| 1 | ATA device, with non-removable media
|
|---|
| 2 | Model Number: WDC WD80EFAX-68KNBN0
|
|---|
| 3 | Serial Number: [...]
|
|---|
| 4 | Firmware Revision: 81.00A81
|
|---|
| 5 | Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0; Revision: ATA8-AST T13 Project D1697 Revision 0b
|
|---|
| 6 | Standards:
|
|---|
| 7 | Used: unknown (minor revision code 0x0029)
|
|---|
| 8 | Supported: 9 8 7 6 5
|
|---|
| 9 | Likely used: 9
|
|---|
| 10 | Configuration:
|
|---|
| 11 | Logical max current
|
|---|
| 12 | cylinders 16383 16383
|
|---|
| 13 | heads 16 16
|
|---|
| 14 | sectors/track 63 63
|
|---|
| 15 | --
|
|---|
| 16 | CHS current addressable sectors: 16514064
|
|---|
| 17 | LBA user addressable sectors: 268435455
|
|---|
| 18 | LBA48 user addressable sectors: 15628053168
|
|---|
| 19 | Logical Sector size: 512 bytes
|
|---|
| 20 | Physical Sector size: 4096 bytes
|
|---|
| 21 | Logical Sector-0 offset: 0 bytes
|
|---|
| 22 | device size with M = 1024*1024: 7630885 MBytes
|
|---|
| 23 | device size with M = 1000*1000: 8001563 MBytes (8001 GB)
|
|---|
| 24 | cache/buffer size = unknown
|
|---|
| 25 | Form Factor: 3.5 inch
|
|---|
| 26 | Nominal Media Rotation Rate: 5400
|
|---|
| 27 | Capabilities:
|
|---|
| 28 | LBA, IORDY(can be disabled)
|
|---|
| 29 | Queue depth: 32
|
|---|
| 30 | Standby timer values: spec'd by Standard, no device specific minimum
|
|---|
| 31 | R/W multiple sector transfer: Max = 16 Current = 0
|
|---|
| 32 | Advanced power management level: 254
|
|---|
| 33 | DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
|
|---|
| 34 | Cycle time: min=120ns recommended=120ns
|
|---|
| 35 | PIO: pio0 pio1 pio2 pio3 pio4
|
|---|
| 36 | Cycle time: no flow control=120ns IORDY flow control=120ns
|
|---|
| 37 | Commands/features:
|
|---|
| 38 | Enabled Supported:
|
|---|
| 39 | * SMART feature set
|
|---|
| 40 | Security Mode feature set
|
|---|
| 41 | * Power Management feature set
|
|---|
| 42 | * Write cache
|
|---|
| 43 | * Look-ahead
|
|---|
| 44 | * Host Protected Area feature set
|
|---|
| 45 | * WRITE_BUFFER command
|
|---|
| 46 | * READ_BUFFER command
|
|---|
| 47 | * NOP cmd
|
|---|
| 48 | * DOWNLOAD_MICROCODE
|
|---|
| 49 | * Advanced Power Management feature set
|
|---|
| 50 | Power-Up In Standby feature set
|
|---|
| 51 | * SET_FEATURES required to spinup after power up
|
|---|
| 52 | SET_MAX security extension
|
|---|
| 53 | * 48-bit Address feature set
|
|---|
| 54 | * Device Configuration Overlay feature set
|
|---|
| 55 | * Mandatory FLUSH_CACHE
|
|---|
| 56 | * FLUSH_CACHE_EXT
|
|---|
| 57 | * SMART error logging
|
|---|
| 58 | * SMART self-test
|
|---|
| 59 | * Media Card Pass-Through
|
|---|
| 60 | * General Purpose Logging feature set
|
|---|
| 61 | * WRITE_{DMA|MULTIPLE}_FUA_EXT
|
|---|
| 62 | * 64-bit World wide name
|
|---|
| 63 | * URG for READ_STREAM[_DMA]_EXT
|
|---|
| 64 | * URG for WRITE_STREAM[_DMA]_EXT
|
|---|
| 65 | * WRITE_UNCORRECTABLE_EXT command
|
|---|
| 66 | * {READ,WRITE}_DMA_EXT_GPL commands
|
|---|
| 67 | * Segmented DOWNLOAD_MICROCODE
|
|---|
| 68 | unknown 119[6]
|
|---|
| 69 | unknown 119[7]
|
|---|
| 70 | * Gen1 signaling speed (1.5Gb/s)
|
|---|
| 71 | * Gen2 signaling speed (3.0Gb/s)
|
|---|
| 72 | * Gen3 signaling speed (6.0Gb/s)
|
|---|
| 73 | * Native Command Queueing (NCQ)
|
|---|
| 74 | * Host-initiated interface power management
|
|---|
| 75 | * Phy event counters
|
|---|
| 76 | * NCQ priority information
|
|---|
| 77 | * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
|
|---|
| 78 | Non-Zero buffer offsets in DMA Setup FIS
|
|---|
| 79 | * DMA Setup Auto-Activate optimization
|
|---|
| 80 | Device-initiated interface power management
|
|---|
| 81 | In-order data delivery
|
|---|
| 82 | * Software settings preservation
|
|---|
| 83 | unknown 78[7]
|
|---|
| 84 | unknown 78[10]
|
|---|
| 85 | unknown 78[11]
|
|---|
| 86 | * SMART Command Transport (SCT) feature set
|
|---|
| 87 | * SCT Write Same (AC2)
|
|---|
| 88 | * SCT Error Recovery Control (AC3)
|
|---|
| 89 | * SCT Features Control (AC4)
|
|---|
| 90 | * SCT Data Tables (AC5)
|
|---|
| 91 | * SANITIZE feature set
|
|---|
| 92 | * OVERWRITE_EXT command
|
|---|
| 93 | * reserved 69[3]
|
|---|
| 94 | * DOWNLOAD MICROCODE DMA command
|
|---|
| 95 | * WRITE BUFFER DMA command
|
|---|
| 96 | * READ BUFFER DMA command
|
|---|
| 97 | Security:
|
|---|
| 98 | Master password revision code = 65534
|
|---|
| 99 | supported
|
|---|
| 100 | not enabled
|
|---|
| 101 | not locked
|
|---|
| 102 | not frozen
|
|---|
| 103 | not expired: security count
|
|---|
| 104 | not supported: enhanced erase
|
|---|
| 105 | 810min for SECURITY ERASE UNIT.
|
|---|
| 106 | Logical Unit WWN Device Identifier: 5000cca099dec5de
|
|---|
| 107 | NAA : 5
|
|---|
| 108 | IEEE OUI : 000cca
|
|---|
| 109 | Unique ID : 099dec5de
|
|---|
| 110 | Checksum: correct
|
|---|
