1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-32-generic] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: SH250-M242 128GB SSD
|
---|
6 | Serial Number: A002041510000000049
|
---|
7 | LU WWN Device Id: c 816200 049d0d0d0
|
---|
8 | Firmware Version: SFMB8120
|
---|
9 | User Capacity: 128,035,676,160 bytes [128 GB]
|
---|
10 | Sector Size: 512 bytes logical/physical
|
---|
11 | Rotation Rate: Solid State Device
|
---|
12 | Form Factor: 2.5 inches
|
---|
13 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
14 | ATA Version is: ACS-2 (minor revision not indicated)
|
---|
15 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
---|
16 | Local Time is: Mon Oct 12 20:00:21 2020 CST
|
---|
17 | SMART support is: Available - device has SMART capability.
|
---|
18 | SMART support is: Enabled
|
---|
19 | AAM feature is: Unavailable
|
---|
20 | APM feature is: Unavailable
|
---|
21 | Rd look-ahead is: Enabled
|
---|
22 | Write cache is: Enabled
|
---|
23 | ATA Security is: Disabled, frozen [SEC2]
|
---|
24 | Wt Cache Reorder: Enabled
|
---|
25 |
|
---|
26 | === START OF READ SMART DATA SECTION ===
|
---|
27 | SMART overall-health self-assessment test result: PASSED
|
---|
28 |
|
---|
29 | General SMART Values:
|
---|
30 | Offline data collection status: (0x00) Offline data collection activity
|
---|
31 | was never started.
|
---|
32 | Auto Offline Data Collection: Disabled.
|
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
34 | without error or no self-test has ever
|
---|
35 | been run.
|
---|
36 | Total time to complete Offline
|
---|
37 | data collection: ( 33) seconds.
|
---|
38 | Offline data collection
|
---|
39 | capabilities: (0x7b) SMART execute Offline immediate.
|
---|
40 | Auto Offline data collection on/off support.
|
---|
41 | Suspend Offline collection upon new
|
---|
42 | command.
|
---|
43 | Offline surface scan supported.
|
---|
44 | Self-test supported.
|
---|
45 | Conveyance Self-test supported.
|
---|
46 | Selective Self-test supported.
|
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
48 | power-saving mode.
|
---|
49 | Supports SMART auto save timer.
|
---|
50 | Error logging capability: (0x01) Error logging supported.
|
---|
51 | General Purpose Logging supported.
|
---|
52 | Short self-test routine
|
---|
53 | recommended polling time: ( 2) minutes.
|
---|
54 | Extended self-test routine
|
---|
55 | recommended polling time: ( 6) minutes.
|
---|
56 | Conveyance self-test routine
|
---|
57 | recommended polling time: ( 2) minutes.
|
---|
58 | SCT capabilities: (0x0039) SCT Status supported.
|
---|
59 | SCT Error Recovery Control supported.
|
---|
60 | SCT Feature Control supported.
|
---|
61 | SCT Data Table supported.
|
---|
62 |
|
---|
63 | SMART Attributes Data Structure revision number: 0
|
---|
64 | Vendor Specific SMART Attributes with Thresholds:
|
---|
65 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
66 | 9 Power_On_Hours -O--CK 100 100 000 - 0
|
---|
67 | 12 Power_Cycle_Count -O--CK 100 100 000 - 3
|
---|
68 | 163 Unknown_Attribute -O--CK 100 100 000 - 1
|
---|
69 | 164 Unknown_Attribute -O--CK 100 100 000 - 1
|
---|
70 | 166 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
71 | 167 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
72 | 168 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
73 | 171 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
74 | 172 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
75 | 175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0
|
---|
76 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 3
|
---|
77 | 194 Temperature_Celsius -O---K 067 067 030 - 33 (Min/Max 27/33)
|
---|
78 | 231 Temperature_Celsius -O--C- 100 100 000 - 100
|
---|
79 | 241 Total_LBAs_Written -O--CK 100 100 000 - 0
|
---|
80 | ||||||_ K auto-keep
|
---|
81 | |||||__ C event count
|
---|
82 | ||||___ R error rate
|
---|
83 | |||____ S speed/performance
|
---|
84 | ||_____ O updated online
|
---|
85 | |______ P prefailure warning
|
---|
86 |
|
---|
87 | General Purpose Log Directory Version 1
|
---|
88 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
89 | Address Access R/W Size Description
|
---|
90 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
91 | 0x01 SL R/O 1 Summary SMART error log
|
---|
92 | 0x02 SL R/O 51 Comprehensive SMART error log
|
---|
93 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
---|
94 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
95 | 0x06 SL R/O 1 SMART self-test log
|
---|
96 | 0x07 GPL R/O 1 Extended self-test log
|
---|
97 | 0x09 SL R/W 1 Selective self-test log
|
---|
98 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
---|
99 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
100 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
101 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
102 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
103 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
104 |
|
---|
105 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
---|
106 | No Errors Logged
|
---|
107 |
|
---|
108 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
109 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
110 |
|
---|
111 | SMART Selective self-test log data structure revision number 1
|
---|
112 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
113 | 1 0 0 Not_testing
|
---|
114 | 2 0 0 Not_testing
|
---|
115 | 3 0 0 Not_testing
|
---|
116 | 4 0 0 Not_testing
|
---|
117 | 5 0 0 Not_testing
|
---|
118 | Selective self-test flags (0x0):
|
---|
119 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
120 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
121 |
|
---|
122 | SCT Status Version: 3
|
---|
123 | SCT Version (vendor specific): 1 (0x0001)
|
---|
124 | SCT Support Level: 0
|
---|
125 | Device State: Active (0)
|
---|
126 | Current Temperature: ? Celsius
|
---|
127 | Power Cycle Min/Max Temperature: ?/ ? Celsius
|
---|
128 | Lifetime Min/Max Temperature: ?/ ? Celsius
|
---|
129 | Under/Over Temperature Limit Count: 0/0
|
---|
130 |
|
---|
131 | SCT Temperature History Version: 2
|
---|
132 | Temperature Sampling Period: 1 minute
|
---|
133 | Temperature Logging Interval: 1 minute
|
---|
134 | Min/Max recommended Temperature: -127/127 Celsius
|
---|
135 | Min/Max Temperature Limit: -127/127 Celsius
|
---|
136 | Temperature History Size (Index): 478 (2)
|
---|
137 |
|
---|
138 | Index Estimated Time Temperature Celsius
|
---|
139 | 3 2020-10-12 12:03 ? -
|
---|
140 | ... ..(476 skipped). .. -
|
---|
141 | 2 2020-10-12 20:00 ? -
|
---|
142 |
|
---|
143 | SCT Error Recovery Control:
|
---|
144 | Read: 80 (8.0 seconds)
|
---|
145 | Write: 80 (8.0 seconds)
|
---|
146 |
|
---|
147 | Device Statistics (GP Log 0x04)
|
---|
148 | Page Offset Size Value Flags Description
|
---|
149 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
---|
150 | 0x01 0x008 4 3 --- Lifetime Power-On Resets
|
---|
151 | 0x01 0x010 4 0 --- Power-on Hours
|
---|
152 | 0x01 0x018 6 0 --- Logical Sectors Written
|
---|
153 | 0x01 0x020 6 0 --- Number of Write Commands
|
---|
154 | 0x01 0x028 6 8466 --- Logical Sectors Read
|
---|
155 | 0x01 0x030 6 160 --- Number of Read Commands
|
---|
156 | 0x01 0x038 6 482000 --- Date and Time TimeStamp
|
---|
157 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
158 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
---|
159 | |||_ C monitored condition met
|
---|
160 | ||__ D supports DSN
|
---|
161 | |___ N normalized value
|
---|
162 |
|
---|
163 | SATA Phy Event Counters (GP Log 0x11)
|
---|
164 | ID Size Value Description
|
---|
165 | 0x0001 2 0 Command failed due to ICRC error
|
---|
166 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
167 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
168 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
169 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
170 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
171 | 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
172 | 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
|
---|
173 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
174 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
175 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
176 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
177 |
|
---|