1 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-514.26.2.el7.x86_64] (local build) |
---|
2 | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: D2RSTK251M11-0100.C |
---|
6 | Serial Number: A20YA011308000028 |
---|
7 | LU WWN Device Id: 5 e83a97 059bfb0b2 |
---|
8 | Firmware Version: 3.22E |
---|
9 | User Capacity: 100,030,242,816 bytes [100 GB] |
---|
10 | Sector Size: 512 bytes logical/physical |
---|
11 | Rotation Rate: Solid State Device |
---|
12 | Device is: Not in smartctl database [for details use: -P showall] |
---|
13 | ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 |
---|
14 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) |
---|
15 | Local Time is: Mon Aug 28 09:29:25 2017 EDT |
---|
16 | SMART support is: Available - device has SMART capability. |
---|
17 | SMART support is: Enabled |
---|
18 | AAM feature is: Unavailable |
---|
19 | APM level is: 254 (maximum performance) |
---|
20 | Rd look-ahead is: Disabled |
---|
21 | Write cache is: Enabled |
---|
22 | ATA Security is: Disabled, frozen [SEC2] |
---|
23 | Unexpected SCT status 0x0010 (action_code=4, function_code=2) |
---|
24 | Wt Cache Reorder: N/A |
---|
25 | |
---|
26 | === START OF READ SMART DATA SECTION === |
---|
27 | SMART overall-health self-assessment test result: PASSED |
---|
28 | |
---|
29 | General SMART Values: |
---|
30 | Offline data collection status: (0x02) Offline data collection activity |
---|
31 | was completed without error. |
---|
32 | Auto Offline Data Collection: Disabled. |
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
34 | without error or no self-test has ever |
---|
35 | been run. |
---|
36 | Total time to complete Offline |
---|
37 | data collection: ( 0) seconds. |
---|
38 | Offline data collection |
---|
39 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
40 | Auto Offline data collection on/off support. |
---|
41 | Suspend Offline collection upon new |
---|
42 | command. |
---|
43 | Offline surface scan supported. |
---|
44 | Self-test supported. |
---|
45 | Conveyance Self-test supported. |
---|
46 | Selective Self-test supported. |
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
48 | power-saving mode. |
---|
49 | Supports SMART auto save timer. |
---|
50 | Error logging capability: (0x01) Error logging supported. |
---|
51 | General Purpose Logging supported. |
---|
52 | Short self-test routine |
---|
53 | recommended polling time: ( 1) minutes. |
---|
54 | Extended self-test routine |
---|
55 | recommended polling time: ( 48) minutes. |
---|
56 | Conveyance self-test routine |
---|
57 | recommended polling time: ( 2) minutes. |
---|
58 | SCT capabilities: (0x0025) SCT Status supported. |
---|
59 | SCT Data Table supported. |
---|
60 | |
---|
61 | SMART Attributes Data Structure revision number: 10 |
---|
62 | Vendor Specific SMART Attributes with Thresholds: |
---|
63 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
64 | 1 Raw_Read_Error_Rate PO--CK 112 112 050 - 58712203 |
---|
65 | 5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0 |
---|
66 | 9 Power_On_Hours -O--CK 074 074 000 - 23290 (170 80 0) |
---|
67 | 12 Power_Cycle_Count -O--CK 100 100 000 - 101 |
---|
68 | 13 Read_Soft_Error_Rate -O--CK 050 050 000 - 254043079303307 |
---|
69 | 100 Unknown_Attribute -O--CK 000 000 000 - 4533 |
---|
70 | 170 Unknown_Attribute POSR-K+ 000 000 000 - 17344 |
---|
71 | 171 Unknown_Attribute -O-R-- 000 000 000 - 0 |
---|
72 | 172 Unknown_Attribute -O--CK 000 000 000 - 0 |
---|
73 | 174 Unknown_Attribute ----CK 000 000 000 - 102 |
---|
74 | 177 Wear_Leveling_Count ------ 000 000 000 - 1 |
---|
75 | 181 Program_Fail_Cnt_Total -O-R-- 000 000 000 - 0 |
---|
76 | 182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 |
---|
77 | 184 End-to-End_Error ------ 100 100 090 - 0 |
---|
78 | 187 Reported_Uncorrect --SRC- 100 100 000 - 0 |
---|
79 | 194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 30/30) |
---|
80 | 195 Hardware_ECC_Recovered --SRC- 120 120 000 - 58712203 |
---|
81 | 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 |
---|
82 | 198 Offline_Uncorrectable ----C- 112 112 000 - 246887605075968 |
---|
83 | 199 UDMA_CRC_Error_Count --S--- 200 200 000 - 0 |
---|
84 | 201 Unknown_SSD_Attribute --SRC- 120 120 000 - 58712203 |
---|
85 | 204 Soft_ECC_Correction --SRC- 120 120 000 - 58712203 |
---|
86 | 230 Unknown_SSD_Attribute PO--C- 100 100 000 - 281470681743460 |
---|
87 | 231 Temperature_Celsius PO--C- 094 094 010 - 21474836481 |
---|
88 | 232 Available_Reservd_Space -O--CK 000 000 000 - 33 |
---|
89 | 233 Media_Wearout_Indicator -O--CK 000 000 000 - 4432 |
---|
90 | 234 Unknown_Attribute -O--CK 000 000 000 - 3813 |
---|
91 | 235 Unknown_Attribute PO--CK 100 100 002 - 0 |
---|
92 | 241 Total_LBAs_Written -O--CK 000 000 000 - 3813 |
---|
93 | 242 Total_LBAs_Read -O--CK 000 000 000 - 772 |
---|
94 | ||||||_ K auto-keep |
---|
95 | |||||__ C event count |
---|
96 | ||||___ R error rate |
---|
97 | |||____ S speed/performance |
---|
98 | ||_____ O updated online |
---|
99 | |______ P prefailure warning |
---|
100 | |
---|
101 | General Purpose Log Directory Version 1 |
---|
102 | SMART Log Directory Version 1 [multi-sector log support] |
---|
103 | Address Access R/W Size Description |
---|
104 | 0x00 GPL,SL R/O 1 Log Directory |
---|
105 | 0x03 GPL R/O 16 Ext. Comprehensive SMART error log |
---|
106 | 0x07 GPL R/O 1 Extended self-test log |
---|
107 | 0x09 SL R/W 1 Selective self-test log |
---|
108 | 0x10 GPL R/O 1 NCQ Command Error log |
---|
109 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters |
---|
110 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
111 | 0xa8 GPL,SL VS 16 Device vendor specific log |
---|
112 | 0xb7 GPL,SL VS 16 Device vendor specific log |
---|
113 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
114 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
115 | |
---|
116 | SMART Extended Comprehensive Error Log Version: 1 (16 sectors) |
---|
117 | Device Error Count: 1 |
---|
118 | CR = Command Register |
---|
119 | FEATR = Features Register |
---|
120 | COUNT = Count (was: Sector Count) Register |
---|
121 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 |
---|
122 | LH = LBA High (was: Cylinder High) Register ] LBA |
---|
123 | LM = LBA Mid (was: Cylinder Low) Register ] Register |
---|
124 | LL = LBA Low (was: Sector Number) Register ] |
---|
125 | DV = Device (was: Device/Head) Register |
---|
126 | DC = Device Control Register |
---|
127 | ER = Error register |
---|
128 | ST = Status register |
---|
129 | Powered_Up_Time is measured from power on, and printed as |
---|
130 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, |
---|
131 | SS=sec, and sss=millisec. It "wraps" after 49.710 days. |
---|
132 | |
---|
133 | Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) |
---|
134 | When the command that caused the error occurred, the device was active or idle. |
---|
135 | |
---|
136 | After command completion occurred, registers were: |
---|
137 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
138 | -- -- -- == -- == == == -- -- -- -- -- |
---|
139 | 10 -- 51 00 01 00 00 00 00 00 01 00 00 Error: |
---|
140 | |
---|
141 | Commands leading to the command that caused the error were: |
---|
142 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
143 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
144 | |
---|
145 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
146 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
147 | # 1 Short offline Self-test routine in progress 50% 23290 - |
---|
148 | # 2 Offline Self-test routine in progress 10% 23170 - |
---|
149 | # 3 Offline Self-test routine in progress 20% 23170 - |
---|
150 | # 4 Offline Self-test routine in progress 20% 23170 - |
---|
151 | # 5 Offline Self-test routine in progress 30% 23170 - |
---|
152 | # 6 Offline Self-test routine in progress 40% 23170 - |
---|
153 | # 7 Offline Self-test routine in progress 40% 23170 - |
---|
154 | # 8 Offline Self-test routine in progress 50% 23170 - |
---|
155 | # 9 Offline Self-test routine in progress 60% 23170 - |
---|
156 | #10 Offline Self-test routine in progress 60% 23170 - |
---|
157 | #11 Offline Self-test routine in progress 80% 23169 - |
---|
158 | #12 Extended offline Self-test routine in progress 10% 23160 - |
---|
159 | #13 Extended offline Self-test routine in progress 10% 23160 - |
---|
160 | #14 Extended offline Self-test routine in progress 20% 23160 - |
---|
161 | #15 Extended offline Self-test routine in progress 40% 23159 - |
---|
162 | #16 Extended offline Self-test routine in progress 60% 23159 - |
---|
163 | #17 Extended offline Self-test routine in progress 70% 23159 - |
---|
164 | #18 Extended offline Self-test routine in progress 70% 23159 - |
---|
165 | #19 Extended offline Self-test routine in progress 80% 23159 - |
---|
166 | |
---|
167 | SMART Selective self-test log data structure revision number 1 |
---|
168 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
169 | 1 0 0 Not_testing |
---|
170 | 2 0 0 Not_testing |
---|
171 | 3 0 0 Not_testing |
---|
172 | 4 0 0 Not_testing |
---|
173 | 5 0 0 Not_testing |
---|
174 | Selective self-test flags (0x0): |
---|
175 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
176 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
177 | |
---|
178 | SCT Status Version: 3 |
---|
179 | SCT Version (vendor specific): 0 (0x0000) |
---|
180 | SCT Support Level: 1 |
---|
181 | Device State: Active (0) |
---|
182 | Current Temperature: 30 Celsius |
---|
183 | Power Cycle Min/Max Temperature: 30/30 Celsius |
---|
184 | Lifetime Min/Max Temperature: 30/30 Celsius |
---|
185 | Under/Over Temperature Limit Count: 0/0 |
---|
186 | SCT Temperature History Version: 2 |
---|
187 | Temperature Sampling Period: 0 minutes |
---|
188 | Temperature Logging Interval: 0 minutes |
---|
189 | Min/Max recommended Temperature: ?/ ? Celsius |
---|
190 | Min/Max Temperature Limit: ?/ ? Celsius |
---|
191 | Temperature History Size (Index): 478 (1) |
---|
192 | |
---|
193 | Index Estimated Time Temperature Celsius |
---|
194 | 2 2017-08-28 01:32 ? - |
---|
195 | ... ..(476 skipped). .. - |
---|
196 | 1 2017-08-28 09:29 ? - |
---|
197 | |
---|
198 | SCT Error Recovery Control command not supported |
---|
199 | |
---|
200 | Device Statistics (GP Log 0x04) not supported |
---|
201 | |
---|
202 | SATA Phy Event Counters (GP Log 0x11) |
---|
203 | ID Size Value Description |
---|
204 | 0x0001 2 0 Command failed due to ICRC error |
---|
205 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
206 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
207 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
208 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
209 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
210 | 0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy |
---|
211 | 0x000a 2 18 Device-to-host register FISes sent due to a COMRESET |
---|
212 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
213 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
---|
214 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
215 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
---|
216 | 0x0002 2 0 R_ERR response for data FIS |
---|
217 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
218 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
219 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
---|
220 | |
---|