| 1 | smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-1062.4.3.el7.x86_64] (local build) |
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 3 | |
|---|
| 4 | === START OF INFORMATION SECTION === |
|---|
| 5 | Device Model: ST12000NM0008-2H3101 |
|---|
| 6 | Firmware Version: SN02 |
|---|
| 7 | User Capacity: 12,000,138,625,024 bytes [12.0 TB] |
|---|
| 8 | Sector Sizes: 512 bytes logical, 4096 bytes physical |
|---|
| 9 | Rotation Rate: 7200 rpm |
|---|
| 10 | Form Factor: 3.5 inches |
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall] |
|---|
| 12 | ATA Version is: Unknown(0x0fe0), ACS-4 T13/BSR INCITS 529 revision 5 |
|---|
| 13 | SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 3.0 Gb/s) |
|---|
| 14 | Local Time is: Mon Nov 25 10:20:01 2019 CET |
|---|
| 15 | SMART support is: Available - device has SMART capability. |
|---|
| 16 | SMART support is: Enabled |
|---|
| 17 | AAM feature is: Unavailable |
|---|
| 18 | APM feature is: Unavailable |
|---|
| 19 | Rd look-ahead is: Enabled |
|---|
| 20 | Write cache is: Enabled |
|---|
| 21 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
|---|
| 22 | Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters |
|---|
| 23 | Wt Cache Reorder: Unknown (SCT Feature Control command failed) |
|---|
| 24 | |
|---|
| 25 | === START OF READ SMART DATA SECTION === |
|---|
| 26 | SMART overall-health self-assessment test result: PASSED |
|---|
| 27 | |
|---|
| 28 | General SMART Values: |
|---|
| 29 | Offline data collection status: (0x82) Offline data collection activity |
|---|
| 30 | was completed without error. |
|---|
| 31 | Auto Offline Data Collection: Enabled. |
|---|
| 32 | Self-test execution status: ( 0) The previous self-test routine completed |
|---|
| 33 | without error or no self-test has ever |
|---|
| 34 | been run. |
|---|
| 35 | Total time to complete Offline |
|---|
| 36 | data collection: ( 584) seconds. |
|---|
| 37 | Offline data collection |
|---|
| 38 | capabilities: (0x7b) SMART execute Offline immediate. |
|---|
| 39 | Auto Offline data collection on/off support. |
|---|
| 40 | Suspend Offline collection upon new |
|---|
| 41 | command. |
|---|
| 42 | Offline surface scan supported. |
|---|
| 43 | Self-test supported. |
|---|
| 44 | Conveyance Self-test supported. |
|---|
| 45 | Selective Self-test supported. |
|---|
| 46 | SMART capabilities: (0x0003) Saves SMART data before entering |
|---|
| 47 | power-saving mode. |
|---|
| 48 | Supports SMART auto save timer. |
|---|
| 49 | Error logging capability: (0x01) Error logging supported. |
|---|
| 50 | General Purpose Logging supported. |
|---|
| 51 | Short self-test routine |
|---|
| 52 | recommended polling time: ( 1) minutes. |
|---|
| 53 | Extended self-test routine |
|---|
| 54 | recommended polling time: (1245) minutes. |
|---|
| 55 | Conveyance self-test routine |
|---|
| 56 | recommended polling time: ( 2) minutes. |
|---|
| 57 | SCT capabilities: (0x70bd) SCT Status supported. |
|---|
| 58 | SCT Error Recovery Control supported. |
|---|
| 59 | SCT Feature Control supported. |
|---|
| 60 | SCT Data Table supported. |
|---|
| 61 | |
|---|
| 62 | SMART Attributes Data Structure revision number: 10 |
|---|
| 63 | Vendor Specific SMART Attributes with Thresholds: |
|---|
| 64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
|---|
| 65 | 1 Raw_Read_Error_Rate POSR-- 083 064 044 - 215776226 |
|---|
| 66 | 3 Spin_Up_Time PO---- 096 096 000 - 0 |
|---|
| 67 | 4 Start_Stop_Count -O--CK 100 100 020 - 3 |
|---|
| 68 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 |
|---|
| 69 | 7 Seek_Error_Rate POSR-- 069 060 045 - 7704599 |
|---|
| 70 | 9 Power_On_Hours -O--CK 100 100 000 - 65 |
|---|
| 71 | 10 Spin_Retry_Count PO--C- 100 100 097 - 0 |
|---|
| 72 | 12 Power_Cycle_Count -O--CK 100 100 020 - 3 |
|---|
| 73 | 18 Unknown_Attribute PO-R-- 100 100 050 - 0 |
|---|
| 74 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 |
|---|
| 75 | 188 Command_Timeout -O--CK 100 100 000 - 0 |
|---|
| 76 | 190 Airflow_Temperature_Cel -O---K 069 066 040 - 31 (Min/Max 24/34) |
|---|
| 77 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 |
|---|
| 78 | 193 Load_Cycle_Count -O--CK 100 100 000 - 48 |
|---|
| 79 | 194 Temperature_Celsius -O---K 031 040 000 - 31 (0 22 0 0 0) |
|---|
| 80 | 195 Hardware_ECC_Recovered -O-RC- 009 009 000 - 215776226 |
|---|
| 81 | 197 Current_Pending_Sector -O--C- 100 100 000 - 0 |
|---|
| 82 | 198 Offline_Uncorrectable ----C- 100 100 000 - 0 |
|---|
| 83 | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 |
|---|
| 84 | 200 Multi_Zone_Error_Rate PO---K 100 100 001 - 0 |
|---|
| 85 | 240 Head_Flying_Hours ------ 100 253 000 - 31 (6 40 0) |
|---|
| 86 | 241 Total_LBAs_Written ------ 100 253 000 - 4518494 |
|---|
| 87 | 242 Total_LBAs_Read ------ 100 253 000 - 23437589050 |
|---|
| 88 | ||||||_ K auto-keep |
|---|
| 89 | |||||__ C event count |
|---|
| 90 | ||||___ R error rate |
|---|
| 91 | |||____ S speed/performance |
|---|
| 92 | ||_____ O updated online |
|---|
| 93 | |______ P prefailure warning |
|---|
| 94 | |
|---|
| 95 | General Purpose Log Directory Version 1 |
|---|
| 96 | SMART Log Directory Version 1 [multi-sector log support] |
|---|
| 97 | Address Access R/W Size Description |
|---|
| 98 | 0x00 GPL,SL R/O 1 Log Directory |
|---|
| 99 | 0x01 SL R/O 1 Summary SMART error log |
|---|
| 100 | 0x02 SL R/O 5 Comprehensive SMART error log |
|---|
| 101 | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log |
|---|
| 102 | 0x04 GPL R/O 256 Device Statistics log |
|---|
| 103 | 0x04 SL R/O 8 Device Statistics log |
|---|
| 104 | 0x06 SL R/O 1 SMART self-test log |
|---|
| 105 | 0x07 GPL R/O 1 Extended self-test log |
|---|
| 106 | 0x08 GPL R/O 2 Power Conditions log |
|---|
| 107 | 0x09 SL R/W 1 Selective self-test log |
|---|
| 108 | 0x0a GPL R/W 8 Device Statistics Notification |
|---|
| 109 | 0x0c GPL R/O 2048 Pending Defects log |
|---|
| 110 | 0x10 GPL R/O 1 SATA NCQ Queued Error log |
|---|
| 111 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
|---|
| 112 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log |
|---|
| 113 | 0x15 GPL R/W 1 SATA Rebuild Assist log |
|---|
| 114 | 0x21 GPL R/O 1 Write stream error log |
|---|
| 115 | 0x22 GPL R/O 1 Read stream error log |
|---|
| 116 | 0x24 GPL R/O 768 Current Device Internal Status Data log |
|---|
| 117 | 0x2f GPL - 1 Reserved |
|---|
| 118 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
|---|
| 119 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
|---|
| 120 | 0xa1 GPL,SL VS 24 Device vendor specific log |
|---|
| 121 | 0xa2 GPL VS 16320 Device vendor specific log |
|---|
| 122 | 0xa4 GPL,SL VS 160 Device vendor specific log |
|---|
| 123 | 0xa6 GPL VS 192 Device vendor specific log |
|---|
| 124 | 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log |
|---|
| 125 | 0xab GPL VS 1 Device vendor specific log |
|---|
| 126 | 0xad GPL VS 16 Device vendor specific log |
|---|
| 127 | 0xbe-0xbf GPL VS 65535 Device vendor specific log |
|---|
| 128 | 0xc1 GPL,SL VS 8 Device vendor specific log |
|---|
| 129 | 0xc3 GPL,SL VS 32 Device vendor specific log |
|---|
| 130 | 0xc9 GPL,SL VS 8 Device vendor specific log |
|---|
| 131 | 0xca GPL,SL VS 16 Device vendor specific log |
|---|
| 132 | 0xd1 GPL VS 336 Device vendor specific log |
|---|
| 133 | 0xd2 GPL VS 10000 Device vendor specific log |
|---|
| 134 | 0xd4 GPL VS 2048 Device vendor specific log |
|---|
| 135 | 0xda GPL,SL VS 1 Device vendor specific log |
|---|
| 136 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
|---|
| 137 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
|---|
| 138 | |
|---|
| 139 | SMART Extended Comprehensive Error Log Version: 1 (5 sectors) |
|---|
| 140 | No Errors Logged |
|---|
| 141 | |
|---|
| 142 | SMART Extended Self-test Log Version: 1 (1 sectors) |
|---|
| 143 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
|---|
| 144 | # 1 Short offline Completed without error 00% 65 - |
|---|
| 145 | |
|---|
| 146 | SMART Selective self-test log data structure revision number 1 |
|---|
| 147 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
|---|
| 148 | 1 0 0 Not_testing |
|---|
| 149 | 2 0 0 Not_testing |
|---|
| 150 | 3 0 0 Not_testing |
|---|
| 151 | 4 0 0 Not_testing |
|---|
| 152 | 5 0 0 Not_testing |
|---|
| 153 | Selective self-test flags (0x0): |
|---|
| 154 | After scanning selected spans, do NOT read-scan remainder of disk. |
|---|
| 155 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
|---|
| 156 | |
|---|
| 157 | SCT Status Version: 3 |
|---|
| 158 | SCT Version (vendor specific): 522 (0x020a) |
|---|
| 159 | SCT Support Level: 1 |
|---|
| 160 | Device State: Active (0) |
|---|
| 161 | Current Temperature: 31 Celsius |
|---|
| 162 | Power Cycle Min/Max Temperature: 24/34 Celsius |
|---|
| 163 | Lifetime Min/Max Temperature: 22/34 Celsius |
|---|
| 164 | Under/Over Temperature Limit Count: 0/0 |
|---|
| 165 | |
|---|
| 166 | SCT Temperature History Version: 2 |
|---|
| 167 | Temperature Sampling Period: 3 minutes |
|---|
| 168 | Temperature Logging Interval: 59 minutes |
|---|
| 169 | Min/Max recommended Temperature: 10/40 Celsius |
|---|
| 170 | Min/Max Temperature Limit: 5/60 Celsius |
|---|
| 171 | Temperature History Size (Index): 128 (71) |
|---|
| 172 | |
|---|
| 173 | Index Estimated Time Temperature Celsius |
|---|
| 174 | 72 2019-11-20 05:24 ? - |
|---|
| 175 | ... ..( 54 skipped). .. - |
|---|
| 176 | 127 2019-11-22 11:29 ? - |
|---|
| 177 | 0 2019-11-22 12:28 26 ******* |
|---|
| 178 | 1 2019-11-22 13:27 ? - |
|---|
| 179 | 2 2019-11-22 14:26 22 *** |
|---|
| 180 | 3 2019-11-22 15:25 ? - |
|---|
| 181 | 4 2019-11-22 16:24 25 ****** |
|---|
| 182 | 5 2019-11-22 17:23 ? - |
|---|
| 183 | 6 2019-11-22 18:22 24 ***** |
|---|
| 184 | 7 2019-11-22 19:21 31 ************ |
|---|
| 185 | 8 2019-11-22 20:20 32 ************* |
|---|
| 186 | ... ..( 3 skipped). .. ************* |
|---|
| 187 | 12 2019-11-23 00:16 32 ************* |
|---|
| 188 | 13 2019-11-23 01:15 31 ************ |
|---|
| 189 | ... ..( 4 skipped). .. ************ |
|---|
| 190 | 18 2019-11-23 06:10 31 ************ |
|---|
| 191 | 19 2019-11-23 07:09 32 ************* |
|---|
| 192 | 20 2019-11-23 08:08 31 ************ |
|---|
| 193 | 21 2019-11-23 09:07 32 ************* |
|---|
| 194 | ... ..( 5 skipped). .. ************* |
|---|
| 195 | 27 2019-11-23 15:01 32 ************* |
|---|
| 196 | 28 2019-11-23 16:00 31 ************ |
|---|
| 197 | 29 2019-11-23 16:59 32 ************* |
|---|
| 198 | ... ..( 2 skipped). .. ************* |
|---|
| 199 | 32 2019-11-23 19:56 32 ************* |
|---|
| 200 | 33 2019-11-23 20:55 31 ************ |
|---|
| 201 | 34 2019-11-23 21:54 34 *************** |
|---|
| 202 | ... ..( 29 skipped). .. *************** |
|---|
| 203 | 64 2019-11-25 03:24 34 *************** |
|---|
| 204 | 65 2019-11-25 04:23 32 ************* |
|---|
| 205 | 66 2019-11-25 05:22 30 *********** |
|---|
| 206 | ... ..( 4 skipped). .. *********** |
|---|
| 207 | 71 2019-11-25 10:17 30 *********** |
|---|
| 208 | |
|---|
| 209 | SCT Error Recovery Control: |
|---|
| 210 | Read: 100 (10.0 seconds) |
|---|
| 211 | Write: 100 (10.0 seconds) |
|---|
| 212 | |
|---|
| 213 | Device Statistics (GP/SMART Log 0x04) not supported |
|---|
| 214 | |
|---|
| 215 | SATA Phy Event Counters (GP Log 0x11) |
|---|
| 216 | ID Size Value Description |
|---|
| 217 | 0x000a 2 33 Device-to-host register FISes sent due to a COMRESET |
|---|
| 218 | 0x0001 2 0 Command failed due to ICRC error |
|---|
| 219 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
|---|
| 220 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
|---|
| 221 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
|---|
| 222 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
|---|
| 223 | |
|---|
