Ticket #1287: smartctl-WESTERN_DIGITAL-WD8004FRYZ.txt

File smartctl-WESTERN_DIGITAL-WD8004FRYZ.txt, 8.4 KB (added by Cmdr_Zod, 5 years ago)
Line 
1smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-1062.9.1.el7.x86_64] (local build)
2Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: WDC WD8004FRYZ-01VAEB0
6Firmware Version: 01.01H01
7User Capacity: 8,001,563,222,016 bytes [8.00 TB]
8Sector Sizes: 512 bytes logical, 4096 bytes physical
9Rotation Rate: 7200 rpm
10Form Factor: 3.5 inches
11Device is: Not in smartctl database [for details use: -P showall]
12ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
13SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
14Local Time is: Fri Jan 17 09:04:34 2020 CET
15SMART support is: Available - device has SMART capability.
16SMART support is: Enabled
17AAM feature is: Unavailable
18APM feature is: Disabled
19Rd look-ahead is: Enabled
20Write cache is: Enabled
21ATA Security is: Disabled, frozen [SEC2]
22Wt Cache Reorder: Enabled
23
24=== START OF READ SMART DATA SECTION ===
25SMART overall-health self-assessment test result: PASSED
26
27General SMART Values:
28Offline data collection status: (0x82) Offline data collection activity
29 was completed without error.
30 Auto Offline Data Collection: Enabled.
31Self-test execution status: ( 0) The previous self-test routine completed
32 without error or no self-test has ever
33 been run.
34Total time to complete Offline
35data collection: ( 87) seconds.
36Offline data collection
37capabilities: (0x5b) SMART execute Offline immediate.
38 Auto Offline data collection on/off support.
39 Suspend Offline collection upon new
40 command.
41 Offline surface scan supported.
42 Self-test supported.
43 No Conveyance Self-test supported.
44 Selective Self-test supported.
45SMART capabilities: (0x0003) Saves SMART data before entering
46 power-saving mode.
47 Supports SMART auto save timer.
48Error logging capability: (0x01) Error logging supported.
49 General Purpose Logging supported.
50Short self-test routine
51recommended polling time: ( 2) minutes.
52Extended self-test routine
53recommended polling time: ( 829) minutes.
54SCT capabilities: (0x003d) SCT Status supported.
55 SCT Error Recovery Control supported.
56 SCT Feature Control supported.
57 SCT Data Table supported.
58
59SMART Attributes Data Structure revision number: 16
60Vendor Specific SMART Attributes with Thresholds:
61ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
62 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
63 2 Throughput_Performance P-S--- 133 133 054 - 92
64 3 Spin_Up_Time POS--- 100 100 024 - 0
65 4 Start_Stop_Count -O--C- 100 100 000 - 3
66 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
67 7 Seek_Error_Rate PO-R-- 100 100 067 - 0
68 8 Seek_Time_Performance P-S--- 128 128 020 - 18
69 9 Power_On_Hours -O--C- 100 100 000 - 238
70 10 Spin_Retry_Count PO--C- 100 100 060 - 0
71 12 Power_Cycle_Count -O--CK 100 100 000 - 3
72192 Power-Off_Retract_Count -O--CK 100 100 000 - 14
73193 Load_Cycle_Count -O--C- 100 100 000 - 14
74194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 21/48)
75196 Reallocated_Event_Count -O--CK 100 100 000 - 0
76197 Current_Pending_Sector -O---K 100 100 000 - 0
77198 Offline_Uncorrectable ---R-- 100 100 000 - 0
78199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
79 ||||||_ K auto-keep
80 |||||__ C event count
81 ||||___ R error rate
82 |||____ S speed/performance
83 ||_____ O updated online
84 |______ P prefailure warning
85
86General Purpose Log Directory Version 1
87SMART Log Directory Version 1 [multi-sector log support]
88Address Access R/W Size Description
890x00 GPL,SL R/O 1 Log Directory
900x01 SL R/O 1 Summary SMART error log
910x02 SL R/O 1 Comprehensive SMART error log
920x03 GPL R/O 1 Ext. Comprehensive SMART error log
930x04 GPL R/O 256 Device Statistics log
940x04 SL R/O 255 Device Statistics log
950x06 SL R/O 1 SMART self-test log
960x07 GPL R/O 1 Extended self-test log
970x08 GPL R/O 2 Power Conditions log
980x09 SL R/W 1 Selective self-test log
990x0c GPL R/O 5501 Pending Defects log
1000x10 GPL R/O 1 SATA NCQ Queued Error log
1010x11 GPL R/O 1 SATA Phy Event Counters log
1020x12 GPL R/O 1 SATA NCQ NON-DATA log
1030x13 GPL R/O 1 SATA NCQ Send and Receive log
1040x15 GPL R/W 1 SATA Rebuild Assist log
1050x21 GPL R/O 1 Write stream error log
1060x22 GPL R/O 1 Read stream error log
1070x24 GPL R/O 256 Current Device Internal Status Data log
1080x25 GPL R/O 256 Saved Device Internal Status Data log
1090x2f GPL - 1 Reserved
1100x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1110x80-0x9f GPL,SL R/W 16 Host vendor specific log
1120xe0 GPL,SL R/W 1 SCT Command/Status
1130xe1 GPL,SL R/W 1 SCT Data Transfer
114
115SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
116No Errors Logged
117
118SMART Extended Self-test Log Version: 1 (1 sectors)
119Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
120# 1 Short offline Completed without error 00% 216 -
121
122SMART Selective self-test log data structure revision number 1
123 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
124 1 0 0 Not_testing
125 2 0 0 Not_testing
126 3 0 0 Not_testing
127 4 0 0 Not_testing
128 5 0 0 Not_testing
129Selective self-test flags (0x0):
130 After scanning selected spans, do NOT read-scan remainder of disk.
131If Selective self-test is pending on power-up, resume after 0 minute delay.
132
133SCT Status Version: 3
134SCT Version (vendor specific): 256 (0x0100)
135SCT Support Level: 0
136Device State: Active (0)
137Current Temperature: 38 Celsius
138Power Cycle Min/Max Temperature: 38/44 Celsius
139Lifetime Min/Max Temperature: 21/48 Celsius
140Under/Over Temperature Limit Count: 0/0
141
142SCT Temperature History Version: 2
143Temperature Sampling Period: 1 minute
144Temperature Logging Interval: 1 minute
145Min/Max recommended Temperature: 0/60 Celsius
146Min/Max Temperature Limit: -40/70 Celsius
147Temperature History Size (Index): 128 (76)
148
149Index Estimated Time Temperature Celsius
150 77 2020-01-17 06:57 38 *******************
151 ... ..(126 skipped). .. *******************
152 76 2020-01-17 09:04 38 *******************
153
154SCT Error Recovery Control:
155 Read: Disabled
156 Write: Disabled
157
158Device Statistics (GP/SMART Log 0x04) not supported
159
160SATA Phy Event Counters (GP Log 0x11)
161ID Size Value Description
1620x0001 2 0 Command failed due to ICRC error
1630x0002 2 0 R_ERR response for data FIS
1640x0003 2 0 R_ERR response for device-to-host data FIS
1650x0004 2 0 R_ERR response for host-to-device data FIS
1660x0005 2 0 R_ERR response for non-data FIS
1670x0006 2 0 R_ERR response for device-to-host non-data FIS
1680x0007 2 0 R_ERR response for host-to-device non-data FIS
1690x0008 2 0 Device-to-host non-data FIS retries
1700x0009 2 65535+ Transition from drive PhyRdy to drive PhyNRdy
1710x000a 2 3 Device-to-host register FISes sent due to a COMRESET
1720x000b 2 0 CRC errors within host-to-device FIS
1730x000d 2 0 Non-CRC errors within host-to-device FIS
174