| 1 | # smartctl -a /dev/sde |
|---|
| 2 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.18-10-pve] (local build) |
|---|
| 3 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 4 | |
|---|
| 5 | === START OF INFORMATION SECTION === |
|---|
| 6 | Device Model: SuperMicro SSD |
|---|
| 7 | Serial Number: SMC0515D90717B6J6896 |
|---|
| 8 | LU WWN Device Id: 5 15d907 17b000896 |
|---|
| 9 | Firmware Version: SOB20R |
|---|
| 10 | User Capacity: 31,675,383,808 bytes [31.6 GB] |
|---|
| 11 | Sector Size: 512 bytes logical/physical |
|---|
| 12 | Rotation Rate: Solid State Device |
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall] |
|---|
| 14 | ATA Version is: ACS-2 (minor revision not indicated) |
|---|
| 15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) |
|---|
| 16 | Local Time is: Mon Mar 11 13:41:22 2019 CET |
|---|
| 17 | SMART support is: Available - device has SMART capability. |
|---|
| 18 | SMART support is: Enabled |
|---|
| 19 | |
|---|
| 20 | === START OF READ SMART DATA SECTION === |
|---|
| 21 | SMART overall-health self-assessment test result: PASSED |
|---|
| 22 | |
|---|
| 23 | General SMART Values: |
|---|
| 24 | Offline data collection status: (0x00) Offline data collection activity |
|---|
| 25 | was never started. |
|---|
| 26 | Auto Offline Data Collection: Disabled. |
|---|
| 27 | Self-test execution status: ( 0) The previous self-test routine completed |
|---|
| 28 | without error or no self-test has ever |
|---|
| 29 | been run. |
|---|
| 30 | Total time to complete Offline |
|---|
| 31 | data collection: ( 0) seconds. |
|---|
| 32 | Offline data collection |
|---|
| 33 | capabilities: (0x71) SMART execute Offline immediate. |
|---|
| 34 | No Auto Offline data collection support. |
|---|
| 35 | Suspend Offline collection upon new |
|---|
| 36 | command. |
|---|
| 37 | No Offline surface scan supported. |
|---|
| 38 | Self-test supported. |
|---|
| 39 | Conveyance Self-test supported. |
|---|
| 40 | Selective Self-test supported. |
|---|
| 41 | SMART capabilities: (0x0002) Does not save SMART data before |
|---|
| 42 | entering power-saving mode. |
|---|
| 43 | Supports SMART auto save timer. |
|---|
| 44 | Error logging capability: (0x01) Error logging supported. |
|---|
| 45 | General Purpose Logging supported. |
|---|
| 46 | Short self-test routine |
|---|
| 47 | recommended polling time: ( 2) minutes. |
|---|
| 48 | Extended self-test routine |
|---|
| 49 | recommended polling time: ( 10) minutes. |
|---|
| 50 | Conveyance self-test routine |
|---|
| 51 | recommended polling time: ( 2) minutes. |
|---|
| 52 | |
|---|
| 53 | SMART Attributes Data Structure revision number: 1 |
|---|
| 54 | Vendor Specific SMART Attributes with Thresholds: |
|---|
| 55 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
|---|
| 56 | 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 |
|---|
| 57 | 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 |
|---|
| 58 | 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 7830 |
|---|
| 59 | 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 14 |
|---|
| 60 | 15 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 61865984 |
|---|
| 61 | 160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 |
|---|
| 62 | 161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 162 |
|---|
| 63 | 163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 11 |
|---|
| 64 | 164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 55249 |
|---|
| 65 | 165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 131 |
|---|
| 66 | 166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 4 |
|---|
| 67 | 167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 26 |
|---|
| 68 | 168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3000 |
|---|
| 69 | 172 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 |
|---|
| 70 | 175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 11 |
|---|
| 71 | 177 Wear_Leveling_Count 0x0000 100 100 000 Old_age Offline - 2 |
|---|
| 72 | 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 |
|---|
| 73 | 187 Reported_Uncorrect 0x0000 100 100 000 Old_age Offline - 0 |
|---|
| 74 | 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 1 |
|---|
| 75 | 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 34 (Min/Max 19/50) |
|---|
| 76 | 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 5499 |
|---|
| 77 | 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0 |
|---|
| 78 | 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 |
|---|
| 79 | 199 UDMA_CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 78 |
|---|
| 80 | 231 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 100 |
|---|
| 81 | 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 |
|---|
| 82 | 233 Media_Wearout_Indicator 0x0000 100 100 000 Old_age Offline - 863 |
|---|
| 83 | 241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 370 |
|---|
| 84 | 242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 222 |
|---|
| 85 | |
|---|
| 86 | SMART Error Log Version: 1 |
|---|
| 87 | No Errors Logged |
|---|
| 88 | |
|---|
| 89 | SMART Self-test log structure revision number 1 |
|---|
| 90 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
|---|
| 91 | |
|---|
| 92 | SMART Selective self-test log data structure revision number 1 |
|---|
| 93 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
|---|
| 94 | 1 0 0 Not_testing |
|---|
| 95 | 2 0 0 Not_testing |
|---|
| 96 | 3 0 0 Not_testing |
|---|
| 97 | 4 0 0 Not_testing |
|---|
| 98 | 5 0 0 Not_testing |
|---|
| 99 | Selective self-test flags (0x0): |
|---|
| 100 | After scanning selected spans, do NOT read-scan remainder of disk. |
|---|
| 101 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
|---|
| 102 | |
|---|
