1 | smartctl 7.0 2018-12-30 r4883 [x86_64-w64-mingw32-w10-1809] (sf-7.0-1) |
---|
2 | Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Model Family: Samsung based SSDs |
---|
6 | Device Model: SAMSUNG MZNLF128HCHP-000H1 |
---|
7 | Serial Number: xxxxxxxxxxxxxx |
---|
8 | LU WWN Device Id: 5 002538 7400ad5f1 |
---|
9 | Firmware Version: FXT21H1Q |
---|
10 | User Capacity: 128,035,676,160 bytes [128 GB] |
---|
11 | Sector Size: 512 bytes logical/physical |
---|
12 | Rotation Rate: Solid State Device |
---|
13 | Device is: In smartctl database [for details use: -P show] |
---|
14 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c |
---|
15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) |
---|
16 | Local Time is: Sun Jul 28 17:20:02 2019 RTZST |
---|
17 | SMART support is: Available - device has SMART capability. |
---|
18 | SMART support is: Enabled |
---|
19 | AAM feature is: Unavailable |
---|
20 | APM feature is: Unavailable |
---|
21 | Rd look-ahead is: Enabled |
---|
22 | Write cache is: Enabled |
---|
23 | DSN feature is: Unavailable |
---|
24 | ATA Security is: Disabled, frozen [SEC2] |
---|
25 | Wt Cache Reorder: Unavailable |
---|
26 | |
---|
27 | === START OF READ SMART DATA SECTION === |
---|
28 | SMART overall-health self-assessment test result: PASSED |
---|
29 | |
---|
30 | General SMART Values: |
---|
31 | Offline data collection status: (0x82) Offline data collection activity |
---|
32 | was completed without error. |
---|
33 | Auto Offline Data Collection: Enabled. |
---|
34 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
35 | without error or no self-test has ever |
---|
36 | been run. |
---|
37 | Total time to complete Offline |
---|
38 | data collection: ( 1800) seconds. |
---|
39 | Offline data collection |
---|
40 | capabilities: (0x5b) SMART execute Offline immediate. |
---|
41 | Auto Offline data collection on/off support. |
---|
42 | Suspend Offline collection upon new |
---|
43 | command. |
---|
44 | Offline surface scan supported. |
---|
45 | Self-test supported. |
---|
46 | No Conveyance Self-test supported. |
---|
47 | Selective Self-test supported. |
---|
48 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
49 | power-saving mode. |
---|
50 | Supports SMART auto save timer. |
---|
51 | Error logging capability: (0x01) Error logging supported. |
---|
52 | General Purpose Logging supported. |
---|
53 | Short self-test routine |
---|
54 | recommended polling time: ( 2) minutes. |
---|
55 | Extended self-test routine |
---|
56 | recommended polling time: ( 30) minutes. |
---|
57 | |
---|
58 | SMART Attributes Data Structure revision number: 1 |
---|
59 | Vendor Specific SMART Attributes with Thresholds: |
---|
60 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
61 | 1 Raw_Read_Error_Rate POSR-K 199 199 002 - 5 |
---|
62 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 |
---|
63 | 9 Power_On_Hours -O--CK 092 092 001 - 4987 |
---|
64 | 11 Unknown_SSD_Attribute -O---K 099 099 001 - 144 |
---|
65 | 12 Power_Cycle_Count -O--CK 097 097 001 - 2303 |
---|
66 | 170 Unused_Rsvd_Blk_Ct_Chip PO--CK 100 100 010 - 1066 |
---|
67 | 171 Program_Fail_Count_Chip -O---K 100 100 010 - 0 |
---|
68 | 172 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0 |
---|
69 | 173 Wear_Leveling_Count PO--CK 097 097 005 - 46 |
---|
70 | 174 Unexpect_Power_Loss_Ct -O--CK 099 099 001 - 144 |
---|
71 | 183 Runtime_Bad_Block -O--CK 100 100 001 - 0 |
---|
72 | 184 End-to-End_Error PO--CK 100 100 097 - 0 |
---|
73 | 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 5 |
---|
74 | 188 Command_Timeout -O--CK 100 100 000 - 0 |
---|
75 | 190 Airflow_Temperature_Cel -O---K 062 045 040 - 38 |
---|
76 | 196 Reallocated_Event_Count -O--CK 253 253 001 - 0 |
---|
77 | 198 Offline_Uncorrectable ----CK 100 100 001 - 0 |
---|
78 | 199 CRC_Error_Count -O---K 100 100 001 - 0 |
---|
79 | ||||||_ K auto-keep |
---|
80 | |||||__ C event count |
---|
81 | ||||___ R error rate |
---|
82 | |||____ S speed/performance |
---|
83 | ||_____ O updated online |
---|
84 | |______ P prefailure warning |
---|
85 | |
---|
86 | General Purpose Log Directory Version 1 |
---|
87 | SMART Log Directory Version 1 [multi-sector log support] |
---|
88 | Address Access R/W Size Description |
---|
89 | 0x00 GPL,SL R/O 1 Log Directory |
---|
90 | 0x01 SL R/O 1 Summary SMART error log |
---|
91 | 0x02 SL R/O 1 Comprehensive SMART error log |
---|
92 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log |
---|
93 | 0x04 GPL,SL R/O 3 Device Statistics log |
---|
94 | 0x06 SL R/O 1 SMART self-test log |
---|
95 | 0x07 GPL R/O 1 Extended self-test log |
---|
96 | 0x09 SL R/W 1 Selective self-test log |
---|
97 | 0x10 GPL R/O 1 NCQ Command Error log |
---|
98 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
---|
99 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log |
---|
100 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
101 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
102 | 0xb6 GPL,SL VS 127 Device vendor specific log |
---|
103 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
104 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
105 | |
---|
106 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
---|
107 | Device Error Count: 5 (device log contains only the most recent 4 errors) |
---|
108 | CR = Command Register |
---|
109 | FEATR = Features Register |
---|
110 | COUNT = Count (was: Sector Count) Register |
---|
111 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 |
---|
112 | LH = LBA High (was: Cylinder High) Register ] LBA |
---|
113 | LM = LBA Mid (was: Cylinder Low) Register ] Register |
---|
114 | LL = LBA Low (was: Sector Number) Register ] |
---|
115 | DV = Device (was: Device/Head) Register |
---|
116 | DC = Device Control Register |
---|
117 | ER = Error register |
---|
118 | ST = Status register |
---|
119 | Powered_Up_Time is measured from power on, and printed as |
---|
120 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, |
---|
121 | SS=sec, and sss=millisec. It "wraps" after 49.710 days. |
---|
122 | |
---|
123 | Error 5 [0] occurred at disk power-on lifetime: 3665 hours (152 days + 17 hours) |
---|
124 | When the command that caused the error occurred, the device was active or idle. |
---|
125 | |
---|
126 | After command completion occurred, registers were: |
---|
127 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
128 | -- -- -- == -- == == == -- -- -- -- -- |
---|
129 | 40 -- 51 00 40 00 00 00 00 00 14 40 00 Error: UNC at LBA = 0x00000014 = 20 |
---|
130 | |
---|
131 | Commands leading to the command that caused the error were: |
---|
132 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
133 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
134 | 60 00 01 00 40 00 00 00 00 00 14 40 08 00:02:31.000 READ FPDMA QUEUED |
---|
135 | 60 00 01 00 38 00 00 00 00 00 13 40 07 00:02:31.000 READ FPDMA QUEUED |
---|
136 | 60 00 01 00 30 00 00 00 00 00 12 40 06 00:02:31.000 READ FPDMA QUEUED |
---|
137 | 60 00 01 00 28 00 00 00 00 00 11 40 05 00:02:31.000 READ FPDMA QUEUED |
---|
138 | 60 00 01 00 20 00 00 00 00 00 10 40 04 00:02:31.000 READ FPDMA QUEUED |
---|
139 | |
---|
140 | Error 4 [3] occurred at disk power-on lifetime: 3525 hours (146 days + 21 hours) |
---|
141 | When the command that caused the error occurred, the device was active or idle. |
---|
142 | |
---|
143 | After command completion occurred, registers were: |
---|
144 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
145 | -- -- -- == -- == == == -- -- -- -- -- |
---|
146 | 40 -- 51 00 20 00 00 00 00 00 10 40 00 Error: UNC at LBA = 0x00000010 = 16 |
---|
147 | |
---|
148 | Commands leading to the command that caused the error were: |
---|
149 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
150 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
151 | 60 00 01 00 20 00 00 00 00 00 10 40 04 00:00:30.000 READ FPDMA QUEUED |
---|
152 | 60 00 01 00 18 00 00 00 00 00 0f 40 03 00:00:30.000 READ FPDMA QUEUED |
---|
153 | 60 00 01 00 10 00 00 00 00 00 0e 40 02 00:00:30.000 READ FPDMA QUEUED |
---|
154 | 60 00 01 00 08 00 00 00 00 00 0d 40 01 00:00:30.000 READ FPDMA QUEUED |
---|
155 | 60 00 01 00 f8 00 00 00 00 00 0c 40 1f 00:00:30.000 READ FPDMA QUEUED |
---|
156 | |
---|
157 | Error 3 [2] occurred at disk power-on lifetime: 3483 hours (145 days + 3 hours) |
---|
158 | When the command that caused the error occurred, the device was active or idle. |
---|
159 | |
---|
160 | After command completion occurred, registers were: |
---|
161 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
162 | -- -- -- == -- == == == -- -- -- -- -- |
---|
163 | 40 -- 51 00 40 00 00 00 00 00 14 40 00 Error: UNC at LBA = 0x00000014 = 20 |
---|
164 | |
---|
165 | Commands leading to the command that caused the error were: |
---|
166 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
167 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
168 | 60 00 01 00 40 00 00 00 00 00 14 40 08 00:00:13.000 READ FPDMA QUEUED |
---|
169 | 60 00 01 00 38 00 00 00 00 00 13 40 07 00:00:13.000 READ FPDMA QUEUED |
---|
170 | 60 00 01 00 30 00 00 00 00 00 12 40 06 00:00:13.000 READ FPDMA QUEUED |
---|
171 | 60 00 01 00 28 00 00 00 00 00 11 40 05 00:00:13.000 READ FPDMA QUEUED |
---|
172 | 60 00 01 00 20 00 00 00 00 00 10 40 04 00:00:13.000 READ FPDMA QUEUED |
---|
173 | |
---|
174 | Error 2 [1] occurred at disk power-on lifetime: 3348 hours (139 days + 12 hours) |
---|
175 | When the command that caused the error occurred, the device was active or idle. |
---|
176 | |
---|
177 | After command completion occurred, registers were: |
---|
178 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
179 | -- -- -- == -- == == == -- -- -- -- -- |
---|
180 | 40 -- 51 00 40 00 00 00 00 00 14 40 00 Error: UNC at LBA = 0x00000014 = 20 |
---|
181 | |
---|
182 | Commands leading to the command that caused the error were: |
---|
183 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
184 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
185 | 60 00 01 00 40 00 00 00 00 00 14 40 08 00:00:17.000 READ FPDMA QUEUED |
---|
186 | 60 00 01 00 38 00 00 00 00 00 13 40 07 00:00:17.000 READ FPDMA QUEUED |
---|
187 | 60 00 01 00 30 00 00 00 00 00 12 40 06 00:00:17.000 READ FPDMA QUEUED |
---|
188 | 60 00 01 00 28 00 00 00 00 00 11 40 05 00:00:17.000 READ FPDMA QUEUED |
---|
189 | 60 00 01 00 20 00 00 00 00 00 10 40 04 00:00:17.000 READ FPDMA QUEUED |
---|
190 | |
---|
191 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
192 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
193 | # 1 Extended offline Completed without error 00% 4987 - |
---|
194 | # 2 Short offline Completed without error 00% 4985 - |
---|
195 | # 3 Selective offline Aborted by host 90% 4968 - |
---|
196 | # 4 Short offline Aborted by host 90% 4968 - |
---|
197 | # 5 Extended offline Aborted by host 90% 4780 - |
---|
198 | # 6 Extended offline Aborted by host 90% 4776 - |
---|
199 | # 7 Short offline Aborted by host 90% 4762 - |
---|
200 | # 8 Extended offline Completed without error 00% 4632 - |
---|
201 | # 9 Short offline Completed without error 00% 4631 - |
---|
202 | #10 Short offline Aborted by host 90% 4622 - |
---|
203 | #11 Extended offline Aborted by host 90% 4622 - |
---|
204 | #12 Extended offline Completed without error 00% 4482 - |
---|
205 | #13 Extended offline Aborted by host 90% 4476 - |
---|
206 | #14 Short offline Completed without error 00% 4471 - |
---|
207 | #15 Extended offline Interrupted (host reset) 90% 4114 - |
---|
208 | #16 Extended offline Aborted by host 90% 4050 - |
---|
209 | #17 Extended offline Completed without error 00% 3988 - |
---|
210 | #18 Extended offline Completed without error 00% 3930 - |
---|
211 | #19 Extended offline Completed without error 00% 3877 - |
---|
212 | |
---|
213 | Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. |
---|
214 | SMART Selective self-test log data structure revision number 1 |
---|
215 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
216 | 1 0 10 Not_testing |
---|
217 | 2 0 0 Not_testing |
---|
218 | 3 0 0 Not_testing |
---|
219 | 4 0 0 Not_testing |
---|
220 | 5 0 0 Not_testing |
---|
221 | 255 0 65535 Read_scanning was completed without error |
---|
222 | Selective self-test flags (0x0): |
---|
223 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
224 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
225 | |
---|
226 | SCT Commands not supported |
---|
227 | |
---|
228 | Device Statistics (GP Log 0x04) |
---|
229 | Page Offset Size Value Flags Description |
---|
230 | 0x01 ===== = = === == General Statistics (rev 2) == |
---|
231 | 0x01 0x018 6 6900035863 --- Logical Sectors Written |
---|
232 | 0x01 0x028 6 6047666992 --- Logical Sectors Read |
---|
233 | 0x01 0x1f8 7 - N--+ Unknown |
---|
234 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
---|
235 | 0x05 0x008 1 38 --- Current Temperature |
---|
236 | 0x05 0x020 1 47 --- Highest Temperature |
---|
237 | 0x05 0x028 1 26 --- Lowest Temperature |
---|
238 | |||_ C monitored condition met |
---|
239 | ||__ D supports DSN |
---|
240 | |___ N normalized value |
---|
241 | |
---|
242 | Pending Defects log (GP Log 0x0c) not supported |
---|
243 | |
---|
244 | SATA Phy Event Counters (GP Log 0x11) |
---|
245 | ID Size Value Description |
---|
246 | 0x0001 2 0 Command failed due to ICRC error |
---|
247 | 0x0002 2 0 R_ERR response for data FIS |
---|
248 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
249 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
250 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
251 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
252 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
253 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
254 | 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy |
---|
255 | 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET |
---|
256 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
257 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
---|
258 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
259 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
---|
260 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
261 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
---|
262 | |
---|