| 1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-32-generic] (local build) |
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 3 | |
|---|
| 4 | === START OF INFORMATION SECTION === |
|---|
| 5 | Device Model: 120GB SATA Flash Drive |
|---|
| 6 | Serial Number: [No Information Found] |
|---|
| 7 | LU WWN Device Id: d 0d0d0d 0d0d0d0d0 |
|---|
| 8 | Firmware Version: SFMB6130 |
|---|
| 9 | User Capacity: 120,034,123,776 bytes [120 GB] |
|---|
| 10 | Sector Size: 512 bytes logical/physical |
|---|
| 11 | Rotation Rate: Solid State Device |
|---|
| 12 | Form Factor: 2.5 inches |
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall] |
|---|
| 14 | ATA Version is: ACS-2 (minor revision not indicated) |
|---|
| 15 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) |
|---|
| 16 | Local Time is: Thu Oct 15 02:23:28 2020 CST |
|---|
| 17 | SMART support is: Available - device has SMART capability. |
|---|
| 18 | SMART support is: Enabled |
|---|
| 19 | AAM feature is: Unavailable |
|---|
| 20 | APM feature is: Unavailable |
|---|
| 21 | Rd look-ahead is: Enabled |
|---|
| 22 | Write cache is: Enabled |
|---|
| 23 | ATA Security is: Disabled, frozen [SEC2] |
|---|
| 24 | Wt Cache Reorder: Unavailable |
|---|
| 25 | |
|---|
| 26 | === START OF READ SMART DATA SECTION === |
|---|
| 27 | SMART overall-health self-assessment test result: PASSED |
|---|
| 28 | |
|---|
| 29 | General SMART Values: |
|---|
| 30 | Offline data collection status: (0x00) Offline data collection activity |
|---|
| 31 | was never started. |
|---|
| 32 | Auto Offline Data Collection: Disabled. |
|---|
| 33 | Self-test execution status: ( 0) The previous self-test routine completed |
|---|
| 34 | without error or no self-test has ever |
|---|
| 35 | been run. |
|---|
| 36 | Total time to complete Offline |
|---|
| 37 | data collection: ( 33) seconds. |
|---|
| 38 | Offline data collection |
|---|
| 39 | capabilities: (0x7b) SMART execute Offline immediate. |
|---|
| 40 | Auto Offline data collection on/off support. |
|---|
| 41 | Suspend Offline collection upon new |
|---|
| 42 | command. |
|---|
| 43 | Offline surface scan supported. |
|---|
| 44 | Self-test supported. |
|---|
| 45 | Conveyance Self-test supported. |
|---|
| 46 | Selective Self-test supported. |
|---|
| 47 | SMART capabilities: (0x0003) Saves SMART data before entering |
|---|
| 48 | power-saving mode. |
|---|
| 49 | Supports SMART auto save timer. |
|---|
| 50 | Error logging capability: (0x01) Error logging supported. |
|---|
| 51 | General Purpose Logging supported. |
|---|
| 52 | Short self-test routine |
|---|
| 53 | recommended polling time: ( 2) minutes. |
|---|
| 54 | Extended self-test routine |
|---|
| 55 | recommended polling time: ( 6) minutes. |
|---|
| 56 | Conveyance self-test routine |
|---|
| 57 | recommended polling time: ( 2) minutes. |
|---|
| 58 | |
|---|
| 59 | SMART Attributes Data Structure revision number: 0 |
|---|
| 60 | Vendor Specific SMART Attributes with Thresholds: |
|---|
| 61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
|---|
| 62 | 9 Power_On_Hours -O--CK 100 100 000 - 0 |
|---|
| 63 | 12 Power_Cycle_Count -O--CK 100 100 000 - 10 |
|---|
| 64 | 163 Unknown_Attribute -O--CK 100 100 000 - 1 |
|---|
| 65 | 164 Unknown_Attribute -O--CK 100 100 000 - 1 |
|---|
| 66 | 166 Unknown_Attribute -O--CK 100 100 000 - 0 |
|---|
| 67 | 167 Unknown_Attribute -O--CK 100 100 000 - 0 |
|---|
| 68 | 168 Unknown_Attribute -O--CK 100 100 000 - 0 |
|---|
| 69 | 171 Unknown_Attribute -O--CK 100 100 000 - 0 |
|---|
| 70 | 172 Unknown_Attribute -O--CK 100 100 000 - 0 |
|---|
| 71 | 175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 |
|---|
| 72 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 9 |
|---|
| 73 | 194 Temperature_Celsius -O---K 060 060 030 - 40 (Min/Max 28/40) |
|---|
| 74 | 231 Temperature_Celsius -O--C- 100 100 000 - 100 |
|---|
| 75 | 241 Total_LBAs_Written -O--CK 100 100 000 - 0 |
|---|
| 76 | ||||||_ K auto-keep |
|---|
| 77 | |||||__ C event count |
|---|
| 78 | ||||___ R error rate |
|---|
| 79 | |||____ S speed/performance |
|---|
| 80 | ||_____ O updated online |
|---|
| 81 | |______ P prefailure warning |
|---|
| 82 | |
|---|
| 83 | General Purpose Log Directory Version 1 |
|---|
| 84 | SMART Log Directory Version 1 [multi-sector log support] |
|---|
| 85 | Address Access R/W Size Description |
|---|
| 86 | 0x00 GPL,SL R/O 1 Log Directory |
|---|
| 87 | 0x01 SL R/O 1 Summary SMART error log |
|---|
| 88 | 0x02 SL R/O 51 Comprehensive SMART error log |
|---|
| 89 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log |
|---|
| 90 | 0x04 GPL,SL R/O 8 Device Statistics log |
|---|
| 91 | 0x06 SL R/O 1 SMART self-test log |
|---|
| 92 | 0x07 GPL R/O 1 Extended self-test log |
|---|
| 93 | 0x09 SL R/W 1 Selective self-test log |
|---|
| 94 | 0x10 GPL R/O 1 SATA NCQ Queued Error log |
|---|
| 95 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
|---|
| 96 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
|---|
| 97 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
|---|
| 98 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
|---|
| 99 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
|---|
| 100 | |
|---|
| 101 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors) |
|---|
| 102 | No Errors Logged |
|---|
| 103 | |
|---|
| 104 | SMART Extended Self-test Log Version: 1 (1 sectors) |
|---|
| 105 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
|---|
| 106 | |
|---|
| 107 | SMART Selective self-test log data structure revision number 1 |
|---|
| 108 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
|---|
| 109 | 1 0 0 Not_testing |
|---|
| 110 | 2 0 0 Not_testing |
|---|
| 111 | 3 0 0 Not_testing |
|---|
| 112 | 4 0 0 Not_testing |
|---|
| 113 | 5 0 0 Not_testing |
|---|
| 114 | Selective self-test flags (0x0): |
|---|
| 115 | After scanning selected spans, do NOT read-scan remainder of disk. |
|---|
| 116 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
|---|
| 117 | |
|---|
| 118 | SCT Commands not supported |
|---|
| 119 | |
|---|
| 120 | Device Statistics (GP Log 0x04) |
|---|
| 121 | Page Offset Size Value Flags Description |
|---|
| 122 | 0x01 ===== = = === == General Statistics (rev 1) == |
|---|
| 123 | 0x01 0x008 4 10 --- Lifetime Power-On Resets |
|---|
| 124 | 0x01 0x010 4 0 --- Power-on Hours |
|---|
| 125 | 0x01 0x018 6 0 --- Logical Sectors Written |
|---|
| 126 | 0x01 0x020 6 0 --- Number of Write Commands |
|---|
| 127 | 0x01 0x028 6 8565 --- Logical Sectors Read |
|---|
| 128 | 0x01 0x030 6 151 --- Number of Read Commands |
|---|
| 129 | 0x01 0x038 6 128400 --- Date and Time TimeStamp |
|---|
| 130 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
|---|
| 131 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |
|---|
| 132 | |||_ C monitored condition met |
|---|
| 133 | ||__ D supports DSN |
|---|
| 134 | |___ N normalized value |
|---|
| 135 | |
|---|
| 136 | SATA Phy Event Counters (GP Log 0x11) |
|---|
| 137 | ID Size Value Description |
|---|
| 138 | 0x0001 2 0 Command failed due to ICRC error |
|---|
| 139 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
|---|
| 140 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
|---|
| 141 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
|---|
| 142 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
|---|
| 143 | 0x0008 2 0 Device-to-host non-data FIS retries |
|---|
| 144 | 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy |
|---|
| 145 | 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET |
|---|
| 146 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
|---|
| 147 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
|---|
| 148 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
|---|
| 149 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
|---|
| 150 | |
|---|
