| 1 | smartctl 7.2 2020-12-30 r5155 [x86_64-linux-4.19.0-14-amd64] (local build) |
|---|
| 2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 3 | |
|---|
| 4 | === START OF INFORMATION SECTION === |
|---|
| 5 | Model Family: SandForce Driven SSDs |
|---|
| 6 | Device Model: SanDisk SDSSDA240G |
|---|
| 7 | Serial Number: 153229403488 |
|---|
| 8 | LU WWN Device Id: 5 001b44 eb8c42160 |
|---|
| 9 | Firmware Version: U21010RL |
|---|
| 10 | User Capacity: 240,057,409,536 bytes [240 GB] |
|---|
| 11 | Sector Size: 512 bytes logical/physical |
|---|
| 12 | Rotation Rate: Solid State Device |
|---|
| 13 | Form Factor: 2.5 inches |
|---|
| 14 | TRIM Command: Available |
|---|
| 15 | Device is: In smartctl database [for details use: -P show] |
|---|
| 16 | ATA Version is: ACS-2 T13/2015-D revision 3 |
|---|
| 17 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) |
|---|
| 18 | Local Time is: Tue Jun 29 22:48:37 2021 MSK |
|---|
| 19 | SMART support is: Available - device has SMART capability. |
|---|
| 20 | SMART support is: Enabled |
|---|
| 21 | AAM feature is: Unavailable |
|---|
| 22 | APM level is: 254 (maximum performance) |
|---|
| 23 | Rd look-ahead is: Disabled |
|---|
| 24 | Write cache is: Enabled |
|---|
| 25 | DSN feature is: Unavailable |
|---|
| 26 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
|---|
| 27 | Wt Cache Reorder: Unavailable |
|---|
| 28 | |
|---|
| 29 | === START OF READ SMART DATA SECTION === |
|---|
| 30 | SMART overall-health self-assessment test result: PASSED |
|---|
| 31 | |
|---|
| 32 | General SMART Values: |
|---|
| 33 | Offline data collection status: (0x02) Offline data collection activity |
|---|
| 34 | was completed without error. |
|---|
| 35 | Auto Offline Data Collection: Disabled. |
|---|
| 36 | Self-test execution status: ( 0) The previous self-test routine completed |
|---|
| 37 | without error or no self-test has ever |
|---|
| 38 | been run. |
|---|
| 39 | Total time to complete Offline |
|---|
| 40 | data collection: ( 0) seconds. |
|---|
| 41 | Offline data collection |
|---|
| 42 | capabilities: (0x71) SMART execute Offline immediate. |
|---|
| 43 | No Auto Offline data collection support. |
|---|
| 44 | Suspend Offline collection upon new |
|---|
| 45 | command. |
|---|
| 46 | No Offline surface scan supported. |
|---|
| 47 | Self-test supported. |
|---|
| 48 | Conveyance Self-test supported. |
|---|
| 49 | Selective Self-test supported. |
|---|
| 50 | SMART capabilities: (0x0002) Does not save SMART data before |
|---|
| 51 | entering power-saving mode. |
|---|
| 52 | Supports SMART auto save timer. |
|---|
| 53 | Error logging capability: (0x01) Error logging supported. |
|---|
| 54 | General Purpose Logging supported. |
|---|
| 55 | Short self-test routine |
|---|
| 56 | recommended polling time: ( 2) minutes. |
|---|
| 57 | Extended self-test routine |
|---|
| 58 | recommended polling time: ( 10) minutes. |
|---|
| 59 | Conveyance self-test routine |
|---|
| 60 | recommended polling time: ( 2) minutes. |
|---|
| 61 | |
|---|
| 62 | SMART Attributes Data Structure revision number: 1 |
|---|
| 63 | Vendor Specific SMART Attributes with Thresholds: |
|---|
| 64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
|---|
| 65 | 5 Retired_Block_Count -O--CK 100 100 000 - 0 |
|---|
| 66 | 9 Power_On_Hours_and_Msec -O--CK 218 100 000 - 10714h+00m+00.000s |
|---|
| 67 | 12 Power_Cycle_Count -O--CK 100 100 000 - 93 |
|---|
| 68 | 166 Unknown_Attribute -O--CK 100 100 000 - 5411 |
|---|
| 69 | 167 Unknown_Attribute -O--CK 100 100 000 - 0 |
|---|
| 70 | 168 Unknown_Attribute -O--CK 100 100 000 - 5490 |
|---|
| 71 | 169 Unknown_Attribute -O--CK 100 100 000 - 40 |
|---|
| 72 | 170 Reserve_Block_Count -O--CK 100 100 000 - 0 |
|---|
| 73 | 171 Program_Fail_Count -O--CK 100 100 000 - 0 |
|---|
| 74 | 172 Erase_Fail_Count -O--CK 100 100 000 - 0 |
|---|
| 75 | 173 Unknown_SandForce_Attr -O--CK 100 100 --- - 5456 |
|---|
| 76 | 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 74 |
|---|
| 77 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 |
|---|
| 78 | 194 Temperature_Celsius -O---K 072 100 000 - 28 (Min/Max 0/60) |
|---|
| 79 | 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 |
|---|
| 80 | 230 Life_Curve_Status -O--CK 100 100 000 - 182 |
|---|
| 81 | 232 Available_Reservd_Space PO--CK 100 100 004 - 100 |
|---|
| 82 | 233 SandForce_Internal -O--CK 100 100 000 - 1006062 |
|---|
| 83 | 241 Lifetime_Writes_GiB ----CK 253 253 000 - 151908 |
|---|
| 84 | 242 Lifetime_Reads_GiB ----CK 253 253 000 - 7921 |
|---|
| 85 | ||||||_ K auto-keep |
|---|
| 86 | |||||__ C event count |
|---|
| 87 | ||||___ R error rate |
|---|
| 88 | |||____ S speed/performance |
|---|
| 89 | ||_____ O updated online |
|---|
| 90 | |______ P prefailure warning |
|---|
| 91 | |
|---|
| 92 | General Purpose Log Directory Version 1 |
|---|
| 93 | SMART Log Directory Version 1 [multi-sector log support] |
|---|
| 94 | Address Access R/W Size Description |
|---|
| 95 | 0x00 GPL,SL R/O 1 Log Directory |
|---|
| 96 | 0x01 GPL,SL R/O 1 Summary SMART error log |
|---|
| 97 | 0x02 GPL,SL R/O 1 Comprehensive SMART error log |
|---|
| 98 | 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log |
|---|
| 99 | 0x04 GPL,SL R/O 8 Device Statistics log |
|---|
| 100 | 0x06 GPL,SL R/O 1 SMART self-test log |
|---|
| 101 | 0x07 GPL,SL R/O 1 Extended self-test log |
|---|
| 102 | 0x09 GPL,SL R/W 1 Selective self-test log |
|---|
| 103 | 0x10 GPL,SL R/O 1 NCQ Command Error log |
|---|
| 104 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log |
|---|
| 105 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
|---|
| 106 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
|---|
| 107 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
|---|
| 108 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
|---|
| 109 | |
|---|
| 110 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
|---|
| 111 | No Errors Logged |
|---|
| 112 | |
|---|
| 113 | SMART Extended Self-test Log Version: 1 (1 sectors) |
|---|
| 114 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
|---|
| 115 | # 1 Short offline Completed without error 00% 8906 - |
|---|
| 116 | |
|---|
| 117 | SMART Selective self-test log data structure revision number 1 |
|---|
| 118 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
|---|
| 119 | 1 0 0 Not_testing |
|---|
| 120 | 2 0 0 Not_testing |
|---|
| 121 | 3 0 0 Not_testing |
|---|
| 122 | 4 0 0 Not_testing |
|---|
| 123 | 5 0 0 Not_testing |
|---|
| 124 | Selective self-test flags (0x0): |
|---|
| 125 | After scanning selected spans, do NOT read-scan remainder of disk. |
|---|
| 126 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
|---|
| 127 | |
|---|
| 128 | SCT Commands not supported |
|---|
| 129 | |
|---|
| 130 | Device Statistics (GP Log 0x04) |
|---|
| 131 | Page Offset Size Value Flags Description |
|---|
| 132 | 0x01 ===== = = === == General Statistics (rev 2) == |
|---|
| 133 | 0x01 0x008 4 93 --- Lifetime Power-On Resets |
|---|
| 134 | 0x01 0x010 4 10714 --- Power-on Hours |
|---|
| 135 | 0x01 0x018 6 151908 --- Logical Sectors Written |
|---|
| 136 | 0x01 0x020 6 3865036545 --- Number of Write Commands |
|---|
| 137 | 0x01 0x028 6 7921 --- Logical Sectors Read |
|---|
| 138 | 0x01 0x030 6 190003296 --- Number of Read Commands |
|---|
| 139 | 0x02 ===== = = === == Free-Fall Statistics (empty) == |
|---|
| 140 | 0x03 ===== = = === == Rotating Media Statistics (empty) == |
|---|
| 141 | 0x04 ===== = = === == General Errors Statistics (rev 1) == |
|---|
| 142 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors |
|---|
| 143 | 0x04 0x010 4 74 --- Resets Between Cmd Acceptance and Completion |
|---|
| 144 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
|---|
| 145 | 0x05 0x008 1 28 --- Current Temperature |
|---|
| 146 | 0x05 0x010 1 -65 --- Average Short Term Temperature |
|---|
| 147 | 0x05 0x018 1 -79 --- Average Long Term Temperature |
|---|
| 148 | 0x05 0x020 1 60 --- Highest Temperature |
|---|
| 149 | 0x05 0x028 1 8 --- Lowest Temperature |
|---|
| 150 | 0x05 0x030 1 -1 --- Highest Average Short Term Temperature |
|---|
| 151 | 0x05 0x038 1 0 --- Lowest Average Short Term Temperature |
|---|
| 152 | 0x05 0x040 1 -1 --- Highest Average Long Term Temperature |
|---|
| 153 | 0x05 0x048 1 0 --- Lowest Average Long Term Temperature |
|---|
| 154 | 0x05 0x050 4 0 --- Time in Over-Temperature |
|---|
| 155 | 0x05 0x058 1 100 --- Specified Maximum Operating Temperature |
|---|
| 156 | 0x05 0x060 4 0 --- Time in Under-Temperature |
|---|
| 157 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature |
|---|
| 158 | 0x06 ===== = = === == Transport Statistics (rev 1) == |
|---|
| 159 | 0x06 0x008 4 12088 --- Number of Hardware Resets |
|---|
| 160 | 0x06 0x018 4 0 --- Number of Interface CRC Errors |
|---|
| 161 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
|---|
| 162 | 0x07 0x008 1 181 --- Percentage Used Endurance Indicator |
|---|
| 163 | |||_ C monitored condition met |
|---|
| 164 | ||__ D supports DSN |
|---|
| 165 | |___ N normalized value |
|---|
| 166 | |
|---|
| 167 | Pending Defects log (GP Log 0x0c) not supported |
|---|
| 168 | |
|---|
| 169 | SATA Phy Event Counters (GP Log 0x11) |
|---|
| 170 | ID Size Value Description |
|---|
| 171 | 0x0001 2 0 Command failed due to ICRC error |
|---|
| 172 | 0x0002 2 0 R_ERR response for data FIS |
|---|
| 173 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
|---|
| 174 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
|---|
| 175 | 0x0005 2 0 R_ERR response for non-data FIS |
|---|
| 176 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
|---|
| 177 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
|---|
| 178 | 0x0008 2 0 Device-to-host non-data FIS retries |
|---|
| 179 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy |
|---|
| 180 | 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET |
|---|
| 181 | 0x000b 2 0 CRC errors within host-to-device FIS |
|---|
| 182 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
|---|
| 183 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
|---|
| 184 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
|---|
| 185 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
|---|
| 186 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
|---|
| 187 | |
|---|
