SMART Selective self-test log data structure revision number 0
|
|---|
| 115 | Note: revision number not 1 implies that no selective self-test has ever been run
|
|---|
| 116 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 117 | 1 0 0 Not_testing
|
|---|
| 118 | 2 0 0 Not_testing
|
|---|
| 119 | 3 0 0 Not_testing
|
|---|
| 120 | 4 0 0 Not_testing
|
|---|
| 121 | 5 0 0 Not_testing
|
|---|
| 122 | Selective self-test flags (0x0):
|
|---|
| 123 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 124 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 125 |
|
|---|
| 126 | SCT Status Version: 3
|
|---|
| 127 | SCT Version (vendor specific): 1 (0x0001)
|
|---|
| 128 | Device State: Active (0)
|
|---|
| 129 | Current Temperature: ? Celsius
|
|---|
| 130 | Power Cycle Min/Max Temperature: ?/ ? Celsius
|
|---|
| 131 | Lifetime Min/Max Temperature: ?/ ? Celsius
|
|---|
| 132 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 133 |
|
|---|
| 134 | Read SCT Data Table failed: Undefined error: 0
|
|---|
| 135 | Read SCT Temperature History failed
|
|---|
| 136 |
|
|---|
| 137 | SMART WRITE LOG does not return COUNT and LBA_LOW register
|
|---|
| 138 | SCT (Get) Error Recovery Control command failed
|
|---|
| 139 |
|
|---|
| 140 | ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented
|
|---|
| 141 | Read Device Statistics page 0x00 failed
|
|---|
| 142 |
|
|---|
| 143 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 144 |
|
|---|
| 145 | ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented
|
|---|
| 146 | Read SATA Phy Event Counters failed
|
|---|
