| 1 | >smartctl -a /dev/da0 -d sat |
|---|
| 2 | smartctl 6.3 2014-07-26 r3976 [NS-BSD 2.7.4- amd64] (local build) |
|---|
| 3 | Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 4 | |
|---|
| 5 | === START OF INFORMATION SECTION === |
|---|
| 6 | Device Model: SanDisk SD9SB8W1T001122 |
|---|
| 7 | Serial Number: 1823AA800732 |
|---|
| 8 | LU WWN Device Id: 5 001b44 8b6dc84d3 |
|---|
| 9 | Firmware Version: X6107000 |
|---|
| 10 | User Capacity: 1,024,209,543,168 bytes [1,02 TB] |
|---|
| 11 | Sector Size: 512 bytes logical/physical |
|---|
| 12 | Rotation Rate: Solid State Device |
|---|
| 13 | Form Factor: 2.5 inches |
|---|
| 14 | Device is: Not in smartctl database [for details use: -P showall] |
|---|
| 15 | ATA Version is: Unknown(0x0ff0) (unknown minor revision code: 0x005e) |
|---|
| 16 | SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s) |
|---|
| 17 | Local Time is: Fri Jan 18 14:57:08 2019 UTC |
|---|
| 18 | SMART support is: Available - device has SMART capability. |
|---|
| 19 | SMART support is: Enabled |
|---|
| 20 | |
|---|
| 21 | === START OF READ SMART DATA SECTION === |
|---|
| 22 | SMART Status not supported: Incomplete response, ATA output registers missing |
|---|
| 23 | SMART overall-health self-assessment test result: PASSED |
|---|
| 24 | Warning: This result is based on an Attribute check. |
|---|
| 25 | |
|---|
| 26 | General SMART Values: |
|---|
| 27 | Offline data collection status: (0x00) Offline data collection activity |
|---|
| 28 | was never started. |
|---|
| 29 | Auto Offline Data Collection: Disabled. |
|---|
| 30 | Self-test execution status: ( 0) The previous self-test routine completed |
|---|
| 31 | without error or no self-test has ever |
|---|
| 32 | been run. |
|---|
| 33 | Total time to complete Offline |
|---|
| 34 | data collection: ( 0) seconds. |
|---|
| 35 | Offline data collection |
|---|
| 36 | capabilities: (0x11) SMART execute Offline immediate. |
|---|
| 37 | No Auto Offline data collection support. |
|---|
| 38 | Suspend Offline collection upon new |
|---|
| 39 | command. |
|---|
| 40 | No Offline surface scan supported. |
|---|
| 41 | Self-test supported. |
|---|
| 42 | No Conveyance Self-test supported. |
|---|
| 43 | No Selective Self-test supported. |
|---|
| 44 | SMART capabilities: (0x0003) Saves SMART data before entering |
|---|
| 45 | power-saving mode. |
|---|
| 46 | Supports SMART auto save timer. |
|---|
| 47 | Error logging capability: (0x01) Error logging supported. |
|---|
| 48 | General Purpose Logging supported. |
|---|
| 49 | Short self-test routine |
|---|
| 50 | recommended polling time: ( 2) minutes. |
|---|
| 51 | Extended self-test routine |
|---|
| 52 | recommended polling time: ( 10) minutes. |
|---|
| 53 | |
|---|
| 54 | SMART Attributes Data Structure revision number: 4 |
|---|
| 55 | Vendor Specific SMART Attributes with Thresholds: |
|---|
| 56 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
|---|
| 57 | 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 58 | 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 5 |
|---|
| 59 | 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 5 |
|---|
| 60 | 165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 61 | 166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 62 | 167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 112 |
|---|
| 63 | 168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 64 | 169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 853 |
|---|
| 65 | 170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 66 | 171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 67 | 172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 68 | 173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 69 | 174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1 |
|---|
| 70 | 184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 71 | 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 72 | 188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 73 | 194 Temperature_Celsius 0x0022 074 038 --- Old_age Always - 26 (Min/Max 24/38) |
|---|
| 74 | 199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 75 | 230 Unknown_SSD_Attribute 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 76 | 232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100 |
|---|
| 77 | 233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 78 | 234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 |
|---|
| 79 | 241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 0 |
|---|
| 80 | 242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 0 |
|---|
| 81 | 244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0 |
|---|
| 82 | |
|---|
| 83 | SMART Error Log Version: 1 |
|---|
| 84 | No Errors Logged |
|---|
| 85 | |
|---|
| 86 | SMART Self-test log structure revision number 1 |
|---|
| 87 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
|---|
| 88 | |
|---|
| 89 | Selective Self-tests/Logging not supported |
|---|
| 90 | |
|---|
