1 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-50-generic] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: LITEON LDH-256V2S
|
---|
6 | Firmware Version: FD86201
|
---|
7 | User Capacity: 256,060,514,304 bytes [256 GB]
|
---|
8 | Sector Size: 512 bytes logical/physical
|
---|
9 | Rotation Rate: Solid State Device
|
---|
10 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
11 | ATA Version is: ACS-2 (minor revision not indicated)
|
---|
12 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
13 | Local Time is: Mon Jun 3 10:32:57 2019 WEST
|
---|
14 | SMART support is: Available - device has SMART capability.
|
---|
15 | SMART support is: Enabled
|
---|
16 | AAM feature is: Unavailable
|
---|
17 | APM level is: 254 (maximum performance)
|
---|
18 | Rd look-ahead is: Enabled
|
---|
19 | Write cache is: Enabled
|
---|
20 | ATA Security is: Disabled, frozen [SEC2]
|
---|
21 | Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters
|
---|
22 | Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
---|
23 |
|
---|
24 | === START OF READ SMART DATA SECTION ===
|
---|
25 | SMART overall-health self-assessment test result: PASSED
|
---|
26 |
|
---|
27 | General SMART Values:
|
---|
28 | Offline data collection status: (0x02) Offline data collection activity
|
---|
29 | was completed without error.
|
---|
30 | Auto Offline Data Collection: Disabled.
|
---|
31 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
32 | without error or no self-test has ever
|
---|
33 | been run.
|
---|
34 | Total time to complete Offline
|
---|
35 | data collection: ( 0) seconds.
|
---|
36 | Offline data collection
|
---|
37 | capabilities: (0x11) SMART execute Offline immediate.
|
---|
38 | No Auto Offline data collection support.
|
---|
39 | Suspend Offline collection upon new
|
---|
40 | command.
|
---|
41 | No Offline surface scan supported.
|
---|
42 | Self-test supported.
|
---|
43 | No Conveyance Self-test supported.
|
---|
44 | No Selective Self-test supported.
|
---|
45 | SMART capabilities: (0x0002) Does not save SMART data before
|
---|
46 | entering power-saving mode.
|
---|
47 | Supports SMART auto save timer.
|
---|
48 | Error logging capability: (0x01) Error logging supported.
|
---|
49 | General Purpose Logging supported.
|
---|
50 | Short self-test routine
|
---|
51 | recommended polling time: ( 1) minutes.
|
---|
52 | Extended self-test routine
|
---|
53 | recommended polling time: ( 10) minutes.
|
---|
54 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
55 | SCT Error Recovery Control supported.
|
---|
56 | SCT Feature Control supported.
|
---|
57 | SCT Data Table supported.
|
---|
58 |
|
---|
59 | SMART Attributes Data Structure revision number: 1
|
---|
60 | Vendor Specific SMART Attributes with Thresholds:
|
---|
61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
62 | 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
---|
63 | 9 Power_On_Hours -O--CK 100 100 000 - 571
|
---|
64 | 12 Power_Cycle_Count PO---- 100 100 000 - 2651
|
---|
65 | 170 Unknown_Attribute -O--CK 100 100 000 - 0
|
---|
66 | 171 Unknown_Attribute PO---- 100 100 000 - 0
|
---|
67 | 172 Unknown_Attribute PO---- 100 100 000 - 0
|
---|
68 | 173 Unknown_Attribute PO---- 100 100 000 - 11
|
---|
69 | 174 Unknown_Attribute PO---- 100 100 000 - 51
|
---|
70 | 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 0
|
---|
71 | 180 Unused_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 118
|
---|
72 | 184 End-to-End_Error PO--CK 100 100 000 - 0
|
---|
73 | 187 Reported_Uncorrect PO--CK 100 100 000 - 0
|
---|
74 | 194 Temperature_Celsius -O---- 100 100 000 - 45
|
---|
75 | 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 1
|
---|
76 | 233 Media_Wearout_Indicator PO---- 100 100 000 - 16777215
|
---|
77 | 241 Total_LBAs_Written PO---- 100 100 000 - 2168
|
---|
78 | 242 Total_LBAs_Read PO---- 100 100 000 - 4300
|
---|
79 | 249 Unknown_Attribute PO---- 100 100 000 - 2238
|
---|
80 | ||||||_ K auto-keep
|
---|
81 | |||||__ C event count
|
---|
82 | ||||___ R error rate
|
---|
83 | |||____ S speed/performance
|
---|
84 | ||_____ O updated online
|
---|
85 | |______ P prefailure warning
|
---|
86 |
|
---|
87 | General Purpose Log Directory Version 1
|
---|
88 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
89 | Address Access R/W Size Description
|
---|
90 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
91 | 0x01 GPL,SL R/O 1 Summary SMART error log
|
---|
92 | 0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
---|
93 | 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
---|
94 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
95 | 0x06 GPL,SL R/O 1 SMART self-test log
|
---|
96 | 0x07 GPL,SL R/O 1 Extended self-test log
|
---|
97 | 0x08 GPL,SL R/O 1 Power Conditions log
|
---|
98 | 0x09 GPL,SL R/W 1 Selective self-test log
|
---|
99 | 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log
|
---|
100 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
---|
101 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
102 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
103 | 0xdf GPL,SL VS 1 Device vendor specific log
|
---|
104 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
105 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
106 |
|
---|
107 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
---|
108 | No Errors Logged
|
---|
109 |
|
---|
110 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
111 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
112 | # 1 Short offline Completed without error 00% 571 -
|
---|
113 | # 2 Short offline Completed without error 00% 571 -
|
---|
114 |
|
---|
115 | Selective Self-tests/Logging not supported
|
---|
116 |
|
---|
117 | SCT Status Version: 3
|
---|
118 | SCT Version (vendor specific): 0 (0x0000)
|
---|
119 | SCT Support Level: 0
|
---|
120 | Device State: Active (0)
|
---|
121 | Current Temperature: 0 Celsius
|
---|
122 | Power Cycle Max Temperature: 0 Celsius
|
---|
123 | Lifetime Max Temperature: 0 Celsius
|
---|
124 |
|
---|
125 | SCT Temperature History Version: 2
|
---|
126 | Temperature Sampling Period: 0 minutes
|
---|
127 | Temperature Logging Interval: 0 minutes
|
---|
128 | Min/Max recommended Temperature: 0/100 Celsius
|
---|
129 | Min/Max Temperature Limit: 0/100 Celsius
|
---|
130 | Temperature History Size (Index): 128 (127)
|
---|
131 |
|
---|
132 | Index Estimated Time Temperature Celsius
|
---|
133 | 0 2019-06-03 08:25 ? -
|
---|
134 | ... ..(126 skipped). .. -
|
---|
135 | 127 2019-06-03 10:32 ? -
|
---|
136 |
|
---|
137 | SCT Error Recovery Control:
|
---|
138 | Read: Disabled
|
---|
139 | Write: Disabled
|
---|
140 |
|
---|
141 | Device Statistics (GP Log 0x04)
|
---|
142 | Page Offset Size Value Flags Description
|
---|
143 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
---|
144 | 0x01 0x008 4 2651 --- Lifetime Power-On Resets
|
---|
145 | 0x01 0x010 4 571 --- Power-on Hours
|
---|
146 | 0x01 0x018 6 253563795 --- Logical Sectors Written
|
---|
147 | 0x01 0x020 6 53058509 --- Number of Write Commands
|
---|
148 | 0x01 0x028 6 428011790 --- Logical Sectors Read
|
---|
149 | 0x01 0x030 6 176945199 --- Number of Read Commands
|
---|
150 | 0x02 ===== = = === == Free-Fall Statistics (empty) ==
|
---|
151 | 0x03 ===== = = === == Rotating Media Statistics (empty) ==
|
---|
152 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
---|
153 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
---|
154 | 0x04 0x010 4 52 --- Resets Between Cmd Acceptance and Completion
|
---|
155 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
---|
156 | 0x05 0x008 1 55 --- Current Temperature
|
---|
157 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
---|
158 | 0x06 0x008 4 15497 --- Number of Hardware Resets
|
---|
159 | 0x06 0x018 4 1 --- Number of Interface CRC Errors
|
---|
160 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
161 | 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
---|
162 | |||_ C monitored condition met
|
---|
163 | ||__ D supports DSN
|
---|
164 | |___ N normalized value
|
---|
165 |
|
---|
166 | SATA Phy Event Counters (GP Log 0x11)
|
---|
167 | ID Size Value Description
|
---|
168 | 0x0001 2 0 Command failed due to ICRC error
|
---|
169 | 0x0002 2 0 R_ERR response for data FIS
|
---|
170 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
171 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
172 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
173 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
174 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
175 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
176 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
---|
177 | 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
|
---|
178 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
179 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
180 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
181 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
182 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
183 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
184 |
|
---|