| 1 | smartctl 6.6 2017-11-05 r4594 [i686-linux-3.13.0-117-generic] (local build)
|
|---|
| 2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: KINGSTON SMS100S232G
|
|---|
| 6 | Firmware Version: S5FAM014
|
|---|
| 7 | User Capacity: 32 017 047 552 bytes [32,0 GB]
|
|---|
| 8 | Sector Size: 512 bytes logical/physical
|
|---|
| 9 | Rotation Rate: Solid State Device
|
|---|
| 10 | Form Factor: < 1.8 inches
|
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 12 | ATA Version is: ATA8-ACS (minor revision not indicated)
|
|---|
| 13 | SATA Version is: SATA 2.6, 3.0 Gb/s
|
|---|
| 14 | Local Time is: Fri Nov 23 15:20:42 2018 +06
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 | AAM feature is: Unavailable
|
|---|
| 18 | APM level is: 254 (maximum performance)
|
|---|
| 19 | Rd look-ahead is: Enabled
|
|---|
| 20 | Write cache is: Enabled
|
|---|
| 21 | DSN feature is: Unavailable
|
|---|
| 22 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 23 | Wt Cache Reorder: Unavailable
|
|---|
| 24 |
|
|---|
| 25 | === START OF READ SMART DATA SECTION ===
|
|---|
| 26 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 27 |
|
|---|
| 28 | General SMART Values:
|
|---|
| 29 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 30 | was never started.
|
|---|
| 31 | Auto Offline Data Collection: Disabled.
|
|---|
| 32 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 33 | without error or no self-test has ever
|
|---|
| 34 | been run.
|
|---|
| 35 | Total time to complete Offline
|
|---|
| 36 | data collection: ( 255) seconds.
|
|---|
| 37 | Offline data collection
|
|---|
| 38 | capabilities: (0x1b) SMART execute Offline immediate.
|
|---|
| 39 | Auto Offline data collection on/off support.
|
|---|
| 40 | Suspend Offline collection upon new
|
|---|
| 41 | command.
|
|---|
| 42 | Offline surface scan supported.
|
|---|
| 43 | Self-test supported.
|
|---|
| 44 | No Conveyance Self-test supported.
|
|---|
| 45 | No Selective Self-test supported.
|
|---|
| 46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 47 | power-saving mode.
|
|---|
| 48 | Supports SMART auto save timer.
|
|---|
| 49 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 50 | General Purpose Logging supported.
|
|---|
| 51 | Short self-test routine
|
|---|
| 52 | recommended polling time: ( 1) minutes.
|
|---|
| 53 | Extended self-test routine
|
|---|
| 54 | recommended polling time: ( 2) minutes.
|
|---|
| 55 |
|
|---|
| 56 | SMART Attributes Data Structure revision number: 16
|
|---|
| 57 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 58 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 59 | 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
|---|
| 60 | 9 Power_On_Hours -O--C- 100 100 000 - 20000
|
|---|
| 61 | 12 Power_Cycle_Count -O--C- 100 100 000 - 402
|
|---|
| 62 | 168 Unknown_Attribute -O--C- 100 100 000 - 0
|
|---|
| 63 | 170 Unknown_Attribute PO---- 100 100 010 - 202
|
|---|
| 64 | 173 Unknown_Attribute -O--C- 100 100 000 - 8520089
|
|---|
| 65 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 319
|
|---|
| 66 | 218 Unknown_Attribute PO-R-- 100 100 050 - 0
|
|---|
| 67 | ||||||_ K auto-keep
|
|---|
| 68 | |||||__ C event count
|
|---|
| 69 | ||||___ R error rate
|
|---|
| 70 | |||____ S speed/performance
|
|---|
| 71 | ||_____ O updated online
|
|---|
| 72 | |______ P prefailure warning
|
|---|
| 73 |
|
|---|
| 74 | General Purpose Log Directory Version 1
|
|---|
| 75 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 76 | Address Access R/W Size Description
|
|---|
| 77 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 78 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 79 | 0x02 SL R/O 51 Comprehensive SMART error log
|
|---|
| 80 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
|---|
| 81 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 82 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 83 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 84 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 85 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 86 |
|
|---|
| 87 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
|---|
| 88 | No Errors Logged
|
|---|
| 89 |
|
|---|
| 90 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 91 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 92 | # 1 Short offline Completed without error 00% 1753 -
|
|---|
| 93 |
|
|---|
| 94 | Selective Self-tests/Logging not supported
|
|---|
| 95 |
|
|---|
| 96 | SCT Commands not supported
|
|---|
| 97 |
|
|---|
| 98 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 99 |
|
|---|
| 100 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 101 |
|
|---|
| 102 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 103 | ID Size Value Description
|
|---|
| 104 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 105 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 106 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 107 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 108 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 109 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 110 | 0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 111 | 0x000a 4 20 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 112 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 113 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 114 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 115 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
