| 1 | smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
|
|---|
| 2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: ST12000NM0538-2K2101
|
|---|
| 6 | Serial Number: ZHxxxxYT
|
|---|
| 7 | LU WWN Device Id: 5 000c50 0b4f28ef8
|
|---|
| 8 | Firmware Version: CMA2
|
|---|
| 9 | User Capacity: 12,000,138,625,024 bytes [12.0 TB]
|
|---|
| 10 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 11 | Rotation Rate: 7200 rpm
|
|---|
| 12 | Form Factor: 3.5 inches
|
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 14 | ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
|
|---|
| 15 | SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 16 | Local Time is: Sun Oct 27 17:45:55 2019 CET
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 | AAM feature is: Unavailable
|
|---|
| 20 | APM feature is: Unavailable
|
|---|
| 21 | Rd look-ahead is: Enabled
|
|---|
| 22 | Write cache is: Enabled
|
|---|
| 23 | DSN feature is: Disabled
|
|---|
| 24 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 25 | Write SCT (Get) Feature Control Command failed: scsi error unsupported field in scsi command
|
|---|
| 26 | Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|---|
| 27 |
|
|---|
| 28 | === START OF READ SMART DATA SECTION ===
|
|---|
| 29 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 30 |
|
|---|
| 31 | General SMART Values:
|
|---|
| 32 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 33 | was completed without error.
|
|---|
| 34 | Auto Offline Data Collection: Enabled.
|
|---|
| 35 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 36 | without error or no self-test has ever
|
|---|
| 37 | been run.
|
|---|
| 38 | Total time to complete Offline
|
|---|
| 39 | data collection: ( 567) seconds.
|
|---|
| 40 | Offline data collection
|
|---|
| 41 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 42 | Auto Offline data collection on/off support.
|
|---|
| 43 | Suspend Offline collection upon new
|
|---|
| 44 | command.
|
|---|
| 45 | Offline surface scan supported.
|
|---|
| 46 | Self-test supported.
|
|---|
| 47 | Conveyance Self-test supported.
|
|---|
| 48 | Selective Self-test supported.
|
|---|
| 49 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 50 | power-saving mode.
|
|---|
| 51 | Supports SMART auto save timer.
|
|---|
| 52 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 53 | General Purpose Logging supported.
|
|---|
| 54 | Short self-test routine
|
|---|
| 55 | recommended polling time: ( 1) minutes.
|
|---|
| 56 | Extended self-test routine
|
|---|
| 57 | recommended polling time: (1173) minutes.
|
|---|
| 58 | Conveyance self-test routine
|
|---|
| 59 | recommended polling time: ( 2) minutes.
|
|---|
| 60 | SCT capabilities: (0x50bd) SCT Status supported.
|
|---|
| 61 | SCT Error Recovery Control supported.
|
|---|
| 62 | SCT Feature Control supported.
|
|---|
| 63 | SCT Data Table supported.
|
|---|
| 64 |
|
|---|
| 65 | SMART Attributes Data Structure revision number: 10
|
|---|
| 66 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 67 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 68 | 1 Raw_Read_Error_Rate POSR-- 100 100 044 - 5928
|
|---|
| 69 | 3 Spin_Up_Time PO---- 098 098 000 - 0
|
|---|
| 70 | 4 Start_Stop_Count -O--CK 100 100 020 - 2
|
|---|
| 71 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|---|
| 72 | 7 Seek_Error_Rate POSR-- 100 253 045 - 27541
|
|---|
| 73 | 9 Power_On_Hours -O--CK 100 100 000 - 1
|
|---|
| 74 | 10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
|---|
| 75 | 12 Power_Cycle_Count -O--CK 100 100 020 - 2
|
|---|
| 76 | 18 Unknown_Attribute PO-R-- 100 100 050 - 0
|
|---|
| 77 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|---|
| 78 | 188 Command_Timeout -O--CK 100 100 000 - 0
|
|---|
| 79 | 190 Airflow_Temperature_Cel -O---K 068 068 040 - 32 (Min/Max 26/32)
|
|---|
| 80 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1
|
|---|
| 81 | 193 Load_Cycle_Count -O--CK 100 100 000 - 12
|
|---|
| 82 | 194 Temperature_Celsius -O---K 032 040 000 - 32 (0 26 0 0 0)
|
|---|
| 83 | 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 5928
|
|---|
| 84 | 197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
|---|
| 85 | 198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
|---|
| 86 | 199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0
|
|---|
| 87 | 200 Multi_Zone_Error_Rate PO---K 100 100 001 - 0
|
|---|
| 88 | 240 Head_Flying_Hours ------ 100 253 000 - 0 (116 117 0)
|
|---|
| 89 | 241 Total_LBAs_Written ------ 100 253 000 - 0
|
|---|
| 90 | 242 Total_LBAs_Read ------ 100 253 000 - 5928
|
|---|
| 91 | ||||||_ K auto-keep
|
|---|
| 92 | |||||__ C event count
|
|---|
| 93 | ||||___ R error rate
|
|---|
| 94 | |||____ S speed/performance
|
|---|
| 95 | ||_____ O updated online
|
|---|
| 96 | |______ P prefailure warning
|
|---|
| 97 |
|
|---|
| 98 | General Purpose Log Directory Version 1
|
|---|
| 99 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 100 | Address Access R/W Size Description
|
|---|
| 101 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 102 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 103 | 0x02 SL R/O 5 Comprehensive SMART error log
|
|---|
| 104 | 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
|---|
| 105 | 0x04 GPL R/O 256 Device Statistics log
|
|---|
| 106 | 0x04 SL R/O 8 Device Statistics log
|
|---|
| 107 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 108 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 109 | 0x08 GPL R/O 2 Power Conditions log
|
|---|
| 110 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 111 | 0x0a GPL R/W 8 Device Statistics Notification
|
|---|
| 112 | 0x0c GPL R/O 2048 Pending Defects log
|
|---|
| 113 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 114 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 115 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
|---|
| 116 | 0x15 GPL R/W 1 Rebuild Assist log
|
|---|
| 117 | 0x21 GPL R/O 1 Write stream error log
|
|---|
| 118 | 0x22 GPL R/O 1 Read stream error log
|
|---|
| 119 | 0x24 GPL R/O 768 Current Device Internal Status Data log
|
|---|
| 120 | 0x2f GPL - 1 Set Sector Configuration
|
|---|
| 121 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 122 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 123 | 0xa1 GPL,SL VS 24 Device vendor specific log
|
|---|
| 124 | 0xa2 GPL VS 16320 Device vendor specific log
|
|---|
| 125 | 0xa4 GPL,SL VS 160 Device vendor specific log
|
|---|
| 126 | 0xa6 GPL VS 192 Device vendor specific log
|
|---|
| 127 | 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log
|
|---|
| 128 | 0xab GPL VS 1 Device vendor specific log
|
|---|
| 129 | 0xad GPL VS 16 Device vendor specific log
|
|---|
| 130 | 0xbc GPL VS 1 Device vendor specific log
|
|---|
| 131 | 0xbe-0xbf GPL VS 65535 Device vendor specific log
|
|---|
| 132 | 0xc1 GPL,SL VS 8 Device vendor specific log
|
|---|
| 133 | 0xc3 GPL,SL VS 32 Device vendor specific log
|
|---|
| 134 | 0xc9 GPL,SL VS 8 Device vendor specific log
|
|---|
| 135 | 0xca GPL,SL VS 16 Device vendor specific log
|
|---|
| 136 | 0xd1 GPL VS 336 Device vendor specific log
|
|---|
| 137 | 0xd2 GPL VS 10000 Device vendor specific log
|
|---|
| 138 | 0xd4 GPL VS 2048 Device vendor specific log
|
|---|
| 139 | 0xda GPL,SL VS 1 Device vendor specific log
|
|---|
| 140 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 141 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 142 |
|
|---|
| 143 | SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|---|
| 144 | No Errors Logged
|
|---|
| 145 |
|
|---|
| 146 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 147 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 148 | # 1 Short offline Completed without error 00% 1 -
|
|---|
| 149 | # 2 Short offline Completed without error 00% 0 -
|
|---|
| 150 | # 3 Conveyance offline Completed without error 00% 0 -
|
|---|
| 151 |
|
|---|
| 152 | SMART Selective self-test log data structure revision number 1
|
|---|
| 153 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 154 | 1 0 0 Not_testing
|
|---|
| 155 | 2 0 0 Not_testing
|
|---|
| 156 | 3 0 0 Not_testing
|
|---|
| 157 | 4 0 0 Not_testing
|
|---|
| 158 | 5 0 0 Not_testing
|
|---|
| 159 | Selective self-test flags (0x0):
|
|---|
| 160 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 161 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 162 |
|
|---|
| 163 | SCT Status Version: 3
|
|---|
| 164 | SCT Version (vendor specific): 522 (0x020a)
|
|---|
| 165 | SCT Support Level: 1
|
|---|
| 166 | Device State: Active (0)
|
|---|
| 167 | Current Temperature: 32 Celsius
|
|---|
| 168 | Power Cycle Min/Max Temperature: 26/32 Celsius
|
|---|
| 169 | Lifetime Min/Max Temperature: 25/32 Celsius
|
|---|
| 170 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 171 | Vendor specific:
|
|---|
| 172 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|---|
| 173 | 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
|
|---|
| 174 |
|
|---|
| 175 | SCT Temperature History Version: 2
|
|---|
| 176 | Temperature Sampling Period: 3 minutes
|
|---|
| 177 | Temperature Logging Interval: 59 minutes
|
|---|
| 178 | Min/Max recommended Temperature: 10/40 Celsius
|
|---|
| 179 | Min/Max Temperature Limit: 5/60 Celsius
|
|---|
| 180 | Temperature History Size (Index): 128 (4)
|
|---|
| 181 |
|
|---|
| 182 | Index Estimated Time Temperature Celsius
|
|---|
| 183 | 5 2019-10-22 13:05 ? -
|
|---|
| 184 | ... ..(121 skipped). .. -
|
|---|
| 185 | 127 2019-10-27 12:03 ? -
|
|---|
| 186 | 0 2019-10-27 13:02 26 *******
|
|---|
| 187 | 1 2019-10-27 14:01 ? -
|
|---|
| 188 | 2 2019-10-27 15:00 25 ******
|
|---|
| 189 | 3 2019-10-27 15:59 ? -
|
|---|
| 190 | 4 2019-10-27 16:58 26 *******
|
|---|
| 191 |
|
|---|
| 192 | SCT Error Recovery Control:
|
|---|
| 193 | Read: 70 (7.0 seconds)
|
|---|
| 194 | Write: 70 (7.0 seconds)
|
|---|
| 195 |
|
|---|
| 196 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 197 |
|
|---|
| 198 | Pending Defects log (GP Log 0x0c) supported [please try: '-l defects']
|
|---|
| 199 |
|
|---|
| 200 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 201 | ID Size Value Description
|
|---|
| 202 | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 203 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 204 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 205 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 206 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 207 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 208 |
|
|---|
