1 | smartctl 7.0 2019-03-31 r4903 [x86_64-linux-5.1.6-300.fc30.x86_64] (local build)
|
---|
2 | Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: SandForce Driven SSDs
|
---|
6 | Device Model: SanDisk SDSSDA240G
|
---|
7 | Serial Number: xxxxxxxxxxxx
|
---|
8 | LU WWN Device Id: 5 001b44 f02ea0ef8
|
---|
9 | Firmware Version: Z22000RL
|
---|
10 | User Capacity: 240,057,409,536 bytes [240 GB]
|
---|
11 | Sector Size: 512 bytes logical/physical
|
---|
12 | Rotation Rate: Solid State Device
|
---|
13 | Form Factor: 1.8 inches
|
---|
14 | Device is: In smartctl database [for details use: -P show]
|
---|
15 | ATA Version is: ACS-2 T13/2015-D revision 3
|
---|
16 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
17 | SMART support is: Available - device has SMART capability.
|
---|
18 | SMART support is: Enabled
|
---|
19 | AAM feature is: Unavailable
|
---|
20 | APM feature is: Disabled
|
---|
21 | Rd look-ahead is: Disabled
|
---|
22 | Write cache is: Enabled
|
---|
23 | DSN feature is: Unavailable
|
---|
24 | ATA Security is: Disabled, frozen [SEC2]
|
---|
25 | Wt Cache Reorder: Unavailable
|
---|
26 |
|
---|
27 | === START OF READ SMART DATA SECTION ===
|
---|
28 | SMART overall-health self-assessment test result: PASSED
|
---|
29 |
|
---|
30 | General SMART Values:
|
---|
31 | Offline data collection status: (0x02) Offline data collection activity
|
---|
32 | was completed without error.
|
---|
33 | Auto Offline Data Collection: Disabled.
|
---|
34 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
35 | without error or no self-test has ever
|
---|
36 | been run.
|
---|
37 | Total time to complete Offline
|
---|
38 | data collection: ( 0) seconds.
|
---|
39 | Offline data collection
|
---|
40 | capabilities: (0x71) SMART execute Offline immediate.
|
---|
41 | No Auto Offline data collection support.
|
---|
42 | Suspend Offline collection upon new
|
---|
43 | command.
|
---|
44 | No Offline surface scan supported.
|
---|
45 | Self-test supported.
|
---|
46 | Conveyance Self-test supported.
|
---|
47 | Selective Self-test supported.
|
---|
48 | SMART capabilities: (0x0002) Does not save SMART data before
|
---|
49 | entering power-saving mode.
|
---|
50 | Supports SMART auto save timer.
|
---|
51 | Error logging capability: (0x01) Error logging supported.
|
---|
52 | General Purpose Logging supported.
|
---|
53 | Short self-test routine
|
---|
54 | recommended polling time: ( 2) minutes.
|
---|
55 | Extended self-test routine
|
---|
56 | recommended polling time: ( 10) minutes.
|
---|
57 | Conveyance self-test routine
|
---|
58 | recommended polling time: ( 2) minutes.
|
---|
59 |
|
---|
60 | SMART Attributes Data Structure revision number: 1
|
---|
61 | Vendor Specific SMART Attributes with Thresholds:
|
---|
62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
63 | 5 Retired_Block_Count -O--CK 100 100 000 - 0
|
---|
64 | 9 Power_On_Hours_and_Msec -O--CK 040 100 000 - 40h+00m+00.000s
|
---|
65 | 12 Power_Cycle_Count -O--CK 100 100 000 - 310
|
---|
66 | 166 Unknown_Attribute -O--CK 100 100 000 - 1
|
---|
67 | 167 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
68 | 168 Unknown_Attribute -O--CK 100 100 000 - 4
|
---|
69 | 169 Unknown_Attribute -O--CK 100 100 000 - 45
|
---|
70 | 170 Reserve_Block_Count -O--CK 100 100 000 - 0
|
---|
71 | 171 Program_Fail_Count -O--CK 100 100 000 - 0
|
---|
72 | 172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
---|
73 | 173 Unknown_SandForce_Attr -O--CK 100 100 --- - 2
|
---|
74 | 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 17
|
---|
75 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
---|
76 | 194 Temperature_Celsius -O---K 066 100 000 - 34 (Min/Max 0/45)
|
---|
77 | 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0
|
---|
78 | 230 Life_Curve_Status -O--CK 100 100 000 - 0
|
---|
79 | 232 Available_Reservd_Space PO--CK 100 100 004 - 100
|
---|
80 | 233 SandForce_Internal -O--CK 100 100 000 - 645
|
---|
81 | 241 Lifetime_Writes_GiB ----CK 253 253 000 - 559
|
---|
82 | 242 Lifetime_Reads_GiB ----CK 253 253 000 - 1089
|
---|
83 | ||||||_ K auto-keep
|
---|
84 | |||||__ C event count
|
---|
85 | ||||___ R error rate
|
---|
86 | |||____ S speed/performance
|
---|
87 | ||_____ O updated online
|
---|
88 | |______ P prefailure warning
|
---|
89 |
|
---|
90 | General Purpose Log Directory Version 1
|
---|
91 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
92 | Address Access R/W Size Description
|
---|
93 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
94 | 0x01 GPL,SL R/O 1 Summary SMART error log
|
---|
95 | 0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
---|
96 | 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
---|
97 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
98 | 0x06 GPL,SL R/O 1 SMART self-test log
|
---|
99 | 0x07 GPL,SL R/O 1 Extended self-test log
|
---|
100 | 0x09 GPL,SL R/W 1 Selective self-test log
|
---|
101 | 0x10 GPL,SL R/O 1 NCQ Command Error log
|
---|
102 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
---|
103 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
104 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
105 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
106 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
107 |
|
---|
108 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
---|
109 | No Errors Logged
|
---|
110 |
|
---|
111 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
112 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
113 | # 1 Short offline Completed without error 00% 36 -
|
---|
114 | # 2 Reserved (0x1b) Completed without error 00% 35 -
|
---|
115 | # 3 Vendor (0x44) Self-test routine in progress 20% 30 -
|
---|
116 | # 4 Short offline Unknown status (0xb) 10% 18 -
|
---|
117 | # 5 Short offline Completed without error 00% 5 -
|
---|
118 |
|
---|
119 | SMART Selective self-test log data structure revision number 1
|
---|
120 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
121 | 1 0 0 Not_testing
|
---|
122 | 2 0 0 Not_testing
|
---|
123 | 3 0 0 Not_testing
|
---|
124 | 4 0 0 Not_testing
|
---|
125 | 5 0 0 Not_testing
|
---|
126 | Selective self-test flags (0x0):
|
---|
127 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
128 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
129 |
|
---|
130 | SCT Commands not supported
|
---|
131 |
|
---|
132 | Device Statistics (GP Log 0x04)
|
---|
133 | Page Offset Size Value Flags Description
|
---|
134 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
---|
135 | 0x01 0x008 4 310 --- Lifetime Power-On Resets
|
---|
136 | 0x01 0x010 4 40 --- Power-on Hours
|
---|
137 | 0x01 0x018 6 559 --- Logical Sectors Written
|
---|
138 | 0x01 0x020 6 9158358 --- Number of Write Commands
|
---|
139 | 0x01 0x028 6 1089 --- Logical Sectors Read
|
---|
140 | 0x01 0x030 6 22501819 --- Number of Read Commands
|
---|
141 | 0x02 ===== = = === == Free-Fall Statistics (empty) ==
|
---|
142 | 0x03 ===== = = === == Rotating Media Statistics (empty) ==
|
---|
143 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
---|
144 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
---|
145 | 0x04 0x010 4 36 --- Resets Between Cmd Acceptance and Completion
|
---|
146 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
---|
147 | 0x05 0x008 1 34 --- Current Temperature
|
---|
148 | 0x05 0x010 1 64 --- Average Short Term Temperature
|
---|
149 | 0x05 0x018 1 29 --- Average Long Term Temperature
|
---|
150 | 0x05 0x020 1 40 --- Highest Temperature
|
---|
151 | 0x05 0x028 1 8 --- Lowest Temperature
|
---|
152 | 0x05 0x030 1 65 --- Highest Average Short Term Temperature
|
---|
153 | 0x05 0x038 1 7 --- Lowest Average Short Term Temperature
|
---|
154 | 0x05 0x040 1 -1 --- Highest Average Long Term Temperature
|
---|
155 | 0x05 0x048 1 0 --- Lowest Average Long Term Temperature
|
---|
156 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
---|
157 | 0x05 0x058 1 100 --- Specified Maximum Operating Temperature
|
---|
158 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
---|
159 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
---|
160 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
---|
161 | 0x06 0x008 4 1654 --- Number of Hardware Resets
|
---|
162 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
---|
163 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
164 | 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
---|
165 | |||_ C monitored condition met
|
---|
166 | ||__ D supports DSN
|
---|
167 | |___ N normalized value
|
---|
168 |
|
---|
169 | Pending Defects log (GP Log 0x0c) not supported
|
---|
170 |
|
---|
171 | SATA Phy Event Counters (GP Log 0x11)
|
---|
172 | ID Size Value Description
|
---|
173 | 0x0001 2 0 Command failed due to ICRC error
|
---|
174 | 0x0002 2 0 R_ERR response for data FIS
|
---|
175 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
176 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
177 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
178 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
179 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
180 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
181 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
182 | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
---|
183 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
184 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
185 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
186 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
187 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
188 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
189 |
|
---|