1 | lbtsnas: ~# smartctl /dev/da0 -x -q noserial
|
---|
2 | smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p4 amd64] (local build)
|
---|
3 | Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
4 |
|
---|
5 | === START OF INFORMATION SECTION ===
|
---|
6 | Device Model: TOSHIBA MG05ACA800E
|
---|
7 | Firmware Version: GX2A
|
---|
8 | User Capacity: 8,001,563,222,016 bytes [8.00 TB]
|
---|
9 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
10 | Rotation Rate: 7200 rpm
|
---|
11 | Form Factor: 3.5 inches
|
---|
12 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
13 | ATA Version is: ACS-3 T13/2161-D revision 5
|
---|
14 | SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
15 | Local Time is: Mon May 4 21:49:01 2020 CEST
|
---|
16 | SMART support is: Available - device has SMART capability.
|
---|
17 | SMART support is: Enabled
|
---|
18 | AAM feature is: Unavailable
|
---|
19 | APM level is: 128 (minimum power consumption without standby)
|
---|
20 | Rd look-ahead is: Enabled
|
---|
21 | Write cache is: Enabled
|
---|
22 | DSN feature is: Disabled
|
---|
23 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
24 | Wt Cache Reorder: Enabled
|
---|
25 |
|
---|
26 | === START OF READ SMART DATA SECTION ===
|
---|
27 | SMART overall-health self-assessment test result: PASSED
|
---|
28 |
|
---|
29 | General SMART Values:
|
---|
30 | Offline data collection status: (0x80) Offline data collection activity
|
---|
31 | was never started.
|
---|
32 | Auto Offline Data Collection: Enabled.
|
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
34 | without error or no self-test has ever
|
---|
35 | been run.
|
---|
36 | Total time to complete Offline
|
---|
37 | data collection: ( 120) seconds.
|
---|
38 | Offline data collection
|
---|
39 | capabilities: (0x5b) SMART execute Offline immediate.
|
---|
40 | Auto Offline data collection on/off support.
|
---|
41 | Suspend Offline collection upon new
|
---|
42 | command.
|
---|
43 | Offline surface scan supported.
|
---|
44 | Self-test supported.
|
---|
45 | No Conveyance Self-test supported.
|
---|
46 | Selective Self-test supported.
|
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
48 | power-saving mode.
|
---|
49 | Supports SMART auto save timer.
|
---|
50 | Error logging capability: (0x01) Error logging supported.
|
---|
51 | General Purpose Logging supported.
|
---|
52 | Short self-test routine
|
---|
53 | recommended polling time: ( 2) minutes.
|
---|
54 | Extended self-test routine
|
---|
55 | recommended polling time: ( 736) minutes.
|
---|
56 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
57 | SCT Error Recovery Control supported.
|
---|
58 | SCT Feature Control supported.
|
---|
59 | SCT Data Table supported.
|
---|
60 |
|
---|
61 | SMART Attributes Data Structure revision number: 16
|
---|
62 | Vendor Specific SMART Attributes with Thresholds:
|
---|
63 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
64 | 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
---|
65 | 2 Throughput_Performance P-S--- 100 100 050 - 0
|
---|
66 | 3 Spin_Up_Time POS--K 100 100 001 - 6439
|
---|
67 | 4 Start_Stop_Count -O--CK 100 100 000 - 19
|
---|
68 | 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
|
---|
69 | 7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
---|
70 | 8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
---|
71 | 9 Power_On_Hours -O--CK 100 100 000 - 7
|
---|
72 | 10 Spin_Retry_Count PO--CK 100 100 030 - 0
|
---|
73 | 12 Power_Cycle_Count -O--CK 100 100 000 - 19
|
---|
74 | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
---|
75 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 18
|
---|
76 | 193 Load_Cycle_Count -O--CK 100 100 000 - 19
|
---|
77 | 194 Temperature_Celsius -O---K 100 100 000 - 41 (Min/Max 20/41)
|
---|
78 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
---|
79 | 197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
---|
80 | 198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
---|
81 | 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0
|
---|
82 | 220 Disk_Shift -O---- 100 100 000 - 0
|
---|
83 | 222 Loaded_Hours -O--CK 100 100 000 - 7
|
---|
84 | 223 Load_Retry_Count -O--CK 100 100 000 - 0
|
---|
85 | 224 Load_Friction -O---K 100 100 000 - 0
|
---|
86 | 226 Load-in_Time -OS--K 100 100 000 - 544
|
---|
87 | 240 Head_Flying_Hours P----- 100 100 001 - 0
|
---|
88 | ||||||_ K auto-keep
|
---|
89 | |||||__ C event count
|
---|
90 | ||||___ R error rate
|
---|
91 | |||____ S speed/performance
|
---|
92 | ||_____ O updated online
|
---|
93 | |______ P prefailure warning
|
---|
94 |
|
---|
95 | General Purpose Log Directory Version 1
|
---|
96 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
97 | Address Access R/W Size Description
|
---|
98 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
99 | 0x01 SL R/O 1 Summary SMART error log
|
---|
100 | 0x02 SL R/O 51 Comprehensive SMART error log
|
---|
101 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
---|
102 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
103 | 0x06 SL R/O 1 SMART self-test log
|
---|
104 | 0x07 GPL R/O 1 Extended self-test log
|
---|
105 | 0x08 GPL R/O 2 Power Conditions log
|
---|
106 | 0x09 SL R/W 1 Selective self-test log
|
---|
107 | 0x0a GPL R/W 2 Device Statistics Notification
|
---|
108 | 0x0c GPL R/O 2048 Pending Defects log
|
---|
109 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
110 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
111 | 0x24 GPL R/O 16384 Current Device Internal Status Data log
|
---|
112 | 0x25 GPL R/O 16384 Saved Device Internal Status Data log
|
---|
113 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
114 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
115 | 0xa7 GPL VS 8 Device vendor specific log
|
---|
116 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
117 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
118 |
|
---|
119 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
---|
120 | No Errors Logged
|
---|
121 |
|
---|
122 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
123 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
124 |
|
---|
125 | SMART Selective self-test log data structure revision number 1
|
---|
126 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
127 | 1 0 0 Not_testing
|
---|
128 | 2 0 0 Not_testing
|
---|
129 | 3 0 0 Not_testing
|
---|
130 | 4 0 0 Not_testing
|
---|
131 | 5 0 0 Not_testing
|
---|
132 | Selective self-test flags (0x0):
|
---|
133 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
134 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
135 |
|
---|
136 | SCT Status Version: 3
|
---|
137 | SCT Version (vendor specific): 1 (0x0001)
|
---|
138 | Device State: Active (0)
|
---|
139 | Current Temperature: 41 Celsius
|
---|
140 | Power Cycle Min/Max Temperature: 40/41 Celsius
|
---|
141 | Lifetime Min/Max Temperature: 20/41 Celsius
|
---|
142 | Under/Over Temperature Limit Count: 0/0
|
---|
143 |
|
---|
144 | SCT Temperature History Version: 2
|
---|
145 | Temperature Sampling Period: 1 minute
|
---|
146 | Temperature Logging Interval: 1 minute
|
---|
147 | Min/Max recommended Temperature: 5/55 Celsius
|
---|
148 | Min/Max Temperature Limit: 5/55 Celsius
|
---|
149 | Temperature History Size (Index): 478 (26)
|
---|
150 |
|
---|
151 | Index Estimated Time Temperature Celsius
|
---|
152 | 27 2020-05-04 13:52 ? -
|
---|
153 | ... ..(450 skipped). .. -
|
---|
154 | 0 2020-05-04 21:23 ? -
|
---|
155 | 1 2020-05-04 21:24 40 *********************
|
---|
156 | ... ..( 6 skipped). .. *********************
|
---|
157 | 8 2020-05-04 21:31 40 *********************
|
---|
158 | 9 2020-05-04 21:32 41 **********************
|
---|
159 | ... ..( 16 skipped). .. **********************
|
---|
160 | 26 2020-05-04 21:49 41 **********************
|
---|
161 |
|
---|
162 | SCT Error Recovery Control:
|
---|
163 | Read: Disabled
|
---|
164 | Write: Disabled
|
---|
165 |
|
---|
166 | Device Statistics (GP Log 0x04)
|
---|
167 | Page Offset Size Value Flags Description
|
---|
168 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
---|
169 | 0x01 0x008 4 19 --- Lifetime Power-On Resets
|
---|
170 | 0x01 0x010 4 7 --- Power-on Hours
|
---|
171 | 0x01 0x018 6 1 --- Logical Sectors Written
|
---|
172 | 0x01 0x020 6 1 --- Number of Write Commands
|
---|
173 | 0x01 0x028 6 9095 --- Logical Sectors Read
|
---|
174 | 0x01 0x030 6 891 --- Number of Read Commands
|
---|
175 | 0x01 0x038 6 26227736 --- Date and Time TimeStamp
|
---|
176 | 0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
|
---|
177 | 0x02 0x010 4 0 --- Overlimit Shock Events
|
---|
178 | 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
---|
179 | 0x03 0x008 4 7 --- Spindle Motor Power-on Hours
|
---|
180 | 0x03 0x010 4 7 --- Head Flying Hours
|
---|
181 | 0x03 0x018 4 19 --- Head Load Events
|
---|
182 | 0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors
|
---|
183 | 0x03 0x028 4 0 --- Read Recovery Attempts
|
---|
184 | 0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
---|
185 | 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
|
---|
186 | 0x03 0x040 4 18 --- Number of High Priority Unload Events
|
---|
187 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
---|
188 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
---|
189 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
---|
190 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
---|
191 | 0x05 0x008 1 41 --- Current Temperature
|
---|
192 | 0x05 0x010 1 - N-- Average Short Term Temperature
|
---|
193 | 0x05 0x018 1 - N-- Average Long Term Temperature
|
---|
194 | 0x05 0x020 1 41 --- Highest Temperature
|
---|
195 | 0x05 0x028 1 20 --- Lowest Temperature
|
---|
196 | 0x05 0x030 1 - N-- Highest Average Short Term Temperature
|
---|
197 | 0x05 0x038 1 - N-- Lowest Average Short Term Temperature
|
---|
198 | 0x05 0x040 1 - N-- Highest Average Long Term Temperature
|
---|
199 | 0x05 0x048 1 - N-- Lowest Average Long Term Temperature
|
---|
200 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
---|
201 | 0x05 0x058 1 55 --- Specified Maximum Operating Temperature
|
---|
202 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
---|
203 | 0x05 0x068 1 5 --- Specified Minimum Operating Temperature
|
---|
204 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
---|
205 | 0x06 0x008 4 57 --- Number of Hardware Resets
|
---|
206 | 0x06 0x010 4 36 --- Number of ASR Events
|
---|
207 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
---|
208 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
209 | |||_ C monitored condition met
|
---|
210 | ||__ D supports DSN
|
---|
211 | |___ N normalized value
|
---|
212 |
|
---|
213 | Pending Defects log (GP Log 0x0c)
|
---|
214 | No Defects Logged
|
---|
215 |
|
---|
216 | SATA Phy Event Counters (GP Log 0x11)
|
---|
217 | ID Size Value Description
|
---|
218 | 0x0001 4 0 Command failed due to ICRC error
|
---|
219 | 0x0002 4 0 R_ERR response for data FIS
|
---|
220 | 0x0003 4 0 R_ERR response for device-to-host data FIS
|
---|
221 | 0x0004 4 0 R_ERR response for host-to-device data FIS
|
---|
222 | 0x0005 4 0 R_ERR response for non-data FIS
|
---|
223 | 0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
---|
224 | 0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
---|
225 | 0x0008 4 0 Device-to-host non-data FIS retries
|
---|
226 | 0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy
|
---|
227 | 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET
|
---|
228 | 0x000b 4 0 CRC errors within host-to-device FIS
|
---|
229 | 0x000d 4 0 Non-CRC errors within host-to-device FIS
|
---|
230 | 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
---|
231 | 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
232 | 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
233 | 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
234 |
|
---|
235 |
|
---|