Ticket #1274: smartctl-WD-WD60EFAX.txt

File smartctl-WD-WD60EFAX.txt, 9.6 KB (added by Ingo, 5 years ago)

Output of smartctl -q noserial -x /dev/sda

Line 
1smartctl 6.5 (build date Apr 2 2019) [x86_64-linux-4.4.59+] (local build)
2Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: WDC WD60EFAX-68SHWN0
6Firmware Version: 82.00A82
7User Capacity: 6,001,175,126,016 bytes [6.00 TB]
8Sector Sizes: 512 bytes logical, 4096 bytes physical
9Rotation Rate: 5400 rpm
10Form Factor: 3.5 inches
11Device is: Not in smartctl database [for details use: -P showall]
12ATA Version is: ACS-3 T13/2161-D revision 5
13SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
14Local Time is: Sat Dec 21 22:34:27 2019 CET
15SMART support is: Available - device has SMART capability.
16SMART support is: Enabled
17AAM feature is: Unavailable
18APM feature is: Unavailable
19Rd look-ahead is: Enabled
20Write cache is: Enabled
21ATA Security is: Disabled, NOT FROZEN [SEC1]
22Wt Cache Reorder: Enabled
23
24=== START OF READ SMART DATA SECTION ===
25SMART overall-health self-assessment test result: PASSED
26
27General SMART Values:
28Offline data collection status: (0x00) Offline data collection activity
29 was never started.
30 Auto Offline Data Collection: Disabled.
31Self-test execution status: ( 0) The previous self-test routine completed
32 without error or no self-test has ever
33 been run.
34Total time to complete Offline
35data collection: (38760) seconds.
36Offline data collection
37capabilities: (0x7b) SMART execute Offline immediate.
38 Auto Offline data collection on/off support.
39 Suspend Offline collection upon new
40 command.
41 Offline surface scan supported.
42 Self-test supported.
43 Conveyance Self-test supported.
44 Selective Self-test supported.
45SMART capabilities: (0x0003) Saves SMART data before entering
46 power-saving mode.
47 Supports SMART auto save timer.
48Error logging capability: (0x01) Error logging supported.
49 General Purpose Logging supported.
50Short self-test routine
51recommended polling time: ( 2) minutes.
52Extended self-test routine
53recommended polling time: ( 337) minutes.
54Conveyance self-test routine
55recommended polling time: ( 2) minutes.
56SCT capabilities: (0x303d) SCT Status supported.
57 SCT Error Recovery Control supported.
58 SCT Feature Control supported.
59 SCT Data Table supported.
60
61SMART Attributes Data Structure revision number: 16
62Vendor Specific SMART Attributes with Thresholds:
63ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
64 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
65 3 Spin_Up_Time POS--K 227 227 021 - 3633
66 4 Start_Stop_Count -O--CK 100 100 000 - 42
67 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
68 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
69 9 Power_On_Hours -O--CK 095 095 000 - 4242
70 10 Spin_Retry_Count -O--CK 100 253 000 - 0
71 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
72 12 Power_Cycle_Count -O--CK 100 100 000 - 42
73192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
74193 Load_Cycle_Count -O--CK 200 200 000 - 42
75194 Temperature_Celsius -O---K 114 110 000 - 36
76196 Reallocated_Event_Count -O--CK 200 200 000 - 0
77197 Current_Pending_Sector -O--CK 200 200 000 - 0
78198 Offline_Uncorrectable ----CK 100 253 000 - 0
79199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
80200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
81 ||||||_ K auto-keep
82 |||||__ C event count
83 ||||___ R error rate
84 |||____ S speed/performance
85 ||_____ O updated online
86 |______ P prefailure warning
87
88General Purpose Log Directory Version 1
89SMART Log Directory Version 1 [multi-sector log support]
90Address Access R/W Size Description
910x00 GPL,SL R/O 1 Log Directory
920x01 SL R/O 1 Summary SMART error log
930x02 SL R/O 5 Comprehensive SMART error log
940x03 GPL R/O 6 Ext. Comprehensive SMART error log
950x04 GPL R/O 256 Device Statistics log
960x04 SL R/O 8 Device Statistics log
970x06 SL R/O 1 SMART self-test log
980x07 GPL R/O 1 Extended self-test log
990x09 SL R/W 1 Selective self-test log
1000x0c GPL R/O 2048 Pending Defects log
1010x10 GPL R/O 1 SATA NCQ Queued Error log
1020x11 GPL R/O 1 SATA Phy Event Counters log
1030x24 GPL R/O 291 Current Device Internal Status Data log
1040x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1050x80-0x9f GPL,SL R/W 16 Host vendor specific log
1060xa0-0xa7 GPL,SL VS 16 Device vendor specific log
1070xa8-0xb6 GPL,SL VS 1 Device vendor specific log
1080xb7 GPL,SL VS 78 Device vendor specific log
1090xb9 GPL,SL VS 4 Device vendor specific log
1100xbd GPL,SL VS 1 Device vendor specific log
1110xc0 GPL,SL VS 1 Device vendor specific log
1120xc1 GPL VS 93 Device vendor specific log
1130xe0 GPL,SL R/W 1 SCT Command/Status
1140xe1 GPL,SL R/W 1 SCT Data Transfer
115
116SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
117No Errors Logged
118
119SMART Extended Self-test Log Version: 1 (1 sectors)
120Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
121# 1 Short offline Completed without error 00% 4242 -
122# 2 Short offline Completed without error 00% 3645 -
123# 3 Short offline Completed without error 00% 2900 -
124# 4 Short offline Completed without error 00% 2181 -
125# 5 Short offline Completed without error 00% 1438 -
126# 6 Short offline Completed without error 00% 1335 -
127# 7 Short offline Completed without error 00% 695 -
128
129SMART Selective self-test log data structure revision number 1
130 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
131 1 0 0 Not_testing
132 2 0 0 Not_testing
133 3 0 0 Not_testing
134 4 0 0 Not_testing
135 5 0 0 Not_testing
136Selective self-test flags (0x0):
137 After scanning selected spans, do NOT read-scan remainder of disk.
138If Selective self-test is pending on power-up, resume after 0 minute delay.
139
140SCT Status Version: 3
141SCT Version (vendor specific): 258 (0x0102)
142SCT Support Level: 1
143Device State: Active (0)
144Current Temperature: 36 Celsius
145Power Cycle Min/Max Temperature: 33/36 Celsius
146Lifetime Min/Max Temperature: 24/40 Celsius
147Under/Over Temperature Limit Count: 0/0
148Vendor specific:
14901 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
15000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
151
152SCT Temperature History Version: 2
153Temperature Sampling Period: 1 minute
154Temperature Logging Interval: 1 minute
155Min/Max recommended Temperature: 0/65 Celsius
156Min/Max Temperature Limit: -41/85 Celsius
157Temperature History Size (Index): 478 (127)
158
159Index Estimated Time Temperature Celsius
160 128 2019-12-21 14:37 36 *****************
161 ... ..(148 skipped). .. *****************
162 277 2019-12-21 17:06 36 *****************
163 278 2019-12-21 17:07 35 ****************
164 ... ..( 15 skipped). .. ****************
165 294 2019-12-21 17:23 35 ****************
166 295 2019-12-21 17:24 36 *****************
167 ... ..(309 skipped). .. *****************
168 127 2019-12-21 22:34 36 *****************
169
170SCT Error Recovery Control:
171 Read: 70 (7.0 seconds)
172 Write: 70 (7.0 seconds)
173
174Device Statistics (GP/SMART Log 0x04) not supported
175
176SATA Phy Event Counters (GP Log 0x11)
177ID Size Value Description
1780x0001 2 0 Command failed due to ICRC error
1790x0002 2 0 R_ERR response for data FIS
1800x0003 2 0 R_ERR response for device-to-host data FIS
1810x0004 2 0 R_ERR response for host-to-device data FIS
1820x0005 2 0 R_ERR response for non-data FIS
1830x0006 2 0 R_ERR response for device-to-host non-data FIS
1840x0007 2 0 R_ERR response for host-to-device non-data FIS
1850x0008 2 0 Device-to-host non-data FIS retries
1860x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
1870x000a 2 1 Device-to-host register FISes sent due to a COMRESET
1880x000b 2 0 CRC errors within host-to-device FIS
1890x000d 2 0 Non-CRC errors within host-to-device FIS
1900x000f 2 0 R_ERR response for host-to-device data FIS, CRC
1910x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
1920x8000 4 498297 Vendor specific
193