1 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-514.26.2.el7.x86_64] (local build) |
---|
2 | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: D2RSTK251M11-0100.C |
---|
6 | Serial Number: A20YA011308000035 |
---|
7 | LU WWN Device Id: 5 e83a97 059bfb0b9 |
---|
8 | Firmware Version: 3.22E |
---|
9 | User Capacity: 100,030,242,816 bytes [100 GB] |
---|
10 | Sector Size: 512 bytes logical/physical |
---|
11 | Rotation Rate: Solid State Device |
---|
12 | Device is: Not in smartctl database [for details use: -P showall] |
---|
13 | ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 |
---|
14 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) |
---|
15 | Local Time is: Mon Aug 28 09:29:22 2017 EDT |
---|
16 | SMART support is: Available - device has SMART capability. |
---|
17 | SMART support is: Enabled |
---|
18 | AAM feature is: Unavailable |
---|
19 | APM level is: 254 (maximum performance) |
---|
20 | Rd look-ahead is: Disabled |
---|
21 | Write cache is: Enabled |
---|
22 | ATA Security is: Disabled, frozen [SEC2] |
---|
23 | Unexpected SCT status 0x0010 (action_code=4, function_code=2) |
---|
24 | Wt Cache Reorder: N/A |
---|
25 | |
---|
26 | === START OF READ SMART DATA SECTION === |
---|
27 | SMART overall-health self-assessment test result: PASSED |
---|
28 | |
---|
29 | General SMART Values: |
---|
30 | Offline data collection status: (0x02) Offline data collection activity |
---|
31 | was completed without error. |
---|
32 | Auto Offline Data Collection: Disabled. |
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
34 | without error or no self-test has ever |
---|
35 | been run. |
---|
36 | Total time to complete Offline |
---|
37 | data collection: ( 0) seconds. |
---|
38 | Offline data collection |
---|
39 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
40 | Auto Offline data collection on/off support. |
---|
41 | Suspend Offline collection upon new |
---|
42 | command. |
---|
43 | Offline surface scan supported. |
---|
44 | Self-test supported. |
---|
45 | Conveyance Self-test supported. |
---|
46 | Selective Self-test supported. |
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
48 | power-saving mode. |
---|
49 | Supports SMART auto save timer. |
---|
50 | Error logging capability: (0x01) Error logging supported. |
---|
51 | General Purpose Logging supported. |
---|
52 | Short self-test routine |
---|
53 | recommended polling time: ( 1) minutes. |
---|
54 | Extended self-test routine |
---|
55 | recommended polling time: ( 48) minutes. |
---|
56 | Conveyance self-test routine |
---|
57 | recommended polling time: ( 2) minutes. |
---|
58 | SCT capabilities: (0x0025) SCT Status supported. |
---|
59 | SCT Data Table supported. |
---|
60 | |
---|
61 | SMART Attributes Data Structure revision number: 10 |
---|
62 | Vendor Specific SMART Attributes with Thresholds: |
---|
63 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
64 | 1 Raw_Read_Error_Rate PO--CK 108 108 050 - 18966225 |
---|
65 | 5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0 |
---|
66 | 9 Power_On_Hours -O--CK 074 074 000 - 22809 (109 132 0) |
---|
67 | 12 Power_Cycle_Count -O--CK 100 100 000 - 94 |
---|
68 | 13 Read_Soft_Error_Rate -O--CK 050 050 000 - 46063543215825 |
---|
69 | 100 Unknown_Attribute -O--CK 000 000 000 - 282 |
---|
70 | 170 Unknown_Attribute POSR-K+ 000 000 000 - 16960 |
---|
71 | 171 Unknown_Attribute -O-R-- 000 000 000 - 0 |
---|
72 | 172 Unknown_Attribute -O--CK 000 000 000 - 0 |
---|
73 | 174 Unknown_Attribute ----CK 000 000 000 - 94 |
---|
74 | 177 Wear_Leveling_Count ------ 000 000 000 - 0 |
---|
75 | 181 Program_Fail_Cnt_Total -O-R-- 000 000 000 - 0 |
---|
76 | 182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 |
---|
77 | 184 End-to-End_Error ------ 100 100 090 - 0 |
---|
78 | 187 Reported_Uncorrect --SRC- 100 100 000 - 0 |
---|
79 | 194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 30/30) |
---|
80 | 195 Hardware_ECC_Recovered --SRC- 120 120 000 - 18966225 |
---|
81 | 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 |
---|
82 | 198 Offline_Uncorrectable ----C- 108 108 000 - 113047834198016 |
---|
83 | 199 UDMA_CRC_Error_Count --S--- 200 200 000 - 0 |
---|
84 | 201 Unknown_SSD_Attribute --SRC- 120 120 000 - 18966225 |
---|
85 | 204 Soft_ECC_Correction --SRC- 120 120 000 - 18966225 |
---|
86 | 230 Unknown_SSD_Attribute PO--C- 100 100 000 - 281470681743460 |
---|
87 | 231 Temperature_Celsius PO--C- 080 080 010 - 73014444033 |
---|
88 | 232 Available_Reservd_Space -O--CK 000 000 000 - 33 |
---|
89 | 233 Media_Wearout_Indicator -O--CK 000 000 000 - 211 |
---|
90 | 234 Unknown_Attribute -O--CK 000 000 000 - 157 |
---|
91 | 235 Unknown_Attribute PO--CK 100 100 002 - 0 |
---|
92 | 241 Total_LBAs_Written -O--CK 000 000 000 - 157 |
---|
93 | 242 Total_LBAs_Read -O--CK 000 000 000 - 226 |
---|
94 | ||||||_ K auto-keep |
---|
95 | |||||__ C event count |
---|
96 | ||||___ R error rate |
---|
97 | |||____ S speed/performance |
---|
98 | ||_____ O updated online |
---|
99 | |______ P prefailure warning |
---|
100 | |
---|
101 | General Purpose Log Directory Version 1 |
---|
102 | SMART Log Directory Version 1 [multi-sector log support] |
---|
103 | Address Access R/W Size Description |
---|
104 | 0x00 GPL,SL R/O 1 Log Directory |
---|
105 | 0x03 GPL R/O 16 Ext. Comprehensive SMART error log |
---|
106 | 0x07 GPL R/O 1 Extended self-test log |
---|
107 | 0x09 SL R/W 1 Selective self-test log |
---|
108 | 0x10 GPL R/O 1 NCQ Command Error log |
---|
109 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters |
---|
110 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
111 | 0xa8 GPL,SL VS 16 Device vendor specific log |
---|
112 | 0xb7 GPL,SL VS 16 Device vendor specific log |
---|
113 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
114 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
115 | |
---|
116 | SMART Extended Comprehensive Error Log Version: 1 (16 sectors) |
---|
117 | No Errors Logged |
---|
118 | |
---|
119 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
120 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
121 | # 1 Short offline Self-test routine in progress 20% 22809 - |
---|
122 | # 2 Short offline Self-test routine in progress 30% 22809 - |
---|
123 | # 3 Short offline Self-test routine in progress 60% 22809 - |
---|
124 | |
---|
125 | SMART Selective self-test log data structure revision number 1 |
---|
126 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
127 | 1 0 0 Not_testing |
---|
128 | 2 0 0 Not_testing |
---|
129 | 3 0 0 Not_testing |
---|
130 | 4 0 0 Not_testing |
---|
131 | 5 0 0 Not_testing |
---|
132 | Selective self-test flags (0x0): |
---|
133 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
134 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
135 | |
---|
136 | SCT Status Version: 3 |
---|
137 | SCT Version (vendor specific): 0 (0x0000) |
---|
138 | SCT Support Level: 1 |
---|
139 | Device State: Active (0) |
---|
140 | Current Temperature: 30 Celsius |
---|
141 | Power Cycle Min/Max Temperature: 30/30 Celsius |
---|
142 | Lifetime Min/Max Temperature: 30/30 Celsius |
---|
143 | Under/Over Temperature Limit Count: 0/0 |
---|
144 | SCT Temperature History Version: 2 |
---|
145 | Temperature Sampling Period: 0 minutes |
---|
146 | Temperature Logging Interval: 0 minutes |
---|
147 | Min/Max recommended Temperature: ?/ ? Celsius |
---|
148 | Min/Max Temperature Limit: ?/ ? Celsius |
---|
149 | Temperature History Size (Index): 478 (1) |
---|
150 | |
---|
151 | Index Estimated Time Temperature Celsius |
---|
152 | 2 2017-08-28 01:32 ? - |
---|
153 | ... ..(476 skipped). .. - |
---|
154 | 1 2017-08-28 09:29 ? - |
---|
155 | |
---|
156 | SCT Error Recovery Control command not supported |
---|
157 | |
---|
158 | Device Statistics (GP Log 0x04) not supported |
---|
159 | |
---|
160 | SATA Phy Event Counters (GP Log 0x11) |
---|
161 | ID Size Value Description |
---|
162 | 0x0001 2 0 Command failed due to ICRC error |
---|
163 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
164 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
165 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
166 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
167 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
168 | 0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy |
---|
169 | 0x000a 2 18 Device-to-host register FISes sent due to a COMRESET |
---|
170 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
171 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
---|
172 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
173 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
---|
174 | 0x0002 2 0 R_ERR response for data FIS |
---|
175 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
176 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
177 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
---|
178 | |
---|