Ticket #1192: smartctl-Western_Digital-WD4003FFBX.txt

File smartctl-Western_Digital-WD4003FFBX.txt, 11.6 KB (added by evgeniy, 5 years ago)

smartctl -x /dev/sdX

Line 
1smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.43-1-lts] (local build)
2Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: WDC WD4003FFBX-68MU3N0
6Serial Number: V6GK5E2R
7LU WWN Device Id: 5 000cca 097c7cea9
8Firmware Version: 83.00A83
9User Capacity: 4 000 787 030 016 bytes [4,00 TB]
10Sector Sizes: 512 bytes logical, 4096 bytes physical
11Rotation Rate: 7200 rpm
12Form Factor: 3.5 inches
13Device is: Not in smartctl database [for details use: -P showall]
14ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
15SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
16Local Time is: Fri May 17 02:39:53 2019 MSK
17SMART support is: Available - device has SMART capability.
18SMART support is: Enabled
19AAM feature is: Unavailable
20APM level is: 164 (intermediate level without standby)
21Rd look-ahead is: Enabled
22Write cache is: Enabled
23DSN feature is: Unavailable
24ATA Security is: Disabled, frozen [SEC2]
25Wt Cache Reorder: Enabled
26
27=== START OF READ SMART DATA SECTION ===
28SMART overall-health self-assessment test result: PASSED
29
30General SMART Values:
31Offline data collection status: (0x80) Offline data collection activity
32 was never started.
33 Auto Offline Data Collection: Enabled.
34Self-test execution status: ( 0) The previous self-test routine completed
35 without error or no self-test has ever
36 been run.
37Total time to complete Offline
38data collection: ( 87) seconds.
39Offline data collection
40capabilities: (0x5b) SMART execute Offline immediate.
41 Auto Offline data collection on/off support.
42 Suspend Offline collection upon new
43 command.
44 Offline surface scan supported.
45 Self-test supported.
46 No Conveyance Self-test supported.
47 Selective Self-test supported.
48SMART capabilities: (0x0003) Saves SMART data before entering
49 power-saving mode.
50 Supports SMART auto save timer.
51Error logging capability: (0x01) Error logging supported.
52 General Purpose Logging supported.
53Short self-test routine
54recommended polling time: ( 2) minutes.
55Extended self-test routine
56recommended polling time: ( 459) minutes.
57SCT capabilities: (0x003d) SCT Status supported.
58 SCT Error Recovery Control supported.
59 SCT Feature Control supported.
60 SCT Data Table supported.
61
62SMART Attributes Data Structure revision number: 16
63Vendor Specific SMART Attributes with Thresholds:
64ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
65 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
66 2 Throughput_Performance --S--- 100 100 054 - 0
67 3 Spin_Up_Time POS--- 100 100 024 - 0
68 4 Start_Stop_Count -O--C- 100 100 000 - 2
69 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
70 7 Seek_Error_Rate -O-R-- 100 100 067 - 0
71 8 Seek_Time_Performance --S--- 100 100 020 - 0
72 9 Power_On_Hours -O--C- 100 100 000 - 0
73 10 Spin_Retry_Count -O--C- 100 100 060 - 0
74 12 Power_Cycle_Count -O--CK 100 100 000 - 2
75192 Power-Off_Retract_Count -O--CK 100 100 000 - 4
76193 Load_Cycle_Count -O--C- 100 100 000 - 4
77194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 25/34)
78196 Reallocated_Event_Count -O--CK 100 100 000 - 0
79197 Current_Pending_Sector -O---K 100 100 000 - 0
80198 Offline_Uncorrectable ---R-- 100 100 000 - 0
81199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
82 ||||||_ K auto-keep
83 |||||__ C event count
84 ||||___ R error rate
85 |||____ S speed/performance
86 ||_____ O updated online
87 |______ P prefailure warning
88
89General Purpose Log Directory Version 1
90SMART Log Directory Version 1 [multi-sector log support]
91Address Access R/W Size Description
920x00 GPL,SL R/O 1 Log Directory
930x01 SL R/O 1 Summary SMART error log
940x02 SL R/O 1 Comprehensive SMART error log
950x03 GPL R/O 1 Ext. Comprehensive SMART error log
960x04 GPL R/O 256 Device Statistics log
970x04 SL R/O 255 Device Statistics log
980x06 SL R/O 1 SMART self-test log
990x07 GPL R/O 1 Extended self-test log
1000x08 GPL R/O 2 Power Conditions log
1010x09 SL R/W 1 Selective self-test log
1020x0c GPL R/O 5501 Pending Defects log
1030x10 GPL R/O 1 NCQ Command Error log
1040x11 GPL R/O 1 SATA Phy Event Counters log
1050x12 GPL R/O 1 SATA NCQ Non-Data log
1060x13 GPL R/O 1 SATA NCQ Send and Receive log
1070x15 GPL R/W 1 Rebuild Assist log
1080x21 GPL R/O 1 Write stream error log
1090x22 GPL R/O 1 Read stream error log
1100x24 GPL R/O 256 Current Device Internal Status Data log
1110x25 GPL R/O 256 Saved Device Internal Status Data log
1120x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1130x80-0x9f GPL,SL R/W 16 Host vendor specific log
1140xe0 GPL,SL R/W 1 SCT Command/Status
1150xe1 GPL,SL R/W 1 SCT Data Transfer
116
117SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
118No Errors Logged
119
120SMART Extended Self-test Log Version: 1 (1 sectors)
121Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
122# 1 Short offline Completed without error 00% 0 -
123
124SMART Selective self-test log data structure revision number 1
125 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
126 1 0 0 Not_testing
127 2 0 0 Not_testing
128 3 0 0 Not_testing
129 4 0 0 Not_testing
130 5 0 0 Not_testing
131Selective self-test flags (0x0):
132 After scanning selected spans, do NOT read-scan remainder of disk.
133If Selective self-test is pending on power-up, resume after 0 minute delay.
134
135SCT Status Version: 3
136SCT Version (vendor specific): 256 (0x0100)
137Device State: Active (0)
138Current Temperature: 34 Celsius
139Power Cycle Min/Max Temperature: 26/34 Celsius
140Lifetime Min/Max Temperature: 25/34 Celsius
141Under/Over Temperature Limit Count: 0/0
142
143SCT Temperature History Version: 2
144Temperature Sampling Period: 1 minute
145Temperature Logging Interval: 1 minute
146Min/Max recommended Temperature: 0/60 Celsius
147Min/Max Temperature Limit: -40/70 Celsius
148Temperature History Size (Index): 128 (32)
149
150Index Estimated Time Temperature Celsius
151 33 2019-05-17 00:32 0 -
152 ... ..( 93 skipped). .. -
153 127 2019-05-17 02:06 0 -
154 0 2019-05-17 02:07 26 *******
155 1 2019-05-17 02:08 27 ********
156 2 2019-05-17 02:09 26 *******
157 3 2019-05-17 02:10 26 *******
158 4 2019-05-17 02:11 26 *******
159 5 2019-05-17 02:12 27 ********
160 6 2019-05-17 02:13 27 ********
161 7 2019-05-17 02:14 28 *********
162 8 2019-05-17 02:15 28 *********
163 9 2019-05-17 02:16 29 **********
164 10 2019-05-17 02:17 29 **********
165 11 2019-05-17 02:18 30 ***********
166 12 2019-05-17 02:19 30 ***********
167 13 2019-05-17 02:20 30 ***********
168 14 2019-05-17 02:21 31 ************
169 15 2019-05-17 02:22 31 ************
170 16 2019-05-17 02:23 32 *************
171 ... ..( 5 skipped). .. *************
172 22 2019-05-17 02:29 32 *************
173 23 2019-05-17 02:30 33 **************
174 ... ..( 4 skipped). .. **************
175 28 2019-05-17 02:35 33 **************
176 29 2019-05-17 02:36 34 ***************
177 30 2019-05-17 02:37 34 ***************
178 31 2019-05-17 02:38 34 ***************
179 32 2019-05-17 02:39 0 -
180
181SCT Error Recovery Control:
182 Read: 70 (7,0 seconds)
183 Write: 70 (7,0 seconds)
184
185Device Statistics (GP Log 0x04)
186Page Offset Size Value Flags Description
1870x01 ===== = = === == General Statistics (rev 1) ==
1880x01 0x008 4 2 --- Lifetime Power-On Resets
1890x01 0x010 4 0 --- Power-on Hours
1900x01 0x018 6 2202708 --- Logical Sectors Written
1910x01 0x020 6 4676 --- Number of Write Commands
1920x01 0x028 6 70424 --- Logical Sectors Read
1930x01 0x030 6 679 --- Number of Read Commands
1940x01 0x038 6 1920900 --- Date and Time TimeStamp
1950x03 ===== = = === == Rotating Media Statistics (rev 1) ==
1960x03 0x008 4 0 --- Spindle Motor Power-on Hours
1970x03 0x010 4 0 --- Head Flying Hours
1980x03 0x018 4 4 --- Head Load Events
1990x03 0x020 4 0 --- Number of Reallocated Logical Sectors
2000x03 0x028 4 0 --- Read Recovery Attempts
2010x03 0x030 4 0 --- Number of Mechanical Start Failures
2020x04 ===== = = === == General Errors Statistics (rev 1) ==
2030x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
2040x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
2050x05 ===== = = === == Temperature Statistics (rev 1) ==
2060x05 0x008 1 34 --- Current Temperature
2070x05 0x010 1 - N-- Average Short Term Temperature
2080x05 0x018 1 - N-- Average Long Term Temperature
2090x05 0x020 1 34 --- Highest Temperature
2100x05 0x028 1 25 --- Lowest Temperature
2110x05 0x030 1 - N-- Highest Average Short Term Temperature
2120x05 0x038 1 - N-- Lowest Average Short Term Temperature
2130x05 0x040 1 - N-- Highest Average Long Term Temperature
2140x05 0x048 1 - N-- Lowest Average Long Term Temperature
2150x05 0x050 4 0 --- Time in Over-Temperature
2160x05 0x058 1 60 --- Specified Maximum Operating Temperature
2170x05 0x060 4 0 --- Time in Under-Temperature
2180x05 0x068 1 0 --- Specified Minimum Operating Temperature
2190x06 ===== = = === == Transport Statistics (rev 1) ==
2200x06 0x008 4 4 --- Number of Hardware Resets
2210x06 0x010 4 1 --- Number of ASR Events
2220x06 0x018 4 0 --- Number of Interface CRC Errors
2230xff ===== = = === == Vendor Specific Statistics (rev 1) ==
224 |||_ C monitored condition met
225 ||__ D supports DSN
226 |___ N normalized value
227
228Pending Defects log (GP Log 0x0c)
229No Defects Logged
230
231SATA Phy Event Counters (GP Log 0x11)
232ID Size Value Description
2330x0001 2 0 Command failed due to ICRC error
2340x0002 2 0 R_ERR response for data FIS
2350x0003 2 0 R_ERR response for device-to-host data FIS
2360x0004 2 0 R_ERR response for host-to-device data FIS
2370x0005 2 0 R_ERR response for non-data FIS
2380x0006 2 0 R_ERR response for device-to-host non-data FIS
2390x0007 2 0 R_ERR response for host-to-device non-data FIS
2400x0008 2 0 Device-to-host non-data FIS retries
2410x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
2420x000a 2 4 Device-to-host register FISes sent due to a COMRESET
2430x000b 2 0 CRC errors within host-to-device FIS
2440x000d 2 0 Non-CRC errors within host-to-device FIS
245