1 | smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.11-pmagic64] (local build)
|
---|
2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: 16GB SATA Flash Drive
|
---|
6 | Firmware Version: SFDK004A
|
---|
7 | User Capacity: 16,013,942,784 bytes [16.0 GB]
|
---|
8 | Sector Size: 512 bytes logical/physical
|
---|
9 | Rotation Rate: Solid State Device
|
---|
10 | Form Factor: 2.5 inches
|
---|
11 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
12 | ATA Version is: ACS-2 T13/2015-D revision 3
|
---|
13 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
14 | Local Time is: Wed Apr 3 20:31:50 2019 CDT
|
---|
15 | SMART support is: Available - device has SMART capability.
|
---|
16 | SMART support is: Enabled
|
---|
17 | AAM feature is: Unavailable
|
---|
18 | APM level is: 128 (minimum power consumption without standby)
|
---|
19 | Rd look-ahead is: Enabled
|
---|
20 | Write cache is: Enabled
|
---|
21 | DSN feature is: Unavailable
|
---|
22 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
23 | Wt Cache Reorder: Enabled
|
---|
24 |
|
---|
25 | === START OF READ SMART DATA SECTION ===
|
---|
26 | SMART overall-health self-assessment test result: PASSED
|
---|
27 |
|
---|
28 | General SMART Values:
|
---|
29 | Offline data collection status: (0x00) Offline data collection activity
|
---|
30 | was never started.
|
---|
31 | Auto Offline Data Collection: Disabled.
|
---|
32 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
33 | without error or no self-test has ever
|
---|
34 | been run.
|
---|
35 | Total time to complete Offline
|
---|
36 | data collection: ( 32) seconds.
|
---|
37 | Offline data collection
|
---|
38 | capabilities: (0x5b) SMART execute Offline immediate.
|
---|
39 | Auto Offline data collection on/off support.
|
---|
40 | Suspend Offline collection upon new
|
---|
41 | command.
|
---|
42 | Offline surface scan supported.
|
---|
43 | Self-test supported.
|
---|
44 | No Conveyance Self-test supported.
|
---|
45 | Selective Self-test supported.
|
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
47 | power-saving mode.
|
---|
48 | Supports SMART auto save timer.
|
---|
49 | Error logging capability: (0x01) Error logging supported.
|
---|
50 | General Purpose Logging supported.
|
---|
51 | Short self-test routine
|
---|
52 | recommended polling time: ( 1) minutes.
|
---|
53 | Extended self-test routine
|
---|
54 | recommended polling time: ( 1) minutes.
|
---|
55 | SCT capabilities: (0x0039) SCT Status supported.
|
---|
56 | SCT Error Recovery Control supported.
|
---|
57 | SCT Feature Control supported.
|
---|
58 | SCT Data Table supported.
|
---|
59 |
|
---|
60 | SMART Attributes Data Structure revision number: 0
|
---|
61 | Vendor Specific SMART Attributes with Thresholds:
|
---|
62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
63 | 9 Power_On_Hours -O--C- 100 100 000 - 52
|
---|
64 | 12 Power_Cycle_Count -O--C- 100 100 000 - 16
|
---|
65 | 163 Unknown_Attribute ------ 100 100 001 - 5
|
---|
66 | 164 Unknown_Attribute ------ 100 100 001 - 3
|
---|
67 | 166 Unknown_Attribute ------ 100 100 010 - 0
|
---|
68 | 167 Unknown_Attribute -O---K 100 100 000 - 0
|
---|
69 | 168 Unknown_Attribute -O--C- 100 100 000 - 0
|
---|
70 | 175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
|
---|
71 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 14
|
---|
72 | 194 Temperature_Celsius -O---K 060 060 030 - 40 (Min/Max 30/60)
|
---|
73 | 241 Total_LBAs_Written -O--CK 100 100 000 - 62743561
|
---|
74 | ||||||_ K auto-keep
|
---|
75 | |||||__ C event count
|
---|
76 | ||||___ R error rate
|
---|
77 | |||____ S speed/performance
|
---|
78 | ||_____ O updated online
|
---|
79 | |______ P prefailure warning
|
---|
80 |
|
---|
81 | General Purpose Log Directory Version 1
|
---|
82 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
83 | Address Access R/W Size Description
|
---|
84 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
85 | 0x01 SL R/O 1 Summary SMART error log
|
---|
86 | 0x02 SL R/O 51 Comprehensive SMART error log
|
---|
87 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
---|
88 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
89 | 0x06 SL R/O 1 SMART self-test log
|
---|
90 | 0x07 GPL R/O 1 Extended self-test log
|
---|
91 | 0x09 SL R/W 1 Selective self-test log
|
---|
92 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
93 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
94 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
95 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
96 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
97 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
98 |
|
---|
99 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
---|
100 | No Errors Logged
|
---|
101 |
|
---|
102 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
103 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
104 | # 1 Short offline Completed without error 00% 52 -
|
---|
105 |
|
---|
106 | SMART Selective self-test log data structure revision number 1
|
---|
107 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
108 | 1 0 0 Not_testing
|
---|
109 | 2 0 0 Not_testing
|
---|
110 | 3 0 0 Not_testing
|
---|
111 | 4 0 0 Not_testing
|
---|
112 | 5 0 0 Not_testing
|
---|
113 | Selective self-test flags (0x0):
|
---|
114 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
115 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
116 |
|
---|
117 | SCT Status Version: 3
|
---|
118 | SCT Version (vendor specific): 1 (0x0001)
|
---|
119 | SCT Support Level: 0
|
---|
120 | Device State: Active (0)
|
---|
121 | Current Temperature: 0 Celsius
|
---|
122 | Power Cycle Max Temperature: 0 Celsius
|
---|
123 | Lifetime Max Temperature: 0 Celsius
|
---|
124 |
|
---|
125 | SCT Temperature History Version: 2
|
---|
126 | Temperature Sampling Period: 1 minute
|
---|
127 | Temperature Logging Interval: 1 minute
|
---|
128 | Min/Max recommended Temperature: -127/127 Celsius
|
---|
129 | Min/Max Temperature Limit: -127/127 Celsius
|
---|
130 | Temperature History Size (Index): 478 (59)
|
---|
131 |
|
---|
132 | Index Estimated Time Temperature Celsius
|
---|
133 | 60 2019-04-03 12:34 ? -
|
---|
134 | ... ..(418 skipped). .. -
|
---|
135 | 1 2019-04-03 19:33 ? -
|
---|
136 | 2 2019-04-03 19:34 40 *********************
|
---|
137 | ... ..( 15 skipped). .. *********************
|
---|
138 | 18 2019-04-03 19:50 40 *********************
|
---|
139 | 19 2019-04-03 19:51 ? -
|
---|
140 | ... ..( 9 skipped). .. -
|
---|
141 | 29 2019-04-03 20:01 ? -
|
---|
142 | 30 2019-04-03 20:02 40 *********************
|
---|
143 | ... ..( 17 skipped). .. *********************
|
---|
144 | 48 2019-04-03 20:20 40 *********************
|
---|
145 | 49 2019-04-03 20:21 ? -
|
---|
146 | 50 2019-04-03 20:22 ? -
|
---|
147 | 51 2019-04-03 20:23 ? -
|
---|
148 | 52 2019-04-03 20:24 40 *********************
|
---|
149 | ... ..( 6 skipped). .. *********************
|
---|
150 | 59 2019-04-03 20:31 40 *********************
|
---|
151 |
|
---|
152 | SCT Error Recovery Control:
|
---|
153 | Read: 70 (7.0 seconds)
|
---|
154 | Write: 70 (7.0 seconds)
|
---|
155 |
|
---|
156 | Device Statistics (GP Log 0x04)
|
---|
157 | Page Offset Size Value Flags Description
|
---|
158 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
---|
159 | 0x01 0x008 4 16 --- Lifetime Power-On Resets
|
---|
160 | 0x01 0x018 6 62743561 --- Logical Sectors Written
|
---|
161 | 0x01 0x020 6 283615 --- Number of Write Commands
|
---|
162 | 0x01 0x028 6 63250269 --- Logical Sectors Read
|
---|
163 | 0x01 0x030 6 290428 --- Number of Read Commands
|
---|
164 | 0x01 0x038 6 187200000 --- Date and Time TimeStamp
|
---|
165 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
166 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
---|
167 | |||_ C monitored condition met
|
---|
168 | ||__ D supports DSN
|
---|
169 | |___ N normalized value
|
---|
170 |
|
---|
171 | Pending Defects log (GP Log 0x0c) not supported
|
---|
172 |
|
---|
173 | SATA Phy Event Counters (GP Log 0x11)
|
---|
174 | ID Size Value Description
|
---|
175 | 0x0001 2 0 Command failed due to ICRC error
|
---|
176 | 0x0002 2 0 R_ERR response for data FIS
|
---|
177 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
178 | 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy
|
---|
179 | 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
|
---|
180 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
181 |
|
---|