Ticket #1260: smartctl-WDC WD10SPZX-21Z10T0.txt

File smartctl-WDC WD10SPZX-21Z10T0.txt, 9.5 KB (added by Fabio, 4 years ago)

File generated as per FAQ on https://www.smartmontools.org/wiki/FAQ#MyATASATAdriveisnotinthesmartctlsmartddatabase

Line 
1smartctl 6.6 2017-11-05 r4594 [i686-w64-mingw32-w10(64)-b18362] (sf-6.6-1)
2Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: WDC WD10SPZX-21Z10T0
6Serial Number: WD-WXK1AB87NVNE
7LU WWN Device Id: 5 0014ee 65e88a2c7
8Firmware Version: 02.01A02
9User Capacity: 1.000.204.886.016 bytes [1,00 TB]
10Sector Sizes: 512 bytes logical, 4096 bytes physical
11Rotation Rate: 5400 rpm
12Form Factor: 2.5 inches
13Device is: Not in smartctl database [for details use: -P showall]
14ATA Version is: ACS-3 T13/2161-D revision 5
15SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
16Local Time is: Tue Nov 12 06:10:10 2019 HB
17SMART support is: Available - device has SMART capability.
18SMART support is: Enabled
19AAM feature is: Unavailable
20APM level is: 254 (maximum performance)
21Rd look-ahead is: Enabled
22Write cache is: Enabled
23DSN feature is: Unavailable
24ATA Security is: Disabled, frozen [SEC2]
25Wt Cache Reorder: Enabled
26
27=== START OF READ SMART DATA SECTION ===
28SMART overall-health self-assessment test result: PASSED
29
30General SMART Values:
31Offline data collection status: (0x00) Offline data collection activity
32 was never started.
33 Auto Offline Data Collection: Disabled.
34Self-test execution status: ( 0) The previous self-test routine completed
35 without error or no self-test has ever
36 been run.
37Total time to complete Offline
38data collection: (10560) seconds.
39Offline data collection
40capabilities: (0x71) SMART execute Offline immediate.
41 No Auto Offline data collection support.
42 Suspend Offline collection upon new
43 command.
44 No Offline surface scan supported.
45 Self-test supported.
46 Conveyance Self-test supported.
47 Selective Self-test supported.
48SMART capabilities: (0x0003) Saves SMART data before entering
49 power-saving mode.
50 Supports SMART auto save timer.
51Error logging capability: (0x01) Error logging supported.
52 General Purpose Logging supported.
53Short self-test routine
54recommended polling time: ( 2) minutes.
55Extended self-test routine
56recommended polling time: ( 187) minutes.
57Conveyance self-test routine
58recommended polling time: ( 3) minutes.
59SCT capabilities: (0x3035) SCT Status supported.
60 SCT Feature Control supported.
61 SCT Data Table supported.
62
63SMART Attributes Data Structure revision number: 16
64Vendor Specific SMART Attributes with Thresholds:
65ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
66 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
67 3 Spin_Up_Time POS--K 195 186 021 - 1216
68 4 Start_Stop_Count -O--CK 098 098 000 - 2177
69 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
70 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
71 9 Power_On_Hours -O--CK 097 097 000 - 2887
72 10 Spin_Retry_Count -O--CK 100 100 000 - 0
73 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
74 12 Power_Cycle_Count -O--CK 100 100 000 - 523
75191 G-Sense_Error_Rate -O--CK 001 001 000 - 325567
76192 Power-Off_Retract_Count -O--CK 200 200 000 - 80
77193 Load_Cycle_Count -O--CK 200 200 000 - 2144
78194 Temperature_Celsius -O---K 105 093 000 - 38
79196 Reallocated_Event_Count -O--CK 200 200 000 - 0
80197 Current_Pending_Sector -O--CK 200 200 000 - 0
81198 Offline_Uncorrectable ----CK 100 253 000 - 0
82199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
83200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
84 ||||||_ K auto-keep
85 |||||__ C event count
86 ||||___ R error rate
87 |||____ S speed/performance
88 ||_____ O updated online
89 |______ P prefailure warning
90
91General Purpose Log Directory Version 1
92SMART Log Directory Version 1 [multi-sector log support]
93Address Access R/W Size Description
940x00 GPL,SL R/O 1 Log Directory
950x01 SL R/O 1 Summary SMART error log
960x02 SL R/O 5 Comprehensive SMART error log
970x03 GPL R/O 6 Ext. Comprehensive SMART error log
980x06 SL R/O 1 SMART self-test log
990x07 GPL R/O 1 Extended self-test log
1000x09 SL R/W 1 Selective self-test log
1010x10 GPL R/O 1 NCQ Command Error log
1020x11 GPL R/O 1 SATA Phy Event Counters log
1030x24 GPL R/O 288 Current Device Internal Status Data log
1040x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1050x80-0x9f GPL,SL R/W 16 Host vendor specific log
1060xa0-0xa7 GPL,SL VS 16 Device vendor specific log
1070xa8-0xb6 GPL,SL VS 1 Device vendor specific log
1080xb7 GPL,SL VS 74 Device vendor specific log
1090xb9 GPL,SL VS 4 Device vendor specific log
1100xbd GPL,SL VS 1 Device vendor specific log
1110xc0 GPL,SL VS 1 Device vendor specific log
1120xc1 GPL VS 93 Device vendor specific log
1130xe0 GPL,SL R/W 1 SCT Command/Status
1140xe1 GPL,SL R/W 1 SCT Data Transfer
115
116SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
117No Errors Logged
118
119SMART Extended Self-test Log Version: 1 (1 sectors)
120Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
121# 1 Short offline Completed without error 00% 2887 -
122# 2 Short offline Completed without error 00% 2886 -
123# 3 Short offline Completed without error 00% 2828 -
124
125SMART Selective self-test log data structure revision number 1
126 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
127 1 0 0 Not_testing
128 2 0 0 Not_testing
129 3 0 0 Not_testing
130 4 0 0 Not_testing
131 5 0 0 Not_testing
132Selective self-test flags (0x0):
133 After scanning selected spans, do NOT read-scan remainder of disk.
134If Selective self-test is pending on power-up, resume after 0 minute delay.
135
136SCT Status Version: 3
137SCT Version (vendor specific): 258 (0x0102)
138SCT Support Level: 1
139Device State: Active (0)
140Current Temperature: 38 Celsius
141Power Cycle Min/Max Temperature: 35/43 Celsius
142Lifetime Min/Max Temperature: 16/50 Celsius
143Under/Over Temperature Limit Count: 0/0
144Vendor specific:
14501 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
14600 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
147
148SCT Temperature History Version: 2
149Temperature Sampling Period: 1 minute
150Temperature Logging Interval: 1 minute
151Min/Max recommended Temperature: 0/60 Celsius
152Min/Max Temperature Limit: -41/85 Celsius
153Temperature History Size (Index): 128 (71)
154
155Index Estimated Time Temperature Celsius
156 72 2019-11-12 04:03 37 ******************
157 ... ..( 35 skipped). .. ******************
158 108 2019-11-12 04:39 37 ******************
159 109 2019-11-12 04:40 38 *******************
160 ... ..( 3 skipped). .. *******************
161 113 2019-11-12 04:44 38 *******************
162 114 2019-11-12 04:45 39 ********************
163 ... ..( 27 skipped). .. ********************
164 14 2019-11-12 05:13 39 ********************
165 15 2019-11-12 05:14 38 *******************
166 ... ..( 10 skipped). .. *******************
167 26 2019-11-12 05:25 38 *******************
168 27 2019-11-12 05:26 37 ******************
169 ... ..( 6 skipped). .. ******************
170 34 2019-11-12 05:33 37 ******************
171 35 2019-11-12 05:34 36 *****************
172 ... ..( 10 skipped). .. *****************
173 46 2019-11-12 05:45 36 *****************
174 47 2019-11-12 05:46 37 ******************
175 ... ..( 11 skipped). .. ******************
176 59 2019-11-12 05:58 37 ******************
177 60 2019-11-12 05:59 38 *******************
178 ... ..( 10 skipped). .. *******************
179 71 2019-11-12 06:10 38 *******************
180
181SCT Error Recovery Control command not supported
182
183Device Statistics (GP/SMART Log 0x04) not supported
184
185Pending Defects log (GP Log 0x0c) not supported
186
187SATA Phy Event Counters (GP Log 0x11)
188ID Size Value Description
1890x0001 2 0 Command failed due to ICRC error
1900x0002 2 0 R_ERR response for data FIS
1910x0003 2 0 R_ERR response for device-to-host data FIS
1920x0004 2 0 R_ERR response for host-to-device data FIS
1930x0005 2 0 R_ERR response for non-data FIS
1940x0006 2 0 R_ERR response for device-to-host non-data FIS
1950x0007 2 0 R_ERR response for host-to-device non-data FIS
1960x0008 2 0 Device-to-host non-data FIS retries
1970x0009 2 21 Transition from drive PhyRdy to drive PhyNRdy
1980x000a 2 23 Device-to-host register FISes sent due to a COMRESET
1990x000b 2 0 CRC errors within host-to-device FIS
2000x000d 2 0 Non-CRC errors within host-to-device FIS
2010x000f 2 0 R_ERR response for host-to-device data FIS, CRC
2020x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
2030x8000 4 215438 Vendor specific
204