| 1 | smartctl 6.6 (build date Sep 24 2019) [x86_64-linux-4.19.62-mod-std-ipv6-64-rescue] (local build) |
|---|
| 2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 3 | |
|---|
| 4 | === START OF INFORMATION SECTION === |
|---|
| 5 | Vendor: SAMSUNG |
|---|
| 6 | Product: MZILS3T8HMLH/007 |
|---|
| 7 | Revision: GXL0 |
|---|
| 8 | Compliance: SPC-4 |
|---|
| 9 | User Capacity: 3,840,755,982,336 bytes [3.84 TB] |
|---|
| 10 | Logical block size: 512 bytes |
|---|
| 11 | Physical block size: 4096 bytes |
|---|
| 12 | LU is resource provisioned, LBPRZ=1 |
|---|
| 13 | Rotation Rate: Solid State Device |
|---|
| 14 | Form Factor: 2.5 inches |
|---|
| 15 | Logical Unit id: 0x5002538a985d9c20 |
|---|
| 16 | Serial number: S3M5NX0K505108 |
|---|
| 17 | Device type: disk |
|---|
| 18 | Transport protocol: SAS (SPL-3) |
|---|
| 19 | Local Time is: Tue Sep 24 16:34:26 2019 BST |
|---|
| 20 | SMART support is: Available - device has SMART capability. |
|---|
| 21 | SMART support is: Enabled |
|---|
| 22 | Temperature Warning: Enabled |
|---|
| 23 | Read Cache is: Enabled |
|---|
| 24 | Writeback Cache is: Enabled |
|---|
| 25 | |
|---|
| 26 | === START OF READ SMART DATA SECTION === |
|---|
| 27 | SMART Health Status: OK |
|---|
| 28 | |
|---|
| 29 | Percentage used endurance indicator: 0% |
|---|
| 30 | Current Drive Temperature: 33 C |
|---|
| 31 | Drive Trip Temperature: 70 C |
|---|
| 32 | |
|---|
| 33 | Manufactured in week 21 of year 2018 |
|---|
| 34 | Accumulated start-stop cycles: 24 |
|---|
| 35 | Specified load-unload count over device lifetime: 0 |
|---|
| 36 | Accumulated load-unload cycles: 0 |
|---|
| 37 | Elements in grown defect list: 0 |
|---|
| 38 | |
|---|
| 39 | Error counter log: |
|---|
| 40 | Errors Corrected by Total Correction Gigabytes Total |
|---|
| 41 | ECC rereads/ errors algorithm processed uncorrected |
|---|
| 42 | fast | delayed rewrites corrected invocations [10^9 bytes] errors |
|---|
| 43 | read: 0 0 0 0 0 777.428 0 |
|---|
| 44 | write: 0 0 0 0 0 4861.125 0 |
|---|
| 45 | |
|---|
| 46 | Non-medium error count: 15893874 |
|---|
| 47 | |
|---|
| 48 | SMART Self-test log |
|---|
| 49 | Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] |
|---|
| 50 | Description number (hours) |
|---|
| 51 | # 1 Background short Completed - 8317 - [- - -] |
|---|
| 52 | # 2 Background short Completed - 8316 - [- - -] |
|---|
| 53 | # 3 Background short Completed - 7580 - [- - -] |
|---|
| 54 | # 4 Background short Completed - 7579 - [- - -] |
|---|
| 55 | # 5 Background short Completed - 7326 - [- - -] |
|---|
| 56 | # 6 Background short Completed - 7326 - [- - -] |
|---|
| 57 | # 7 Background short Completed - 6366 - [- - -] |
|---|
| 58 | # 8 Background short Completed - 6366 - [- - -] |
|---|
| 59 | # 9 Background short Completed - 5505 - [- - -] |
|---|
| 60 | #10 Background short Completed - 5505 - [- - -] |
|---|
| 61 | #11 Background short Completed - 5149 - [- - -] |
|---|
| 62 | #12 Background short Completed - 5148 - [- - -] |
|---|
| 63 | #13 Background short Completed - 5134 - [- - -] |
|---|
| 64 | #14 Background short Completed - 5134 - [- - -] |
|---|
| 65 | #15 Background short Completed - 5127 - [- - -] |
|---|
| 66 | #16 Background short Completed - 5126 - [- - -] |
|---|
| 67 | #17 Background short Completed - 5115 - [- - -] |
|---|
| 68 | #18 Background short Completed - 5114 - [- - -] |
|---|
| 69 | #19 Background short Completed - 4241 - [- - -] |
|---|
| 70 | #20 Background short Completed - 4241 - [- - -] |
|---|
| 71 | |
|---|
| 72 | Long (extended) Self Test duration: 3600 seconds [60.0 minutes] |
|---|
| 73 | |
|---|
| 74 | Background scan results log |
|---|
| 75 | Status: scan is active |
|---|
| 76 | Accumulated power on time, hours:minutes 9224:23 [553463 minutes] |
|---|
| 77 | Number of background scans performed: 11, scan progress: 71.19% |
|---|
| 78 | Number of background medium scans performed: 11 |
|---|
| 79 | |
|---|
| 80 | Protocol Specific port log page for SAS SSP |
|---|
| 81 | relative target port id = 1 |
|---|
| 82 | generation code = 109 |
|---|
| 83 | number of phys = 1 |
|---|
| 84 | phy identifier = 0 |
|---|
| 85 | attached device type: expander device |
|---|
| 86 | attached reason: SMP phy control function |
|---|
| 87 | reason: loss of dword synchronization |
|---|
| 88 | negotiated logical link rate: phy enabled; 12 Gbps |
|---|
| 89 | attached initiator port: ssp=0 stp=0 smp=0 |
|---|
| 90 | attached target port: ssp=0 stp=0 smp=1 |
|---|
| 91 | SAS address = 0x5002538a985d9c22 |
|---|
| 92 | attached SAS address = 0x5003048026d0cd7f |
|---|
| 93 | attached phy identifier = 12 |
|---|
| 94 | Invalid DWORD count = 1297 |
|---|
| 95 | Running disparity error count = 1295 |
|---|
| 96 | Loss of DWORD synchronization = 8 |
|---|
| 97 | Phy reset problem = 0 |
|---|
| 98 | Phy event descriptors: |
|---|
| 99 | Received ERROR count: 14 |
|---|
| 100 | Received address frame error count: 0 |
|---|
| 101 | Received abandon-class OPEN_REJECT count: 0 |
|---|
| 102 | Received retry-class OPEN_REJECT count: 0 |
|---|
| 103 | Received SSP frame error count: 0 |
|---|
| 104 | relative target port id = 2 |
|---|
| 105 | generation code = 109 |
|---|
| 106 | number of phys = 1 |
|---|
| 107 | phy identifier = 1 |
|---|
| 108 | attached device type: expander device |
|---|
| 109 | attached reason: SMP phy control function |
|---|
| 110 | reason: loss of dword synchronization |
|---|
| 111 | negotiated logical link rate: phy enabled; 12 Gbps |
|---|
| 112 | attached initiator port: ssp=0 stp=0 smp=0 |
|---|
| 113 | attached target port: ssp=0 stp=0 smp=1 |
|---|
| 114 | SAS address = 0x5002538a985d9c23 |
|---|
| 115 | attached SAS address = 0x5003048026d042ff |
|---|
| 116 | attached phy identifier = 12 |
|---|
| 117 | Invalid DWORD count = 0 |
|---|
| 118 | Running disparity error count = 0 |
|---|
| 119 | Loss of DWORD synchronization = 0 |
|---|
| 120 | Phy reset problem = 0 |
|---|
| 121 | Phy event descriptors: |
|---|
| 122 | Received ERROR count: 0 |
|---|
| 123 | Received address frame error count: 0 |
|---|
| 124 | Received abandon-class OPEN_REJECT count: 0 |
|---|
| 125 | Received retry-class OPEN_REJECT count: 5 |
|---|
| 126 | Received SSP frame error count: 0 |
|---|
| 127 | |
|---|
