1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-42-generic] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: Hitachi Ultrastar A7K1000
|
---|
6 | Device Model: HITACHI HUA721075KLA330
|
---|
7 | Serial Number: P8H91GWF
|
---|
8 | LU WWN Device Id: 5 000cca 215d23466
|
---|
9 | Firmware Version: GK8OA90A
|
---|
10 | User Capacity: 750,156,374,016 bytes [750 GB]
|
---|
11 | Sector Size: 512 bytes logical/physical
|
---|
12 | Device is: In smartctl database [for details use: -P show]
|
---|
13 | ATA Version is: ATA/ATAPI-7 T13/1532D revision 1
|
---|
14 | Local Time is: Sun Oct 27 12:07:01 2019 PDT
|
---|
15 | SMART support is: Available - device has SMART capability.
|
---|
16 | SMART support is: Enabled
|
---|
17 | AAM level is: 128 (quiet), recommended: 128
|
---|
18 | APM level is: 1 (minimum power consumption with standby)
|
---|
19 | Rd look-ahead is: Enabled
|
---|
20 | Write cache is: Enabled
|
---|
21 | ATA Security is: Disabled, frozen [SEC2]
|
---|
22 | Wt Cache Reorder: Enabled
|
---|
23 |
|
---|
24 | === START OF READ SMART DATA SECTION ===
|
---|
25 | SMART overall-health self-assessment test result: PASSED
|
---|
26 |
|
---|
27 | General SMART Values:
|
---|
28 | Offline data collection status: (0x04) Offline data collection activity
|
---|
29 | was suspended by an interrupting command from host.
|
---|
30 | Auto Offline Data Collection: Disabled.
|
---|
31 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
32 | without error or no self-test has ever
|
---|
33 | been run.
|
---|
34 | Total time to complete Offline
|
---|
35 | data collection: (11471) seconds.
|
---|
36 | Offline data collection
|
---|
37 | capabilities: (0x5b) SMART execute Offline immediate.
|
---|
38 | Auto Offline data collection on/off support.
|
---|
39 | Suspend Offline collection upon new
|
---|
40 | command.
|
---|
41 | Offline surface scan supported.
|
---|
42 | Self-test supported.
|
---|
43 | No Conveyance Self-test supported.
|
---|
44 | Selective Self-test supported.
|
---|
45 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
46 | power-saving mode.
|
---|
47 | Supports SMART auto save timer.
|
---|
48 | Error logging capability: (0x01) Error logging supported.
|
---|
49 | General Purpose Logging supported.
|
---|
50 | Short self-test routine
|
---|
51 | recommended polling time: ( 1) minutes.
|
---|
52 | Extended self-test routine
|
---|
53 | recommended polling time: ( 191) minutes.
|
---|
54 | SCT capabilities: (0x003f) SCT Status supported.
|
---|
55 | SCT Error Recovery Control supported.
|
---|
56 | SCT Feature Control supported.
|
---|
57 | SCT Data Table supported.
|
---|
58 |
|
---|
59 | SMART Attributes Data Structure revision number: 16
|
---|
60 | Vendor Specific SMART Attributes with Thresholds:
|
---|
61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
62 | 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
|
---|
63 | 2 Throughput_Performance P-S--- 130 130 054 - 150
|
---|
64 | 3 Spin_Up_Time POS--- 108 108 024 - 551 (Average 554)
|
---|
65 | 4 Start_Stop_Count -O--C- 100 100 000 - 277
|
---|
66 | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
|
---|
67 | 7 Seek_Error_Rate PO-R-- 100 100 067 - 0
|
---|
68 | 8 Seek_Time_Performance P-S--- 134 134 020 - 32
|
---|
69 | 9 Power_On_Hours -O--C- 100 100 000 - 312
|
---|
70 | 10 Spin_Retry_Count PO--C- 100 100 060 - 0
|
---|
71 | 12 Power_Cycle_Count -O--CK 100 100 000 - 145
|
---|
72 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 282
|
---|
73 | 193 Load_Cycle_Count -O--C- 100 100 000 - 282
|
---|
74 | 194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 15/56)
|
---|
75 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
---|
76 | 197 Current_Pending_Sector -O---K 100 100 000 - 0
|
---|
77 | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
|
---|
78 | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
|
---|
79 | ||||||_ K auto-keep
|
---|
80 | |||||__ C event count
|
---|
81 | ||||___ R error rate
|
---|
82 | |||____ S speed/performance
|
---|
83 | ||_____ O updated online
|
---|
84 | |______ P prefailure warning
|
---|
85 |
|
---|
86 | General Purpose Log Directory Version 1
|
---|
87 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
88 | Address Access R/W Size Description
|
---|
89 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
90 | 0x01 SL R/O 1 Summary SMART error log
|
---|
91 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
---|
92 | 0x06 SL R/O 1 SMART self-test log
|
---|
93 | 0x07 GPL R/O 1 Extended self-test log
|
---|
94 | 0x09 SL R/W 1 Selective self-test log
|
---|
95 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
---|
96 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
97 | 0x24 GPL R/O 60 Current Device Internal Status Data log
|
---|
98 | 0x80 GPL R/W 60 Host vendor specific log
|
---|
99 | 0x81-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
100 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
101 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
102 |
|
---|
103 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
---|
104 | No Errors Logged
|
---|
105 |
|
---|
106 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
107 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
108 | # 1 Short offline Aborted by host 10% 1 -
|
---|
109 | # 2 Short offline Completed without error 00% 63597 -
|
---|
110 |
|
---|
111 | SMART Selective self-test log data structure revision number 1
|
---|
112 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
113 | 1 0 0 Not_testing
|
---|
114 | 2 0 0 Not_testing
|
---|
115 | 3 0 0 Not_testing
|
---|
116 | 4 0 0 Not_testing
|
---|
117 | 5 0 0 Not_testing
|
---|
118 | Selective self-test flags (0x0):
|
---|
119 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
120 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
121 |
|
---|
122 | SCT Status Version: 2
|
---|
123 | SCT Version (vendor specific): 256 (0x0100)
|
---|
124 | SCT Support Level: 1
|
---|
125 | Device State: SMART Off-line Data Collection executing in background (4)
|
---|
126 | Current Temperature: 24 Celsius
|
---|
127 | Power Cycle Max Temperature: 38 Celsius
|
---|
128 | Lifetime Max Temperature: 56 Celsius
|
---|
129 |
|
---|
130 | SCT Temperature History Version: 2
|
---|
131 | Temperature Sampling Period: 1 minute
|
---|
132 | Temperature Logging Interval: 1 minute
|
---|
133 | Min/Max recommended Temperature: 5/60 Celsius
|
---|
134 | Min/Max Temperature Limit: -40/65 Celsius
|
---|
135 | Temperature History Size (Index): 128 (113)
|
---|
136 |
|
---|
137 | Index Estimated Time Temperature Celsius
|
---|
138 | 114 2019-10-27 10:00 25 ******
|
---|
139 | ... ..( 20 skipped). .. ******
|
---|
140 | 7 2019-10-27 10:21 25 ******
|
---|
141 | 8 2019-10-27 10:22 24 *****
|
---|
142 | 9 2019-10-27 10:23 25 ******
|
---|
143 | 10 2019-10-27 10:24 24 *****
|
---|
144 | ... ..(102 skipped). .. *****
|
---|
145 | 113 2019-10-27 12:07 24 *****
|
---|
146 |
|
---|
147 | SCT Error Recovery Control:
|
---|
148 | Read: 70 (7.0 seconds)
|
---|
149 | Write: 70 (7.0 seconds)
|
---|
150 |
|
---|
151 | Device Statistics (GP/SMART Log 0x04) not supported
|
---|
152 |
|
---|
153 | SATA Phy Event Counters (GP Log 0x11)
|
---|
154 | ID Size Value Description
|
---|
155 | 0x0001 2 0 Command failed due to ICRC error
|
---|
156 | 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
|
---|
157 | 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
---|
158 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
159 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
160 |
|
---|