| 1 | smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build)
|
|---|
| 2 | Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: Corsair Neutron GTX SSD
|
|---|
| 6 | Firmware Version: M311
|
|---|
| 7 | User Capacity: 120 034 123 776 bytes [120 GB]
|
|---|
| 8 | Sector Size: 512 bytes logical/physical
|
|---|
| 9 | Rotation Rate: Solid State Device
|
|---|
| 10 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 11 | ATA Version is: ATA8-ACS (minor revision not indicated)
|
|---|
| 12 | SATA Version is: SATA 2.5, 6.0 Gb/s
|
|---|
| 13 | Local Time is: Mon Apr 27 12:37:39 2020 EEST
|
|---|
| 14 | SMART support is: Available - device has SMART capability.
|
|---|
| 15 | SMART support is: Enabled
|
|---|
| 16 | AAM feature is: Unavailable
|
|---|
| 17 | APM feature is: Unavailable
|
|---|
| 18 | Rd look-ahead is: Enabled
|
|---|
| 19 | Write cache is: Enabled
|
|---|
| 20 | DSN feature is: Unavailable
|
|---|
| 21 | ATA Security is: Disabled, frozen [SEC2]
|
|---|
| 22 | Wt Cache Reorder: Unavailable
|
|---|
| 23 |
|
|---|
| 24 | === START OF READ SMART DATA SECTION ===
|
|---|
| 25 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 26 |
|
|---|
| 27 | General SMART Values:
|
|---|
| 28 | Offline data collection status: (0x02) Offline data collection activity
|
|---|
| 29 | was completed without error.
|
|---|
| 30 | Auto Offline Data Collection: Disabled.
|
|---|
| 31 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 32 | without error or no self-test has ever
|
|---|
| 33 | been run.
|
|---|
| 34 | Total time to complete Offline
|
|---|
| 35 | data collection: ( 5) seconds.
|
|---|
| 36 | Offline data collection
|
|---|
| 37 | capabilities: (0x19) SMART execute Offline immediate.
|
|---|
| 38 | No Auto Offline data collection support.
|
|---|
| 39 | Suspend Offline collection upon new
|
|---|
| 40 | command.
|
|---|
| 41 | Offline surface scan supported.
|
|---|
| 42 | Self-test supported.
|
|---|
| 43 | No Conveyance Self-test supported.
|
|---|
| 44 | No Selective Self-test supported.
|
|---|
| 45 | SMART capabilities: (0x0002) Does not save SMART data before
|
|---|
| 46 | entering power-saving mode.
|
|---|
| 47 | Supports SMART auto save timer.
|
|---|
| 48 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 49 | No General Purpose Logging support.
|
|---|
| 50 | Short self-test routine
|
|---|
| 51 | recommended polling time: ( 1) minutes.
|
|---|
| 52 | Extended self-test routine
|
|---|
| 53 | recommended polling time: ( 5) minutes.
|
|---|
| 54 |
|
|---|
| 55 | SMART Attributes Data Structure revision number: 0
|
|---|
| 56 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 57 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 58 | 1 Raw_Read_Error_Rate -OSR-- 166 165 006 - 4
|
|---|
| 59 | 5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
|
|---|
| 60 | 9 Power_On_Hours -O--CK 071 071 000 - 26525
|
|---|
| 61 | 12 Power_Cycle_Count -O--CK 100 100 000 - 3488
|
|---|
| 62 | 171 Unknown_Attribute -O--CK 253 253 000 - 0
|
|---|
| 63 | 172 Unknown_Attribute -O--CK 253 253 000 - 0
|
|---|
| 64 | 181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
|
|---|
| 65 | 182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
|
|---|
| 66 | 194 Temperature_Celsius -O---- 031 000 000 - 31 (Min/Max 13/60)
|
|---|
| 67 | 201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
|
|---|
| 68 | 204 Soft_ECC_Correction -OSR-- 100 100 000 - 4
|
|---|
| 69 | 231 Temperature_Celsius PO--CK 024 024 010 - 77
|
|---|
| 70 | 234 Unknown_Attribute -O--CK 100 100 000 - 492868
|
|---|
| 71 | 241 Total_LBAs_Written -O--CK 100 100 000 - 28295
|
|---|
| 72 | 242 Total_LBAs_Read -O--CK 100 100 000 - 24663
|
|---|
| 73 | 250 Read_Error_Retry_Rate -O--CK 100 100 000 - 220821
|
|---|
| 74 | ||||||_ K auto-keep
|
|---|
| 75 | |||||__ C event count
|
|---|
| 76 | ||||___ R error rate
|
|---|
| 77 | |||____ S speed/performance
|
|---|
| 78 | ||_____ O updated online
|
|---|
| 79 | |______ P prefailure warning
|
|---|
| 80 |
|
|---|
| 81 | General Purpose Log Directory not supported
|
|---|
| 82 |
|
|---|
| 83 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 84 | Address Access R/W Size Description
|
|---|
| 85 | 0x00 SL R/O 1 Log Directory
|
|---|
| 86 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 87 | 0x02 SL R/O 4 Comprehensive SMART error log
|
|---|
| 88 | 0x03 SL R/O 5 Ext. Comprehensive SMART error log
|
|---|
| 89 | 0x04 SL R/O 8 Device Statistics log
|
|---|
| 90 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 91 |
|
|---|
| 92 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|---|
| 93 |
|
|---|
| 94 | SMART Error Log Version: 1
|
|---|
| 95 | Warning: ATA error count 65535 inconsistent with error log pointer 3
|
|---|
| 96 |
|
|---|
| 97 | ATA Error Count: 65535 (device log contains only the most recent five errors)
|
|---|
| 98 | CR = Command Register [HEX]
|
|---|
| 99 | FR = Features Register [HEX]
|
|---|
| 100 | SC = Sector Count Register [HEX]
|
|---|
| 101 | SN = Sector Number Register [HEX]
|
|---|
| 102 | CL = Cylinder Low Register [HEX]
|
|---|
| 103 | CH = Cylinder High Register [HEX]
|
|---|
| 104 | DH = Device/Head Register [HEX]
|
|---|
| 105 | DC = Device Command Register [HEX]
|
|---|
| 106 | ER = Error register [HEX]
|
|---|
| 107 | ST = Status register [HEX]
|
|---|
| 108 | Powered_Up_Time is measured from power on, and printed as
|
|---|
| 109 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|---|
| 110 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|---|
| 111 |
|
|---|
| 112 | Error 65535 occurred at disk power-on lifetime: 26522 hours (1105 days + 2 hours)
|
|---|
| 113 | When the command that caused the error occurred, the device was in an unknown state.
|
|---|
| 114 |
|
|---|
| 115 | After command completion occurred, registers were:
|
|---|
| 116 | ER ST SC SN CL CH DH
|
|---|
| 117 | -- -- -- -- -- -- --
|
|---|
| 118 | 04 51 fe 00 00 00 40 Error: ABRT
|
|---|
| 119 |
|
|---|
| 120 | Commands leading to the command that caused the error were:
|
|---|
| 121 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|---|
| 122 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
|---|
| 123 | ef 05 fe 00 00 00 40 40 00:00:30.950 SET FEATURES [Enable APM]
|
|---|
| 124 | 60 68 40 88 37 11 40 40 00:00:30.950 READ FPDMA QUEUED
|
|---|
| 125 | 60 80 08 00 37 11 40 40 00:00:30.950 READ FPDMA QUEUED
|
|---|
| 126 | 60 f8 38 00 36 11 40 40 00:00:30.950 READ FPDMA QUEUED
|
|---|
| 127 | 60 88 00 40 8e e6 40 40 00:00:30.950 READ FPDMA QUEUED
|
|---|
| 128 |
|
|---|
| 129 | Error 65534 occurred at disk power-on lifetime: 26522 hours (1105 days + 2 hours)
|
|---|
| 130 | When the command that caused the error occurred, the device was in an unknown state.
|
|---|
| 131 |
|
|---|
| 132 | After command completion occurred, registers were:
|
|---|
| 133 | ER ST SC SN CL CH DH
|
|---|
| 134 | -- -- -- -- -- -- --
|
|---|
| 135 | 04 51 fe 00 00 00 40 Error: ABRT
|
|---|
| 136 |
|
|---|
| 137 | Commands leading to the command that caused the error were:
|
|---|
| 138 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|---|
| 139 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
|---|
| 140 | ef 05 fe 00 00 00 40 40 00:00:30.910 SET FEATURES [Enable APM]
|
|---|
| 141 | 60 e0 00 20 7c 80 40 40 00:00:30.910 READ FPDMA QUEUED
|
|---|
| 142 | 60 f8 c0 08 1a 0e 40 40 00:00:30.910 READ FPDMA QUEUED
|
|---|
| 143 | 60 88 f8 18 7e 80 40 40 00:00:30.910 READ FPDMA QUEUED
|
|---|
| 144 | 60 f8 b8 08 19 0e 40 40 00:00:30.910 READ FPDMA QUEUED
|
|---|
| 145 |
|
|---|
| 146 | Error 65533 occurred at disk power-on lifetime: 26522 hours (1105 days + 2 hours)
|
|---|
| 147 | When the command that caused the error occurred, the device was in an unknown state.
|
|---|
| 148 |
|
|---|
| 149 | After command completion occurred, registers were:
|
|---|
| 150 | ER ST SC SN CL CH DH
|
|---|
| 151 | -- -- -- -- -- -- --
|
|---|
| 152 | 01 50 01 01 00 00 00
|
|---|
| 153 |
|
|---|
| 154 | Commands leading to the command that caused the error were:
|
|---|
| 155 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|---|
| 156 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
|---|
| 157 | 00 00 00 00 00 00 a0 a0 00:00:28.290 NOP [Abort queued commands]
|
|---|
| 158 | 00 00 00 00 00 00 a0 a0 00:00:28.300 NOP [Abort queued commands]
|
|---|
| 159 | 25 00 40 40 13 60 40 40 00:00:25.380 READ DMA EXT
|
|---|
| 160 | 25 00 40 00 13 60 40 40 00:00:25.380 READ DMA EXT
|
|---|
| 161 | 25 00 40 c0 12 60 40 40 00:00:25.380 READ DMA EXT
|
|---|
| 162 |
|
|---|
| 163 | Error 65532 occurred at disk power-on lifetime: 26522 hours (1105 days + 2 hours)
|
|---|
| 164 | When the command that caused the error occurred, the device was in an unknown state.
|
|---|
| 165 |
|
|---|
| 166 | After command completion occurred, registers were:
|
|---|
| 167 | ER ST SC SN CL CH DH
|
|---|
| 168 | -- -- -- -- -- -- --
|
|---|
| 169 | 00 00 00 00 00 00 00 at LBA = 0x00000000 = 0
|
|---|
| 170 |
|
|---|
| 171 | Commands leading to the command that caused the error were:
|
|---|
| 172 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|---|
| 173 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
|---|
| 174 | 25 00 40 40 13 60 40 40 00:00:25.380 READ DMA EXT
|
|---|
| 175 | 25 00 40 00 13 60 40 40 00:00:25.380 READ DMA EXT
|
|---|
| 176 | 25 00 40 c0 12 60 40 40 00:00:25.380 READ DMA EXT
|
|---|
| 177 | 25 00 40 80 12 60 40 40 00:00:25.380 READ DMA EXT
|
|---|
| 178 | 25 00 40 40 12 60 40 40 00:00:25.370 READ DMA EXT
|
|---|
| 179 |
|
|---|
| 180 | Error 65531 occurred at disk power-on lifetime: 26522 hours (1105 days + 2 hours)
|
|---|
| 181 | When the command that caused the error occurred, the device was in an unknown state.
|
|---|
| 182 |
|
|---|
| 183 | After command completion occurred, registers were:
|
|---|
| 184 | ER ST SC SN CL CH DH
|
|---|
| 185 | -- -- -- -- -- -- --
|
|---|
| 186 | 00 00 00 00 00 00 00 at LBA = 0x00000000 = 0
|
|---|
| 187 |
|
|---|
| 188 | Commands leading to the command that caused the error were:
|
|---|
| 189 | CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|---|
| 190 | -- -- -- -- -- -- -- -- ---------------- --------------------
|
|---|
| 191 | 25 00 40 40 13 60 40 40 00:00:25.380 READ DMA EXT
|
|---|
| 192 | 25 00 40 00 13 60 40 40 00:00:25.380 READ DMA EXT
|
|---|
| 193 | 25 00 40 c0 12 60 40 40 00:00:25.380 READ DMA EXT
|
|---|
| 194 | 25 00 40 80 12 60 40 40 00:00:25.380 READ DMA EXT
|
|---|
| 195 | 25 00 40 40 12 60 40 40 00:00:25.370 READ DMA EXT
|
|---|
| 196 |
|
|---|
| 197 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
|---|
| 198 |
|
|---|
| 199 | SMART Self-test log structure revision number 1
|
|---|
| 200 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 201 | # 1 Short offline Completed without error 00% 26438 -
|
|---|
| 202 | # 2 Extended offline Completed without error 00% 24217 -
|
|---|
| 203 | # 3 Short offline Completed without error 00% 24217 -
|
|---|
| 204 | # 4 Short offline Completed without error 00% 16024 -
|
|---|
| 205 | # 5 Short offline Completed without error 00% 15589 -
|
|---|
| 206 | # 6 Short offline Completed without error 00% 15358 -
|
|---|
| 207 | # 7 Short offline Completed without error 00% 14604 -
|
|---|
| 208 | # 8 Short offline Completed without error 00% 13630 -
|
|---|
| 209 | # 9 Short offline Completed without error 00% 12972 -
|
|---|
| 210 | #10 Short offline Completed without error 00% 11765 -
|
|---|
| 211 | #11 Short offline Completed without error 00% 11194 -
|
|---|
| 212 | #12 Short offline Completed without error 00% 10978 -
|
|---|
| 213 | #13 Short offline Completed without error 00% 10635 -
|
|---|
| 214 | #14 Short offline Completed without error 00% 10239 -
|
|---|
| 215 | #15 Short offline Completed without error 00% 9097 -
|
|---|
| 216 | #16 Short offline Completed without error 00% 8780 -
|
|---|
| 217 | #17 Short offline Completed without error 00% 4032 -
|
|---|
| 218 | #18 Short offline Completed without error 00% 2077 -
|
|---|
| 219 |
|
|---|
| 220 | Selective Self-tests/Logging not supported
|
|---|
| 221 |
|
|---|
| 222 | SCT Commands not supported
|
|---|
| 223 |
|
|---|
| 224 | Device Statistics (SMART Log 0x04)
|
|---|
| 225 | Page Offset Size Value Flags Description
|
|---|
| 226 | ATA_SMART_READ_LOG failed: scsi error badly formed scsi parameters
|
|---|
| 227 | Read Device Statistics pages 0x00-0x80 failed
|
|---|
| 228 |
|
|---|
| 229 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 230 |
|
|---|
| 231 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 232 | ID Size Value Description
|
|---|
| 233 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 234 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 235 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 236 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 237 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 238 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 239 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 240 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 241 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 242 | 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 243 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 244 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 245 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 246 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 247 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 248 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 249 |
|
|---|
